TECHNICAL DATA SHEET
Document number: TTDS-020
Issue: 4
Date: January 2013 HT-SCE Heat shrinkable sleeves
If the document is printed it becomes uncontrolled
Check with TE Connectivity (TE) for latest version Author: L Smith
Issue date: Jan 2012
Page: 1 of 2
While TE Connectivity Ltd. has made every reasonable effort to ensure the accuracy of the information in this document, TE does
not guarantee that it is error-free, nor does TE make any other representation, warr anty or guarantee that the information is
accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any
time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not
limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for
reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE
for the latest dimensions and design specifications.
MATERIAL DESCRIPTION:
Thin wall, flame retarded radiation cross-linked fluoropolymer heat-
shrinkable sleeve, assembled as organized cut sleeves in a “ladde r”
configuration. 2:1 shrink ratio.
USE: Identification of wires and cables by co mputer-based printing onto
sleeves. Sleeves can also provide terminal insulation and strain
relief. Suitable for many high temperature application s, especially
military and aerospace applications. Can be used in space
applications where low vacuum o utgassing is required.
PRINTING SYSTEM:
Refer to TE document 411-121005 IDENTIFICATION PRINTER
PRODUCT RIBBON MATRIX for the recommended
printer/product/ribbon combination
SERVICE TEMPERATURE: -55C to +225C (-67F to +437F).
MINIMUM RECOVERY
TEMPERATURE:
135C (275F).
MAXIMUM STORAGE
TEMPERATURE:
40C (104F).
COLORS: White or black.
HEAT AGEING: No cracking and print legi ble after 168 hours at 225C (437F).
HEAT SHOCK: No cracking, dripping or flowing and print legible after
4 hours at 275C (527F).
TEMPERATURE CYCLING:
No cracking, dripping o r flowing a nd print legible after 6 cycles from
-196C (-320F) to +200C (+392F).
ULTIMATE ELONGATION:
200% minimum (ASTM D2671).
TENSILE STRENGTH: 24MPa minimum (ASTM D2671).
MOLD GROWTH: Rating 1 maximum (ASTM G21).
FLAMMABILITY: UL 224 VW-1 rated
TECHNICAL DATA SHEET
Document number: TTDS-020
Issue: 4
Date: January 2013 HT-SCE Heat shrinkable sleeves
If the document is printed it becomes uncontrolled
Check with TE Connectivity (TE) for latest version Author: L Smith
Issue date: Jan 2012
Page: 2 of 2
While TE Connectivity Ltd. has made every reasonable effort to ensure the accuracy of the information in this document, TE does
not guarantee that it is error-free, nor does TE make any other representation, warr anty or guarantee that the information is
accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any
time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not
limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for
reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE
for the latest dimensions and design specifications.
VACUUM OUTGASSING:
1% maximum Total Mass Loss (TML) after 24 hours at 130C
(266F); pressure <10-5 Torr. (ASTM-E595)
0.1% maximum Vacuum Condensable Material (V CM) after 24 hours
at 130C (266F); pressure <10-5 Torr; condensing surface at 18C
(64F).
CORROSIVE EFFECT
(COPPER MIRROR):
Non corrosive, 16 hours at 200C (392F), ASTM D2671 Procedure
A.
DIELECTRIC STRENGTH:
20MV/m minimum (ASTM D2671).
VOLUME RESISTIVITY: 1012 cm minimum (ASTM D2671).
PRINT PERMANENCE AFTER
RECOVERY:
Print legible after 100 rubs (SAE AS59421, Print Adherence).
Print legible after 100 strokes (MIL-STD-202G, Method 215).
FLUID RESISTANCE: Fluid immersion for 24 hours at 23 ± 2 °C (73°F) followed by
SAE AS 5942, 1kg load, 20 rubs.
Sodium chloride
(5% by weight in water) Print legible
MIL-T-83133 Aircraft fuel
(JP-8) Print legible
MIL-L-23699 Lubricating oi l Print legible
Propylene glycol de-icing
fluid
(50% solution in water)
Print legible
Aviation gasoline (100/130) Print legible
Skydrol 5002 hydraulic fluid Print legible
See TE specification RW-2512 for full HT-SCE performance & dimensional details.
1 SAE AS 5942 supersedes SAE AS81531 Print Adherence. Product performance ha s not changed.
2 Skydrol is a registered trade mark of Solutia
