USA: 1-888-41-ASTEC Europe (UK): +44(0)1384-842211 Asia (HK): 852-2437-9662
162
AK60C
50 Watts
AK60C Industry Standard Series
Input V oltages
48V
# of Outputs
Single
Total Power
50 Watts
SPECIAL FEATURES
•Industry standard pin-out
and performance
•100°C Baseplate temperature
(no derating)
•Positive and negative enable function
•Low output ripple and noise
•High capacitive load limit on start-up
•Regulation to zero load
•Frequency switching
•Basic insulation
ENVIRONMENTAL
Operating temper ature (baseplate):
-40°C to +100°C
Storage temperature: -55°C to +125°C
Overtemperature protection: 110°C typical
(12V out only)
MTBF: >1 million hours
SAFETY
UL UL1950
CSA22.2-950
TUV EN60950
ELECTRICAL SPECIFICATIONS
Input
Input range............................36-75 VDC
Input Surge............................100V / 100ms
Efficiency...............................84%@5V
Control
Voltage Adjust .......................80 to 110%
Enable...................................TTL compatible
(positive & negative enable options)
Output
Load regulation .....................0.2% max down to no load
Line regulation.......................0.1% max
Ripple and noise ...................150mV max
Remote sense .......................0.5% Vo max
Transient Response ..............6% max deviation with
..............................................50% to 75% full load
..............................................(output 5V and above)
..............................................200mV (output below 5V)
..............................................500 µS (max) recovery
Overvoltage Protection..........140% max (all outputs)
Current Limit..........................150% maxim um output
Switching Frequency.............400 kHz typ
NOTES:
Nominal values apply with sense pins connected to +Vout and Ground
Return with other control pins unconnected.
Specifications subject to change without notice.