C3D02060A VRRM Silicon Carbide Schottky Diode 600 V IF (TC=135C) = 4 A Z-RecTM Rectifier Qc Features * * * * * * * * = = 4.8 nC Package 600-Volt Schottky Rectifier Optimized for PFC Boost Diode Application Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-220-2 Benefits * * * * * Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 Applications * * CASE PIN 2 Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 300W-450W Part Number Package Marking C3D02060A TO-220-2 C3D02060 Maximum Ratings (TC = 25 C unless otherwise specified) Symbol Parameter Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V 8 4 A TC=25C TC=135C TC=162C IF Continuous Forward Current 2 IFRM Repetitive Peak Forward Surge Current 12 9 A TC=25C, tP=10 mS, Half Sine Wave D=0.3 TC=110C, tP=10 mS, Half Sine Wave D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 21 19 A TC=25C, tP=10 mS, Half Sine Wave D=0.3 TC=110C, tP=10 mS, Half Sine Wave D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 65 A TC=25C, tP=10 S, Pulse Ptot Power Dissipation 39.5 17 W TC=25C TC=110C -55 to +175 C 1 8.8 Nm lbf-in TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque 1 Value C3D02060A Rev. D M3 Screw 6-32 Screw Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.5 1.8 1.7 2.4 V IF = 2 A TJ=25C IF = 2 A TJ=175C IR Reverse Current 10 20 50 100 A VR = 600 V TJ=25C VR = 600 V TJ=175C QC Total Capacitive Charge 4.8 nC VR = 600 V, IF = 2A di/dt = 500 A/S TJ = 25C C Total Capacitance 120 12 11 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol Parameter RJC TO-220 Package Thermal Resistance from Junction to Case Typ. Unit 3.8 C/W Typical Performance 1.0E-05 10 4.0 4.0 3.5 3.5 TJ = TJ = TJ = TJ = Reverse Current (A) IR Reverse Current (A) 8.0E-068 2.5 2.5 Forward Current IF Forward Current (A) 3.0 3.0 25C 75C 125C 175C 2.0 2.0 6.0E-066 Current 25C Current 25C Current 75C Current 75C 4 Current 125C4.0E-06 1.5 1.5 1.0 1.0 TJ = 175 0.5 0.5 0.0 0.0 0.5 0.5 1.0 1.5 2.0 2.5 3.0 1.0 1.5 2.0 VF Forward Voltage (V) Forward Voltage Figure 1. Forward Characteristics 2 C3D02060A Rev. D 2.5 3.0 0.0E+000 Current 175C TJ = 125C 2.0E-062 0 0.0 Current 125C TJ = 25C TJ = 75C Current 175C 0 100 200 300 400 500 600 700 800 0 100 200 300 400 500 600 VR Reverse Voltage (V) Reverse Bias (V) Figure 2. Reverse Characteristics 700 800 Typical Performance C3D02060A Current Derating D3_2A_FP 20 20 60 60 18 18 14 14 12 12 50 50 Duty* Duty* Duty* Duty* C Capacitance (pF) 20% 30% 50% 70% DC 10 10 88 C Capacitance (pF) IF(PEAK) Peak Forward Current (A) IF(PEAK) Peak Forward Current (A) 16 16 40 40 30 30 D3_2A_FP 20 20 66 44 10 10 22 00 25 25 00 50 75 100 125 150 175 50 75 100 125 150 175 TC Case Temperature (C) 1 1 10 10 100 100 1000 1000 VR V Reverse Voltage (V) R Reverse Voltage (V) TC Case Temperature (C) * Frequency > 1KHz Figure 3. Current Derating Figure 4. Capacitance vs. Reverse Voltage 1.0E+01 Zth (C/W) 1.0E+00 TBD 1.0E-01 1.0E-02 1.0E-03 1.E-07 1.E-06 1.E-05 1.E-04 1.E-03 Tim e (s) Figure 5. Transient Thermal Impedance 3 C3D02060A Rev. D 1.E-02 1.E-01 1.E+00 Typical Performance 40.0 40 Power Dissipation (W) Power Dissipation (W) 35.0 35 30 30.0 25.0 25 20.0 20 15.0 15 10.0 10 5.0 5 0.0 0 25 50 75 100 125 150 175 25 50 75 100 125 150 175 Tc Case Temperature (C) TC Case Temperature (C) Figure 6. Power Derating Package Dimensions Package TO-220-2 POS A C P F J Q B D X S E Y 1 2 G T Z U H V L M PIN 1 PIN 2 W N CASE Inches Min Millimeters Max Min Max A P OS B A C B D C ED .381 Inc hes M in.235 M ax .410 9.677 M illim eters M in M 5.969 ax .255 .395 .100 .235 .223 .102 .337.590 .337 10.033 .120 5.969 .337 2.591 .615 8.560 10.414 2.540 6.477 5.664 2.845 14.986 8.560 15.621 F E .590.143 .610 .153 14.986 3.632 15.494 3.886 GF G H H J J L L .149 3.785 3.886 1.105 .153 1.147 28.067 29.134 1.127 1.147 28.626 29.134 .500 .550 12.700 13.970 .530 .550 13.462 13.970 R 0.197 R 0.197 R 0.010 R 0.254 .036 .635 .914 .028.025 .036 .711 .914 MM NN .045.045 .055 .195.195 .205 P P Q QS .410 .255 .112 .170 .180 .165 .048 .054 3.048 5 1.143 .055 4.953 .205 10.414 6.477 3.048 8.560 1.397 4.318 .185 1.219 .054 3 1.397 1.143 5.207 4.953 4.572 4.191 1.371 1.219 5 5.207 4.699 1.372 ST 3 3 5 63 5 3 6 TU V U W V X WY 3 3 .100 3 .014 .094 3 .395.014 5 5 3 6 .410 63 2.54 6 .356 .110 3 .025 10.033 2.794 3 .533 2.388 5 .356 10.414 XZ .130 3 .150 3.302 5.5 3.8103 .110 .021 5 6 2.794 .635 5.5 Y .385 .410 9.779 10.414 z .130 .150 3.302 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish 4 C3D02060A Rev. D Recommended Solder Pad Layout TO-220-2 Part Number Package Marking C3D02060A TO-220-2 C3D02060 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering Diode Model Diode Model CSD10060 VfVfT T==VTV+T+If*R If*RT T V -3 -3) 0.98+(T * -1.7*10 VTT==0.92 + (Tj * J-1.35*10 ) -3 -3 R = 0.21+(T * 1.71*10 T J RT= 0.052 + (Tj * 0.29*10 ) ) Note: Tj = Diode Junction Temperature In Degrees Celsius VT 5 C3D02060A Rev. D RT Notes * RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. * REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. * This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright (c) 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C3D02060A Rev. D Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: C3D02060A