CSM_WL_WLM_DS_E_17_3
1
Two-circuit Limit Switch/Long-life Two-circuit Limit Switch
WL/WLM
Wide Range of Two-circuit
Switches; Select One for the
Operating Environment/Application
•A wide selection of models are available, including the
overtravel models with greater OT, indicator-equipped
models for checking operation, low-temperature
models,
heat-resistant models, and corrosion-proof models.
•Microload models are added to the product lineup.
•Approved standards: EC/IEC, UL, CSA, CCC (Chinese
standard).
Contact your OMRON representative for information on
approved models.
The WL-N high-sensitivity, high-precision models have been integrated into the WL Series. Refer
to the model replacement table on page 42 and order high-sensitivity and high-precision models
with the WL model numbers.
Features
Many Variations in Standard Limit Switches
A Wide Range of Models
The WL Series provides a complete range of Limit Switches with a
long history of meeting user needs. Select environment-resistant
specifications, actuators for essentially any workpiece, operating
sensitivity matched to the workpiece, operation indicators to aid
operation and maintenance, and various wiring specifications.
Select from Six Types of Environment Resistance
The series includes Airtight Switches, Hermetic Switches, Heat-
resistant Switches, Low-temperature Switches, Corrosion-proof
switches, and Weather-proof Switches. Select the one required by the
onsite environment.
Excellent Performance on Arc Welding Lines or Sites with
Spattering Cutting Powder
Ideal for Welding Sites
Stainless steel and resins that resist adhesion of spatters are used to
prevent troubles caused by zinc powder generated during welding.
Mechanical Endurance of 30 Million Operations
Long-life Models for High-frequency Applications
Long life has been achieved by increasing the resistance to friction
and creating better sliding properties in the head mechanism. Greater
visibility is provided when setting with a fluorescent display for setting
the stroke.
DPDB Operation
The double-pole, double-break structure ensures circuit braking.
Degree of Protection; IP67
O-rings, cover seals, and other measures provide a water-proof, drip-
proof structure (IP67).
Approved Standards to Aid Export Machines
Various WL/WLM switches are approved by UL, CSA, TÜV, EN/IEC,
and CCC making them ideal for export machines.
High-precision Models Available in All Switch Types;
Ideal for Position Control
High-precision models achieve a very small movement to operation
(approx. 5°) and a repeat accuracy that is twice that of basic models.
Operation Indicators for Easier Daily
Inspections*
Confirm operation with a neon lamp or LED for
easier startup confirmations and maintenance.
* Operation indicators are provided on Indicator-
equipped switches, Spatter-prevention Basic
Switches, and Long-life Basic Switches.
Models with Connectors to Reduce Wiring
Reduce wiring with one-touch connection. Models with direct-wired
and prewired connectors that make Switch replacement easier are
also available.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Be sure to read Safety Precautions on page 43 to 46 and
Safety Precautions for All Limit Switches.
Standard Models
Environment-resistant Models
Spatter-prevention Models
Long-life Models
Features Common to All Models
Load Load
3(NO)
Za
2(NC)
(NO)4
1
2
4
3
(NC)1
Operation
indicator
WL/WLM
2
Product Configuration
Selection by Purpose
The WL-N high-sensitivity, high-precision models have been integrated into the WL Series. If you are scheduled to use
the WL-N high-sensitivity, high-precision models, refer to the model replacement table on page 42 and order high-
sensitivity and high-precision models with the WL model numbers.
General-
purpose
Standard
Operation indicators
Sensor I/O connectors
WL Series
WLM Series
Environment-resistant
Spatter-prevention
Selection Points
Selection Points
Selection Points
Selection Points
Selection Points
Selection Points
WLH@
WLG@
WL@-2
WL@-2N
WLCA32-@
WL@-@LE
WL@-@LD
WL@-@LDK@
WL@-55
WL@-TH
WL@-TC
WL@-RP
WL@-P1
WLCA2-@S
WL01@-@S
WLGCA2-@S
WLMCA2@
WLMGCA2@
WLH2-@S
WLG2-@S
WLMH2@
WLMG2@
WL@-@LD-M1@
WL@-@LD-AGJ@/-DGJ@
WL@-@LD-DK1EJ@
Long-life
Selection Points
WLGCA2
Selection Points
Effective for welding sites or spattering
cutting powder.
With high mechanical durability of 30
million operations, effective for
high-frequency operation.
Effective for switching loads of 0.1 A, 125 VAC/30
VDC.
Effective for protecting the operating status.
Enable selection according to the
operating environment: water, oil,
chemicals, high/low temperatures, etc.
Effective for reducing wiring work,
making maintenance easier, and
preventing wiring mistakes.
·
·
For standard models, add -LE or -LD.
(Operation indicators cannot be used
with some environment-resistant
Provide twice the repeat accuracy as Basic Switches.
Effective for positioning in machine tools.
Effective if the
overallmovement is
80° or 90°when dog
angle ordeflection is
absorbed.
Selection Points
WL@-139
WL@-140
WL@-141
WL@-145
WL@-RP40
WL@-RP60
Effective for confirming workpieces
passing by on a conveyor or for
confirming operation in dark locations.
3
WL/WLM
Tables of Models
Heads (Roller levers only)
*1. One-side operation means that three operational directions can be selected electrically, according to the change in direction of the operating plunger. The operating
plunger is set for operation on both sides before delivery.
*2. Those models for which one-side operation is impossible can only operate on both sides.
*3. The WL-N high-sensitivity, high-precision models have been integrated into the WL Series. If you are scheduled to use the WL-N high-sensitivity, high-precision
models, refer to the model replacement table on page 42 and order high-sensitivity and high-precision models with the WL model numbers.
Connectors and Conduits
General-purpose Switches Spatter-prevention Switches Long-life Switches
Type
General
purpose Features Head specifications Spatter
prevention Long-life
Model Total travel (TT) One-side
operation Head
mounting Model Model
Basic WLC@
Possible *1
(Except for
long-life
models.)
Any of
4 directions WLCA2-@S WLMCA2@
General-
purpose
Overtravel WLH@Not possible
*2
Any of
4 directions WLH2-@SWLH2@
High-sensitivity
Overtravel *3WLG@Not possible
*2
Any of
4 directions WLG2-@SWLMG2@
Overtravel,
90° operation
WL@-2 Not possible
*2
Any of
4 directions ——
WL@-2N Possible *1Either of
2 directions
High-precision
*3WLGCA2 Possible *1Any of
4 directions WLGCA2-@SWLMGCA2@
Maintained *3 WLCA32-@—Any of
4 directions ——
Wiring type General-purpose Connector/conduit specifications Spatter-prevention Long-life
Model Model Model
Direct-wired connector WL@-@LDK@• SC-2F/-4F Connector built-in — WLM@-LDK@
Pre-wired connector WL@-@LD-M1@
WL@-@LD-@GJ@
WL@-@LD-DK1EJ@
• XS2H-series Pre-wired Connector built-
in
WL@-@S-M1@J-1
WL@-@S-DGJS03 WLM@-LD-M1J
WLM@-LD-@GJ@
Conduit (screw terminal)
WL@-@
WL@-@G1@
WL@-@G@
WL@-@Y@
WL@-@TS@
• G1/2 with no ground terminal
• G1/2 with ground terminal
• Pg13.5 with ground terminal
• M20 with ground terminal
• 1/2 14NPT with ground terminal
—
WLM@-LD
—
—
—
—
45°45°
• With a Roller Lever
80°80°
• Overtravel is large, making
setting the dog easier.
• Mounting is compatible with
WLH2.
80°80°
• Operation is highly sensitive
with only 10° pretravel.
• Overtravel is large, making
setting the dog easier.
• Mounting is compatible with
WLG2.
90°90°
• Overtravel is large, making
setting the dog easier.
• Mounting is compatible
with WLCA2-2.
45°45°
• Repeat accuracy is twice that
basic models.
•
Operation is highly sensitive
with only 5
°
pretravel.
• Ideal for positioning, e.g.,
90°
• When the dog throws the le-
ver, the output is reversed
and the reversed output is
held even after the dog
passed. The original status
is returned to only after the
dog passed.
WL/WLM
4
* Weather Resistance, Cold Resistance, and Heat Resistance
Silicon rubber is used to increase resistance to weather, cold, and heat. Silicon rubber, however, can generate silicon gas. (This can occur at room temperature, but
the amount of silicon gas generated increases at higher temperatures.) Silicon gas will react as a result of arc energy and form silicon oxide (SiO2). If silicon oxide
accumulates on the contacts, contact interference can occur and can interfere with the device. Before using a Switch, test it under actual application conditions
(including the environment and operating frequency) to confirm that no problems will occur in actual.
Environment-resistant Switches
Item Environment-resistant
Type Model Application Environment-resistant construction Applicable models
Airtight seal WL@-55
For uses in locations sub-
ject to cutting oil or water
Uses the W-10FB3-55 Airtight Built-in Switch.
Note: Use the SC Connector for the conduit opening.
All models except the low-
temperature and heat-re-
sistant models
Note: Models can be produced
using standard
actuators.
Hermetic seal
(Molded terminals/
Anti-coolant)
WL@-139
Refer to page 25 for information on the environ-
ment-resistant construction of Switches with Her-
metic Seals.
All models except the low-
temperature and heat-re-
sistant models
Note: Models can be produced
using standard
actuators. Only the
WLCA2, WLGCA2, or
WLH2 can be produced
for the WL@-141 and
WL@-145.
WL@-140
WL@-141
WL@-145
WL@-RP40
WL@-RP60
Low-temperature *WL@-TC
Can be used at a tempera-
ture of –40°C (operating
temperature range: –40 to
40°C), but cannot with-
stand icing.
• Uses a general-purpose built-in switch.
• Silicone rubber is used for rubber parts such as
the O-ring, gasket, etc.
All models except airtight
seal, hermetic seal, heat-
resistant, corrosion-proof,
and indicator-equipped
models
Heat-resistant *WL@-TH
Can be used in tempera-
tures of 120°C (operating
temperature range: 5 to
120°C).
• Uses a special built-in switch made from heat-
resistant resin.
• Silicone rubber is used for rubber parts such as
the O-ring, gasket etc.
All models except airtight
seal, hermetic seal, heat-
resistant, corrosion-proof,
and indicator-equipped, ny-
lon roller (WLCA2-26N),
seal roller models, and res-
in rod (WLNJ-2) models
Corrosion-proof WL@-RP For use in locations sub-
ject to corrosive gases and
chemicals.
• Diecast parts, such as the switch box, are made
of corrosion-proof aluminum.
• Rubber sealing parts are made of fluorine rubber
which aids in resisting oil, chemicals and
adverse weather conditions.
• Exposed nuts and screws (except the actuator
section) are made of stainless steel.
• Moving and rotary parts such as rollers are
made of sintered stainless steel or stainless
steel.
• The Head, box, and cover are yellow.
All models except overtrav-
el (90° operation), fork le-
ver lock (WLCA32-41 to -
43), low-temperature, heat-
resistant, and indicator-
equipped models
Weather-proof *WL@-P1 For use in parking lots and
other outdoor locations.
• Rubber parts are made from silicone rubber,
which has a high-tolerance to deterioration over
time and changes in temperature.
• Rollers are made of stainless steel to improve
corrosion resistance.
• Exposed nuts and screws are made of stainless
steel.
Only basic (WLCA2/CA12/
CL), general-purpose over-
travel (WLH2/H12/HL) and
high-sensitivity overtravel
(WLG2/G12/GL) models
(excluding heat-resistant
models).
5
WL/WLM
Selection Guide
With the WL Series, OMRON will combine the switch, Actuator, and wiring method required to build the ideal switch for
your application.
*1. Not all functions can be combined with environment-resistant switches. Refer to the applicable models on the previous page.
*2. Refer to page 25 for information on the construction of Hermetic Switches.
The WL Series consists of four basic types: General-purpose, En-
vironment-resistant, Spatter-prevention, and Long-life Switches.
WLCA2 Switches can be used for the most common applications.
Normal
High-temperature
Low-temperature
Outdoors
−10°C +80°C
+5°C+120°C
−40°C +40°C
Water-resistant to IP67.
Environment Key specifications Models
WL@General-purpose
Switches
WLM@Long-life Switches
WL@-TH Heat-resistant
Switches *1
WL@-TC Low-temperature
Switches *1
WL@-P1 Weather-proof
Switches *1
Water drops and mist
Uses an airtight built-in switch. WL@-55 Airtight Switches *1
WL@-RP Corrosion-proof
Switches *1
WL@-S Spatter-prevention
Switches
Chemicals and oil
WL@-139
Hermetic, Molded-terminal
Switches *1, *2
WL@-RP40
Hermetic, Molded-terminal
Switches *1, *2
WL@-140
Hermetic, Molded-terminal
Switches *1, *2
WL@-141, -145
Hermetic, Molded-terminal
Switches *1, *2
(Only the WLCA2, WLG2, WLGCA2,
and WLH2 can be produced.)
WL@-RP60
Hermetic, Molded-terminal
Switches *1, *2
According to Operating Environment
To increase heat resistance, the rubber material (silicon rubber)
and the material of the built-in switch have been changed.
Cables attached. Uses a general-purpose built-in switch.
The case cover and conduit opening are molded from epoxy
resin to increase the seal. The cover cannot be removed.
Cables attached. Uses an airtight built-in switch.
The cover screws, case cover, box interior, and conduit opening
are molded from epoxy resin to increase the seal.
(The cover cannot be removed.)
Cables attached. Uses an airtight built-in switch.
The cover screws, case cover, box interior, conduit opening, box
head, and head screws are molded from epoxy resin to increase
the seal. (The cover cannot be removed.)
The Head opening is protected from cutting powder.
-141: The Head section is molded from epoxy resin;
Head direction cannot be changed.
-145: The Head section is molded from epoxy resin;
Head can be in any of 4 directions.
Cables attached. Uses an airtight built-in switch.
The case cover and box interior are molded from epoxy resin to
increase the seal. The cover cannot be removed.
The SC connector can be removed, so it is possible to use
flexible conduits for the cable.
To prevent spatter during welding, a heat-resistant resin is used
for the indicator cover and screws and rollers are all made from
stainless steel.
Cables attached. Uses an airtight built-in switch.
The case cover, box interior, conduit opening, and head screws
are molded from epoxy resin to increase the seal. (The cover
cannot be removed.) Rubber parts are made from fluorine rubber
to increase resistance to coolant.
Rubber parts are made from silicone rubber, which has a
high-tolerance to deterioration over time and changes in temperature.
Rollers are made of stainless steel to improve corrosion resistance.
Exposed nuts and screws are made of stainless steel.
Corrosion-proof aluminum diecast has been used for the
housing, fluorine rubber has been used for rubber parts, and
stainless steel has been used for screws and nuts (except for
actuator) to increase resistance to oils, chemicals, and weather.
To increase resistance to cold, silicon rubber and other
measures are used.
Ambient operating temperature
Constant water
drops and mist
Coolant
Spattering from
welding
Constant water
drops or splattering
cutting powder
Operating environment
WL/WLM
6
Conditions Key specifications Models
According to Application Conditions
Switching standard
loads
Switching
microloads
Normal durability
Long-life
0.1 A at 125 VAC, resistive load
0.1 A at 30 VDC, resistive load
10 A at 125,250, or 500 VAC
0.8 A at 125 VDC
0.4 A at 250 VDC
WL@ General-purpose Switches
WL@-S Spatter-prevention Switches
WLM@ Long-life Switches
WL01@ General-purpose Microload Switches
WL01@-S Spatter-prevention Microload Switches
WL@ General-purpose Switches
WL@-S Spatter-prevention Switches
WLM@ Long-life Switches
Mechanical: 15 million operation min.
(10 million operation min. for overtravel
general-purpose or high-sensitivity models or
flexible rod models)
Mechanical: 30 million operation min.
Durability Load
According to Ease of Installation and Maintenance
Connector
attachment in
control and relay
boxes
One-touch
connector
attachment
Screw tightening
and installation
Daily inspections
and maintenance
checks
Switching light-ON between operating/not
operating. (Switching not possible for models
with molded terminals.)
LED
10 to 115 VAC/DC
Switching light-ON between operating/not
operating. (Switching not possible for models
with molded terminals.)
Neon lamp
125 to 250 VAC
Pre-wired connector, 4-conductor.
Greatly reduces wiring work.
Water-proof to IP67.
Direct-wired connector, 4-conductor.
Greatly reduces wiring work.
Water-proof to IP67.
Pre-wired connector, 2-conductor.
Greatly reduces wiring work.
Water-proof to IP67.
Direct-wired connector, 2-conductor.
Greatly reduces wiring work.
Water-proof to IP67.
Screw terminals. No ground terminal.
Conduit size: G1/2
Screw terminals. Ground terminal.
Conduit size: 4 sizes
WL@-@LD-@GJO3
General-purpose, Pre-wired Connector Switches
WL@-@S-@GJSO3
Spatter-prevention, Pre-wired Connector Switches
WLM@-LD-@GJO3
Long-life, Pre-wired Connector Switches
WL@-@LD-M1J
General-purpose, Pre-wired Connector Switches
WL@-@S-M1J-1
Spatter-prevention, Pre-wired Connector Switches
WLM@-LD-M1J
Long-life, Pre-wired Connector Switches
WL@-@LDK13
General-purpose, Direct-wired Connector Switches
WLM@-LDK13
Long-life, Direct-wired Connector Switches
WL@-@LDK43
General-purpose, Direct-wired Connector Switches
WLM@-LDK43
Long-life, Direct-wired Connector Switches
WL@ General-purpose Switches
WL@ General-purpose Switches
WLM@ Long-life Switches
WL@-LD
General-purpose, Indicator-equipped (LED) Switches
WL@-LDS
Spatter-prevention, Indicator-equipped (LED) Switches
WL@-LE
General-purpose, Indicator-equipped (Neon Lamp) Switches
WL@-LES
Spatter-prevention, Indicator-equipped (Neon Lamp) Switches
Conditions Key specifications Models
Wiring specification Operation indicator
7
WL/WLM
R38
R50
R63
R25 to 89
25 to 140
350 to 380
427.5
45°15°
15°
10°
45°
WLCA2-2 WLCA2-2N
According to Form of Operation
TT (total travel) PT (pretravel)
Detection object Key specifications Models
Adjustable between
dog and lever
Cams or
workpieces with
vertical movement
Round-trip
operation of
passing dogs
Dogs or workpieces
with large
deflection
Dogs and
workpieces
(Mounts in any of
4 directions)
Passing dogs,
high sensitivity
General
Passing dogs
Passing dogs
High precision
● Short lever
● One-Horizontal operation possible.
(WLCA@ only)
● Head mounts in any of 4 directions.
● Medium lever
● One-Horizontal operation possible.
(WLCA@ only)
● Head mounts in any of 4 directions.
● Long lever
● One-Horizontal operation possible.
(WLCA@ only)
● Head mounts in any of 4 directions.
● Available in sealed models.
(WLD28@)
● Head mounts in any of 4 directions.
● Head mounts in any of 4 directions.
● Head mounts in any of 4 directions.
● Head mounts in any of 4 directions.
● Head mounts in any of 4 directions.
● Head mounts in any of 4 directions.
● One-Horizontal operation not
possible.
● Head mounts in any of 4 directions.
● One-Horizontal operation not
possible.
● Head mounts in any of 4 directions.
● One-Horizontal operation possible.
(WLCL only)
● Head mounts in any of 4 directions.
● One-Horizontal operation possible.
(WLCA@ only)
● Head mounts in any of 4 directions.
WLGCA2 General-purpose Switches
WLGCA2-@S Spatter-prevention Switches
WLMGCA2 Long-life Switches
WLCA2-2 General-purpose Switches
WLCA2-2N General-purpose Switches
WLG2 General-purpose Switches
WLG2-@S Spatter-prevention Switches
WLMG2 Long-life Switches
WLH2 General-purpose Switches
WLH2-@S Spatter-prevention Switches
WLMH2 Long-life Switches
WLCA2 General-purpose Switches
WLCA2-@S Spatter-prevention Switches
WLMCA2 Long-life Switches
WLSD2 Horizontal-roller Plunger Actuator
WLD2 Top-roller Plunger Actuator
WLD28 Sealed
Top-roller Plunger Actuator
WLSD3 Horizontal-ball Plunger Actuator
WLSD Horizontal Plunger Actuator
WLD Top Plunger Actuator
WLD3 Top-ball Plunger Actuator
WLCA32-44 Fork Lever Lock Actuator
WLCA32-43 Fork Lever Lock Actuator
WLCA32-42 Fork Lever Lock Actuator
WLCA32-41 Fork Lever Lock Actuator
WLHAL5 Rod Spring Lever Actuator
WLHAL4 Adjustable Rod Lever Actuator
WL@L Adjustable Rod Lever Actuators
WL@12 Adjustable Roller Lever Actuators
WL@2-8 Roller
Lever Actuators
WL@2-7 Roller Lever Actuators
WL@2 Roller Lever Actuators
WL@2-@S Roller Lever Actuators
WLM@2 Roller Lever Actuators
Actuators Operation angles
80°80°
80°
90°90°20°
25°
45°45°5°
80°
WL/WLM
8
Application Examples
Positioning on Production Lines
High-precision Positioning of Machine Tools
Positioning on Suspended Conveyors
Pallet Detection in Arc Welding Lines
Multilevel Car Parking Towers
Limit Detection is Transport Systems
9
WL/WLM
Model Number Structure
Model Number Legend (Not all combinations are possible. Ask your OMRON representative for details.)
WL @@-@@@@@@@@
(1) (2) (3) (4) (5) (6) (7) (8) (9)(10)
(6) Hermetic Model Specifications
* Refer to page 4 for applicable models.
(8) Indicator Type
Note: Dimensions are the same for both LE and LD models.
(9) Indicator Wiring
Note: Include the indicator wiring specification only when a (6) hermetic seal
and (8) operation indicator have been selected.
(10) Lever Type
General-purpose and Environment-resistant Switches
(1) Electrical Rating
Note: Dimensions are the same as the standard
models.
(3) Environment-resistant Model
Specifications
Note: Dimensions are the same as the standard
models.
*1. Refer to page 4 for applicable models.
(4) Built-in Switch Type
Note: Dimensions are the same as the standard
models.
*1. Refer to page 4 for applicable models.
(5) Temperature Specifications
Note: Dimensions are the same as the standard
models.
*1. Refer to page 4 for applicable models.
(7) Conduit Size, Ground Terminal
Specifications *2
Note: Dimensions are the same as the standard
models.
*2. Models with ground terminals are approved by
EN/IEC (CE marking).
Blank Standard load
01 Microload
Blank Standard
RP Corrosion-proof *1
P1 Weather-proof *1
Blank Standard
55 Hermetically sealed *1
Blank Standard: –10°C to +80°C
TH Heat-resistant: +5°C to +120°C *1
TC
Low-temperature: –40
°
C to +40
°
C *1
Blank G1/2 without ground terminal
G1 G1/2 with ground terminal
GPg13.5 with ground terminal
YM20 with ground terminal
TS 1/2-14NPT with ground terminal
(2) Actuator and Head Specifications
Symbol Actuator type
Switch without lever
CA2 Roller lever: Standard model R38 WLRCA2
CA2-7 Roller lever: Standard model R50 WLRCA2
CA2-8 Roller lever: Standard model R63 WLRCA2
H2 Roller lever: General-purpose overtravel model, 80°WLRH2
G2 Roller lever: High-sensitivity overtravel, 80°WLRG2
CA2-2 Roller lever: Overtravel, 90°WLRCA2-2
CA2-2N Roller lever: Overtravel, 90°WLRCA2-2N
GCA2 Roller lever: High-precision R38 WLRGCA2
CA12 Adjustable roller lever: Standard WLRCA2
H12 Adjustable roller lever: General-purpose overtravel model, 80°WLRH2
G12 Adjustable roller lever: High-sensitivity overtravel, 80°WLRG2
CA12-2 Adjustable roller lever: Overtravel, 90°WLRCA2-2
CA12-2N Adjustable roller lever: Overtravel, 90°WLRCA2-2N
CL Adjustable rod lever: Standard, 25 to 140 mm WLRCL
HL
Adjustable rod lever: General-purpose overtravel model, 80
°
, 25 to 140 mm
WLRH2
HAL4
Adjustable rod lever: General-purpose overtravel model, 80
°
, 350 to 380 mm
WLRH2
GL
Adjustable rod lever: High-sensitivity overtravel, 80
°
, 25 to 140 mm
WLRG2
CL-2 Adjustable rod lever: Overtravel, 90°, 25 to 140 mm WLRCA2-2
CL-2N Adjustable rod lever: Overtravel, 90°, 25 to 140 mm WLRCA2-2N
HAL5 Rod spring lever: General-purpose overtravel model, 80°WLRH2
CA32-41 Fork lever lock: Maintained, WL-5A100 WLRCA32
CA32-42 Fork lever lock: Maintained, WL-5A102 WLRCA32
CA32-43 Fork lever lock: Maintained, WL-5A104 WLRCA32
DPlunger: Top plunger —
D2 Plunger: Top-roller plunger —
D28 Plunger: Sealed top-roller plunger —
D3 Plunger: Top-ball plunger —
SD Plunger: Horizontal plunger —
SD2 Plunger: Horizontal-roller plunger —
SD3 Plunger: Horizontal-ball plunger —
NJ Flexible rod: Coil spring —
NJ-30 Flexible rod: Coil spring, multi-wire —
NJ-2 Flexible rod: Coil spring, resin rod —
NJ-S2 Flexible rod: Steel wire —
Blank
No cables or molding
139
General-purpose built-in switch with cables attached and mold-
ed conduit opening and cover (cover cannot be removed). *
140
Airtight built-in switch with cables attached and molded conduit open-
ing, cover, and box interior cover screws (cover cannot be removed). *
141
Airtight built-in switch with cables attached and molded con-
duit opening, cover, head, box interior, cover screws, and
head screws (cover cannot be removed, Head direction can-
not be changed). The Head opening is created to protect it
from cutting powder. *
145
Airtight built-in switch with cables attached and molded conduit
opening, cover, box interior, and cover screws (cover cannot be
removed, Head can be mounted in any of 4 directions). The
Head opening is created to protect it from cutting powder. *
RP40
Airtight built-in switch with cables attached and molded cover and
box interior (cover cannot be removed, Head direction can be
changed). SC Connector can be removed, so it is possible to use
flexible conduits for the cable. *
RP60
Airtight built-in switch with cables attached, fluorine rubber used,
and molded conduit opening, cover, and box interior (cover cannot
be removed, Head direction cannot be changed). *
Symbol Element Voltage Leakage current
Blank No indicator
LE Neon lamp 125 to 250 VAC Approx. 0.6 to 1.9 mA
LD LED 115 VAC/VDC Approx. 0.5 mA
10 to 24 VAC/VDC Approx. 0.4 mA
2NC connection: Light-ON when operating
3NO connection: Light-ON when not operating
Blank Standard lever
ADouble nut lever
WL/WLM
10
WL @@-@@S@
(1) (2) (3) (4) (5)
(1) Electrical Rating
Note: Dimensions are the same as the standard models.
(2) Actuator Type
(3) Built-in Switch Type
Note: Dimensions are the same as the standard models.
(4) Indicator Type
Note: Dimensions are the same for both LE and LD models.
(5) Wiring Specifications
*1. Models with pre-wired connectors and DC specifications are approved by
EN/IEC (CE marking) except for LE Models (Neon Lamp Models).
*2. With 0.3-m cable attached.
WLM@-LD @
(1) (2) (3)
(1) Actuator
(2) Indicator Type
(3) Wiring Specifications
* With 0.3-m cable attached.
Direct-wired Connector Pre-wired Connector
WL @@-@LD @
(1) (2) (3) (4) (5)
General-purpose Switches
Sensor I/O Connector Switches
(1) Electrical Rating
Note: Dimensions are the same as the standard models.
(2) Actuator Type
(3) Built-in Switch Type
Note: Dimensions are the same as the standard models.
Blank Standard load
01 Microload
CA2 Roller lever: Standard model
GCA2 Roller lever: High-precision model
H2 Roller lever: General-purpose
overtravel model
G2 Roller-lever: High-sensitivity over-
travel model
D2 Top-roller plunger
D28
Sealed top-roller plunger
Blank Standard
55 Hermetically sealed
(4) Indicator Type
(5) Wiring Specifications
*1. Models with pre-wired connectors and DC specifications have EN/IEC approval (CE marking).
*2. With 0.3-m cable attached.
LD LED, 10 to 115 VAC/DC
K13A
Direct-wired Connector (2-conductor: AC, NO wiring, connector pins No. 3, 4)
K13
Direct-wired Connector (2-conductor: DC, NO wiring, connector pins No. 3, 4)
K43A Direct-wired Connector (4-conductor: AC)
K43 Direct-wired Connector (4-conductor: DC)
-M1J *
Pre-wired Connector *2 (2-conductor: DC, NO wiring, connector pins No. 3, 4)
-M1GJ *1
Pre-wired Connector *2 (2-conductor: DC, NO wiring, connector pins No. 1, 4)
-M1JB
Pre-wired Connector *2 (2-conductor: DC, NC wiring, connector pins No. 3, 2)
-AGJ03 Pre-wired Connector *2 (4-conductor, AC)
-DGJ03 *1Pre-wired Connector *2 (4-conductor, DC)
-DK1EJ03 *1
Pre-wired Connector *2 (3-conductor: DC, NO wiring, connector pins No. 2, 3, 4)
Spatter-prevention Switches
Blank Standard load
01 Microload
CA2 Roller lever: Standard model
GCA2 Roller lever: High-precision model
H2 Roller lever: General-purpose Overtravel model
G2 Roller lever: High-sensitivity Overtravel model
D28 Sealed top-roller plunger
Blank Standard
55 Hermetically sealed
LD LED, AC/DC
LE Neon lamp
Blank Screw terminal: G1/2 conduit
-M1J-1 *1Pre-wired Connector *2
(2-conductor: DC, NO wiring, connector pins No. 3, 4)
-M1GJ-1 *1Pre-wired Connector *2
(2-conductor: DC, NO wiring, connector pins No. 1, 4)
-DGJS03 *1Pre-wired Connector *2 (4-conductor: DC)
Long-life Switches
CA2 Roller lever: Standard model
GCA2 Roller lever: High-precision model
H2 Roller lever: General-purpose overtravel model
G2 Roller lever: High-sensitivity overtravel model
LD LED, 10 to 115 VAC/DC
Blank Screw terminal: G1/2 conduit
K13A Direct-wired Connector: 2-conductor, AC
K13 Direct-wired Connector: 2-conductor, DC
K43A Direct-wired Connector: 4-conductor, AC
K43 Direct-wired Connector: 4-conductor, DC
-M1J Pre-wired Connector: 2-conductor, DC *
-AGJ03 Pre-wired Connector: 4-conductor, AC *
-DGJ03 Pre-wired Connector: 4-conductor, DC *
11
WL/WLM
Ordering Information
Lever
Plunger
Flexible Rod
General-purpose Switches
Actuator Roller lever R38 Roller lever R50 Roller lever R63
Item Model Model Model
Basic Standard load WLCA2 WLCA2-7 WLCA2-8
Microload WL01CA2
WL01CA2-7 WL01CA2-8
Overtravel
General-
purpose
Standard load WLH2 — —
Microload WL01H2 — —
High-
sensitivity
Standard load WLG2 — —
Microload WL01G2 — —
90°
operation
Standard load WLCA2-2 — —
Microload WL01CA2-2 — —
Standard load WLCA2-2N — —
Microload
WL01CA2-2N
——
High-precision Standard load WLGCA2 — —
Microload WL01GCA2 — —
Actuator Adjustable roller
lever
Adjustable rod lever
25 to 140mm
Adjustable rod lever
350 to 380mm Rod spring lever
Item Model Model Model Model
Basic Standard load WLCA12 WLCL ——
Microload WL01CA12 WL01CL ——
Overtravel
General-
purpose
Standard load WLH12 WLHL WLHAL4 WLHAL5
Microload WL01H12 WL01HL ——
High-
sensitivity
Standard load WLG12 WLGL ——
Microload WL01G12 WL01GL ——
90°
operation
Standard load WLCA12-2 WLCL-2 ——
Microload
W
L01CA12-2
———
Standard load
WLCA12-2N
WLCL-2N ——
Microload
WL01CA12-2N
WL01CL-2N
——
Actuator
Fork lever lock (with
WL-5A100 plastic
roller lever)
Fork lever lock (with
WL-5A102 plastic
roller lever)
Fork lever lock (with
WL-5A104 plastic
roller lever)
Fork lever lock (with
WL-5A104 plastic
roller lever)
Item Model Model Model Model
Maintained Standard load WLCA32-41 WLCA32-42 WLCA32-43 WLCA32-44
Microload
WL01CA32-41
—
WL01CA32-43 WL01CA32-44
Actuator Top plunger Top-roller plunger
Top-ball plunger
Sealed top-roller
plunger
Item Model Model Model Model
Top plunger Standard load WLD WLD2 WLD3 WLD28
Microload WL01D WL01D2 WL01D3 WL01D28
Actuator
Horizontal plunger
Horizontal-roller
plunger Horizontal-ball
plunger
Item Model Model Model
Side plunger Standard load WLSD WLSD2 WLSD3
Microload WL01SD WL01SD2 WL01SD3
Actuator Coil spring (spring
diameter: 6.5) Coil spring (spring
diameter: 4.8)
Coil spring
(resin rod
diameter: 8)
Steel wire (wire
diameter: 1)
Item Model Model Model Model
Flexible rod Standard load WLNJ WLNJ-30 WLNJ-2 WLNJ-S2
Microload WL01NJ WL01NJ-30 WL01NJ-2 WL01NJ-S2
Note: Models are also available with ground terminals.
Standard Switches
WL/WLM
12
Lever
Plunger
Flexible Rod
General-purpose Switches
Actuator Roller lever R38 Roller lever R50 Roller lever R63 Adjustable roller
lever
Item Model Model Model Model
Basic Neon lamp WLCA2-LE WLCA2-7LE WLCA2-8LE WLCA12-LE
LED WLCA2-LD WLCA2-7LD WLCA2-8LD WLCA12-LD
Overtravel
General-
purpose
Neon lamp WLH2-LE ——WLH12-LE
LED WLH2-LD ——WLH12-LD
High-
sensitivity
Neon lamp WLG2-LE ——WLG12-LE
LED WLG2-LD ——WLG12-LD
90°
operation
Neon lamp WLCA2-2LE ——WLCA12-2LE
LED WLCA2-2LD ——WLCA12-2LD
Neon lamp WLCA2-2NLE ——
WLCA12-2NLE
LED WLCA2-2NLD ——
WLCA12-2NLD
High-precision Neon lamp WLGCA2-LE ———
LED WLGCA2-LD ———
Actuator
Adjustable rod lever
25 to 140 mm
Adjustable rod lever
350 to 380 mm Rod spring lever
Item Model Model Model
Basic Neon lamp WLCL-LE ——
LED WLCL-LD ——
Overtravel
General-
purpose
Neon lamp WLHL-LE WLHAL4-LE WLHAL5-LE
LED WLHL-LD WLHAL4-LD WLHAL5-LD
High-
sensitivity
Neon lamp WLGL-LE ——
LED WLGL-LD ——
90°
operation
Neon lamp WLCL-2LE ——
LED WLCL-2LD ——
Neon lamp WLCL-2NLE ——
LED WLCL-2NLD ——
Actuator
Fork lever lock (with
WL-5A100 Plastic
Roller Lever)
Fork lever lock (with
WL-5A102 Plastic
Roller Lever)
Fork lever lock (with
WL-5A104 Plastic
Roller Lever)
Item Model Model Model
Maintained Neon lamp
WLCA32-41LE WLCA32-42LE WLCA32-43LE
LED
WLCA32-41LD
—
WLCA32-43LD
Actuator Top plunger Top-roller plunger Top-ball plunger Sealed top-roller
plunger
Item Model Model Model Model
Top plunger Neon lamp WLD-LE
WLD2-LE
WLD3-LE WLD28-LE
LED WLD-LD
WLD2-LD
WLD3-LD WLD28-LD
Actuator
Horizontal plunger
Horizontal-roller
plunger Horizontal-ball
plunger
Item Model Model Model
Side plunger Neon lamp WLSD-LE WLSD2-LE WLSD3-LE
LED WLSD-LD WLSD2-LD WLSD3-LD
Actuator
Coil spring (spring
diameter: 6.5) Coil spring (spring
diameter: 4.8)
Coil spring
(resin rod
diameter: 8)
Steel wire (wire
diameter: 1)
Item Model Model Model Model
Flexible rod Neon lamp WLNJ-LE WLNJ-30LE WLNJ-2LE WLNJ-S2LE
LED WLNJ-LD WLNJ-30LD WLNJ-2LD WLNJ-S2LD
Indicator-equipped Switches
13
WL/WLM
Direct-wired Connectors
Pre-wired Connectors
General-purpose Switches
Actuator
Item Basic Overtravel High-precision
General-purpose High-sensitivity
Wiring
Built-in switch
specification
Model Model Model Model
Roller lever
2-con-
ductor
DC
NO
connector
pins
No. 3, 4
Standard
WLCA2-LDK13 WLH2-LDK13 WLG2-LDK13 WLGCA2-LDK13
Airtight seal
WLCA2-55LDK13 WLH2-55LDK13 WLG2-55LDK13
WLGCA2-55LDK13
4-con-
ductor
DC
Standard
WLCA2-LDK43 WLH2-LDK43 WLG2-LDK43 WLGCA2-LDK43
Airtight seal
WLCA2-55LDK43 WLH2-55LDK43 WLG2-55LDK43
WLGCA2-55LDK43
Top-roller
plunger
2-con-
ductor
DC
NO
connector
pins
No. 3, 4
Standard
WLD2-LDK13 ———
Airtight seal
WLD2-55LDK13 ———
4-con-
ductor
DC
Standard
WLD2-LDK43 ———
Airtight seal
WLD2-55LDK43 ———
Actuator
Item Basic Overtravel High-precision
General-purpose High-sensitivity
Wiring
Built-in switch
specification
Model Model Model Model
Roller lever
2-con-
ductor
DC
NO
connector
pins
No. 3, 4
Standard
WLCA2-LD-M1J WLH2-LD-M1J WLG2-LD-M1J WLGCA2-LD-M1J
Airtight seal
WLCA2-55LD-M1J ——
WLGCA2-55LD-M1J
connector
pins
No. 1, 4
Standard
WLCA2-LD-M1GJ WLH2-LD-M1GJ WLG2-LD-M1GJ
WLGCA2-LD-M1GJ
Airtight seal
WLCA2-55LD-M1GJ
—WLG2-55LD-M1GJ —
NC
connector
pins
No. 3, 2
Standard
——WLG2-LD-M1JB —
Airtight seal
WLCA2-55LD-M1JB
—WLG2-55LD-M1JB
WLGCA2-55LD-M1JB
4-con-
ductor
DC
Standard
WLCA2-LD-DGJ03 WLH2-LD-DGJ03 WLG2-LD-DGJ03 —
Airtight seal
WLCA2-55LD-DGJ03
—
WLG2-55LD-DGJ03
WLGCA2-55LD-DGJ03
3-con-
ductor
DC
connector
pins
No. 2, 3, 4
Standard
WLCA2-LD-DK1EJ03
—
WLG2-LD-DK1EJ03
—
Airtight seal WLCA2-55LD-DK1EJ03
—
WLG2-55LD-DK1EJ03
—
Top-roller
plunger
2-con-
ductor
DC
NO
connector
pins
No. 3, 4
Standard
WLD2-LD-M1J ———
Airtight seal
WLD2-55LD-M1J ———
connector
pins
No. 1, 4
Standard
WLD2-LD-M1GJ ———
Airtight seal
WLD2-55LD-M1GJ ———
NC
connector
pins
No. 3, 2
Standard
————
Airtight seal
WLD2-55LD-M1JB ———
4-con-
ductor
DC
Standard
WLD2-LD-DGJ03 ———
Airtight seal
————
3-con-
ductor
DC
connector
pins
No. 2, 3, 4
Standard
WLD2-LD-DK1EJ03
———
Airtight seal
WLD2-55LD-DK1EJ03
———
Sensor I/O Connector Switches
WL/WLM
14
Environment-resistant Switches Note: Models are also available with ground terminals.
Actuator Roller lever R38
Item
Basic Overtravel
General-purpose High-sensitivity
Model Model Model
Airtight seal
No indicator WLCA2-55 WLH2-55 WLG2-55
Indicator LED WLCA2-55LD WLH2-55LD WLG2-55LD
Neon WLCA2-55LE WLH2-55LE WLG2-55LE
Hermetic
seal
Molded
terminals
-139
No indicator WLCA2-139 WLH2-139 WLG2-139
Indicator NC wiring WLCA2-139LD2 ——
NO wiring WLCA2-139LD3 —WLG2-139LD3
-140
No indicator WLCA2-140 WLH2-140 WLG2-140
Indicator NC wiring WLCA2-140LD2 —WLG2-140LD2
NO wiring WLCA2-140LD3 —WLG2-140LD3
-141
No indicator WLCA2-141 WLH2-141 WLG2-141
Indicator NC wiring WLCA2-141LD2 —WLG2-141LD2
NO wiring WLCA2-141LD3 WLH2-141LD3 WLG2-141LD3
Anti-coolant
No indicator WLCA2-RP60 WLH2-RP60 WLG2-RP60
Indicator NC wiring WLCA2-RP60LD2 —WLG2-RP60LD2
NO wiring WLCA2-RP60LD3 WLH2-RP60LD3 WLG2-RP60LD3
Heat-resistant
No indicator
WLCA2-TH WLH2-TH WLG2-TH
Low-temperature WLCA2-TC WLH2-TC WLG2-TC
Corrosion-proof WLCA2-RP WLH2-RP WLG2-RP
Weather-proof WLCA2-P1 WLH2-P1 WLG2-P1
Actuator Roller lever R38
Item
Overtravel High-precision
90° (-2 model) 90° (-2N model)
Model Model Model
Airtight seal
No indicator WLCA2-255 WLCA2-2N55 WLGCA2-55
Indicator LED WLCA2-255LD WLCA2-2N55LD WLGCA2-55LD
Neon WLCA2-255LE WLCA2-2N55LE WLGCA2-55LE
Hermetic
seal
Molded
terminals
-139
No indicator WLCA2-2139 WLCA2-2N139 WLGCA2-139
Indicator NC wiring WLCA2-2139LD2 —WLGCA2-139LD2
NO wiring WLCA2-2139LD3 —WLGCA2-139LD3
-140
No indicator —WLCA2-2N140 WLGCA2-140
Indicator NC wiring ——WLGCA2-140LD2
NO wiring ——WLGCA2-140LD3
-141
No indicator ——WLGCA2-141
Indicator NC wiring ———
NO wiring ——WLGCA2-141LD3
Anti-coolant
No indicator WLCA2-2RP60 —WLGCA2-RP60
Indicator NC wiring WLCA2-2RP60LD2 —WLGCA2-RP60LD2
NO wiring WLCA2-2RP60LD3 —WLGCA2-RP60LD3
Heat-resistant
No indicator
WLCA2-2TH WLCA2-2NTH WLGCA2-TH
Low-temperature WLCA2-2TC WLCA2-2NTC WLGCA2-TC
Corrosion-proof ——WLGCA2-RP
15
WL/WLM
Actuator Adjustable roller lever
Item
Basic Overtravel
General-purpose High-sensitivity
Model Model Model
Airtight seal
No indicator WLCA12-55 ——
Indicator LED WLCA12-55LD ——
Neon WLCA12-55LE ——
Hermetic
seal
Molded
terminals
-139
No indicator
WLCA12-139 ——
-140 WLCA12-140 ——
-141 WLCA12-141 ——
Anti-coolant WLCA12-RP60 ——
Heat-resistant
No indicator
WLCA12-TH WLH12-TH WLG12-TH
Low-temperature WLCA12-TC WLH12-TC WLG12-TC
Corrosion-proof WLCA12-RP WLH12-RP WLG12-RP
Weather-proof WLCA12-P1 WLH12-P1 WLG12-P1
Actuator Adjustable roller lever
Item
Overtravel
90° (-2 model) 90° (-2N model)
Model Model
Heat-resistant No indicator WLCA12-2TH WLCA12-2NTH
Low-temperature WLCA12-2TC WLCA12-2NTC
Actuator Adjustable rod lever 25 to 140 mm
Item
Basic Overtravel
General-purpose High-sensitivity
Model Model Model
Airtight seal
No indicator WLCL-55 ——
Indicator LED WLCL-55LD ——
Neon ———
Hermetic
seal
Molded
terminals
-139
No indicator
WLCL-139 ——
-140 WLCL-140 ——
-141 ———
Anti-coolant WLCL-RP60 ——
Heat-resistant
No indicator
WLCL-TH WLHL-TH WLGL-TH
Low-temperature WLCL-TC WLHL-TC WLGL-TC
Corrosion-proof WLCL-RP WLHL-RP WLGL-RP
Weather-proof WLCL-P1 WLHL-P1 WLGL-P1
Actuator Adjustable rod lever 25 to 140 mm
Item
Overtravel
90° (-2 model) 90° (-2N model)
Model Model
Heat-resistant
No indicator
WLCL-2TH WLCL-2NTH
Low-temperature WLCL-2TC WLCL-2NTC
Corrosion-proof WLCL-2RP —
WL/WLM
16
Note: The standard cable length for models with airtight seals is 5 m.
Note: The standard cable length for models with airtight seals is 5 m.
Actuator Top-roller plunger
Sealed top-roller plunger
Horizontal plunger
Item Model Model Model
Airtight seal
No indicator WLD2-55 WLD28-55 WLSD-55
Indicator LED WLD2-55LD WLD28-55LD WLSD-55LD
Neon WLD2-55LE WLD28-55LE —
Hermetic
seal
Molded
terminals
-139
No indicator
WLD2-139 WLD28-139 WLSD-139
-140 —WLD28-140 —
Anti-coolant WLD2-RP60 WLD28-RP60 WLSD-RP60
Heat-resistant
No indicator
WLD2-TH WLD28-TH WLSD-TH
Low-temperature WLD2-TC —WLSD-TC
Corrosion-proof WLD2-RP WLD28-RP WLSD-RP
Actuator Horizontal-roller
plunger Coil spring (spring
diameter: 6.5) Coil spring (resin rod
diameter: 8)
Item Model Model Model
Airtight seal
No indicator WLSD2-55 WLNJ-55 WLNJ-255
Indicator LED WLSD2-55LD WLNJ-55LD WLNJ-255LD
Neon ———
Hermetic
seal
Molded
terminals
-139
No indicator
WLSD2-139 WLNJ-139 —
-140 WLSD2-140 WLNJ-140 WLNJ-2140
Anti-coolant WLSD2-RP60 WLNJ-RP60 WLNJ-2RP60
Heat-resistant
No indicator
WLSD2-TH WLNJ-TH —
Low-temperature WLSD2-TC WLNJ-TC WLNJ-2TC
Corrosion-proof WLSD2-RP WLNJ-RP WLNJ-2RP
17
WL/WLM
Note: Ask your OMRON representative about WL01@-@S Microload Switches.
*1. The default setting is “light-ON when not operating.”
Turn the lamp holder by 180° to change the setting to “light-ON when operating”. (Ask your OMRON representative about 2-conductor models.)
*2. With 0.3-m cable attached.
Connecting Cables
Spatter-prevention Switches
Actuator
Roller lever
Sealed top-roller plunger
Item
Double nut lever Allen-head lever
Model Model Model
Neon lamp
operation
indicator
Basic WLCA2-LEAS WLCA2-LES WLD28-LES
Overtravel
General-purpose
WLH2-LEAS WLH2-LES —
High-sensitivity
WLG2-LEAS WLG2-LES —
High-precision —WLGCA2-LES —
LED
operation
indicator
Basic WLCA2-LDAS WLCA2-LDS WLD28-LDS
Overtravel
General-purpose
WLH2-LDAS WLH2-LDS —
High-sensitivity
WLG2-LDAS WLG2-LDS —
High-precision —WLGCA2-LDS —
Long-life Switches
Item LED operation indicator *1
Basic Overtravel High-precision
General-purpose High-sensitivity
Actuator Model Model Model Model
WLMCA2-LD WLMH2-LD WLMG2-LD WLMGCA2-LD
2-conductor
AC WLMCA2-LDK13A WLMH2-LDK13A WLMG2-LDK13A WLMGCA2-LDK13A
DC WLMCA2-LDK13 WLMH2-LDK13 WLMG2-LDK13 WLMGCA2-LDK13
4-conductor
AC WLMCA2-LDK43A WLMH2-LDK43A WLMG2-LDK43A WLMGCA2-LDK43A
DC WLMCA2-LDK43 WLMH2-LDK43 WLMG2-LDK43 WLMGCA2-LDK43
2-conductor
DC WLMCA2-LD-M1J WLMH2-LD-M1J WLMG2-LD-M1J WLMGCA2-LD-M1J
4-conductor
DC WLMCA2-LD-DGJ03 WLMH2-LD-DGJ03 WLMG2-LD-DGJ03 —
Voltage specification Number of conductors Cable length Model
AC
22 m XS2F-A421-DB0-F
5 m XS2F-A421-GB0-F
42 m XS2F-A421-D90-F
5 m XS2F-A421-G90-F
DC
22 m XS2F-D421-DD0
5 m XS2F-D421-GD0
42 m XS2F-D421-D80-F
5 m XS2F-D421-G80-F
Roller lever, screw
terminal
Roller lever,
direct-wired
connector
Roller lever,
pre-wired
connector *2
Straight Cable
18
WL/WLM
Individual Parts
Heads
* The model number of Heads without levers are same as those of Heads with levers without the numbers at the end.
Example: WL-1H1100 becomes WL-1H without the lever.
However, the WLH2 and WLH12 become WL-2H-1 and the WLGCA2 becomes WL-1H-1 for the Heads without levers.
Other Heads are also available. Ask your OMRON representative.
Switches without levers
Covers with Operation Indicators
Note: The default setting is "light-ON when not operating."
Turn the lamp holder by 180° to change the setting to "light-ON when operating."
Actuator type Set model Head model (with Actuator)
Roller lever
WLCA2 WL-1H1100
WLG2 WL-2H1100
WLH2 WL-2H1100-1 *
WLCA2-2 WL-3H1100
WLCA2-2N WL-6H1100
Adjustable
roller lever
WLCA12 WL-1H2100
WLG12 WL-2H2100
WLH12 WL-2H2100-1 *
WLCA12-2 WL-3H2100
WLCA12-2N WL-6H2100
Adjustable
rod lever
WLCL WL-4H4100
WLGL WL-2H4100
WLCL-2 WL-3H4100
WLCL-2N WL-6H4100
Actuator type Set model Head model (with Actuator)
Top plunger
WLD WL-7H100
WLD2 WL-7H200
WLD3 WL-7H300
WLD28 WL-7H400
Horizontal
plunger
WLSD WL-8H100
WLSD2 WL-8H200
WLSD3 WL-8H300
Fork lever
lock
WLCA32-41 WL-5H5100
WLCA32-42 WL-5H5102
WLCA32-43 WL-5H5104
WLCA32-44 WL-5H5104
Coil spring
WLNJ WL-9H100
WLNJ-30 WL-9H200
WLNJ-2 WL-9H300
WLNJ-S2 WL-9H400
Actuator type Switches without levers
Model
Switches for roller levers
Basic R38 WLRCA2
High-precision R38 WLRGCA2
High-sensitivity overtravel, 80°WLRG2
General-purpose overtravel, 80°WLRH2
Overtravel, 90° operation WLRCA2-2
Overtravel, 90° operation WLRCA2-2N
Switches for adjustable
roller levers
Basic WLRCA2
High-sensitivity overtravel, 80°WLRG2
General-purpose overtravel, 80°WLRH2
Overtravel, 90° operation WLRCA2-2
Overtravel, 90° operation WLRCA2-2N
Switches for adjustable
rod lever
Basic, 25 to 140 mm WLRCL
High-sensitivity overtravel, 80°, 25 to 140 mm WLRG2
Overtravel, 90° operation, 25 to 140 mm WLRCA2-2
Overtravel, 90° operation, 25 to 140 mm WLRCA2-2N
Switches for top plungers ——
Switches for horizontal
plungers ——
Switches for fork
lever locks
Maintained, WL-5A100
Maintained, WL-5A102
Maintained, WL-5A104 WLRCA32
Switches for coil springs ——
Cover
Item Model
Neon lamp WL-LE
LED WL-LD
Cover only with
indicator
19
WL/WLM
Spatter-prevention Products
Head (with actuator) Lever Cover with indicator
Switches without Levers
WL Head Replacement
Heads can be replaced within the same model group. They cannot be replaced between different model groups.
* This Heads are special and must be used. Do not use any other Head.
Specifications
Approved Standards
Complete Heads
with allen-head
levers
Double Nut
Lever Allen-head
Lever Double Nut
Lever Cover with
Indicator
Switches
without
levers
Model Model Model Model Model Model
WL-1H1100S
(for WLCA2-@ or
WLGCA2-@)
WL-2H1100S
(for WLH2-@ or
WLG2-@)
WL-1A103S
Roller lever
WL-1A105S
Roller Lever
Neon lamp
WL-LES
WLRCA2-LDS
WLRH2-LES
WLRH2-LDS
LED (LED)
WL-LDS
WLRG2-LDS
WLRGCA2-LES
Group No. Set model number Head model number (with Actuator)
1
WLCA2 WL-1H1100
WLCA2-7 WL-1H1200
WLCA2-8 WL-1H1300
WLCA12 WL-1H2100
2WLCL WL-4H4100 *
3
WLH2 WL-2H1100-1
WLH12 WL-2H2100-1
WLHL WL-2H4100
WLHAL4 WL-2H4106
WLHAL5 WL-2H4107
4
WLCA2-2N WL-6H1100
WLCA12-2N WL-6H2100
WLCL-2N WL-6H4100
5
WLCA2-2 WL-3H1100
WLCA12-2 WL-3H2100
WLCL-2 WL-3H4100
6
WLG2 WL-2H1100
WLG12 WL-2H2100
WLGL WL-2H4100
7
WLCA32-41 WL-5H5100
WLCA32-42 WL-5H5102
WLCA32-43 WL-5H5104
WLCA32-44 WL-5H5104
8
WLD WL-7H100
WLD2 WL-7H200
WLD3 WL-7H300
9 WLD28 WL-7H400 *
10
WLSD WL-8H100
WLSD2 WL-8H200
WLSD3 WL-8H300
11 WLNJ WL-9H100
WLNJ-30 WL-9H200
12 WLNJ-2 WL-9H300 *
13 WLNJ-S2 WL-9H400 *
Agency Standard File No. Approved models
UL UL508 E76675
Contact your OMRON representative for information on approved models.
CSA CSA C22.2 No.14 LR45746
TÜV Rheinland EN60947-5-1
J50022353,
J9950023,
J9950959
CCC (CQC) GB14048.5 2004010305128675
WL/WLM
20
Ratings
Standard-load Switches
Microload Switches
(Refer to these ratings before using the product.)
Operation in the following ranges will produce optimum performance.
Approved Standard Ratings
UL/CSA
Standard-load Switches: A600, NEMA
Microload Switches
0.1 A 125 VAC, 0.1 A 30 VDC
TÜV
(EN60947-5-1) (Only models with ground terminals are approved.)
Note: As an example, AC-15: 2 A/250 V means the following:
Characteristics
Note: 1. The above figures are initial values.
2. The figures in parentheses for dielectric strength are those for the high-
sensitivity overtravel models.
*1. The values are calculated at an operating temperature of +5
°
C to +35
°
C and an
operating humidity of 40% to 70%RH. Contact your OMRON sales
representative for more detailed information on other operating environments.
*2. Durability is 10,000,000 operations min. for general-purpose or high-
sensitivity overtravel models, and for flexible rod models.
500,000 operations min. for weather-proof models.
*3. Durability is 500,000 operations min. for high-sensitivity models. All
microload models are 1,000,000 operations min.
500,000 operations min. for weather-proof models.
*4. Except flexible rod models. The shock resistance (malfunction) for
microload models is 200 m/s2 max.
*5. For low-temperature models this is –40°C to +40°C (with no icing). For heat-
resistant models the range is +5°C to +120°C.
*6. For microload models, the contact resistance is 50 mΩ max. (initial value for
built-in switch).
General-purpose/Weather-proof Switches
Item Rated
voltage
(V)
Non-inductive load (A)
Inductive load (A)
Resistive
load Lamp
load
Inductive
load Motor
load
Model NC NO NC NO NC NO NC NO
Basic models,
overtravel
models (except
for high-
sensitivity
models), and
high-precision
models
125 VAC
250 VAC
500 VAC
10
10
10
3
2
1.5
1.5
1
0.8
10
10
3
5
3
1.5
2.5
1.5
0.8
8 VDC
14 VDC
30 VDC
125 VDC
250 VDC
10
10
6
0.8
0.4
6
6
4
0.2
0.1
3
3
3
0.2
0.1
10
10
6
0.8
0.4
6
6
4
0.2
0.1
High-sensitivity
overtravel
models
125 VAC
250 VAC 5
5———
125 VDC
250 VDC 0.4
0.2 ———
Minimum applicable load 5 VDC 160 mA
* For high-sensitivity
overtravel models.
Inrush
cur-
rent
NC 30 A max.
(15 A max. *)
NO 20 A max.
(10 A max. *)
Note: 1. The above figures are for steady-state
currents.
2. Inductive loads have a power factor of 0.4 min.
(AC) and a time constant of 7 ms max. (DC).
3. A lamp load has an inrush current of 10
times the steady-state current.
4. A motor load has an inrush current of 6
times the steady-state current.
5. For PC loads, use the microload models.
Rated voltage (V) Rated current (A) - Resistive load
AC 125 0.1
DC 30
Recommended load range 5 to 30 VDC
0.5 to 100 mA
Recommended load range 5 VDC 1 mA
30
10
5
1
0.1 0.16 1 5 10 100 Current (mA)
Voltage (VDC)
5 mW 0.8 W
Rated
voltage
Carry cur-
rent
Current (A) Volt-amperes (VA)
Make Break Make Break
120 VAC
240 VAC
480 VAC
600 VAC
10 A
60
30
15
12
6
3
1.5
1.2
7,200 720
Model Application category
and ratings
Thermal cur-
rent (Ithe)Indicator
WL@AC-15: 2 A/250 V
DC-12: 2 A/48 V 10 A —
WL01@AC-14: 0.1 A/125V
DC-12: 0.1 A/48 V 0.5 A —
WL@-LE AC-15: 2 A/250 V 10 A Neon lamp
WL01@-LE AC-14: 0.1 A/125 V 0.5 A Neon lamp
WL@-LD AC-15: 2 A/115 V
DC-12: 2 A/48 V 10 A LED
WL01@-LD AC-14: 0.1 A/115 V
DC-12: 0.1 A/48 V 0.5 A LED
Application category AC-15
Rated operating current (Ie) 2A
Rated operating voltage (Ue) 250V
Model Item Max. rated voltage (V) Leakage current (mA)
WL-LE Neon
lamp
125 AC Approx. 0.6
250 AC Approx. 1.9
WL-LD LED 115 AC/DC Approx. 0.5
10 to 24 AC/DC Approx. 0.4
Indicator-equipped Switches
Degree of protection IP67
Durability
*1
Mechanical 15,000,000 operations min. *2
Electrical 750,000 operations min. *3
Operating speed 1 mm/s to 1 m/s (in case of WLCA2)
Operating
frequency
Mechanical 120 operations/minute min.
Electrical 30 operations/minute min.
Rated frequency 50/60 Hz
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 25 mΩ max. (initial value for the built-in
switch when tested alone) *6
Dielectric
strength
Between terminals
of the same polarity 1,000 VAC (600 VAC), 50/60 Hz for
1min
Between current-
carrying metal part
and ground
2,200 VAC (1,500 VAC), 50/60 Hz for
1 min/Uimp 2.5 kV
Between each termi-
nal and non-current-
carrying metal part
2,200 VAC (1,500 VAC), 50/60 Hz for
1 min/Uimp 2.5 kV
Rated insulation voltage (Ui) 250 V (EN60947-5-1)
Pollution degree (operating
environment) 3 (EN60947-5-1)
Short-circuit protective device (SCPD)
10 A, fuse type gG or gI (IEC60269)
Conditional short-circuit current 100 A (EN60947-5-1)
Conventional enclosed thermal
current (Ithe) 10 A, 0.5 A (EN60947-5-1)
Protection against electric shock Class I
Vibration
resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude *4
Shock
resistance
Destruction 1,000 m/s2 max.
Malfunction 300 m/s2 max. *4
Ambient operating temperature –10°C to +80°C (with no icing) *5
Ambient operating humidity 35% to 95% RH
Weight Approx. 275 g (in case of WLCA2)
21
WL/WLM
Ratings
Screw terminals
Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time
constant of 7 ms max. (DC).
3. A lamp load has an inrush current of 10 times the steady-state current.
4. A motor load has an inrush current of 6 times the steady-state current.
Approved Standard Ratings
UL/CSA
LE Switches (Neon lamp): A300
LD Switches (LED)
CCC (GB14048.5)
Note: As an example, AC-15: 2 A/250 V means the following:
Characteristics
Note: 1. The above figures are initial values.
2. The figures in parentheses for dielectric strength are those for the high-
sensitivity overtravel models.
*1. The values are calculated at an operating temperature of +5°C to +35°C and
an operating humidity of 40% to 70%RH. Contact your OMRON sales
representative for more detailed information on other operating
environments.
*2. Durability is 10,000,000 operations min. for general-purpose or high-
sensitivity overtravel models.
*3. Durability is 500,000 operations min. for high-precision models. All
microload models however, are 1,000,000 operations min.
Spatter-prevention Switches
Item
Rated
voltage (V)
Non-inductive load (A) Inductive load (A)
Resistive
load
Lamp
load
Inductive
load
Motor
load
Model NC NO NC NO NC NO NC NO
WL@-LES 125 VAC
250 VAC
10
10
3
2
1.5
1
10
10
5
3
2.5
1.5
WL@-LDS
115 VAC 10 3 1.5 10 5 2.5
12 VDC
24 VDC
48 VDC
10
6
3
6
4
2
3
3
1.5
10
6
3
6
4
2
Inrush
current
NC 30 A max.
NO 20 A max.
Operating temperature –10°C to +80°C (with no icing)
Operating humidity 35% to 95%RH max.
Rated
voltage Carry
current
Current (A) Volt-amperes (VA)
Make Break Make Break
120 VAC
240 VAC 10 A 60
30
6
37,200 720
Rated voltage Carry current
115 VAC 10 A
115 VDC 0.8 A
Model Application category and ratings
WL@AC-15: 2 A/250 V
DC-12: 2 A/48 V
WL01@AC-14: 0.1 A/125V
DC-12: 0.1 A/48 V
WL@-LE AC-15: 2 A/250 V
WL01@-LE AC-14: 0.1 A/125 V
WL@-LD AC-15: 2 A/115 V
DC-12: 2 A/48 V
WL01@-LD AC-14: 0.1 A/115 V
DC-12: 0.1 A/48 V
Application category AC-15
Rated operating current (Ie) 2 A
Rated operating voltage (Ue) 250 V
Degree of protection IP67
Durability
*1
Mechanical 15,000,000 operations min. *2
Electrical 750,000 operations min. *3
Operating speed 1 mm/s to 1 m/s (in case of WLCA2)
Operating
frequency
Mechanical 120 operations/minute min.
Electrical 30 operations/minute min.
Rated frequency 50/60 Hz
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 25 mΩ max. (initial value for the built-
in switch when tested alone)
Dielectric
strength
Between
terminals of
the same
polarity
1,000 VAC (600 VAC), 50/60 Hz for
1min
Between
current-
carrying
metal part
and ground
2,200 VAC (1,500 VAC), 50/60 Hz for
1 min/Uimp 2.5 kV
Between
each
terminal and
non-current-
carrying
metal part
2,200 VAC (1,500 VAC), 50/60 Hz for
1 min/Uimp 2.5 kV
Rated insulation voltage
(Ui) 250 V (EN60947-5-1)
Pollution degree
(operating environment) 3 (EN60947-5-1)
Short-circuit protective
device (SCPD) 10 A, fuse type gG or gI (IEC60269)
Conditional short-circuit
current 100 A (EN60947-5-1)
Conventional enclosed
thermal current (Ithe) 10 A, 0.5 A (EN60947-5-1)
Protection against
electric shock Class I
Vibration
resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock
resistance
Destruction 1,000 m/s2 max.
Malfunction 300 m/s2 max.
Ambient operating
temperature –10°C to +80°C (with no icing)
Ambient operating
humidity 35% to 95%RH
Weight Approx. 275 g (in case of WLCA2)
WL/WLM
22
Ratings
General Ratings (Refer to these ratings before using the product.)
Screw Terminal Switches * For high-sensitivity overtravel models.
Direct-wired Connector and Pre-wired Connector Switches
Note: 1. The above figures are for steady-state currents.
2. Inductive loads have a power factor of 0.4 min. (AC) and a time
constant of 7 ms max. (DC).
3. A lamp load has an inrush current of 10 times the steady-state current.
4. A motor load has an inrush current of 6 times the steady-state current.
Characteristics
Note: The figures in parentheses for dielectric strength, are those for overtravel
(high-sensitivity) or connector models.
* The values are calculated at an operating temperature of +5°C to +35°C, and
an operating humidity of 40% to 70%RH. Contact your OMRON sales
representative for more detailed information on other operating environments.
Engineering Data
Electrical Durability: cosφ= 1
(Operating temperature: +5°C to +35°C, operating humidity: 40% to
70%RH)
Long-life Switches
Item Rated
voltage
(V)
Non-inductive load (A) Inductive load (A)
Resistive
load
Lamp
load
Induc-
tive load
Motor
load
Model NC NO NC NO NC NO NC NO
Basic models,
overtravel mod-
els, (except for
high-sensitivity
models), and
high-precision
models
115 AC 10 3 1.5 10 5 2.5
12 DC
24 DC
48 DC
115 DC
10
6
3
0.8
6
4
2
0.2
3
3
1.5
0.2
10
6
3
0.8
6
4
2
0.2
High-sensitivity
overtravel mod-
els
115 AC 5———
115 DC 0.4 — — —
Inrush
current
NC 30 A max. (15 A max. *)
NO 20 A max. (10 A max. *)
Rated
voltage
(V)
Non-inductive load (A) Inductive load (A)
Model Resistive
load Lamp load Inductive
load Motor load
NC NO NC NO NC NO NC NO
DC
12 DC
33333333
24 DC
33333333
48 DC
33333333
115 DC
0.8 0.8 0.2 0.2 0.8 0.8 0.2 0.2
AC
115 AC
3331.53332.5
Degree of protection IP67
Durability *
Mechanical 30,000,000 operations min.
Electrical
30,000,000 operations min. (10 mA at
24 VDC, resistive load)
750,000 operations min. (10 A at 115
VAC, resistive load), but for high-pre-
cision models: 500,000 operations
min. (10 A at 115 VAC, resistive load)
Operating speed 1 mm/s to 1 m/s (in case of WLCA2)
Operating
frequency
Mechanical 120 operations/minute
Electrical 30 operations/minute
Rated frequency 50/60 Hz
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 25 mΩ max. (initial value for the built-
in switch when tested alone)
Dielectric
strength
(50/60 Hz
for 1 min)
Between
terminals of
the same
polarity
1,000 VAC (except connector models)
Between
current-
carrying
metal part
and ground
2,200 VAC (1,500 V)
Between each
terminal and
non-current-
carrying metal
part
2,200 VAC (1,500 V)
Vibration
resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock
resistance
Destruction 1,000 m/s2 max.
Malfunction 300 m/s2 max.
Ambient operating
temperature –10°C to +80°C (with no icing)
Ambient operating
humidity 35% to 95%RH
Weight Approx. 275 g (in case of WLCA2)
1,000
500
300
100
50
30
10
024 6 810 12
Switching current (A)
Durability (× 104 operations)
Operating frequency:
30 operations/min cos φ= 1
125 VAC
250 VAC
480 VAC
23
WL/WLM
Structure and Nomenclature
Structure
*1. The display for conduit threads has changed from PF½ to G½, according to revisions of JIS B 0202. This is only a change in the display, so the thread size and
pitch have not changed. (Conduit threads Pg 13.5 and ½-14NPT are also available.)
*2. By changing the orientation of the operational plunger, any one of the three operational directions (both sides, left, or right) can be selected electrically.
General-purpose Switches: WLCA2
Set Position Marker Plate
Head
Shaft Section Seal
Built-in Switch
Conduit Opening *1
Bearing
Roller
Actuator
Lever
Separator
Cover Setscrew
Terminal Screws
Cover
Four, M4 screws
Operational Plunger *2
Roller Lever Setscrew
Requires maintenance (insufficient overtravel)
Cover Seal
Proper range
Proper range
Head-mounting Screws
Requires maintenance
(excessive overtravel)
Requires maintenance
(excessive overtravel)
The bearing smooths the
plunger movement.
The separator has outstanding insulation
properties and prevents the generation of any
gases which may corrode the internal parts.
By using a packing seal as the cover seal,
an optimum squeeze can be obtained and
high sealing properties are assured as well.
The conduit threads are parallel threads
for G½ tube and offer further increased
sealing properties when used in
conjunction with the SC connector.
The roller is made of self-lubricating
sintered stainless steel and boasts
high resistance to wear.
The lever forged of anti-corrosive
aluminium alloy features high corrosion
resistances and outstanding ruggedness.
With roller lever, adjustable rod and
flexible rod models, the actuator position
can be set anywhere within 360°. (The
lever cannot be mounted in the opposite
direction.)
Built-in switch with SPST-NO+NC
contact form.
The Head used in the roller lever type,
adjustable rod lever type, or horizontal
plunger type (except for 90° operation
models) can be mounted in any of the
four directions by removing the screws
at the four corners of the Head.
By fitting an O-ring to the rotary shaft
and with an appropriate interference
of the screws, high-sealing properties
are maintained.
After operation, set the indicator needle
on the marker plate so that is in the
convex section of the bearing. For the
WLD2, insert the needle so that it is
between the two main wires on the
plunger.
Phillips screws are used
to ensure ease of use.
WL/WLM
24
Note: 1. The indicator cover cannot be replaced on the molded terminals. In all cases the indicator does not light when the load is ON.
2. Leakage current from indicator circuit may cause load's malfunction. Please check the load's OFF current before use the indicator-equipped switch.
*1. Light-ON when operating means that the lamp lights when the Limit Switch contacts (NC) release, or when the actuator rotates or is pushed down.
*2. Light-ON when not operating means the lamp remains lit when the actuator is free, or when the Limit Switch contacts (NO) close when the actuator rotates or is
pushed down.
Indicators
Indicator
Contact Spring
Indicator Covers
Indicator Windows
Light-ON when Operating/Not Operating
The indicator covered if outsert molded
from diecast aluminum and has
outstanding sealing properties.
Operation (i.e., light-ON when operating
or light-ON when not operating) depends
on whether a neon lamp or LED is used.
Indicators can be switched from light-ON
when operating and light-ON when not
operating, by simply rotating the indicator
holder by 180°.
(Molded terminals cannot be switched in
this way.)
The indicator is either a neon lamp or
an LED. Models with LED indicators
have a built-in rectifier stack, so it is not
necessary to change the polarity.
The built-in switch's terminal screws
are used to connect the indicator
terminal. Since the connection spring
(coil spring) is used for this connection,
it will not be necessary to connect the
indicator terminal. When a ground
terminal is provided however, a lead
wire must be used.
LED at top
LED at bottom
Light-ON when Operating Light-ON when Not Operating
Operation
WL-LE
WL-LD
Light-ON when
operating *1
Light-ON when
not operating *2
Power
Built-in switch
Internal circuits
Load
3
Za
2
4
1
Power
Built-in switch
Internal circuits
Load
3
2
4
1
Za
Internal Circuits
WL-LE
WL-LD
Contact spring
Neon lamp
Resistor
Contact spring Rectifier stack
LED
Zener
diode
Resistor
Resistor
Rated
current
diode
25
WL/WLM
Environment-resistant Switches
Spatter-prevention Switches: WLCA2-LEAS
Airtight
built-in
switch
: Molded part
s
O-ring
Airtight
built-in
switch
Oil seal for protection against cutting powder
X-ring
Airtight
built-in
switch
Airtight
built-in
switch
* Florine rubber is used for
all rubber parts.
Mold Specifications for Hermetic Seal Switches
Standard
built-in
switch
Model Cable specifications
WL@-139
Standard 5-m VCT (vinyl cabtire cable) cable attached. Finished diameter: 11.5 mm, 4-conductor.
WL@-140
WL@-141
WL@-145
WL@RP40
WL@RP60
Standard 5-m VCT cable, with high flexibility and good anti-oil properties attached. Finished
diameter: 11.5 mm, 4-conductor.
Oil seal for protection against cutting powder
X-ring
Airtight
built-in
switch
WL@-139 WL@-140 WL@-141
WL@-145 WL@-RP40 WL@-RP60
Screws
Lamp Cover
Head Cap
SUS is used for double nut.
Roller, Roller Axis
Operating Lever
Double Nut
Actuator
Using stainless steel prevents spatter
from adhering.
SUS is used, preventing spatter
from adhering.
Using fluororesin prevents spatter
from adhering.
* Spatter means the zinc powder
produced when welding.
Adhering spatter to the Limit Switch
may cause malfunction of lever or
lamp cover.
The lack of gap prevents spatter
powder from clogging.
Melamine sinter-painted, it is easy to
peel off the spatter.
· Heat-resistant resin is used for the
lamp cover.
· By using spherical surface for the
display part, it disperses the direction
of spatter.
WL/WLM
26
* By changing the direction of the operational plunger, any one of the three
operational directions (both sides, left, or right) can be selected.
Long-life Switches: WLMGCA2-LD
Set Position Marker Plate
Head
Mounting
Screws
The set position is easy to view.
Head
Release Plunger
Shaft Section Seal
Built-in Switch
Conduit Opening
Bearing
Roller
Lever
Cover Seal
Separator
Cover Mounting Screw
Terminal Screws
Cover
Four, M4 screws
Operational Plunger *
Long-life Model
X-ring
Oil seal
O-ring
Standard Model
Grease holder
Long-life Model
Standard Model
Fluorescent paint
Long-life ModelStandard Model
Long-life Model
Standard Model
Requires maintenance (excessive overtravel)
Requires maintenance (excessive overtravel)
Requires maintenance (insufficient overtravel)
Proper range
Proper range
Actuator
By using a packing seal as the
cover seal, an optimum squeeze
can be obtained and high sealing
properties are assured as well.
The roller is made of self-lubricating stainless
sintered and boasts high resistance to wear.
The lever forged of anti-corrosive aluminium
alloy features high corrosion resistance and
outstanding ruggedness. With roller lever
models, the actuator position can be set
anywhere within 360°. (The lever cannot be
mounted in the opposite direction.)
The stroke is indicated in fluorescent color that
is visible from the slit in the rubber cap.
The separator has outstanding
insulation properties and prevents
the generation of any gases
which may corrode the internal
parts.
Phillips screws are used to
ensure ease of use.
In addition to level screws which use G½
tube, direct-wired and pre-wired connectors
have been added to the Series.
Built-in switch with SPST-NO+NC
contact form.
The bearing smooths the plunger
movement.
Smooth movement is achieved using
olefin grease. (Standard models use
molybdenum disulfide grease.)
By fitting a double seal consisting of an
oil seal and an X-ring to the rotary
shaft, even greater sealing properties
are achieved.
Smoother Movement
A grease holder is provided on the
shaft to prevent the grease from
running out.
The Head can be mounted in any of the
four directions by removing the screws
at the four corners of the Head.
Hardening method changed for greater
abrasion resistance.
Sintered
alloy
Stainless
steel +
Hardening
27
WL/WLM
Contact Forms
Screw Terminal Switches Screw Terminal Switches
Indicator-equipped (Light-ON when Not Operating)
Switches *1
Direct-wired Connector Switches
Indicator-equipped (Light-ON when Not Operating)
Switches *1
Pre-wired Connector Switches
Indicator-equipped (Light-ON when Not Operating)
Switches *1
Note: Leakage current from indicator circuit may cause load's malfunction. Please check the load's OFF current before use the indicator-equipped switch.
*1. Light-ON when not operating means the indicator is lit when the actuator is free and is not light when the Switch contacts (NO) close when the actuator rotates or
is pushed down.
*2. The position of the positioning piece is not always the same. If using an L-shaped connector causes problems in application, use a straight connector.
3 (NO)
2 (NC)
(NO) 4
(NC) 1
Za
3 (NO)
2 (NC)
(NO) 4
(NC) 1
Internal
circuits
Za
2
3
4
1
NC
NC
NO
NO
2
3
4
1
NC
NC
NO
NO
NONCNCNO
4
Internal
circuits
-- -- 3
4
2-core
connector pin
No.
connector pin
No.
4-core 1 2 3
NONCNCNO
4-- -- 3
4
2-core
4-core 1 2 3
AC DC
Za Za
Internal
circuits
Positioning piece *2Positioning piece *2
NONCNCNO
4
Internal
circuits
-- -- 3
4
2-core
connector pin
No.
connector pin
No.
3 2
1
NONCNCNO
4-- 3
4
3-core
4-core 1 2
2
3
DC (2-core) DC (3-core, 4-core)
Za Za
Internal
circuits
WL/WLM
28
Dimensions and Operating Characteristics (Unit: mm)
Basic
Rotating Lever........ For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
General-purpose Models
Standard Models
M5 (length: 12)
Allen-head bolt
Three, M4
(lengh:13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, M6
Depth: 15 min.
* Stainless sintered roller
Four, 5.2
+0.2
dia. holes
0
60 max.
25.4
68.7
12.7
25.4
13.1
40
±1.5
41.5
±1.5
53
±1.5
14.7
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
5
(125)
38R
Four, M3.5
17.5 dia. × 7 *
60 max.
53.2
±0.8
35
29.2
21.6
±1.2
Roller lever R38
WLCA2
WL01CA2
M5 (length: 12)
Allen-head bolt
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, M6
Depth: 15 min.
Four, 5.2+0.2
dia. holes
0
67.2 max.
25.4
68.7
12.7
25.4
13.1
36 ±1.5
58.1 ±1.5
14.7
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
5
(137)
50R Four, M3.5
17.5 dia. × 15 *
42 max.
53.2 ±0.8
35
29.2
21.6
±1.2
* Stainless steel roller
Roller lever R50
WLCA2-7
WL01CA2-7
M5 (length: 12)
Allen-head bolt
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, M6
Depth: 15 min.
Four, 5.2+0.2
dia. holes0
60 max.
25.4
68.7
12.7
25.4
13.1
40 ±1.5
41.5 ±1.5
53 ±1.5
14.7
30.2 ±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
5
(150)
63R
Four, M3.5
17.5 dia. × 7 *
42 max.
53.2 ±0.8
±1.2
35
29.2
21.6
* Stainless sintered roller
Roller lever R63
WLCA2-8
WL01CA2-8
Four, M6
Depth: 15 min.
67 max.
25.4
68.7
12.7
25.4
13.1
41.5
±1.5
60
±1.5
14.7
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
5
Adjustable range:
25 to 89
42 max.
65.2
±0.8
35
29.2
21.6
±1.2
M5 (length: 16)
Allen-head bolt
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
17.5 dia. × 7 *
* Stainless sintered roller
Adjustable Roller Lever
WLCA12
WL01CA12
M5 × 12
Allen-head
bolt
Four, M6
Depth: 15 min.
* Stainless steel rod
55 max.
25.4
68.7
12.7
25.4
13.1
46 ±1.5
14.7
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
5
3 ±0.2 dia.
(length: 160) *
42 max.
35
Adjustable range:
25 to 140
9
29.2
21.6
±1.2
M8×12
Allen-head
set screw
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
Adjustable Rod Lever (25 to 140 mm)
WLCL
WL01CL
Four, M6
Depth: 15 min.
62.5 max.
34.1
68.7
12.7
25.4
13.1
42.8
±3.5
56.4
±3.5
14.7
30.2
±0.2
(4.9) (15.1)
58.7
±0.2
5
(125)
R38
Two, 17.5 dia.
(length: 7) *
42 max.
35
29.2
21.6
±1.2
90
±3°
M5 × 16
Allen-head bolt
40
±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
* Plastic roller
(Models WLCA32-041 to -044 and WL01CA32-
041 to -044 have stainless steel rollers.)
Note: This illustration shows
the external dimensions
of the WLCA32-41.
Fork Lever Lock
WLCA32-41 to 44
WL01CA32-41 to 44
(For details
see page 46)
*1. The operating characteristics for WLCA12 and WL01CA12 are measured at the lever length of
38 mm.
*2. The operating characteristics for WLCL and WL01CL are measured at the rod length of 140 mm.
Model
Operating characteristics
WLCA2
WL01CA2
WLCA2-7
WL01CA2-7
WLCA2-8
WL01CA2-8
WLCA12 *1
WL01CA12 *1
WLCL *2
WL01CL *2
Operating force
Release force
Pretravel
Overtravel
Movement Differential
OF max.
RF min.
PT
OT min.
MD max.
13.34 N
2.23 N
15° ±5°
30°
12°
10.2 N
1.67 N
15° ±5°
30°
12°
8.04 N
1.34 N
15° ±5°
30°
12°
13.34 N
2.23 N
15° ±5°
30°
12°
1.39 N
0.27 N
15° ±5°
30°
12°
OF and RF for WLCA12, with a lever length of 89 mm.
Model
Operating characteristics
WLCA32-41 to 44 *1
WL01CA32-41 to 44 *1
Force necessary to reverse the
direction of the lever: Max.
Movement until the lever reverses
Movement until switch operation: Min.
Movement after switch operation: Max.
11.77 N
50° ±5°
55°
35°
WLCA12, WL01CA12
OF 5.68 N
RF 0.95 N
29
WL/WLM
Basic
Plunger .................... For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all
dimensions.
Model
Operating characteristics WLD
WL01D WLD2
WL01D2 WLD3
WL01D3 WLD28
WL01D28 WLSD2
WL01SD2 WLSD3
WL01SD3 WLSD
WL01SD
Operating force
Release force
Pretravel
Overtravel
Movement Differential
OF max.
RF min.
PT max.
OT min.
MD max.
26.67 N
8.92 N
1.7 mm
6.4 mm
1 mm
26.67 N
8.92 N
1.7 mm
5.6 mm
1 mm
26.67 N
8.92 N
1.7 mm
4 mm
1 mm
16.67 N
4.41 N
1.7 mm
5.6 mm
1 mm
40.03 N
8.89 N
2.8 mm
5.6 mm
1 mm
40.03 N
8.89 N
2.8 mm
4 mm
1 mm
40.03 N
8.89 N
2.8 mm
6.4 mm
1 mm
Operating Position
Total travel Position OP
TTP max.
34 ±0.8 mm
29.5 mm 44 ±0.8 mm
39.5 mm 44.5 ±0.8 mm
41 mm 44 ±0.8 mm
39.5 mm 54.2 ±0.8 mm
—54.1 ±0.8 mm
—40.6 ±0.8 mm
—
Four, M6
Depth: 15 min.
* Stainless steel plunger
19.9
68.7
12.9
13.1
OP
PT 9.2 dia.
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
5
1R *
42 max.
35
29.2
21.6
±1.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2
+0.2
dia. holes
0
Four, M3.5
Top Plunger
WLD
WL01D
Four, M6
Depth: 15 min.
27.5
68.7
12.7
13.1
46.6 ±0.8
17.8
30.2
±0.2
(4.9) (15.1)
58.7 ±0.2
5
(96.2)
25.4
42 max.
35
OPPT
25 dia. *2
29.2
21.6
±1.2
*1. Stainless steel plunger
*2. Cosmetic nuts
40 ±0.7
1R *1
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
Horizontal Plunger
WLSD
WL01SD
Four, M6
Depth: 15 min.
* Stainless sintered roller
28
68.7
12.9
13.1
OP
PT
30.2
±0.2
(4.9) (15.1)
58.7
±0.2
5
17.5 dia. (length: 4.6) *
42 max.
35
29.2
21.6
±1.2
40
±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
Top-roller Plunger
WLD2
WL01D2
Note: The WLSD21 model, which has the roller rotated by 90° is also available.
Four, M6
Depth: 15 min.
27.5
68.7
12.7
13.1
55.7
±0.8
17.8
30.2
±0.2
(4.9) (15.1)
58.7 ±0.2
5
(96.2)
25.4
42 max.
35
OPPT
25 dia. *2
*1. Stainless sintered roller
*2. Cosmetic nuts
29.2
21.6
±1.2
17.5 dia.
(length: 4.6)*1
40 ±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
Horizontal-roller Plunger
WLSD2
WL01SD2
Four, M6
Depth: 15 min.
* Stainless steel ball
19.9
68.7
12.9
13.1
OP
PT
15.5 dia.
30.2
±0.2
(4.9) (15.1)
58.7 ±0.2
5
1/2 dia. *
42 max.
35
29.2
21.6
±1.2
40 ±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
Top-ball Plunger
WLD3
WL01D3
Four, M6
Depth: 15 min.
27.5
68.7
12.7
13.1
46.6 ±0.8
17.8
30.2
±0.2
(4.9) (15.1)
58.7 ±0.2
5
(96.2)
25.4
42 max.
35
OPPT
25 dia. *2
*1. Stainless steel ball
*2. Cosmetic nuts
29.2
21.6
1/2 dia. *1
40 ±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
±1.2
Horizontal-ball Plunger
WLSD3
WL01SD3
Four, M6
Depth: 15 min.
* Stainless steel roller
24
68.7
12.9
13.1
OP
PT
30.2
±0.2
(4.9) (15.1)
58.7 ±0.2
5
11.2 dia. (length: 5) *
42 max.
35
29.2
21.6
40 ±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M3.5
±1.2
Sealed Top-roller Plunger
WLD28
WL01D28
WL/WLM
30
Basic
Flexible Rod............ For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
* These values are taken from the top end of the wire or spring.
Model
Operating characteristics WLNJ *
WL01NJ *WLNJ-30 *
WL01NJ-30 *WLNJ-2 *
WL01NJ-2 *WLNJ-S2 *
WL01NJ-S2 *
Operating force
Pretravel OF max.
PT 1.47 N
20 ±10mm
1.47 N
20 ±10mm
1.47 N
40 ±20mm
0.28 N
40 ±20mm
Four, M6
Depth: 15 min.
68.7
13.1
32.7
±0.8
(107)
*3
30.2
±0.2
(4.9) (15.1)
58.7
±0.2
5
42 max.
35
140
±2.5
PT *1 6.5 dia. *2
29.2
21.6
40
±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
±1.2
*1. The coil spring may be operated from any direction except the
axial direction (↓).
*2. Stainless steel coil spring
*3. Optimum operating range of the coil spring is within 1/3 of the
entire length from the top end.
Coil Spring
WLNJ
WL01NJ
Four, M6
Depth: 15 min.
68.7
13.1
32.7 ±0.8
(107)
30.2
±0.2
(4.9) (15.1)
58.7 ±0.2
5
42 max.
35
140 ±2.5
PT 4.8 dia.
*2
*1
*3
29.2
21.6
±1.2
40 ±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
*1. The coil spring may be operated from any direction except the
axial direction (↓).
*2. Piano wire coil
*3. Optimum operating range of the coil spring is within 1/3 of the
entire length from the top end.
Coil Spring (Multi-wire)
WLNJ-30
WL01NJ-30
68.7
8 dia.
26 dia.
*1
*2
*3
13.1
44.6
±0.8
(95.4)
30.2
±0.2
(4.9) (15.1)
58.7
±0.2
5
42 max.
35
140
±2.5
PT
29.2
21.6
40
±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
*1. The resin rod may be operated from any direction except the axial
direction (↓).
*2. Polyamide resin rod
*3. Optimum operating range of the resin rod is within 1/3 of the
entire length from the top end.
Four, M6
Depth: 15 min.
±1.2
Coil Spring (Resin Rod)
WLNJ-2
WL01NJ-2
68.7
13.1
32
±0.8
(161)
30.2
±0.2
(4.9) (15.1)
58.7
±0.2
5
42 max.
35
193
±2.5
PT
*2
29.2
21.6
40
±0.7
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
*1. The steel wire may be operated from any direction except the
axial direction (↓).
*2. Stainless steel wire
*3. Optimum operating range of the steel wire is within 1/3 of the
entire length from the top end.
1 dia.
Four, M6
Depth: 15 min.
±1.2
*1
*3
Steel Wire
WLNJ-S2
WL01NJ-S2
31
WL/WLM
Overtravel
General-purpose/High-sensitivity Models
........... For all models WL
@
indicates a standard-load model and WL01
@
indicates a microload model.
Note: With WLHAL4, WL01HAL4, WLHAL5, and WL01HAL5, the actuator's tare is large, so depending on the installation direction, they may not be properly reset.
Always install so that the actuator is facing downwards.
*1. The operating characteristics of WLH12, WL01HL12, WLG12, and WL01G12 are measured at the lever length of 38 mm.
*2. The operating characteristics of WLHL, WL01HL, WLGL, and WL01GL are measured at the rod length of 140 mm.
*3. The operating characteristics of WLHAL4, and WL01HAL4 are measured at the rod length of 380 mm.
Model
Operating characteristics WLH2
WL01H2 WLG2
WL01G2
WLH12 *1
WL01H12 *1WLG12 *1
WL01G12 *1
WLHL *1
WL01HL *1
WLGL *
2
WL01GL *
2
WLHAL4 *
3
WL01HAL4 *
3WLHAL5
WL01HAL5
Operating force OF max.
Release force RF min.
Pretravel PT
Overtravel OT min.
Movement Differential MD max.
9.81 N
0.98 N
15° ±5°
55°
12°
9.81 N
0.98 N
10°
65°
7°
9.81 N
0.98 N
15° ±5°
55°
12°
9.81 N
0.98 N
10°
65°
7°
2.84 N
0.25 N
15° ±5°
55°
12°
2.84 N
0.25 N
10°
65°
7°
0.98 N
0.15 N
15° ±5°
55°
12°
0.90 N
0.09 N
15° ±5°
55°
12°
60 max.
25.4
68.7
12.7
25.4
13.1
40
±1.5
41.5
±1.5
53
±1.5
14.7
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
5
(125)
38R
42 max.
53.2
±0.8
35
29.2
21.6
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Note: 1. WL@G2 is identical to other models except in
the shape of the set position marker plate.
2. The built-in switch for WLH2 is W-10FB3.
3. The built-in switch for WLG2 is W-10FB3-8.
17.5 dia. (length: 7) *
Four, M3.5
M5 (length: 12)
Allen-head bolt
Four, M6
Depth: 15 min.
* Stainless sintered roller
±1.2
Roller Lever R38
WLH2
WL01H2
WLG2
WL01G2
55 max.
25.4
68.7
12.7
25.4
13.1
46 ±1.5
14.7
5
3 ±0.2 dia.
(length: 160) *
42 max.
35
Adjustable range:
25 to 140
9
29.2
21.6
41.5
±1.5
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Note: 1. WL@GL is identical to other models except in
the shape of the set position marker plate.
2. The built-in switch for WLHL is W-10FB3.
3. The built-in switch for WLGL is W-10FB3-8.
Four, M3.5
M8 (length: 12)
Allen-head
lock screw
M5 (length: 12)
Allenhead bolt
Four, M6
Depth: 15 min.
* Stainless sintered roller
±1.2
Adjustable Rod Lever
WLHL
WL01HL
WLGL
WL01GL
M5 (length: 16)
Allen-head
bolt
67 max.
25.4
68.7
12.7
25.4
13.1
60 ±1.5
14.7
5
Adjustable range:
25 to 89
42 max.
65.2 ±0.8
35
29.2
21.6
41.5
±1.5
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Note: 1. WL@G12 is identical to other models except in
the shape of the set position marker plate.
2. The built-in switch for WLH12 is W-10FB3.
3. The built-in switch for WLG12 is W-10FB3-8.
17.5 dia. (length: 7) *
Four, M3.5
Four, M6
Depth: 15 min.
* Stainless sintered roller
±1.2
Adjustable Roller Lever
WLH12
WL01H12
WLG12
WL01G12
25.4
68.7
12.7
25.4
13.1
14.7
5
42 max.
35
8
12.8
65
29.2
21.6
M5 (length: 12)
Allen-head
bolt
54.5
±1.5
Adjustable range:
350 to 380
41.5
±1.5
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
3.2 dia. *
Four, M6
Depth: 15 mi
* Stainless steel rod
±1.2
Adjustable Rod Lever
WLHAL4
WL01HAL4
25.4
68.7
12.7
25.4
14.7
428.5 ±2
5
7.7
65
11
21.6
13.1
42 max.
35
29.2
M5 (length: 16)
Allen-head
bolt
54 ±1.5
41.5
±1.5
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
2.3 dia. *
Four, M6
Depth: 15 min.
* Piano wire
±1.2
Rod Spring Lever
WLHAL5
WL01HAL5
OF and RF for WLH12 and WL01H12, with a lever length of
89 mm.
WLH12, WLA01H12 WLG12, WL01G12
OF 4.18 N 4.18 N
RF 0.42 N 0.42 N
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all
dimensions.
Note: 2. The WL-N high-sensitivity, high-precision models have been integrated
into the WL Series. If you are scheduled to use the WL-N high-
sensitivity, high-precision models, order WL models instead.
+2°
–1°
+2°
–1°
+2°
–1°
WL/WLM
32
Overtravel
Side-installation Models... For all models WL@ indicates a standard-load model and WL01@ indicates a microload model.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
* Stainless sintered roller
60 max.
(10.8)
64 ±0.2
11.5
13.1
11
40 ±1.5
16.1
5
(126.5)
38R
Four, M3
17.5 dia. (length: 7) *
35
33 ±1.2
21.6
Two, M5
(length: 18)
5
23
101.8
5
22
42 max.
M5 (length: 12)
Allen-head bolt
53 ±1.5
41.5
±1.5
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Two, 5.2 +0.2
dia. holes0
Four, M6
Depth: 15 min.
±0.2
Roller Lever
WLCA2-2N
WL01CA2-2N
25.4
68.7
12.7
25.4
13.1
16.1
5
35
29.2
21.6
* Stainless sintered roller
60 max.
40 ±1.5
(126.5)
38RFour, M3.5
17.5 dia. (length: 7) *
53.2 ±0.8
42 max.
M5 (length: 12)
Allen-head bolt
53 ±1.5
41.5
±1.5
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M6
Depth: 15 min.
±1.2
Roller Lever
WLCA2-2
WL01CA2-2
11.5
13.1
11
16.1
5
Adjustable range:
25 to 89
35
33
±1.2
21.6
Two, M5
(length: 18)
5
23
101.8
5
22
* Stainless sintered roller
67 max.
Four, M3
17.5 dia. (length: 7) *
42 max.
M5 (length: 16)
Allen-head bolt
60
±1.5
41.5
±1.5
30.2
±0.2
40
±0.7
64
±0.2
(4.9)
(10.8)
(15.1)
58.7
±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2
+0.2
dia. holes
0
Two, 5.2
+0.2
dia. holes
0
Four, M6
Depth: 15 min.
±0.2
Adjustable Roller Lever
WLCA12-2N
WL01CA12-2N
25.4
68.7
12.7
25.4
13.1
16.1
5
35
29.2
21.6
Adjustable range:
25 to 89
65.2
±0.8
* Stainless sintered roller
67 max.
Four, M3.5
17.5 dia. (length: 7) *
42 max.
M5 (length: 16)
Allen-head bolt
60
±1.5
41.5
±1.5
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Four, M6
Depth: 15 min.
±1.2
Adjustable Roller Lever
WLCA12-2
WL01CA12-2
M8 (length: 12)
Allen-head
lock screw
* Stainless steel rod
(10.8)
64 ±0.2
11.5
13.1
11
16.1
5
35
21.6
Two, M5 (length: 18)
5
23
101.8
5
22
9
Adjustable range:
25 to 140
55 max.
Four, M3
3 ±0.2 dia.
(length: 160) *
42 max.
M5 (length: 12)
Allen-head bolt
46 ±1.5
33
±1.2
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes0
Two, 5.2 +0.2
dia. holes0
Four, M6
Depth: 15 min.
±0.2
Adjustable Rod Lever
WLCL-2N
WL01CL-2N
25.4
68.7
12.7
25.4
13.1
16.1
5
35
9
29.2
21.6
M8 (length: 12)
Allen-head
lock screw
* Stainless steel rod
Adjustable range:
25 to 140
55 max.
Four, M3.5
3 ±0.2 dia.
(length: 160) *
42 max.
M5 (length: 12)
Allen-head bolt
46 ±1.5
41.5 ±1.5
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Adjustable Rod Lever
WLCL-2
WL01CL-2
*1. The operating characteristics of WLCA12-2N and WL01CA12-2N are measured at the lever length of 38 mm.
*2. The operating characteristics of WLCL-2N and WL01CL-2N are measured at the rod length of 140 mm.
Model
Operating characteristics
WLCA2-2N
WL01CA2-2N
WLCA12-2N *1
WL01CA12-2N *1
WLCL-2N *2
WL01CL-2N *2
WLCA2-2
WL01CA2-2
WLCA12-2 *1
WL01CA12-2 *1
WLCL-2 *2
WL01CL-2 *2
Operating force OF max.
Release force RF min.
Pretravel PT
Overtravel OT min.
Movement Differential MD max.
9.61 N
1.18 N
20° max.
70°
10°
9.61 N
1.18 N
20° max.
70°
10°
2.84 N
0.25 N
20° max.
70°
10°
8.83 N
0.49 N
25° ±5°
60°
16°
8.83 N
0.49 N
25° ±5°
60°
16°
2.55 N
0.1 N
25° ±5°
60°
16°
OF and RF for WLCA12-2N
and WL01CA12-2N, with a
lever length of 89 mm.
WLCA12-2N,
WLA01CA12-2N
OF 4.10 N
RF 0.50 N
33
WL/WLM
High-precision Models
WL@ are Standard Models and WL01@ are Microload Models.
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Note: 2. The WL-N high-sensitivity, high-precision models have been integrated into the WL Series. If you are scheduled to use the WL-N high-sensitivity, high-precision
models, order WL models instead.
Direct-wired Connector/Pre-wired Connector Models
Refer to page 17 for the connecting cable.
Roller Lever Plungers ....... WL@ are Standard Models and WL01@ are Microload Models.
Standard Models (WLCA2), High-precision Models (WLGCA2),
Overtravel General-purpose Models (WLH2), Overtravel High-sensitivity Models (WLG2)
Note: 1. Only the dimension of the set position marker plate is different for WLG2 Models.
2. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
3. The models with operation indicators are shown in the above diagrams.
Actuator
Operating characteristics Standard roller lever
actuator High-precision roller
lever actuator
Overdrive general-
purpose actuator Overdrive high-sensitivity
actuator
Operating force OF max.
Release force RF min.
Pretravel PT
Overtravel OT min.
Movement Differential MD max.
13.34 N
2.23 N
15° ±5°
30°
12°
13.34 N
1.47 N
5°
40°
3°
9.81 N
0.98 N
15° ±5°
55°
12°
9.81 N
0.98 N
10°
65°
7°
* Stainless sintered roller
25.4
68.7
12.7
25.4
13.1
14.7
5
38R
17.5 dia. (length: 7) *
35
29.2
21.6
60 max.
Four, M3.5
42 max.
M5 (length: 12)
Allen-head bolt
53 ±1.5
41.5 ±1.5
40 ±1.5
30.2
±0.2
40 ±0.7
53.2 ±0.8
(4.9)
(125)
(15.1)
58.7 ±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Roller Lever
WLGCA2
WL01GCA2
Model
Operating characteristics WLGCA2
WL01GCA2
Operating force OF max.
Release force RF min.
Pretravel PT
Overtravel OT min.
Movement Differential MD max.
13.34 N
1.47 N
5°
40°
3°
+2°
0°
Sensor I/O Connector Switches
25.4
68.7
12.7
25.4
13.1
14.7
5
12.5
35
29.2
21.6
* Stainless sintered roller
38R
17.5 dia. (length: 7) *
60 max.
Four, M3.5
42 max.
M5 (length: 12)
Allen-head bolt
53 ±1.5
41.5 ±1.5
40 ±1.5
30.2
±0.2
40 ±0.7
53.2 ±0.8
(4.9) (15.1)
58.7 ±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
M12 × 1
±1.2
Connector Models
25.4
68.7
12.7
25.4
13.1
14.7
5
35
29.2
21.6
XS2H-D421
SC-1M
* Stainless sintered roller
38R
17.5 dia. (length: 7) *
60 max.
Four, M3.5
42 max.
M5 (length: 12)
Allen-head bolt
53 ±1.5
41.5 ±1.5
40 ±1.5
30.2
±0.2
40 ±0.7
300 +100
-50
53.2 ±0.8
(4.9)
(20)
(15.1)
58.7 ±0.2
Three, M4
(length: 13)
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
6 dia.
M12 × 1
±1.2
Pre-wired Connector Models
+2°
0°
+2°
0°
WL/WLM
34
Top-roller Plunger (WLD2)
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
2. The following diagrams are for a indicator-equipped models.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Actuator
Operating characteristics Top-roller plunger
Operating force OF max.
Release force RF min.
Pretravel PT max.
Overtravel OT min.
Movement Differential MD max.
26.67 N
8.92 N
1.7 mm
5.6 mm
1 mm
Operating Position OP
Total travel Position TTP max.
44 ±0.8mm
39.5 mm
Actuator
Operating characteristics WLCA2-LE/LD
WL01CA2-LE/LD
Operating force OF max.
Release force RF min.
Pretravel PT
Overtravel OT min.
Movement Differential MD max.
13.34 N
2.23 N
15° ±5°
30°
12°
28
68.7
13.1
12.9
5
12.5
35
29.2
21.6
OP
PT
* Stainless sintered roller
17.5 dia. (length: 4.6) *
Four, M3.5 (length: 10)
42 max.
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2
+0.2
dia. holes
0
Four, M6
Depth: 15 min.
M12 × 1
±1.2
Direct-wired Connector Models
28
68.7
13.1
12.9
5
35
29.2
21.6
OP
PT
XS2H-D421
SC-1M
* Stainless sintered roller
17.5 dia. (length: 4.6) *
Four, M3.5 (length: 10)
42 max.
30.2
±0.2
40 ±0.7
300 +100
-50
(4.9) (15.1)
58.7 ±0.2
Three, M4
(length: 13)
Four, 5.2
+0.2
dia. holes
0
Four, M6
Depth: 15 min.
6 dia.
(20)
M12 × 1
±1.2
Pre-wired Connector Models
Indicator-equipped Models
25.4
68.7
12.7
25.4
13.1
14.7
5
38R
35
29.2
21.6
* Stainless sintered roller
17.5 dia. (length: 7) *
Four, M3.5
(125)
42 max.
60 max.
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
53 ±1.5
41.5 ±1.5
40 ±1.5
Three, M4
(length: 13)
M5 (length: 12)
Allen-head bolt
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Roller Lever
WLCA2-LE/LD
WL01CA2-LE/LD
35
WL/WLM
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Note: 2. The WL-N high-sensitivity, high-precision models have been integrated into the WL Series. If you are scheduled to use the WL-N high-sensitivity, high-precision
models, order WL models instead.
Spatter-prevention Models
Actuator Roller Lever
Sealed Top-roller
Plunger
Basic Overtravel models High-precision
Operating characteristics
General-purpose
High-sensitivity
Operating force OF max.
Release force RF min.
Pretravel PT
Overtravel OT min.
Movement Differential MD max.
13.34 N
2.23 N
15° ±5°
30°
12°
9.81 N
0.98 N
15° ±5°
55°
12°
9.81 N
0.98 N
10°
65°
7°
13.34 N
1.47 N
5°
40°
3°
16.67 N
4.41 N
1.7 mm max.
5.6 mm
1 mm
Operating Position OP
Total travel Position TTP max.
—
—
—
—
—
—
—
—
44 ±0.8 mm
39.5 mm
* Stainless steel roller
25.4
68.7
12.7
25.4
13.1
14.7
5
Four, M3.5
head clamping screws
35
29.2
21.6
Two, M5 Allen-head nut
and arm set screw
Lamp cover
Fluororesin cap
38R
17.5 dia. (length: 7) *
(125)
42 max.
60 max.
30.2
±0.2
40
±0.7
(4.9) (15.1)
58.7
±0.2
54
±1.5
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Roller Lever (Screw Terminals)
WLCA2-@S/WL01@-@S
WLH2-@S/WLG2-@S
WLGCA2-@S
25.4
68.7
12.7
25.4
13.1
14.7
300 +100
−50
5
35
29.2
21.6
XS2H-D421
SC-1M
* Stainless steel roller
6 dia.
Four, M3.5
head clamping screws
Two, M5 Allen-head nut
and arm set screw
Lamp cover
Fluororesin cap
38R
17.5 dia. (length: 7) *
(20)
42 max.
60 max.
30.2
±0.2
40 ±0.7
53.2 ±0.8
(4.9) (15.1)
58.7 ±0.2
53 ±1.5
41.5 ±1.5
40 ±1.5
Three, M4
(length: 13)
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Roller Lever (Pre-wired connectors)
WLCA2-@S-M1J*/WL01@-@S-M1J*
WLH2-@S-M1J*/WLG2-@S-M1J*
WLGCA2-@S-M1J*
* External dimensions are the same even for different core
wires.
24
68.7
12.9
13.1
OP
PT
5
11.2 dia. (length: 5) *
35
29.2
21.6
* Stainless steel roller
Four, M3.5
Lamp cover
42 max.
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2
Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Sealed Top-roller Plunger (Screw Terminals)
WLD28-@S
68.7
13.1
12.9
5
Four, M3.5 (length: 10)
Mounting bushing
Tightening screws
and spring washers
35
29.2
21.6
OP
PT
XS2H-D421
SC-1M
Rubber cap
(Fluorosilicone)
300 +100
−50
* Stainless steel roller
6 dia.
Lamp cover
11.2 dia. (length: 5) *
(20)
42 max.
30.2
±0.2
40 ±0.7
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Sealed Top-roller Plunger (Pre-wired connectors)
WLD28-@S-M1J*
* External dimensions are the same even for different core wires.
+2°
–1°
+2°
0°
WL/WLM
36
Rotating Lever Models
Long-life Models
Model
Operating characteristics
WLMCA2-LD@
Basic models
WLMH2-LD
@
General-purpose
overtravel models
WLMG2-LD
@
High-sensitivity overtravel
models
WLMGCA2-LD
@
High-precision models
Operating force OF max.
Release force RF min.
Pretravel PT
Overtravel OT min.
Movement Differential MD max.
9.81 N
0.98 N
15° ±5°
30°
12°
9.81 N
0.98 N
15° ±5°
55°
12°
9.81 N
0.98 N
10°
65°
7°
13.34 N
1.47 N
5°
40°
3°
M5 (length: 12)
Allen-head bolt
60 max.
25.4
68.7
12.7
25.4
13.1
14.7
5
38R
Four, M3.5
(length: 26.5)
35
29.2
21.6
Rubber cap
17.5 dia. (length: 7) *
* Stainless sintered roller
Lamp cover
42 max.
30.2
±0.2
40 ±0.7
53.2 ±0.8
40 ±1.5
53 ±1.5
41.5 ±1.5
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Roller Lever (Screw Terminals)
WLM@-LD
25.4
68.7
12.7
25.4
13.1
14.7
5
12.5
35
29.2
21.6
SC-2FD
M12 x 1
M5 (length: 12)
Allen-head bolt
60 max.
38R
Four, M3.5
(length: 26.5)
Rubber cap
17.5 dia. (length: 7) *
* Stainless sintered roller
Lamp cover
42 max.
30.2
±0.2
40 ±0.7
53.2 ±0.8
40 ±1.5
53 ±1.5
41.5 ±1.5
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
JIS B0202 G½
Effective thread:
4 threads min.
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Roller Lever (Direct-wired Connectors)
WLM@-LD@
25.4
68.7
12.7
25.4
13.1
14.7
5
35
29.2
21.6
XS2H-D421
44.7
M5 (length: 12)
Allen-head bolt
60 max.
38R
Four, M3.5
(length: 26.5)
Rubber cap
17.5 dia. (length: 7) *
* Stainless sintered roller
6 dia.
(20)
Lamp cover
42 max.
30.2
±0.2
40 ±0.7
300 ±50
53.2 ±0.8
40 ±1.5
53 ±1.5
41.5 ±1.5
(4.9) (15.1)
58.7 ±0.2 Three, M4
(length: 13)
Four, 5.2+0.2
dia. holes 0
Four, M6
Depth: 15 min.
±1.2
Roller Lever (Pre-wired Connectors)
WLM@-LD@
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all
dimensions.
Note: 2. The WL-N high-sensitivity, high-precision models have been integrated
into the WL Series. If you are scheduled to use the WL-N high-
sensitivity, high-precision models, order WL models instead.
+2°
–1°
+2°
0°
37
WL/WLM
Actuators (Levers Only)
Lever: Only rotating lever models are illustrated.
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
11.4
17.5 dia. (length: 7)
stainless sintered roller
7.3-dia.
mounting
holes 38
16 M5
Allen-head bolt
54.8
17.9
12.6
WL-1A100
Standard Lever
11.4
38
16
54.8
17.9
12.6
17.5 dia. (length: 7)
resin roller
7.3-dia.
mounting
holes
M5
Allen-head bolt
WL-1A115
Resin Roller
11.4
38
16
54.8
16.9
12.1
17 dia. (length: 6)
bearing roller
7.3-dia.
mounting
holes
M5
Allen-head bolt
WL-1A400
Bearing Roller
11.4
16
54.8
40.2
±0.8
23.6
R38
17.5 dia. (length: 30)
Nylon roller
7.3-dia.
mounting
holes M5
Allen-head bolt
WL-1A118
Nylon Roller:
Roller Width: 30 mm
11.4
38
16
54.8
17.9
12.6
17.5 dia. (length: 7)
stainless sintered roller
7.3-dia.
mounting
holes
Two, M5 Allen-
head nut and
arm set screw
WL-1A105
Double Nuts
11.4
38 ±0.2
16
54.8
17.9
12.6
17.5 dia. (length: 7)
stainless steel roller
7.3-dia.
mounting
holes
M5
Allen-head bolt
WL-1A103S
Spatter Prevention
11.4
50
16
66.8
25.7
16.6
17.5 dia. (length: 15)
stainless sintered roller
7.3-dia.
mounting
holes
M5
Allen-head bolt
WL-1A200
Lever Length: 50
Roller Width: 15
11.4
16
79.8
17.9
12.6
63 ±0.3
17.5 dia. (length: 7)
stainless sintered roller
7.3-dia.
mounting
holes
M5
Allen-head bolt
WL-1A300
Lever Length: 63
16
12
Adjustable lever:
stainless steel
Adjustable
range:
25 to 89
105.75
19.7
±0.8
24.9
±0.8
17.5 dia. (length: 7)
stainless sintered roller
7.3-dia.
mounting
holes M5
Allen-head
bolt
WL-2A100
16
12
105.75
Adjustable lever:
stainless steel
Adjustable
range:
25 to 89
19.7
±0.8
24.9
±0.8
17.5 dia. (length: 7)
resin roller
7.3-dia.
mounting
holes
M5
Allen-head
bolt
WL-2A111
Resin Roller
16
12
105.75
23
Adjustable lever:
stainless steel
Adjustable
range:
25 to 89
19.7
±0.8
24.9
±0.8
17.5 dia. (length: 7)
stainless sintered
roller
7.3-dia.
mounting
holes
M5
Allen-head
bolt
T
wo, M5 Allen-head nut
and arm set screw
WL-2A107
Double Nuts
6.2
155.75
23
(15.8)
Adjustable lever:
stainless steel
Adjustable
range:
25 to 140
19.7 ±0.8
24.9 ±0.8
17.5 dia. (length: 7)
resin roller
7.3-dia.
mounting
holes
M5
Allen-head
bolt
WL-2A108
Resin Roller
6.2
155.75
23
(15.8)
Adjustable lever:
stainless steel
Adjustable
range:
25 to 140
19.7
±0.8
24.9
±0.8
17.5 dia. (length: 7)
stainless sintered
roller
7.3-dia.
mounting
holes
M5
Allen-head
bolt
WL-2A122
16
20
105.75
23
9.1
Adjustable lever:
stainless steel
Adjustable
range:
25 to 89
19.7
±0.8
24.9 ±0.8
17.5 dia. (length: 7)
stainless sintered
roller
7.3-dia.
mounting
holes M5
Allen-head
bolt
* Can be installed
on the rear side.
WL-2A106
3
89.5R
20
15.9
22.1
(112)
(21.8)
(10)
(10)
19.5
±0.8
24.7 ±0.8
17.5 dia. (length: 7)
stainless sintered
roller
Two, M5
(length: 16)
Allen-head bolt
7.3 dia.
mounting holes
Three, 5.3
+0.2
dia. holes
0
WL-2A130
16
23
12
Adjustable
from 42 to 89
19.7 ±0.8
24.9
±0.8
50 dia. (length: 6)
Nylon roller
7.3-dia.
mounting
holes
M5
Allen-head
bolt
WL-2A104
WL/WLM
38
Lever: Only rotating lever models are illustrated.
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
2. When using the adjustable roller (rod) lever, make sure that the lever is facing downwards. Use caution, as telegraphing (the Switch turns ON and OFF
repeatedly due to inertia) may occur.
16
34.5
24.4
122 23
Adjustable
from 41 to
78.5
50 dia. (length: 15)
Nylon roller
7.3-dia.
mounting
holes
M5
Allen-head
bolt
WL-2A110
16
34.2
24.2
6
Adjustable
from 41 to
89
49 dia. rubber roller
Material: NBR
7.3-dia.
mounting
holes
M5
Allen-head
bolt
WL-2A105
11.5
16
20.1 ±0.8
38R
50 dia. (length: 6)
Nylon roller
7.3-dia.
mounting
holes
M5
Allen-head
bolt
WL-1A106
M5
Allen-head
bolt 11.5
16
20.1 ±0.8
38R
35 dia. (length: 6)
Nylon roller
7.3+0.1
mounting holes
-dia.
0
WL-1A110
160
9
19
11
Adjustable
from
25 to 140
M5
Allen-head
bolt
7.3-dia. mounting
holes
3-dia. stainless
steel rod
M8
Allen-head
lock screw
WL-4A100
9
13
11
Adjustable
from 270 to
290 M5
Allen-head
bolt
7.3-dia.
mounting
holes
2-dia. stainless
steel for spring
M8
Allen-head
lock screw
WL-4A201
Actuator's
center of
rotation
400
±2
65
±2
12.8
8
7.5
11
6
25.5 max.
13.4
Adjustable
from 350
to 380
M5
Allen-head
bolt
7.3-dia.
mounting
holes
3.2-dia.
stainless
steel rod
WL-3A100
12.8
8
7.5
11
6
Two, M5 Allen-
head nut and
arm set screw
13.4
400
±2
65
±2
25.5 max.
Adjustable
from 350
to 380
7.3-dia.
mounting
holes
3.2-dia.
stainless
steel rod
WL-3A106
Double Nut
680
12.8
7.5
11
6
M5
Allen-head
bolt
13.4
8 ±0.4
65 ±2
25.5 max.
Adjustable
from 650
to 660
7.3-dia.
mounting
holes
3.2-dia.
stainless
steel rod
WL-3A108
7.5
7.5
11
6
13
(95)
M5
Allen-head
bolt
450
±4
417.5
±2
24.6 max.
7.3-dia.
mounting
holes
2.3-dia.
operation rod
12.5 dia. max.
WL-3A200
7.5
11
6
13
50
(95)
M5
Allen-head
bolt
470 ±4
437.5 ±2
24.6 max.
7.3-dia.
mounting
holes
2.3-dia.
operation
rod
12.5
dia.
max.
8 dia.
Adhesive
Cap
WL-3A203
160
9
19
11
M5
Allen-head
bolt
7.3-dia.
mounting holes
Adjustable
up to 141
4-dia. stainless
steel rod
M8
Allen-head
lock screw
WL-4A112
15.8
3
10
10
11.3
20
15.9
22.1
84
95.3
Marking 8R
(108)
(18.5)
Two,M5
(length: 16)
Allen-head bolts
7.3+0.1
mounting
holes
dia.
0
Three, 5.3+0.2
dia. holes 0
WL-2A129
WL-5A100 has a plastic roller
11
1.3
6.7 17.7
12.4
54.8
90°
38R
Two, 17.5 dia. (length: 7)
stainless sintered rollers
M5 (length: 16)
Allen-head bolt
7.3 dia.
WL-5A101
11
1.3
17.7
12.4
54.8
6.7
WL-5A102 has a plastic roller
90°
38R
Two, 17.5 dia. (length: 7)
stainless sintered rollers
M5 (length: 16)
Allen-head bolt
7.3 dia.
WL-5A103
11
17.7
12.4
54.8
WL-5A104 has a plastic roller
90°
38R
Two, 17.5 dia. (length: 7)
stainless sintered rollers
M5 (length: 16)
Allen-head bolt
7.3 dia.
WL-5A105
39
WL/WLM
Model Replacement Table (Replacing WL Basic Models with WL-N Basic Models)
Manufacturing of the basic WL models is scheduled to be discontinued. Use the following table to find the corresponding WL-N-series
models and order them instead.
WL WL-N
WLCA2 WLCA2-N
WL01CA2 WLCA2-N
WLH2 WLCA2-N
WL01H2 WLCA2-N
WLCA2-2 WLCA2-2-N
WL01CA2-2 WLCA2-2-N
WLCA2-2N WLCA2-2N-N
WL01CA2-2N WLCA2-2N-N
WLCA2-7 WLCA2-7-N
WL01CA2-7 WLCA2-7-N
WLCA2-8 WLCA2-8-N
WL01CA2-8 WLCA2-8-N
WLCA12 WLCA12-N
WL01CA12 WLCA12-N
WLH12 WLCA12-N
WL01H12 WLCA12-N
WLCA12-2 WLCA12-2-N
WL01CA12-2 WLCA12-2-N
WLCA12-2N WLCA12-2N-N
WL01CA12-2N WLCA12-2N-N
WLCL WLCL-N
WL01CL WLCL-N
WLHL WLCL-2N-N
WL01HL WLCL-2N-N
WLCL-2 WLCL-2-N
WLCL-2N WLCL-2N-N
WL01CL-2N WLCL-2N-N
WLHAL4 WLCAL4-N
WLHAL5 WLCAL5-N
WLCA32-41 WLCA32-41-N
WL01CA32-41 WLCA32-41-N
WLCA32-42 WLCA32-42-N
WLCA32-43 WLCA32-43-N
WL01CA32-43 WLCA32-43-N
WLCA32-44 WLCA32-44-N
WL01CA32-44 WLCA32-44-N
WLD WLD18-N
WL01D WLD18-N
WLD2 WLD28-N
WL01D2 WLD28-N
WLD3 WLD38-N
WL01D3 WLD38-N
WLD28 WLD28-N
WL01D28 WLD28-N
WLSD WLSD-N
WL01SD WLSD-N
WLSD2 WLSD2-N
WL01SD2 WLSD2-N
WLSD3 WLSD3-N
WL01SD3 WLSD3-N
WLNJ WLNJ-N
WL01NJ WLNJ-N
WLNJ-30 WLNJ-30-N
WL01NJ-30 WLNJ-30-N
WLNJ-2 WLNJ-2-N
WL01NJ-2 WLNJ-2-N
WLNJ-S2 WLNJ-S2-N
WL01NJ-S2 WLNJ-S2-N
WLCA2-LE WLCA2-LE-N
WLCA2-LD WLCA2-LD-N
WLH2-LE WLCA2-LE-N
WLH2-LD WLCA2-LD-N
WLCA2-2LE WLCA2-2LE-N
WLCA2-2LD WLCA2-2LD-N
WLCA2-2NLE WLCA2-2NLE-N
WLCA2-2NLD WLCA2-2NLD-N
WLCA2-7LE WLCA2-7LE-N
WLCA2-7LD WLCA2-7LD-N
WLCA2-8LE WLCA2-8LE-N
WLCA2-8LD WLCA2-8LD-N
WLCA12-LE WLCA12-LE-N
WLCA12-LD WLCA12-LD-N
WLH12-LE WLCA12-LE-N
WLH12-LD WLCA12-LD-N
WLCA12-2LE WLCA12-2LE-N
WLCA12-2LD WLCA12-2LD-N
WLCA12-2NLE WLCA12-2NLE-N
WLCA12-2NLD WLCA12-2NLD-N
WLCL-LE WLCL-LE-N
WLCL-LD WLCL-LD-N
WLHL-LE WLCL-2NLE-N
WLHL-LD WLCL-2NLD-N
WLCL-2LE WLCL-2LE-N
WLCL-2LD WLCL-2LD-N
WLCL-2NLE WLCL-2NLE-N
WLCL-2NLD WLCL-2NLD-N
WLHAL4-LE WLCAL4-LE-N
WLHAL4-LD WLCAL4-LD-N
WLHAL5-LE WLCAL5-LE-N
WLHAL5-LD WLCAL5-LD-N
WLCA32-41LE WLCA32-41LE-N
WLCA32-41LD WLCA32-41LD-N
WLCA32-42LE WLCA32-42LE-N
WLCA32-43LE WLCA32-43LE-N
WLCA32-43LD WLCA32-43LD-N
WLD-LE WLD18-LE-N
WLD-LD WLD18-LD-N
WLD2-LE WLD28-LE-N
WLD2-LD WLD28-LD-N
WLD3-LE WLD38-LE-N
WL WL-N
WLD3-LD WLD38-LD-N
WLD28-LE WLD28-LE-N
WLD28-LD WLD28-LD-N
WLSD-LE WLSD-LE-N
WLSD-LD WLSD-LD-N
WLSD2-LE WLSD2-LE-N
WLSD2-LD WLSD2-LD-N
WLSD3-LE WLSD3-LE-N
WLSD3-LD WLSD3-LD-N
WLNJ-LE WLNJ-LE-N
WLNJ-LD WLNJ-LD-N
WLNJ-30LE WLNJ-30LE-N
WLNJ-30LD WLNJ-30LD-N
WLNJ-2LE WLNJ-2LE-N
WLNJ-2LD WLNJ-2LD-N
WLNJ-S2LE WLNJ-S2LE-N
WLNJ-S2LD WLNJ-S2LD-N
WLCA2-LDK13 WLCA2-LDK13-N
WLCA2-55LDK13 WLCA2-55LDK13-N
WLCA2-LDK43 WLCA2-LDK43-N
WLCA2-55LDK43 WLCA2-55LDK43-N
WLD2-LDK13 WLD28-LDK13-N
WLD2-55LDK13 WLD28-55LDK13-N
WLD2-LDK43 WLD28-LDK43-N
WLD2-55LDK43 WLD28-55LDK43-N
WLH2-LDK13 WLCA2-LDK13-N
WLH2-55LDK13 WLCA2-55LDK13-N
WLH2-LDK43 WLCA2-LDK43-N
WLH2-55LDK43 WLCA2-55LDK43-N
WLCA2-55LD-M1J WLCA2-55LD-M1J-N
WLCA2-LD-M1GJ WLCA2-LD-M1GJ-N
WLCA2-55LD-M1GJ
WLCA2-55LD-M1GJ-N
WLCA2-55LD-M1JB
WLCA2-55LD-M1JB-N
WLCA2-LD-DGJ03 WLCA2-LD-DGJ-N
WLCA2-55LD-DGJ03 WLCA2-55LD-DGJ-N
WLCA2-LD-DK1EJ03 WLCA2-LD-DK1EJ-N
WLCA2-55LD-DK1EJ03 WLCA2-55LD-DK1EJ-N
WLD2-LD-M1J WLD28-LD-M1J-N
WLD2-55LD-M1J WLD28-55LD-M1J-N
WLD2-LD-M1GJ WLD28-LD-M1GJ-N
WLD2-55LD-M1GJ
WLD28-55LD-M1GJ-N
WLD2-55LD-M1JB
WLD28-55LD-M1JB-N
WLD2-LD-DGJ03 WLD28-LD-DGJ-N
WLD2-LD-DK1EJ03 WLD28-LD-DK1EJ-N
WLD2-55LD-DK1EJ03
WLD28-55LD-DK1EJ-N
WLH2-LD-M1J WLCA2-LD-M1J-N
WLH2-LD-M1GJ WLCA2-LD-M1GJ-N
WLH2-LD-DGJ03 WLCA2-LD-DGJ-N
WLCA2-55 WLCA2-55-N
WLCA2-55LD WLCA2-55LD-N
WL WL-N
WL/WLM
40
WLCA2-55LE WLCA2-55LE-N
WLCA2-139 WLCA2-139-N
WLCA2-139LD2 WLCA2-139LD2-N
WLCA2-139LD3 WLCA2-139LD3-N
WLCA2-140 WLCA2-140-N
WLCA2-141 WLCA2-141-N
WLCA2-141LD2 WLCA2-141LD2-N
WLCA2-141LD3 WLCA2-141LD3-N
WLCA2-RP60 WLCA2-RP60-N
WLCA2-RP60LD2 WLCA2-RP60LD2-N
WLCA2-RP60LD3 WLCA2-RP60LD3-N
WLCA2-TH WLCA2-TH-N
WLCA2-TC WLCA2-TC-N
WLCA2-RP WLCA2-RP-N
WLCA2-P1 WLCA2-P1-N
WLH2-55 WLCA2-55-N
WLH2-55LD WLCA2-55LD-N
WLH2-55LE WLCA2-55LE-N
WLH2-139 WLCA2-139-N
WLH2-140 WLCA2-140-N
WLH2-141 WLCA2-141-N
WLH2-141LD3 WLCA2-141LD3-N
WLH2-RP60 WLCA2-RP60-N
WLH2-RP60LD3 WLCA2-RP60LD3-N
WLH2-TH WLCA2-TH-N
WLH2-TC WLCA2-TC-N
WLH2-RP WLCA2-RP-N
WLH2-P1 WLCA2-P1-N
WLCA2-255 WLCA2-255-N
WLCA2-255LD WLCA2-255LD-N
WLCA2-255LE WLCA2-255LE-N
WLCA2-2139 WLCA2-2139-N
WLCA2-2139LD2 WLCA2-2139LD2-N
WLCA2-2139LD3 WLCA2-2139LD3-N
WLCA2-2RP60 WLCA2-2RP60-N
WLCA2-2RP60LD2 WLCA2-2RP60LD2-N
WLCA2-2RP60LD3 WLCA2-2RP60LD3-N
WLCA2-2TH WLCA2-2TH-N
WLCA2-2TC WLCA2-2TC-N
WLCA2-2N55 WLCA2-2N55-N
WLCA2-2N55LD WLCA2-2N55LD-N
WLCA2-2N55LE WLCA2-2N55LE-N
WLCA2-2N139 WLCA2-2N139-N
WLCA2-2N140 WLCA2-2N140-N
WLCA2-2NTH WLCA2-2NTH-N
WLCA2-2NTC WLCA2-2NTC-N
WLCA12-55 WLCA12-55-N
WLCA12-55LD WLCA12-55LD-N
WLCA12-55LE WLCA12-55LE-N
WLCA12-139 WLCA12-139-N
WLCA12-140 WLCA12-140-N
WLCA12-141 WLCA12-141-N
WL WL-N
WLCA12-RP60 WLCA12-RP60-N
WLCA12-TH WLCA12-TH-N
WLCA12-TC WLCA12-TC-N
WLCA12-RP WLCA12-RP-N
WLCA12-P1 WLCA12-P1-N
WLH12-TH WLCA12-TH-N
WLH12-TC WLCA12-TC-N
WLH12-RP WLCA12-RP-N
WLH12-P1 WLCA12-P1-N
WLCA12-2TH WLCA12-2TH-N
WLCA12-2TC WLCA12-2TC-N
WLCA12-2NTH WLCA12-2NTH-N
WLCA12-2NTC WLCA12-2NTC-N
WLCL-55 WLCL-55-N
WLCL-55LD WLCL-55LD-N
WLCL-139 WLCL-139-N
WLCL-140 WLCL-140-N
WLCL-RP60 WLCL-RP60-N
WLCL-TH WLCL-TH-N
WLCL-TC WLCL-TC-N
WLCL-RP WLCL-RP-N
WLCL-P1 WLCL-P1-N
WLHL-TH WLCL-2NTH-N
WLHL-TC WLCL-2NTC-N
WLHL-RP WLCL-2NRP-N
WLHL-P1 WLCL-2NP1-N
WLGL-TH WLGL-TH-N
WLCL-2TH WLCL-2TH-N
WLCL-2TC WLCL-2TC-N
WLCL-2RP WLCL-2RP-N
WLCL-2NTH WLCL-2NTH-N
WLCL-2NTC WLCL-2NTC-N
WLD2-55 WLD28-55-N
WLD2-55LD WLD28-55LD-N
WLD2-55LE WLD28-55LE-N
WLD2-139 WLD28-139-N
WLD2-RP60 WLD28-RP60-N
WLD2-TH WLD28-TH-N
WLD2-TC WLD28-TC-N
WLD2-RP WLD28-RP-N
WLD28-55 WLD28-55-N
WLD28-55LD WLD28-55LD-N
WLD28-55LE WLD28-55LE-N
WLD28-139 WLD28-139-N
WLD28-140 WLD28-140-N
WLD28-RP60 WLD28-RP60-N
WLD28-TH WLD28-TH-N
WLD28-RP WLD28-RP-N
WLSD-55 WLSD-55-N
WLSD-55LD WLSD-55LD-N
WLSD-139 WLSD-139-N
WLSD-RP60 WLSD-RP60-N
WL WL-N
WLSD-TH WLSD-TH-N
WLSD-TC WLSD-TC-N
WLSD-RP WLSD-RP-N
WLSD2-55 WLSD2-55-N
WLSD2-55LD WLSD2-55LD-N
WLSD2-139 WLSD2-139-N
WLSD2-140 WLSD2-140-N
WLSD2-RP60 WLSD2-RP60-N
WLSD2-TH WLSD2-TH-N
WLSD2-TC WLSD2-TC-N
WLSD2-RP WLSD2-RP-N
WLNJ-55 WLNJ-55-N
WLNJ-55LD WLNJ-55LD-N
WLNJ-139 WLNJ-139-N
WLNJ-140 WLNJ-140-N
WLNJ-RP60 WLNJ-RP60-N
WLNJ-TH WLNJ-TH-N
WLNJ-TC WLNJ-TC-N
WLNJ-RP WLNJ-RP-N
WLNJ-255 WLNJ-255-N
WLNJ-255LD WLNJ-255LD-N
WLNJ-2140 WLNJ-2140-N
WLNJ-2RP60 WLNJ-2RP60-N
WLNJ-2RP WLNJ-2RP-N
WLCA2-LEAS WLCA2-LEAS-N
WLH2-LEAS WLCA2-LEAS-N
WLCA2-LDAS WLCA2-LDAS-N
WLH2-LDAS WLCA2-LDAS-N
WLCA2-LES WLCA2-LES-N
WLH2-LES WLCA2-LES-N
WLCA2-LDS WLCA2-LDS-N
WLH2-LDS WLCA2-LDS-N
WLD28-LES WLD28-LES-N
WLD28-LDS WLD28-LDS-N
WLMCA2-LD WLMCA2-LD-N
WLMCA2-LDK13A WLMCA2-LDK13A-N
WLMCA2-LDK13 WLMCA2-LDK13-N
WLMCA2-LDK43A WLMCA2-LDK43A-N
WLMCA2-LDK43 WLMCA2-LDK43-N
WLMCA2-LD-M1J WLMCA2-LD-M1J-N
WLMCA2-LD-DGJ03 WLMCA2-LD-DGJ-N
WLMH2-LD WLMCA2-LD-N
WLMH2-LDK13A WLMCA2-LDK13A-N
WLMH2-LDK13 WLMCA2-LDK13-N
WLMH2-LDK43A WLMCA2-LDK43A-N
WLMH2-LDK43 WLMCA2-LDK43-N
WLMH2-LD-M1J WLMCA2-LD-M1J-N
WLMH2-LD-DGJ03 WLMCA2-LD-DGJ-N
WLRCA2 WLRCA2-N
WLRH2 WLRCA2-N
WLRCA2-2 WLRCA2-2-N
WLRCA2-2N WLRCA2-2N-N
WL WL-N
41
WL/WLM
WLRCA2 WLRCA2-N
WLRH2 WLRCA2-N
WLRCA2-2 WLRCA2-2-N
WLRCA2-2N WLRCA2-2N-N
WLRCL WLRCA2-N
WLRCA2-2 WLRCA2-2-N
WLRCA2-2N WLRCA2-2N-N
WLRCA32 WLRCA32-N
WLRCA2-LDS WLRCA2-LDS-N
WLRH2-LES WLRCA2-LES-N
WLRH2-LDS WLRCA2-LDS-N
WL WL-N
WL/WLM
42
Model Replacement Table (Replacing WL-N High-sensitivity and High-precision Models
with WL High-sensitivity and High-precision Models)
The WL-N high-sensitivity and high-precision models have been integrated into the WL Series. To use a WL-N high-sensitivity or high-
precision model, find the corresponding WL high-sensitivity or high-precision model in the following model replacement table, and order
the switch with the WL model number. Refer to the WL catalog for detailed information on WL high-sensitivity and high-precision models.
WL-N WL
WLG2-TH-N
WL01G2-TH-F
WLG2-TH-F
WLG2-TH
WLG2-N WL01G2
WLG2
WLG2-LDS-N WL01G2-LDS
WLG2-LDS
WLG2-LD-N WL01G2-LD
WLG2-LD
WLG2-LD-M1J-N WL01G2-LD-M1J
WLG2-LD-M1J
WLG2-LD-M1JB-N WLG2-LD-M1JB 0.3M
WLG2-LD-M1GJ-N WLG2-LD-M1GJ 0.3M
WLG2-LD-DGJ-N WL01G2-LD-DGJ03
WLG2-LD-DGJ03
WLG12-TH-N WL01G12-TH
WLG12-TH
WLG12-N WL01G12
WLG12
WLRG2-N WLR01G2
WLRG2
WLRG2-LDS-N WLRG2-LDS
WLMGCA2-LD-N WLMGCA2-LD
WLMGCA2-LD-M1J-N WLMGCA2-LD-M1J
WLMGCA2-LDK43-N WLMGCA2-LDK43
WLMGCA2-LDK13-N WLMGCA2-LDK13
WLMGCA2-LDK13A-N
WLMGCA2-LDK13A
WLMG2-LD-N WLMG2-LD
WLMG2-LD-M1J-N WLMG2-LD-M1J
WLMG2-LDK43-N WLMG2-LDK43
WLMG2-LDK13-N WLMG2-LDK13
WLMG2-LDK13A-N WLMG2-LDK13A
WLMG2-LD-DGJ-N WLMG2-LD-DGJ03
WLGL-TH-N WLGL-TH
WLGL-TC-N WLGL-TC
WLGL-P1-N WLGL-P1
WLGL-N WL01GL
WLGL
WLGL-LE-N WLGL-LE
WLGL-LD-N WLGL-LD
WLGCA2-TH-N
WL01GCA2-TH
WLGCA2-2TH
WLGCA2-TH
WLGCA2-TC-N WLGCA2-TC
WLGCA2-RP-N WLGCA2-RP
WLGCA2-RP60-N 5M WLGCA2-RP60
WLGCA2-RP60LD3-N
5M WLGCA2-RP60LD3
WLGCA2-RP60LD2-N
5M WLGCA2-RP60LD2
WLGCA2-N WL01GCA2
WLGCA2
WLGCA2-LES-N WLGCA2-LES
WLGCA2-LE-N WL01GCA2-LE
WLGCA2-LE
WLGCA2-LDS-N WLGCA2-LDS
WLGCA2-LDS-M1J-1-N
WLGCA2-LDS-M1J-1
WLGCA2-LDS-M1GJ-1-N
WLGCA2-LDS-M1GJ-1
WLGCA2-LD-N WL01GCA2-LD
WLGCA2-LD
WLGCA2-LD-M1J-N WLGCA2-LD-M1J
WLGCA2-LD-M1GJ-N WLGCA2-LD-M1GJ
0.3M
WLGCA2-LDK43-N WL01GCA2-LDK43
WLGCA2-LDK43
WLGCA2-LDK13-N WLGCA2-LDK13
WLGCA2-LD-DGJ-N WLGCA2-LD-DGJ03
WLGCA2-55-N WLGCA2-55
WLGCA2-55LE-N WLGCA2-55LE
WLGCA2-55LD-N WL01GCA2-55LD
WLGCA2-55LD
WLGCA2-55LD-M1J-N
WLGCA2-55LD-M1J
0.3M
WLGCA2-55LD-M1JB-N
WLGCA2-55LD-M1JB
0.3M
WLGCA2-55LD-M1GJ-N
WLGCA2-55LD-M1GJ
0.3M
WLGCA2-55LDK43-N WL01GCA2-55LDK43
WLGCA2-55LDK43
WLGCA2-55LDK13-N
WL01GCA2-55LDK13
WLGCA2-55LDK13
WLGCA2-55LDK13CE
WLGCA2-55LD-DGJ-N
WLGCA2-55LD-DGJ03
WLGCA2-139-N 5M WLGCA2-139 5M
WLGCA2-139-N 3M WLGCA2-139 3M
WLGCA2-139-N 2M WLGCA2-139 2M
WLGCA2-
139LD3-N 5M
WLGCA2-
1395LD3 S-FLEX 5M
WLGCA2-139LD3-N 5M
WLGCA2-139LD3 5M
WLGCA2-139LD2-N 5M
WLGCA2-139LD2 5M
WLG2-TC-N WLG2-TC
WLG2-RP-N WLG2-RP
WLG2-RP60-N 5M WLG2-RP60
WLG2-RP60-N 10M WLG2-RP60 10M
WLG2-RP60LD3-N 5M
WLG2-RP60LD3
WLG2-RP60LD2-N 5M
WLG2-RP60LD2
WLG2-P1-N WLG2-P1
WLG2-LES-N WLG2-LES
WLG2-LE-N WL01G2-LE
WLG2-LE
WLG2-LEAS-N WLG2-LEAS
WLG2-LDK43-N WLG2-LDK43
WLG2-LDK13-N WL01G2-LDK13
WLG2-LDK13
WLG2-LD-DK1EJ-N WLG2-LD-DK1EJ03
WLG2-LDAS-N WLG2-LDAS
WL-N WL
WLG2-55-N WL01G2-55
WLG2-55
WLG2-55LE-N WLG2-55LE
WLG2-55LD-N WL01G2-55LD
WLG2-55LD
WLG2-55LD-M1TJ-N WLG2-55LD-M1TJ
WLG2-55LD-M1TJB-N
WLG2-55LD-M1TJB
WLG2-55LD-M1JB-N WLG2-55LD-M1JB
WLG2-55LD-M1GJ-N WLG2-55LD-M1GJ
0.3M
WLG2-55LDK43-N WL01G2-55LDK43
WLG2-55LDK43
WLG2-55LDK13-N
WL01G2-55LDK13
WLG2-55LDK13
WLG2-55LDK13CE
WLG2-55LD-DTK1EJ-N WLG2-55LD-DTK1EJ03
WLG2-55LD-DK1EJ-N
WLG2-55LD-DK1EJ03
WLG2-55LD-DGJ-N
WL01G2-55LD-DGJ03
WLG2-55LD-DGJ03
WLG2-141-N 5M WLG2-141 5M
WLG2-141-N 2M WLG2-141 2M
WLG2-141LD3-N 5M WL01G2-141LD3 5M
WLG2-141LD3 5M
WLG2-141LD2-N 5M WLG2-141LD2 5M
WLG2-140-N 5M WLG2-140 5M
WLG2-139-N 5M WLG2-139 5M
WLG2-139-N 3M WLG2-139 3M
WLG2-139LD3-N 5M WLG2-139LD3 5M
WLG12-TC-N WLG12-TC
WLG12-P1-N WLG12-P1
WLG12-LE-N WLG12-LE
WLG12-LD-N WLG12-LD
WL-2H4100-N
(FOR WLGL-N) ---
WL-2H2100-N
(FOR WLG12-N) ---
WL-2H1100W-N
(FOR WLG2-141-N) ---
WL-2H1100S-N
(FOR WLG2-S-N) ---
WL-2H1100-N
(FOR WLG2-N) ---
WL-N WL
43
WL/WLM
Safety Precautions
Refer to Safety Precautions for All Limit Switches.
•When a rod or wired-type actuator is used, do not touch the top end
of the actuator. Doing so may result in injury.
(Applicable models)
WLHAL5 and WL01HAL5 Rod Spring Levers and WLNJ-S2 and
WL01NJ-S2 Steel-wire Actuators.
•A short-circuit may cause damage to the Switch, so insert a circuit
breaker fuse, of 1.5 to 2 times the rated current, in series with the
Switch.
•In order to meet EN approval ratings, use a 10-A fuse that
corresponds to IEC60269, either a gI or gG for general-purpose
types and spatter-prevention models only.
•When wiring terminal screws, use M4 round crimp terminals and
tighten screws to the recommended torque. Wiring with bare wires,
or incorrect crimp terminals, or not tightening screws to the
recommended torque can lead to short-circuits, leakage current,
and fire.
•When performing internal wiring there is a chance of short-circuit,
leakage current, or fire, so be sure to protect the inside of the
Switch from splashes of oil or water, corrosive gases, and cutting
powder.
•Using an inappropriate connector or assembling Switches
incorrectly (assembly, tightening torque) can result in malfunction,
leakage current, or fire, so be sure to read the instruction manual
thoroughly beforehand.
•Even when the connector is assembled and set correctly, the end
of the cable and the inside of the Switch may come in contact. This
can lead to malfunction, leakage current, or fire, so be sure to
protect the end of the cable from splashes of oil or water and
corrosive gases.
Operating Environment
•Seal material may deteriorate if a Switch is used outdoor or where
subject to special cutting oils, solvents, or chemicals. Always
appraise performance under actual application conditions and set
suitable maintenance and replacement periods.
•Install Switches where they will not be directly subject to cutting
chips, dust, or dirt. The Actuator and Switch must also be protected
from the accumulation of cutting chips or sludge.
•Constantly subjecting a Switch to vibration or shock can result in
wear, which can lead to contact interference with contacts,
operation failure, reduced durability, and other problems.
Excessive vibration or shock can lead to false contact operation or
damage. Install Switches in locations not subject to shock and
vibration and in orientations that will not produce resonance.
•The Switches have physical contacts. Using them in environments
containing silicon gas will result in the formation of silicon oxide
(SiO2) due to arc energy. If silicon oxide accumulates on the
contacts, contact interference can occur. If silicon oil, silicon filling
agents, silicon cables, or other silicon products are present near the
Switch, suppress arcing with contact protective circuits (surge
killers) or remove the source of silicon gas.
Using Switches for Micro Loads
Contact faults may occur if a Switch for a general-load is used to
switch a micro load circuit. Use switches in the ranges shown in the
diagram below. However, even when using micro load models within
the operating range shown here, if inrush current occurs when the
contact is opened or closed, it may increase contact wear and so
decrease durability. Therefore, insert a contact protection circuit
where necessary. The minimum applicable load is the N-level
reference value. This value indicates the malfunction reference level
for the reliability level of 60% (λ60).
The equation, λ60 = 0.5 × 10–6/operations indicates that the estimated
malfunction rate is less than 1/2,000,000 operations with a reliability
level of 60%.
Precautions for Safe Use
Precautions for Correct Use
Not Suitable Suitable
30
24
12
5
0
1 10 100 1,0000.1
1 mA
Operating range
for micro-load
models
26 mA0.16 mA
800 mW5 mW
100 mA 160 mA
Unusable
range
Voltage (V)
Current (mA)
Operating range
for standard
models
WL/WLM
44
Built-in Switch
Do not remove or replace the built-in switch. If the position of the built-
in switch moves, it can cause reduced performance, and if the
insulation sheet moves (separator), the insulation may become
ineffective.
Tightening Torque
•If screws are too loose they can lead to an early malfunction of the
Switch, so ensure that all screws are tightened using the correct
torque.
•In particular, when changing the direction of the Head, make sure
that all screws are tightened again to the correct torque. Do not
allow foreign objects to fall into the Switch.
Installing the Switch
To install the Switch, make a mounting panel, as shown in the
following diagram, and tighten screws using the correct torque.
Mounting
Mounting
Connectors
Either the easy-to-use Allen-head nut or the SC Connector can be
used as connectors. To ensure high-sealing properties, use the SC
Connector. Refer to Limit Switch Connectors for details on SC
Connectors.
Wiring
•Use 1.25-mm2 lead wires and M4-insulation covered crimp
terminals for wiring.
•The ground terminal is only installed on models with ground
terminals.
Rotating Lever Set Position (General-purpose or Spatter-
prevention Switches Only)
All rotating lever models, except the fork lever lock models, have a set
position marker plate. (See page 23.) After operation, set the indicator
needle on the marker plate so that is in the convex section of the
bearing.
Operation Set Position (Long-life Switches Only)
For all Long-life Switching, there is a set position marker slit on the
rubber cap of the head. After operation, set the slit on the rubber cap
so that the fluorescent color on the shaft section can be seen.
Terminal Plate
By using a short circuit plate, as shown in the following diagram, the
Switch can be fabricated into a single-polarity double-break switch.
When ordering, specify WL Terminal Plate (product code: WL-
9662F).
Indicator
Indicator-equipped switch has contacts and indicator in parallel.
When contacts are open, leakage current flows through the indicator
circuit and may cause load's malfunction.
Please check the load's OFF current before use the indicator-
equipped switch.
WL Mounting
locations
Front Mountig/
Rear Mountig
In case of side mounting for
overtravel,90° WL@-@@2N Mounting
locations
Side Mountig
3.
4.
2.
1.
6.
5.
No. Type Appropriate
tightening
torque
1. Head mounting
screw 0.78 to 0.88 N·m
2. Cover mounting
screw 1.18 to 1.37 N·m
3.
Allen-head bolt
(for securing the
lever)
4.90 to 5.88 N·m
4. Terminal screw 0.59 to 0.78 N·m
5. Connector 1.77 to 2.16 N·m
Four, 5.2
58.7 ±0.15
30.2 ±0.15
+0.2 dia. holes
0
Four, 6.2+0.2 dia. holes
0
or M5 tapped holes
Front Mountig :
Rear Mountig :
Two, 5.2
64 ±0.15
23 ±0.15
+0.2 dia. holes
0
L
lF
B
D dia.
dz dia.
dz dia. : 4.3
D dia. : 4.5
B : 8.5
L : 21.0
F : 7.8
l : 9.0 (mm)
Ground terminal
NO terminal
NC terminal
Wiring Method
Switch Box Section
Crimp Terminal External
Dimensions
9
2.1R 3.5
72R
3R
7.1
COM
t = 0.6 Brass plate
4.2
+0.1
0
2.5
+0.2
0
16
±0.15
9
±0.2
23
±0.4
45
WL/WLM
Using the Switches
Item Applicable models and Actuators Details
Changing the Installation Position
of the Actuator
By loosening the Allen-head bolt on the
actuator lever, the position of the actua-
tor can be set anywhere within the 360
°
.
With Indicator-equipped Switches, the
actuator lever comes in contact with the
top of the indicator cover, so use caution
when rotating and setting the lever.
When the lever only moves forwards and
backwards, it will not contact the lamp
cover (except for long-life models).
Roller Levers:
WLCA2, WL01CA2, WLCA2-2,
WL01CA2-2, WLH2,WL01H2, WLG2,
WL01G2, WLMCA2@, WLMH2@,
WLMG2@, WLMGCA2@
Adjustable Roller Levers:
WLCA12, WL01CA12, WLCA12-2,
WL01CA12-2, WLH12, WL01H12,
WLG12, WL01G12,
Adjustable Rod Levers:
WLCL, WL01CL, WLCL-2, WL01CL-2,
WLHL, WL01HL, WLGL, WL01GL
Changing the Orientation of the Head
By removing the screws in the four cor-
ners of the Head, the Head can be set
in any of the four directions. Be sure to
change the plunger for internal opera-
tions at the same time. (The operation-
al plunger does not need to be
changed on general-purpose and high-
sensitivity overtravel models.) The roll-
er plunger can be set in either two po-
sitions at 90°.
WLCA2-2N and WL01CA2-2N can be
set only in either the forward or back-
ward direction.
Roller Levers:
WLCA@, WL01CA@, WLCA@-2,
WL01CA@-2, WLGCA@, WLH@,
WL01H@, WLG@, WL01G@,
WLMCA2@, WLMH2@, WLMG2@,
WLMGCA2@
Adjustable Rod Levers:
WLCL, WL01CL, WLCL-2, WL01CL-2
Horizontal Plungers:
WLSD@, WL01SD@
Top-roller Plungers:
WLD2, WL01D2
Sealed Top-roller Plungers:
WLD28, WL01D28
Does not include -RP60 Series or -141
Series.
Changing the Operating Direction
By removing the Head on models
which can operate on one-side only,
and then changing the direction of the
operational plunger, one of three oper-
ating directions can be selected. For
overtravel 90° operation models, one
of three operating directions can be se-
lected by loosening the rubber holder
using either a coin or a flat-blade
screwdriver and changing the direction
of the internal rubber section.
The tightening torque for the screws on
the Head is 0.78 to 0.88 N•m.
Roller Levers:
WLCA2, WL01CA2, WLGCA2,
WLMGCA2@
Adjustable Roller Levers:
WLCA12, WL01CA12
Adjustable Rod Levers:
WLCL, WL01CL
Overtravel Models:
WLCA@-2N, WL01CA@-2N
Loosen the M5 × 12 bolt, set
the actuator's position and then
tighten the bolt again.
Head Head
Loosen the screws.
Loosen the screws.
Operating Operating
Operation in both
directions
OperatingNot operating
Clockwise operation
Operating Not operating
Operational
plunger
Counterclockwise
operation
Operation on both sides
Operates Operates Operates Does not operate
Operation on one side
Does not
operate
Operates
Operation on one side Avoid this combination
One-side Operation for General-purpose and High-precision Switches
Cam Direction Changing Procedure for Overtravel, 90° Operation Switches
Relationship of cam to operation as observed from the rear of Switch
The output of the Switch will be
changed, regardless of which
direction the lever is pushed.
The output of the Switch will
only be changed when the lever
is pushed in one direction.
Loosen the cam holder with a
coin or screwdriver. Take out
the cam from the Switch.
Change the direction of the cam as
required by your intended operation
and then reinstall the cam.
WL/WLM
46
Operation of Fork Lever Locks
The fork lever lock is configured so that the dog pushes the lever to reverse the output and this reversed state is maintained even after
the dog continues on. If the dog then pushes the lever from the opposite direction, the lever will return to its original position.
Item Applicable models and Actuators Details
Installing the Roller on the Inside
By installing the roller lever in the op-
posite direction, the roller can be in-
stalled on the inside. (Set so that
operation can be completed within a
180° level range.)
Roller Levers:
WLCA@, WL01CA@, WLH@, WL-
CA@-2, WL01CA@-2, WLMCA2@,
WLMH2@, WLMG2@, WLMGCA2@,
WLG@, except for the adjustable roller
levers.
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
Selecting the Roller Position
There are four types of fork lever lock
for use depending on the roller posi-
tion.
Fork Lever Locks:
WLCA32-4@, WL01CA32-4@
Note: An explanation of the operation of fork lever locks is provided after
this table.
Adjusting the Length of the Rod or
Lever
The length of the rod or lever can be
adjusted by loosening the Allen-head
bolt.
Adjustable Roller Levers:
WLCA12, WL01CA12 etc.
Adjustable Rod Levers:
WLCL, WL01CL, etc.
WLCA12 etc.
Loosen the
Allen-head bolt.
WLCA32-41 WLCA32-43
WLCA32-42 WLCA32-44
Adjustment range radius:
25 to 89 mm
Loosen this
Allen-head bolt
and adjust the
length of the
lever.
Loosen this
Allen-head bolt
and adjust the
length of the rod.
NC terminal: ON NO terminal: ON NO terminal: ON
Example
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2016
.
10
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2016 All Right Reserved.
