Single Row Terminal Blocks A2, LP2 & CB2 Dimensions Inches (Millimeters) Specifications A2 & LP2 Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375" or 3/8" (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32 zinc-plated philslot Torque Rating: 9 lb-in. A203504 LP201204 Base: Standoffs standard for easy flux washing Distance Between Barriers: 0.32" (8.1mm) Recommended PCB Hole Diameter: 0.076" (1.93mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 3400V (A2 & LP2); 4100V (CB2). Agency Information: UL File E62622, CSA File 47235; IEC Compliance; CE Certified * 30A Rating achieved with a #10 copper wire crimped to a ring terminal.; 20A Rating without ring terminal. CB2 CB20220407 MOUNTING ENDS ONLY BARRIER & MOUNTING ENDS BARRIER ENDS ONLY Poles A Mounting Ctrs. C Length B Pole Ctrs. C Length 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1.13 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 6.38 6.75 7.13 7.50 7.88 8.25 8.63 9.00 9.38 - - 1.56 1.93 2.30 2.68 3.06 3.43 3.81 4.18 4.56 4.93 5.31 5.69 6.06 6.43 6.81 7.18 7.56 7.93 8.31 8.68 9.06 9.43 9.81 - - 0.38 0.75 1.13 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 6.38 6.75 7.13 1.50 7.88 8.25 8.63 9.00 9.38 0.81 1.18 1.56 1.93 2.31 2.68 3.06 3.43 3.81 4.18 4.56 4.93 5.31 5.68 6.06 6.43 6.81 7.18 7.56 7.93 8.31 8.68 9.06 9.43 9.81 A2 & LP2 Single Row Terminal Blocks Part Numbering System Family Terminal Style Base/End A2 - standard barrier 01* - handwired LP2 - low profile barrier 02 - printed circuit 1 - std. base/ mnt. end 03 - non feed-thru 04 - wire wrap tail 06 - handwired 07 - extended pin 08 - printed circuit 09 - 0.250 QC short 10 - 0.187 QC 14 - printed circuit 19 - 0.250 QC long * A2 only. ** Not compatible with 03-stainless steel screws. *** SEMS screws not available with hardware options 2 - std. base/ barrier end on mount 3 - insulator base/mnt. end Poles Screw Options Options 02 to 26 Barrier end Blank-std. screws 02 to 24 Mount end 00 - screws shipped bulk AB* - angle mnt. options (pg 11) A1 to A9 - 0.250 QC B1 to B9 - 0.187 QC DR* - drilled right angle (pg 11) L1 to L6 marking options (pg 25) MP* mounting plates (pg 11) R30 to R75 - right angle bends (pg 11) S1* - solder lug/flat Covers - (pg 26) 03* - stainless steel 04 - brass nickel-plated 07 - steel SEMS*** 4 - insulator base/barrier end 09* - brass SEMS nickel-plated*** 5 - closed base/ mount end CA** - captive screw WR* - wire ready 6 - closed base/ molded mount end Base/End Note: 5 & 6 Styles only available with 03 terminals. Terminal Styles Inches (Millimeters) EATON www.eaton.com 9 A2 & LP2 Single Row Terminal Blocks Screw Options (Bulk ordering part numbers are in parentheses) Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) (JA2-xx-J) (JB2-xx-J) (JC2-xx-J) Contact Eaton for desired configuration. Base/End Options Inches (Millimeters) (not available with covers) 10 EATON www.eaton.com Note: On 1, 3 and 5 bases, Eaton may drill a terminal spacing to be a mount end. There will be no fit/form/function effect of mounting the product A2 & LP2 Single Row Terminal Blocks Mounting Options Inches (Millimeters) Right Angle Bends 07 Terminal Bend Configurations Right angle terminals are offered on the A2 & LP2. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the selected Bend Option Code to the terminal part number. 04 Terminal Bend Configurations Bend Option Code X (minimum) Z Available with insulator base R35 0.01 0.50 Yes R42 0.08 0.43 Yes R46 0.12 0.39 Yes R50 0.16 0.35 No Bend Option Code X (minimum) Z Available with insulator base R53 0.19 0.32 No R35 0.01 0.23 No R66 0.32 0.19 No R42 0.08 0.16 No R75 0.41 0.10 No R46 0.12 0.12 No R50 0.16 0.08 No Dimensions in inches. To convert to millimeters, multiply by 25.4. Dimensions in inches. To convert to millimeters, multiply by 25.4. Drilled Right Angle Angle Brackets Option DR Counterbored holes across mount ends of block enable fastening with two screws at right angles to normal mount position. Option AB Angle brackets enable block to be fastened at right angles to normal mount position. Bulk part number 2AB-J. Mounting Plates Options MP MP Metal inserts with 0.150" dia. hole accept #6 screw. Bulk part number 2MP-J. EATON www.eaton.com 11 CB2 Single Row Terminal Blocks Part Numbering System Family C B Terminal Style Base/End Poles Screw Options Options 01 - handwired 1 - mount end Blank-std. screws 02 - printed circuit 2 - barrier end 02 to 26 on barrier end AB - angle mounting brackets (pg 13) A7 to A9 - 0.250" QC B7 to B9 - 0.187" QC EB - exit back terminals EF - exit front terminals L1 to L6 marking options (pg 25) LT1 to LT6 marking options (pg 25) MP mtg. plates (pg 13) Covers - (pg 26) 2 CB2 - closed back 07 - extended pin 14 - printed circuit Terminal Styles Inches (Millimeters) Screw Options (Bulk ordering part numbers are in parentheses) CB2 Terminal Exit Options Inches (Millimeters) 12 EATON www.eaton.com 02 to 24 on mount end 07 - steel SEMS standard 09 - brass SEMS nickel-plated CB2 Single Row Terminal Blocks Hardware Options Inches (Millimeters) (Bulk ordering part numbers are in parentheses) Contact Eaton for desired configuration. Mounting Options Inches (Millimeters) Right Angle Mounting Bracket Option AB Mounts blocks on PC boards at a right angle. * Protects solder joints. * Bracket snaps securely on block (no hardware required). * Minimum strip length (end positions are usable). * Mount with #6-32 or #8-32 screws (not supplied). * Available on 3 pole configurations and greater Mounting Plates Option MP MP Metal inserts with 0.150" dia. hole accept #6 screw. Bulk part number 2MP-J. EATON www.eaton.com 13 Single Row Terminal Blocks Effective December 2017 Contact Us Tools Sales and Customer Service Eaton's Electronics Product Selection Tools Americas Email: elx.americas@eaton.com Europe, Middle East, Africa Email: elx.emea@eaton.com PARAMETRIC SEARCH Drill down into the Eaton Electronics product database to find the right part for your application. IC MATCHING Find the Eaton Electronics parts called out on IC manufacturers' demo and evaluation boards. China Email: elx.cn@eaton.com Japan Email: elx.jp@eaton.com CROSS REFERENCE Find a cross to a competitor's product or to an alternate Eaton Electronics part number. Korea Email: elx.kr@eaton.com South East Asia Email: elx.sea@eaton.com SUPERCAPACITOR CALCULATOR Determine your calculated requirements and design capability. Taiwan Email: elx.tw@eaton.com Global Technical Support Magnetics: InductorTech@eaton.com Circuit Protection: FuseTech@eaton.com Supercapacitors: CapacitorTech@eaton.com www.eaton.com/terminalblocks TERMINAL BLOCK SELECTOR Find the right terminal block for any application. AUTOMOTIVE ELECTRONICS SOLUTIONS Find electronics components for automotive solutions. tools.eatonelectronics.com Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics (c) 2017 Eaton All Rights Reserved Printed in USA Publication No. 10682 -- BU-MC17075 December 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners.