Typical Output
.197 (5mm)
Max.
ORDERING INFORMATION
59036
www.hamlin.com
XX00 T
TABLE 1
Cable Length Options:-
(Cable Type 20 AWG
Type TXL per SAE J-1128)
SELECT LENGTH
OPTION mm
01 (3,94) 100
02 (11,81) 300
03 (19,69) 500
04 (29,53) 750
05 (39,37) 1000
TABLE 2
Termination Options:-
SELECT DESCRIPTION
OPTION
A Tinned leads
B Deutsch DTM04-3P
C Molex MX 150
DIMENSIONS (in) mm BLOCK DIAGRAM
APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Termination
Series 55505
Features
•Ferrous target sensing
•Internal circuit protection
•Protection against severe and
automotive environments
•Self adjusting magnetic range
•Automotive grade circuit protection
•High speed operation
•Short circuit and reverse voltage
protection
•On board 10 bit A/D convertor
Benefits
•No chopper delay
•Rotational alignment to target not
critical
•Immune to target run out
Applications
•Wheel, transmission and camshaft
speed sensing
•Gear tooth sensor
•Rotary encoders
•Industrial
•Commercial
•Automotive
X
55505 Flange Mount Hall Effect Geartooth Sensor
55505
SPECIFICATIONS
Hall Type Digital Switch 3 Wire (Voltage Output)
Supply VoltageOperateVdc4.75 to 24
Supply Voltage Overvoltage Protection Vdc-max. 27
Supply Voltage Reverse Voltage Protection Vdc-max. -25
Output High Voltage Vdc VDD -2 (sinking output with internal pull-up)
Output Low Voltage Vdc-max. 0.6 @ 20mA
Output Current (continuously on) mA-max. 20
Current Consumption mA-max. 1
Current Consumption mA-max. 10.5
Switching Speed kHz-max. 15
Temperature Operating oC -40 to +125
Temperature Storage oC -65 to + 125
SPECIFICATIONS
(.260)
ø6,60 (.937)
ø23,80
(.866)
22,00
(1.630)
41,40 (1.250)
31,75
(.197)
5,00
(.638)
ø16,20
(.703)
ø17,86
(.236)
6,00
Table 1 +/-
(.393) 10,00 (.250)
6,35 Nom
VDD
Pin 3
(Red)
GND
Pin 1
(Black)
OUT
Pin 2
Hall
Plate Switch Comparator Output
Clock
R1
C1
C2
Rpu
Cable Length
Table 2
Termination
Table 1
Hamlin USA Tel: +1 920 648 3000 •Fax: +1 920 648 3001 •Email: sales.us@hamlin.com
Hamlin UK Tel: +44 (0)1379 649700 •Fax: +44 (0)1379 649702 •Email: sales.uk@hamlin.com
Hamlin Germany Tel: +49 (0) 6142 923920 •Fax: +49 (0) 6142 923921 •Email: sales.de@hamlin.com
Hamectrol France Tel: +33(0) 1 6047 3000 •Fax: +33(0) 1 6015 9136 •Email: sales.fr@hamlin.com
Issue No:AC Date:08.01.09 DCR B6063
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION
PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the
product is put. Upon request, HAMLIN will assist purchasers by providing information specific
to any particular application. HAMLIN disclaims any and all liability whatsoever for any
purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
(
W/B
*)
*White with Black Stripe
