http://www.kamaya.co.jp 1 Chip Resistors General purpose http://www.kamaya.co.jp RMC Halogen Free *Features 01005 to 2512 inch size and Jumper chip available. Precise dimension by Laser-scriber method(RMC1/20,RMC1/32). Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Walsin Technology Corporation OEM products (1206 to 0402 inch) are also available. Rated resistance value marking is 3-digit on the over coating except RMC1/16S & RMC1/20 & RMC1/32. 4-digit marking is available for F & G tolerance except RMC1/16, RMC1/16S & RMC1/20 & RMC1/32 type. *Dimensions Style RMC1/32 RMC1/20 W L c RMC1/16S RMC1/16 c H RMC1/10 RMC1/8 d d RMC1/4 RMC1/2 RMC1 Please refer to Specification (Reference) at the Website for Marking. *Ratings Metric Inch Product 0402 01005 KAMAYA 0603 0201 KAMAYA KAMAYA 1005 0402 WALSIN KAMAYA 1608 0603 WALSIN KAMAYA 2012 0805 WALSIN KAMAYA 3216 1206 WALSIN KAMAYA 3225 1210 KAMAYA 5025 2010 6332 2512 KAMAYA Style Rated Dissipation at 70C W RMC1/32 0402 01005 0.03 (0.5A) W 0.2 0.02 0.3 0.03 H 0.130.02 0.230.03 c 0.08 0.03 0.1 0.05 *Unit weight/pc. d 0.1 0.03 0.035mg 0.15 0.05 0.16mg 1.00.05 0.5 0.05 0.350.05 0.2 0.1 0.25 0.05 0.10 1.60.1 0.8 0.450.10 0.3 0.1 0.3 0.1 2mg 2.00.1 1.25 0.10 0.550.10 0.4 0.2 0.4 0.2 5mg 3.20.15 3.10.1 3.20.15 5.00.15 6.30.15 1.6 1.6 2.5 2.5 3.2 0.15 0.1 0.15 0.15 0.15 0.550.10 0.6 0.15 0.550.15 0.550.15 0.550.15 0.5 0.25 0.45 0.20 0.5 0.25 0.6 0.2 0.6 0.2 0.5 0.5 0.5 0.6 0.6 1 10 100 1M 10M 4.79.1 1091 F, J 1001M J 13.92 0603 0201 0.05 (1.0A) F, J 4.029.76 101M 1.1M10M 19.76 1005 0402 0.1 (1.0A) 101M 1.02M10M 0.470.91 RMC1/16 1608 0603 19.76 0.1 (2.0A) 1010M 11M22M 0.270.91 19.76 RMC1/10 2012 0805 0.125 (2.0A) 102.2M 2.21M10M 11M22M 0.220.91 RMC1/8 3216 1206 19.76 0.25 (2.0A) 101M 1.02M10M 11M24M 0.20.91 RMC1/4 3225 1210 19.76 0.5 (2.0A) 101M 1.02M10M 11M22M 0.330.91 RMC1/2 5025 2010 0.75 (2.0A) RMC1 6332 2512 1.0 (2.0A) 19.76 101M 1.1M22M 0.330.91 19.76 101M 1.1M22M Note1. Note2. Note3. Note4. Note5. 0.15 0.05 Tolerance Temperature Coefficient Limiting of Resistance Element on Rated Voltage Resistance Code 10-6/c V Rated Resistance Range 0.470.91 RMC1/16S Unit : mm L 0.40.02 0.60.03 0.6mg 0.25 0.2 0.25 0.2 0.2 9mg 16mg 25mg 40mg *Values for reference Size Metric (Inch) RMC1/20 Antimony Free - - - - - - 600-200 300 200 1000300 600-200 350-100 F, G, J - F, J F, J G, J F F, G, J K F, G, J G, J F J K F, G, J G, J F F, G, J J K F, G, J G, J F F, G, J J K F, J G, J F F, G, J J K F, J G, J F J K F, J G, J F J - - - K - - - - K - - - - K 500-200 200 100 200 1,000300 500-200 200 100 200 1,000300 500-200 200 100 - 200 - - - K - 1,000300 500-200 200 100 - - - K - 1,000300 500-200 200 100 - - - K - - - - K - 1,000300 500-200 200 100 200 1,000300 500-200 200 100 200 Isolation Voltage V Category Temperature Range C 15 50 -55125 25 200 50 100 150 -55155 200 200 500 200 E24 series is available , E96 series is available for tolerance"F"(1%) Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. Jumper : Resistance value is less than 50m ohm. Number Description *Part Example Style RMC Product Type 1/10 103 K Temperature Coefficient of Resistance - Standard Resistor K 100x10-6/C None Jumper F Tolerance on Rated Resistance F 1% G 2% Resistor J 5% K 10% None Rated Dissipation & Size Code Rated Dissipation Metric Inch 0.03W 1/32 0402 01005 0.05W 0201 1/20 0603 0402 1/16S 1005 0.1W 0603 1608 1/16 0805 2012 1/10 0.125W 0.25W 1206 3216 1/8 0.5W 1210 3225 1/4 2010 5025 1/2 0.75W 2512 6332 1 1.0W 2 Rated Resistance E24 Series e.g. : 2R2=2.2 ohm 3-Digit 103=10k ohm E96 Series e.g. : 10R2=10.2 ohm 4-Digit 1002=10k ohm TP Resistor Jumper B PA TH Paper Tape (2 mm pitch) TP Paper Tape TE Embossed Tape BA JP *Packaging & Standard Qty. (Min.) Bulk (Loose Package) All Styles 1,000pcs. 20,000pcs. RMC1/32 Press-Pocket Paper Tape (2 mm pitch) 15,000pcs. RMC1/20 Bulk Case Jumper 10,000pcs. 5,000pcs. 4,000pcs. 25,000pcs. 10,000pcs. 5,000pcs. RMC1/16S RMC1/16 RMC1/16 RMC1/10 RMC1/8 RMC1/4 RMC1/2 RMC1 RMC1/16 RMC1/10 RMC1/8 *Refer to Tape and Packaging information on pages 22 and 23. *Please contact Kamaya sales department for 1mm pitch taping of RMC1/16s, 1/20. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Chip Resistors General purpose http://www.kamaya.co.jp NEW RGC Halogen Free *Features Antimony Free Suitable for precision applications. High stabilized characteristics and Performance equivalent to thin film chip resistors. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Line up, 01005 sizes resistor. *Dimensions L W Rated resistance value marking is with 3-digit (E24) or 4-digit (E96) on the over coating. RGC1/16 : only 3-digit marking is available. RGC1/16S,1/20,1/32 : only No marking is available. c d d H c *Ratings Size Rated Dissipation Metric at 70C (Inch) W Style 0402 (01005) 0.03 RGC1/20 0603 (0201) 0.05 RGC1/16S 1005 (0402) 0.063 RGC1/16 1608 (0603) 0.1 1 (0.063) RGC1/32 Rated Resistance Range 10 100 1k 1M Tolerance on Rated Resistance D(0.5%) 100100k 51976 D(0.5%) 1k1M 1097.6 1001M 1.02M3.3M 2012 (0805) 3216 (1206) 0.125 1 (0.1) 0.25 (0.125) 1 D(0.5%) F(1%) F(1%) 1097.6 1001M 1.02M3.3M RGC1/8 Inch 01005 0201 0402 0603 0805 1206 L 0.40.02 0.60.03 1.00.05 1.60.1 2.00.1 3.20.15 W 0.2 0.02 0.3 0.03 0.5 0.05 0.8 0.15 0.05 1.25 0.10 1.6 0.15 Unit : mm H 0.13 0.02 0.23 0.03 0.35 0.05 0.45 0.10 0.6 0.1 0.6 0.1 c 0.08 0.03 0.1 0.05 0.2 0.1 0.25 0.10 0.4 0.2 0.5 0.25 *Unit weight/pc. 0.035mg 0.16mg 0.6mg 2mg 5mg 9mg d 0.1 0.03 0.15 0.05 0.25 0.05 0.10 0.3 0.1 0.4 0.2 0.5 0.25 *Values for reference 3.39.76 RGC1/10 Metric 0402 0603 1005 1608 2012 3216 Style NEW RGC1/32 RGC1/20 RGC1/16S RGC1/16 RGC1/10 RGC1/8 3.39.76 D(0.5%) F(1%) F(1%) D (0.5%), F (1%) F(1%) D (0.5%), F (1%) 103.3M 3.39.76 104.7M Temperature Coefficient Limiting Element of Resistance Voltage Code 10-6/c V C 50 15 K C K C K 100 50 100 50 100 K 100 Isolation Category Temperature Voltage Range V C *Part Number Description Example Style RGC 50 1/16 C 25 Product Type Rated Dissipation & Size Code Rated Dissipation Metric 55 155 1/32 0.03W 1/20 0.05W 1/16S 0.063W 0.1W 1/16 (0.063W) 0.125W 1/10 (0.1W) 0.25W 1/8 (0.125W) 50 C K 50 100 C 50 150 C 50 200 100 473 D TP 55 125 55 125 (55 155) 1 1608 0603 2012 0805 3216 1206 If Category Temperature Range is "-55~+155", Rated Dissipation is applied to in ( ). 1 If Category Temperature Range is "-55~+155", Rated Dissipation is applied to in ( ). Note1. E24, E96 are avaialable for "F"(1%) and "D"(0.5%) Note2. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note3. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Note4. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. Tolerance on Rated Resistance D 0.5% F 1.0% Inch 0402 01005 0603 0201 1005 0402 Rated Resistance E24 Series e.g. : 473=47k ohm 3-Digit E96 Series e.g. : 7152=71.5k ohm 4-Digit Temperature Coefficient of Resistance C 50x10-6/C K 100x10-6/C * Packaging & Standard Qty. (Min.) Bulk (Loose Package) 1,000pcs. All Styles 20,000pcs. RGC1/32 Press-Pocket Paper Tape (2mm pitch) 15,000pcs. RGC1/20 TH Paper Tape (2 mm pitch) 10,000pcs. RGC1/16S RGC1/16 TP Paper Tape 5,000pcs. RGC1/10 RGC1/8 25,000pcs. RGC1/16 10,000pcs. RGC1/10 BA Bulk Case 5,000pcs. RGC1/8 B PA *Refer to Tape and Packaging information on pages 22 and 23. *Please contact Kamaya sales department for 1mm pitch taping of RGC1/16s, 1/20. NEW RNC *Features Halogen Free Pb Free Suitable for high precision, higher stability and reliability applications. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. New line up minimum sizes resistor 0201inch. *Dimensions L Rated resistance value is maked with 3-digit (E24) or 4-digit (E96) on the over coating. RNC06: only No marking is available. W c Antimony Free c Style NEW RNC06 RNC20 RNC32 Metric 0603 2012 3216 Inch 0201 0805 1206 Unit : mm L 0.60.03 2.00.15 3.10.1 W 0.3 0.03 1.25 0.10 0.05 1.55 0.10 0.05 H 0.230.03 0.6 0.1 0.6 0.1 c 0.1 0.05 0.4 0.2 0.450.20 *Unit weight/pc. 0.16mg 5mg 9mg d 0.150.05 0.3 0.2 0.1 0.3 0.2 0.1 H *Values for reference d d *Ratings Style Size Metric (Inch) RNC06 0603 (0201) RNC20 2012 (0805) RNC32 3216 (1206) Rated Dissipation Rated Resistance Tolerance on Temperature Coefficient Limiting Element Preferred Number Isolation Series for Voltage at 70C of Resistance Voltage Range Rated Resistance -6 Resistors V W V Code 10 /C 0.03 1001k B (0.1%) 25 E 25 50 E 474.99k 15 0.05 D (0.5%) C 50 5.1k10k 100130k B (0.1%) E96 0.1 75 C (0.25%) E24 10130k D (0.5%) 25 100 E B (0.1%) 100180k 0.125 150 C (0.25%) 10180k D (0.5%) Category Temperature Range C *Part Number Description Example Style RNC 32 Product Type 1002 B Temperature Coefficient of Resistance E 25x10-6/C C 50x10-6/C 55 125 Note1. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. E Code 06 20 32 Size Metric Inch 0603 0201 2012 0805 3216 1206 Tolerance on Rated Resistance 0.1% B 0.25% C 0.5% D Rated Resistance E24 Series e.g. : 103=10k ohm 3-Digit E96 Series e.g. : 10R2=10.2 ohm 4-Digit 1002=10k ohm TP * Packaging & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. All Styles Press-Pocket 15,000pcs. RNC06 Paper Tape (2mm pitch) PA TP Paper Tape 5,000pcs. RNC20 RNC32 *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 3 Chip Resistors High Voltage http://www.kamaya.co.jp RVC Halogen Free *Features Antimony Free Higher Limiting Element Voltage compared with RMC series. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions L W Rated resistance is marked with 3-digit (E24) or 4-digit (E96) on the over coating. RVC16 : only 3-digit marking is available. c d d H c Inch 0603 0805 1206 2010 2512 Metric 1608 2012 3216 5025 6332 Style RVC16 RVC20 RVC32 RVC50 RVC63 Unit : mm L 1.60.1 2.00.1 3.20.15 5.00.15 6.30.15 H 0.450.10 0.550.10 0.550.10 0.550.15 0.550.15 W 0.8 0.15 0.05 1.250.10 1.6 0.15 2.5 0.15 3.2 0.15 c 0.3 0.1 0.4 0.2 0.5 0.25 0.6 0.2 0.6 0.2 d 0.3 0.1 0.4 0.2 0.5 0.25 0.6 0.2 0.6 0.2 *Unit weight/pc. 2mg 5mg 9mg 25mg 40mg *Values for reference *Ratings Size Metric (Inch) Style Rated Dissipation Limiting Element at 70C Voltage V W RVC16 1608 (0603) 0.1 200 RVC20 2012 (0805) 0.25 400 RVC32 3216 (1206) 0.25 RVC50 5025 (2010) 0.5 RVC63 6332 (2512) 1.0 Note1. Note2. Note3. Note4. D(0.5%) F(1%) , G(2%) 100k4.7M 500 800 Temperature Coefficient Isolation Category Temperature of Resistance Voltage Range V C 10-6/C Combinations of Rated Resistance Range and Tolerance on Rated Resistance J(5%) , K(10%) *Part Number Description Example Style Code 470 10M 47 464 10051M 10010M 47 97.6 10010M 10051M 47 97.6 47020M 47051M 47 464 56020M 56051M 100 549 47 97.6 K K K K K 100 200 100 200 100 200 100 200 100 200 +500200 RVC 100 32 Product Type Code 16 20 32 50 63 55 125 500 K 475 F Rated Resistance Size Metric Inch 1608 0603 2012 0805 3216 1206 5025 2010 6332 2512 E24 Series e.g. : 475=4.7M ohm 3-Digit E96 Series e.g. : 7154=7.15M ohm 4-Digit TP 0.5% 1% 2% 5% 10% D F G J K B TP 1,000pcs. All Styles Paper Tape 5,000pcs. RVC16 RVC20 RVC32 4,000pcs. RVC50 RVC63 *Refer to Tape and Packaging information on pages 22 and 23. E24 series is available , E96 series is available for tolerance "D" (0.5%) and "F" (1%) Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. Halogen Free *Features Bulk (Loose Package) TE Embossed Tape Temperature Coefficient of Resistance - Standard K 100x10-6/C RZC * Packaging & Standard Qty. (Min.) Tolerance on Rated Resistance Antimony Free Suitable for the backlight inverter for large-screen LCD. Higher Limiting Element Voltage than RVC series. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions L W Rated resistace is marked with 3-digit(E24) on the over coating. Style RZC50 RZC63 Metric 5025 6332 Inch 2010 2512 L 5.00.15 6.30.15 Unit : mm W 2.50.15 3.20.15 H 0.550.15 0.550.15 c 0.50.2 0.60.2 *Unit/weight/pc. 25mg 40mg d 0.60.2 0.60.2 *Values for reference c d d H c *Ratings Style Size Metric (Inch) Temperature Coefficient Preferred Number Rated Dissipation Limiting Element Anti-Rush Rated Resistance Tolerance on Voltage of Resistance at 70C Series for Voltage Charactoristics Range Rated Resistance 10-6/C W Resistors V V RZC50 5025 (2010) 0.5 1500 RZC63 6332 (2512) 1.0 2000 Isolation Voltage V Category Temperature Range C 500 55125 *Part Number Description Style RZC J(5%) 3000 1.0M16M K(10%) 200 E24 M(20%) Note1. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors, when the resistance values is equal to or higher than the critical resistance value. Note3. Anti-Rush Voltage Charactoristics : 3,000V, 1sec "On", 9sec"off" ,100,000 times, Room temperature. 4 Example Product Type 50 Size Code Metric 50 5025 63 6332 Inch 2010 2512 475 J Rated Resistance Tolerance on Rated Resistance J 5% K 10% M 20% e.g.:105=1.0M ohm 475=4.7M ohm 166=16M ohm Temperature Coefficient of Resistance Standard TE * Packaging & Standard Qty. (Min.) B TE Bulk (Loose Package) 1,000pcs. All Styles Paper Tape 4,000pcs. All Styles *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Chip Resistors Surge http://www.kamaya.co.jp RPC Halogen Free *Features *Dimensions Antimony Free Higher Anti surge performance compared with RMC series. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. L Rated resistance value is marked with 3-digit on the over coating. W Style RPC20 RPC32 RPC35 RPC50 RPC63 c c Metric 2012 3216 3225 5025 6332 Inch 0805 1206 1210 2010 2512 L 2.00.1 3.20.15 3.20.15 5.00.15 6.30.15 Unit : mm W 1.25 0.10 1.6 0.15 2.5 0.15 2.5 0.15 3.2 0.15 H 0.550.10 0.550.10 0.550.15 0.550.15 0.550.15 c 0.30.2 0.30.2 0.30.2 0.30.15 0.30.15 d 0.40.2 0.50.25 0.50.25 0.60.2 0.60.2 *Unit weight/pc. 5mg 9mg 16mg 25mg 40mg H *Values for reference d d *Ratings Style Size Metric (Inch) Rated Dissipation at 70C W RPC20 2012 (0805) 0.125 RPC32 3216 (1206) 0.25 RPC35 3225 (1210) 0.5 RPC50 5025 (2010) 0.75 RPC63 6332 (2512) 1.0 Combinations of Rated Resistance Range and Temperature Coefficient of Resistance Rated Resistance Temperature Coefficient of Resistance 10-6/C Range Tolerance on Rated Resistance Limiting Element Preferred Number Voltage Series for V Resistors Isolation Voltage V Category Temperature Range C 500 55 155 150 0.270.91 1 1M 1.1M22M 200 100 J ( 5%) 200 M(20%) K(10%) E24 200 Note1. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors, when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. *1Pulse Limiting Power Curve Comparison (e.g 100 value for reference) RPC63 RPC50 RPC35 RPC32 RPC20 1,000 10,000 RPC Series 100 10 1 RMC Series Pulse limiting power (w) Pulse limiting power (w) 10,000 RMC1 RMC1/2 RMC1/4 RMC1/8 RMC1/10 1,000 100 10 1 10 Pulse duration (ms) 100 1,000 1 1 10 Pulse duration (ms) 100 1,000 * pulse limiting power curve is different from resistance value. * Please contact Kamaya sales department for the details. *Part Number Description Example Style RPC 50 Product Type Code 20 32 35 50 63 103 J TE Size Rated Resistance Metric 2012 3216 3225 5025 6332 E24 Series e.g. : 2R2=2.2 ohm 3-Digit 103=10k ohm Tolerance on Rated Resistance J 5% K 10% M 20% * Packaging & Standard Qty. (Min.) Bulk (Loose Package) 1,000pcs. All Styles RPC20 TP Paper Tape 5,000pcs. RPC32 RPC35 4,000pcs. RPC50 TE Embossed Tape RPC63 Inch 0805 1206 1210 2010 2512 B *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 5 Chip Resistors Sensing http://www.kamaya.co.jp RLC Halogen Free *Features *Dimensions Antimony Free Most suitable for a detection of current in power source circuits, motor circuits, etc. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Rated resistance is marked with 4-digit on the over coating. (RLC20~RLC63) RLC10 : only No marking is available. Please contact KAMAYA for marking of RLC16. W L c d d H c Metric 1005 1608 2012 3216 3225 5025 6332 Style RLC10 RLC16 RLC20 RLC32 RLC35 RLC50 RLC63 Rated Size Rated Dissipation Rated Current at 70C Range Resistance Metric W A Range (Inch) 1005 (0402) RLC10 0.125 c 0.20.1 0.30.1 0.40.2 0.50.25 0.50.25 0.60.2 0.60.2 d 0.250.05 0.10 0.3 0.1 0.4 0.2 0.3 0.2 0.1 0.3 0.2 0.1 0.6 0.2 0.6 0.2 *Unit weight/pc. 0.6mg 2mg 5mg 9mg 16mg 25mg 40mg Combinations of Rated Resistance Range,Temperature Isolation Category Temperature Coefficient of Resistance and Tolerance on Rated Resistance Range Voltage Temperature Coefficient Rated Resistance Tolerance on C V of Resistance 10-6/C Range Rated Resistance 100m220m 240m430m 470m3.3 3.610 J F, J F, G, J F, J 100m180m 200m430m 470m3.3 3.610 F, G, J F, G, J F, G, J F, J 0 250 0 200 50m180m 200m430m 470m3.3 3.610 F, G, J F, G, J F, G, J F, J 0 250 0 200 50m180m 200m430m 470m3.3 F, G, J F, G, J F, G, J 0 250 0 200 100 1608 (0603) 0.25 0.141.58 100m10 RLC20 2012 (0805) 0.33 0.152.56 RLC32 3216 (1206) 0.5 0.183.16 RLC35 3225 (1210) 5025 (2010) 6332 (2512) 0.66 0.443.63 0.75 0.473.87 1.0 0.554.47 RLC63 Unit : mm H 0.35 0.05 0.45 0.10 0.6 0.1 0.6 0.1 0.6 0.15 0.6 0.15 0.6 0.15 W 0.5 0.05 0.8 0.15 0.05 1.25 0.10 1.6 0.15 2.5 0.15 2.5 0.15 3.2 0.15 0.111.11 100m10 RLC16 RLC50 L 1.00.05 1.60.1 2.00.15 3.10.2 3.10.2 5.00.2 6.30.2 *Values for reference *Ratings Style Inch 0402 0603 0805 1206 1210 2010 2512 50m10 50m3.3 0 300 0 200 100 100 100 55 125 100 500 Note1. Rated Current = (Rated Dissipation)/(Rated Resistance) Note2. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note3. Limiting Element Voltage*1 is set up on RLC16, 20, 32, and rated current is not applied in the range of following rated of Resistance*2. *1 RLC16=1.41V, RLC20=1.58V, RLC32=1.81V *2 RLC16 and RLC207.5R , RLC326.2R The Rated Current in the above range of the Rated Resistance Value is calculated as below way. Rated Current=Limiting Element Voltage/Rated Resistance *Rated Resistance Resistance 50m 51m 56m 60m 62m 65m 68m 70m 75m 80m Code R050 R051 R056 R060 R062 R065 R068 R070 R075 R080 Resistance 82m 90m 91m 100m 110m 120m 130m 150m 160m 180m Code R082 R090 R091 R100 R110 R120 R130 R150 R160 R180 Resistance 200m 220m 240m 250m 270m 300m 330m 360m 390m 400m Code R200 R220 R240 R250 R270 R300 R330 R360 R390 R400 Resistance 430m 470m 500m 510m 560m 600m 620m 650m 680m 700m Code R430 R470 R500 R510 R560 R600 R620 R650 R680 R700 Resistance 750m 800m 820m 900m 910m 1.0 1.1 1.2 1.3 1.5 Code R750 R800 R820 R900 R910 1R00 1R10 1R20 1R30 1R50 Resistance 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 Code 1R60 1R80 2R00 2R20 2R40 2R70 3R00 3R30 3R60 3R90 Resistance 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 Code 4R30 4R70 5R10 5R60 6R20 6R80 7R50 8R20 9R10 100 Note3. Other nominal resistances values are also available, please contact KAMAYA for further information. *Part Number Description Example Style RLC 32 6 R470 F TP Rated Resistance Product Type Size Code Metric 10 1005 16 1608 20 2012 32 3216 35 3225 50 5025 63 6332 K Inch 0402 0603 0805 1206 1210 2010 2512 e.g.: R050=50m ohm R100=100m ohm 1R00=1 ohm 100=10 ohm Temperature Coefficient of Resistance K 100 10-6/C 0 200 10-6/C - 0 250 10-6/C 0 300 10-6/C Tolerance on Rated Resistance F 1% G 2% J 5% B TH * Packaging & Standard Qty. (Min.) Bulk (Loose Package) 1,000pcs. All Styles Paper Tape(2mm pitch) 10,000pcs. RLC10 TP Paper Tape TE Embossed Tape 5,000pcs. RLC16 RLC20 RLC32 4,000pcs. RLC35 RLC50 RLC63 *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Chip Resistors Sensing http://www.kamaya.co.jp NEW RCC Halogen Free *Features *Dimensions Antimony Free Pb Free New lineup, 0201 & 1206 Size, Lower than 50m. Suitable for current sensing of small mobile devices. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Resistance value is marking on surface. Please refer to Specification (Reference) on kamaya website. Please contact Kamaya Sales Dept. for marking of RCC16. RCC10 & RCC06 is no marking. W L c RCC16 1608 RCC20 2012 H c Style Metric NEW RCC06 0603 RCC10 1005 d d NEW *Ratings 3216 Size Metric (Inch) RCC10 0603(0201) 1005 (0402) RCC16 1608 (0603) Rated Dissipation at 70C W 0.1 Rated Current Range A 1.02.23 0.125 1.112.23 0.25 1.585.00 0.33 2.565.74 0.5 2.235.00 2012 (0805) 3216 (1206) RCC20 RCC32 Note1. Rated Current = Note2. Rated Voltage = 0.8 2.00.15 3.10.2 c 0.03 0.23 - 0.10 0.05 0.35 - 0.10 0.15 0.25 0.5 0.10 0.3 0.1 1.25 0.10 0.6 0.10 0.4 0.2 1.6 0.15 0.6 0.10 0.5 0.25 0.15 - 0.05 *Rated Resistance Style 20 Size Code Metric 06 10 16 20 32 1.60.1 H d 0.15 0.05 0.05 0.25 - 0.10 0.3 0.1 0.55 0.1 0.4 0.2 0.6 0.2 0.5 0.25 0.05 - 0.10 0.05 - 0.10 *Unit weight/pc. 0.16mg 0.6mg 2mg 5mg 9mg 0603 1005 1608 2012 3216 Inch 0201 0402 0603 0805 1206 Isolation Voltage V 50 Category Temperature Range C 100 55125 500 (Rated Dissipation)/(Rated Resistance) (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Example Product Type W 0.3 0.03 0.5 0.05 Combination of Rated Resistance Range and Temperature Coefficient of Resistance Tolerance on Rated Resistance Temperature Coefficient Rated Resistance of Resistance 10-6/C Range 0+500 20m 100m J (5%) 0+350 25m 50m 51m 100m 150 10m 30m 0+350 33m 50m 0+250 F (1%) 51m 100m 150 J (5%) 10m 27m 0+250 30m 50m 150 20m 33m 0+250 36m 100m 100 *Part Number Description RCC Unit : mm L 0.60.03 1.00.05 *Values for reference Style RCC06 RCC32 Inch Rated Resistance 0201 All Resistance 0402 All Resistance 20m R 0603 R > 20m 20m R 0805 R > 20m 1206 All Resistance R050 F Rated Resistance e.g.: R050=50m R100=100m Tolerance on Rated Resistance F 1% J 5% *Precautions of use TP B * Packaging & Standard Qty. (Min.) 1,000pcs. Bulk (Loose Package) All style PA Press-Pocket Paper Tape (2mm pitch) 15,000pcs. RCC06 TH Paper Tape (2mm pitch) 10,000pcs. RCC10 TP Paper Tape 5,000pcs. RCC16 RCC20 RCC32 *Refer to Tape and Packaging information on page 22 and 23. 1. Resistive element is on bottom surface. Please note for inspection of parts existence & nonexistence, inversion mounting by Inspection machine. 2. Resistance value will be changed by soldering condition. Please design products in consideration of this change of resistance value. Resistance 10m 15m 20m 22m 24m 25m 27m 30m 33m 36m Code R010 R015 R020 R022 R024 R025 R027 R030 R033 R036 Mark 010 015 020 022 024 025 027 030 033 036 Resistance 39m 40m 43m 47m 50m 51m 56m 60m 62m 65m Code R039 R040 R043 R047 R050 R051 R056 R060 R062 R065 Mark 039 040 043 047 050 051 056 060 062 065 Resistance 68m 70m 75m 80m 82m 90m 91m 100m Code R068 R070 R075 R080 R082 R090 R091 R100 Mark 068 070 075 080 082 90 091 R10 Please contact Kamaya Sales Dept. for any other resistance values. RLS Halogen Free Antimony Free *Features *Dimensions Suitable for current detection of high-precision circuits. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. L Rated resistance value is marked with 4-digit on the over coating. W c d d Inch 2010 2512 L 5.00.2 6.30.2 Unit : mm W 2.50.15 3.20.15 H 0.60.15 0.60.15 c 0.60.2 0.60.2 d 0.60.2 0.60.2 *Unit weight/pc. 25mg 40mg *Values for reference H c Metric 5025 6332 Style RLS50 RLS63 *Ratings Size Style Metric (Inch) Rated Dissipation at 70C W Rated Current Range A RLS50 5025 (2010) 0.75 1.936.12 RLS63 6332 (2512) 1.0 2.237.07 Combinations of Rated Resistance Range and Temperature Coefficient of Resistance Rated Resistance Range 20m 33m 36m 47m 50m200m Temperature Coefficient of Resistance 10-6/C 0350 0200 0150 Note1. Rated Current = (Rated Dissipation)/(Rated Resistance) Note2. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) *Part Number Description Tolerance on Rated Resistance F(1%) G(2%) J(5%) Isolation Voltage V Category Temperature Range C Example Style RLS Product Type 500 55125 50 Size Code Metric 50 5025 63 6332 R050 Rated Resistance Inch 2010 2512 e.g.: R050=50m ohm R100=100m ohm F TE Tolerance on Rated Resistance F 1% G 2% J 5% * Packaging & Standard Qty. (Min.) B TE Bulk (Loose Package) 1,000pcs. Paper Tape 4,000pcs. *Refer to Tape and Packaging information on pages 22and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 7 Chip Resistors Sensing http://www.kamaya.co.jp NEW RLP,MLP Halogen Free *Features *Dimensions Antimony Free Pb Free New lineup, 1m to 5m,10m,15m. Suitable for current sensing of battery pack. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Resistance value of RLP series are marked like below. The resistance value of RLP63 & MLP63 are marked with 4 charactors on the overcoating. The resistance value of RLP20 & RLP32 are marked with "2 numbers" & "_" on the overcoating. Please contact KAMAYA for marking of RLP16. L W Style RLP16 NEW RLP20 NEW c H c Metric 1608 2012 Inch 0603 0805 3216 1206 RLP32 RLP63 6332 d Rated Resistance 10m 10m 1m 2m 5m 10m 15m 1m 5m 10m 15m 5m 10m 2512 d NEW MLP63 L 1.60.1 2.00.15 W 0.8 0.1 1.250.15 3.20.15 1.6 0.15 H 0.3 0.1 0.220.10 0.320.15 3.2 0.25 6.30.25 3.1 0.25 0.350.10 0.280.10 0.220.10 0.380.15 0.340.15 0.230.15 0.510.15 0.350.15 Unit : mm c 0.1 0.1 0.25 0.25 0.25 d 0.3 0.1 0.470.20 1.1 0.25 0.5 0.25 1.0 0.25 0.5 0.25 0.5 0.25 2.2 0.25 1.950.25 1.750.25 0.950.25 1.1 0.25 0.5 0.25 2.2 0.25 1.950.25 1.750.25 0.950.25 1.1 0.25 0.5 0.25 0.2 0.3 1.1 0.5 1.0 *Unit weight/pc. 2mg 3mg 12mg 11mg 11mg 9mg 6mg 50mg 43mg 30mg 26mg 64mg 41mg *Values for reference *Ratings Style RLP16 RLP20 Rated Dissipation at 70C W Rated Current Range A 1608 (0603) 2012 (0805) 0.33 5.7 10m 7.0 10m 0.5 3216 (1206) RLP32 RLP63 Combination of Rated Resistance Range and Temperature Coefficient of Resistance Tolerance on Coefficient Rated Resistance Rated Resistance Temperature of Resistance Range Code 10-6/C Size Metric (Inch) 31.6 1m 22.3, 14.1, 10, 8.1 2m, 5m, 10m, 15m 2 44.7 1m 1 14.1, 10, 8.1 5m, 10m, 15m 2 20.0, 14.1 5m, 10m 1 6332 (2512) MLP63 100 70 100 70 150 100 100 70 150 70 100 70 100 70 K N K N K K N N K N K N Isolation Voltage V Category Temperature Range C 100 55 155 F(1%) J(5%) Note1. Rated Current = (Rated Dissipation)/(Rated Resistance) Note2. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note3. Please contact Kamaya Sales Dept. for any other resistance values. Number Description *Part Example Style RLP 63 Product Type RLP MLP Size Code Metric 16 20 32 63 1608 2012 3216 6332 Inch 0603 0805 1206 2512 *Rated Resistance Resistance Marking RLP16 RLP20 10m 10m 1m 2m 5m 10m 15m 1m 5m 10m 15m 5m 10m No Marking 10 01 02 05 10 15 R001 R005 R010 R015 R005 R010 RLP63 MLP63 F TE Rated Resistance e.g.: R001=1m R010=10m Tolerance on Rated Resistance F 1% J 5% Temperature Coefficient of Resistance - K N 150 10-6/C 100 10-6/C 70 10-6/C * Packaging & Standard Qty. (Min.) RLP16 5,000pcs. RLP20 RLP32 TE Embossed Tape 4,000pcs. RLP63 MLP63 TP Paper Tape *Refer to Tape and Packaging information on page 22 and 23. *Recommended land Pattern Style RLP32 R005 K X Y A B Y Unit : mm Style Metric Inch Rated Resistance A B X Y RLP16 RLP20 1608 2012 0603 0805 0.8 1.35 3216 1206 1.0 0.8 1.0 2.1 1.4 2.2 2.7 RLP32 10m 10m 1m 2m 5m 10m 15m 1m 5m 10m 15m 5m 10m 3.9 1.7 0.6 0.95 1.45 0.9 1.25 RLP63 6332 MLP63 2512 2.1 0.9 2.0 2.4 2.8 2.6 7.6 4.0 3.5 1.8 *Values for reference *Precautions of use Resistance value will be changed by soldering condition. Please design products in consideration of this change of resistance value. 8 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Chip Resistors Chip Network http://www.kamaya.co.jp RAC Halogen Free *Features Antimony Free High-density SMD packaging contributes higher productivity and reduces assembly costs. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Walsin Technology Corporation OEM products are also available. *Dimensions a Q1 R1 R2 Rn W W a b W a Circuits Terminal Style: C P b Terminal Style: C Q1 Q2 b Terminal Style: C Q2 R1=R2=...=Rn P L P P RAC104D RAC164D L RAC102D H H H * Please contact KAMAYA for different resistance values. L RAC168D Note. Please contact KAMAYA for the detail of marking on the over coating. Style Terminal Style RAC102D C RAC104D C RAC164D C RAC168D Product KAMAYA WALSIN KAMAYA WALSIN KAMAYA WALSIN WALSIN C L 1.00.05 1.00.1 2.00.1 2.00.1 3.20.1 3.20.1 3.80.1 W 1.00.05 1.00.1 1.00.1 1.00.1 1.60.1 1.60.1 1.60.1 Unit : mm H 0.350.05 0.350.10 0.350.05 0.450.10 0.5 0.1 0.5 0.1 0.450.1 Q1 *Q2 0.330.10 0.340.05 0.450.10 0.4 0.1 0.6 0.15 0.6 0.1 0.350.1 0.3 0.05 0.4 0.15 0.4 0.1 0.3 0.1 a 0.150.10 0.2 0.15 0.150.10 0.2 0.1 0.3 0.2 0.3 0.1 0.3 0.1 b 0.25 0.05 0.10 0.250.17 0.250.10 0.250.10 0.250.15 0.3 0.2 0.3 0.1 *P *Unit weight/pc. 0.65 1.1mg 0.5 2.1mg 0.8 7mg 0.5 8.3mg *Values for reference *Part Number Description *Ratings Rated Dissipation at 70C W/Element W/pc. Style RAC102D Rated Resistance Range Tolerance on Rated Resistance 0.125 RAC104D RAC164D Rated Current of Jumper A 0.25 RAC168D 101M 1.0 F(1%)J(5%) 200 Example Category Temperature Range C Style RAC 10 2 D Product Type Size 10 W:1.0mm 16 W:1.6mm No. of Elements 2 2-Elements 4 4-Elements 8 8-Elements Circuits D Isolation 103 E24 100 55 125 25 Note1. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. B Terminal Style C Rated Resistance E24 Series e.g.:103=10k ohm Resistor Jumper JP RAC168U *Features C J 50 50 J(5%) 0.25 Isolation Voltage V 25 J(5%) 0.25 0.063 Temperature Coefficient Limiting Element Preferred Number Voltage of Resistance Series for V Resistors 10-6/C * Packaging & Standard Qty. (Min.) Convex Type With corner B Bulk (Loose Package) 1,000pcs. All Styles TH Paper Tape (2 mm pitch) 10,000pcs. RAC102D RAC104D Tolerance on Rated Resistance F 1% Resistor J 5% None Jumper TP Paper Tape 5,000pcs. RAC164D RAC168D *Refer to Tape and Packaging information on pages 22 and 23. Halogen Free Antimony Free Highly suitable for the purposes of pull-up and pull-down. Easy to handle because of no specified direction for mounting due to the symmetrical position of common terminals. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions *Application Examples Circuits * Making the parallel 8-Elements resister for pull-up / pull-down into one chip. * Ideal for high density SMT applications as direct mounting on the bus line is possible. a b Q2 D Q1 R6 R7 R2 R3 R4 R8 W R5 R1 Vcc H R1=R2=...=R7=R8 P Rated resistance is marked with 3-digit on the over coating. L Style Terminal Style RAC168U C L 3.20.2 W 1.60.1 Unit : mm Q1 D *Q2 0.320.10 0.320.10 0.53 H 0.50.1 a 0.3 0.2 b *P *Unit weight/pc. 0.30.15 0.64 7.6mg *Values for reference *Ratings Style Rated Dissipation at 70C W Rated Resistance Range Tolerance on Rated Resistance 1018 RAC168U J(5%) 0.063 201M Temperature Coefficient of Resistance 10-6/C Limiting Element Voltage V Preferred Number Series for Resistors Isolation Voltage V Category Temperature Range C 25 E24 100 55 125 250 200 *Part Number Description Example Style RAC Product Type Note1. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. 16 8 16 Size W:1.6mm U No. of Elements 8 8-Elements U 103 J C Rated Resistance E24 Series e.g. : 103=10k ohm Circuits Common Electrode 2: Same Type C TP Terminal Style Convex Type With corner Tolerance on Rated Resistance J 5% * Packaging & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TP Paper Tape 5,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 9 Chip Resistors Trimmable & Sensing http://www.kamaya.co.jp FCR Halogen Free *Features Antimony Free Trimmable device and replaceable with various resistors. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions L W Unit : mm c d d H c *Ratings Style FCR1/16 FCR1/10 FCR1/8 FCR1/4 FCR1/2 FCR1 Note1. Note2. Note3. Note4. Note5. Size Metric (Inch) Rated Dissipation at 70C W 1608 (0603) 2012 (0805) 3216 (1206) 3225 (1210) 5025 (2010) 6332 (2512) 0.063 Inch 0603 0805 1206 1210 2010 2512 L 1.60.1 2.00.1 3.20.15 3.20.15 5.00.15 6.30.15 W H 0.450.10 0.550.10 0.550.10 0.550.15 0.550.15 0.550.15 0.8 0.15 0.10 1.25 0.10 1.6 0.15 2.5 0.15 2.5 0.15 3.2 0.15 Combinations of Rated Resistance Range and Temperature Coefficient of Resistance Temperature Coefficient Rated Resistance of Resistance 10-6/C Range Tolerance on Rated Resistance Limiting Element Preferred Number Voltage Series for V Resistors 200 104.7M 50 Isolation Voltage V Category Temperature Range C d 0.30.1 0.40.2 0.50.25 0.50.25 0.60.2 0.60.2 *Unit weight/pc. 2mg 5mg 9mg 16mg 25mg 40mg *Part Number Description Example Style FCR 500200 200 19.1 104.7M 1/4 Product Type L (15%) (030%) E24 500 55 125 200 0.5 471 L TE 100 150 0.125 1.0 Rated Dissipation & Size Code Rated Dissipation Metric Inch 1/16 0.063W 1608 0603 1/10 0.1W 2012 0805 1/8 0.125W 3216 1206 1/4 0.25W 3225 1210 1/2 0.5W 5025 2010 1 1.0W 6332 2512 Tolerance on Rated Resistance 0 - -30 % L 15% * Packaging & Standard Qty. (Min.) Bulk (Loose Package) All Styles 1,000pcs. FCR1/16 Paper Tape 5,000pcs. FCR1/10 FCR1/8 B TP Rated Resistance Embossed Tape TE E24 Series e.g. : 471=470 ohm 4,000pcs. FCR1/4 FCR1/2 FCR1 *Refer to Tape and Packaging information on pages 22 and 23. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. T.C.R.: 100x10-6/C (10 ohm1M ohm) is available on your request. The indicated values of Ratings are in the case without trimming. RHC *Features c 0.30.1 0.40.2 0.50.25 0.50.25 0.60.2 0.60.2 *Values for reference 0.1 0.25 Metric 1608 2012 3216 3225 5025 6332 Style FCR1/16 FCR1/10 FCR1/8 FCR1/4 FCR1/2 FCR1 Halogen Free Free Halogen Antimony Free Antimony Free Suitable for compact instrumentation, infrared rays, sensors, etc. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions L Unit : mm W Style RHC16 RHC20 Metric 1608 2012 Inch 0603 0805 L 1.60.1 2.00.1 W 0.8 0.15 0.05 1.250.10 H 0.450.10 0.550.10 c 0.30.1 0.40.2 d 0.30.1 0.40.2 *Unit weight/pc. 2mg 5mg *Values for reference c d d H c *Ratings Style RHC16 Size Metric (Inch) Rated Voltage V 1608 (0603) Rated Resistance Range 100M 270M J ( 5%) 100M 4G K M N H J K (10%) (20%) (30%) (50%) ( 5%) (10%) 100M 150G 15 RHC20 2012 (0805) 100M 1G 100M 10G 100G 150G 10 Tolerance on Rated Resistance M (20%) N (30%) H (50%) Temperature Coefficient Preferred Number Isolation Category Temperature of Resistance Range Voltage series for resistors 10-6/C C V 55 155 02,000 E12 2,000 4,000 100 55 125 *Part Number Description Style RHC 20 Product Type Size Code Metric 16 1608 20 2012 Inch 0603 0805 75G0 M TP Rated Resistance e.g.: 100M=100M ohm 1G00=1G ohm 10G0=10G ohm 100G=100G ohm Tolerance on Rated Resistance J 5% K 10% M 20% N 30% H 50% * Packaging & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. 5,000pcs. TP Paper Tape Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS *Refer to Tape and Packaging information on pages 22 and 23. Chip Attenuators & ChipT hermistors http://www.kamaya.co.jp RAC101A *Features Halogen Free Antimony Free Suitable for use at DC and up to UHF band frequencies. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Q a 2 Circuits 1 2 4 3 W 1 b *Dimensions Unbalanced 3 Type Unit : mm H 4 P L Style Terminal Style L W H Q a b P *Unit weight/pc. RAC101A C 1.00.1 1.0 0.10 0 0.350.1 0.330.10 0.150.10 0.250.10 0.650.10 1.1mg *Values for reference Dot mark on Termination 1 Attenuation factor on Termination 2 to 3 *Ratings Style RAC101A Characteristic Impedance 50 ohm Attenuation Factor symbol dB 1 2 3 4 5 6 7 8 9 A 1 2 3 4 5 6 7 8 9 10 Tolerance on Attenuation Voltage Standing Factor Wave Ratio dB Frequency Range Rated Input Power mW/package Category Temperature Range C *Part Number Description Example Style RAC 10 Product Type 0.3 DC f 3GHz 1.2max. 100 -40~+125 10 1 1 A Characteristic Impedance 1 50 ohm Size W:1.0mm A TH C Attenuation Factor Circuits Unbalanced Type 0.4 1 2 3 4 5 6 7 8 9 A 1dB 2dB 3dB 4dB 5dB 6dB 7dB 8dB 9dB 10dB * Packaging & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TH Paper Tape (2 mm pitch) 10,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. C Terminal Style Convex Type With corner Note. The following information is available. 1. Test methods for Attenuation Factor and VSWR characteristics. LTC Halogen Free *Features Antimony Free Pb Free Linearity of resistance change in wide temperature range. Suitable for temperature compensation, temperature sensing and controling, and circuit protection applications. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions L W Rated resistance and T.C.R. value are marked with 4-digit on the over coating. e.g. 10E3... 10 : 1,000x10-6/C E3 : 1.5k ohm c Please contact KAMAYA Sales department for further information. c Unit : mm H Style LTC1/10 LTC1/8 d *Ratings Temperature Coefficient of Resistance Resistance Temperature 10-6/C Coefficient Tolerance Code 100x10-6/C 500 05 800 08 150x10-6/C 1,000 10 15% 1,500 15 2,000 20 2,400 24 2,800 28 3,000 30 10% 3,300 33 3,600 36 3,900 39 4,200 42 4,500 45 d Metric 2012 3216 Inch 0805 1206 L 2.00.15 3.10.1 W 1.25 0.10 0.05 1.550.10 H 0.60.1 0.60.1 c 0.4 0.2 0.450.20 d 0.3 0.2 0.1 0.3 0.2 0.1 *Unit weight/pc. 5mg 9mg *Values for reference Rated Resistance Range (Rated Dissipation at 70C) LTC1/10 (0.1W) LTC1/8 (0.125W) 100 ohm 5.1k ohm 100 ohm 5.1k ohm 100 ohm 5.1k ohm 100 ohm 3.3k ohm 100 ohm 3.3k ohm 100 ohm 1.6k ohm 100 ohm 3.3k ohm 100 ohm 3.3k ohm 100 ohm 3.3k ohm 51 ohm 910 ohm 51 ohm 560 ohm 33 ohm 360 ohm 33 ohm 200 ohm 100 ohm 10k ohm 100 ohm 10k ohm 100 ohm 10k ohm 100 ohm 4.7k ohm 100 ohm 4.7k ohm 100 ohm 2.2k ohm 100 ohm 3.6k ohm 100 ohm 3.6k ohm 100 ohm 3.6k ohm 51 ohm 1.2k ohm 51 ohm 910 ohm 33 ohm 470 ohm 33 ohm 180 ohm *Part Number Description Example Tolerance on Rated Resistance Preferred Number Series for Resistors Isolation Voltage V Category Temperature Range C Style LTC Product Type J(5%) E24 100 40+125 1/8 30 Rated Dissipation & Size Code Rated Dissipation Metric Inch 1/10 0.1W 2012 0805 1/8 0.125W 3216 1206 102 J Rated Resistance Tolerance on Rated Resistance J 5% E24 Series e.g.:102=1k ohm Temperature Coefficient of Resistance Refer to Ratings Table on next page e.g.: 30=3,000x10-6/C B * Packaging & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TP Paper Tape 5,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Note1. Rated Voltage = (Rated Disspation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Listed above will be made by order. Please contact KAMAYA for further information. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 11 Chip Fuses Circuit Protection http://www.kamaya.co.jp FCC,FHC *Features Halogen Free Fast-Atcting Type. Suitable for over-current protection of the circuit of miniature portable equipment. Please contact Kamaya Sales Dept, if you need to confirm Inrush current endurance, Anti-pulce performance etc. We can provide Application Guide for FCC,FHC selection. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Certified UL, c-UL. *Dimensions File No. : E176847 Ratings/Option Code AD, AB, AA W H c d Pb Free Current value is marked on the cover coating. Please refer to Ratings table as below. L c Antimony Free Style FCC10 FHC10 FCC16 FHC16 FCC20 FHC20 FCC32 FHC32 Unit : mm Metric Inch L W H c d *Unit weight/pc. 1005 0402 1.00.05 0.5 0.05 0.4 0.05 0.20.1 0.250.10 0.8mg 1608 0603 1.60.1 0.8 0.450.10 0.30.15 0.3 0.1 2mg 2012 0805 2.00.1 1.250.10 0.6 0.1 0.40.2 0.4 0.2 6mg 3216 1206 3.20.2 1.6 0.15 0.6 0.1 0.650.10 0.50.25 0.5 0.25 10mg 11mg L 1.00.05 W 0.5 0.05 H 0.35 Max. c 0.20.1 d 0.250.10 *Unit weight/pc. 0.6mg 0.15 0.05 Ratings/Option Code LB d Style FCC10 Metric 1005 Inch 0402 *Values for reference * Ratings/Option Code : AD (Fast-Acting type) Size Metric Inch Style FCC10 1005 0402 FHC10 FCC16 1608 0603 FHC16 FCC20 2012 0805 FHC20 FCC32 3216 1206 FHC32 12 Code 151 201 251 321 401 501 631 801 102 132 162 202 252 322 151 201 251 321 401 501 631 801 102 132 162 202 252 322 402 401 501 631 801 102 132 162 202 252 322 402 502 201 251 321 401 501 631 801 102 132 152 162 202 252 322 402 502 Rated Current A 0.15 0.2 0.25 0.315 0.4 0.5 0.63 0.8 1.0 1.25 1.6 2.0 2.5 3.15 0.15 0.2 0.25 0.315 0.4 0.5 0.63 0.8 1.0 1.25 1.6 2.0 2.5 3.15 4.0 0.4 0.5 0.63 0.8 1.0 1.25 1.6 2.0 2.5 3.15 4.0 5.0 0.2 0.25 0.315 0.4 0.5 0.63 0.8 1.0 1.25 1.5 1.6 2.0 2.5 3.15 4.0 5.0 Internal Resistance m ohm max. Mark 2,700 1,000 750 620 340 290 210 150 120 90 55 40 36 26 4,000 1,800 1,000 750 330 280 200 130 110 85 70 55 45 26 19 330 270 190 130 100 80 65 55 40 26 19 14 1,800 1,000 750 350 295 200 140 110 85 78 75 65 45 26 19 14 O Z C D E F I K L M N S T U OD ZD CD DD ED FD ID KD LD MD ND SD TD UD XD 401 501 631 801 102 132 162 202 252 UD XD YD 201 251 321 401 501 631 801 102 132 152 162 202 252 UD XD YD Interrupting Rating 32Vd.c. 35A 30Vd.c. 35A 24Vd.c. 35A 50Vd.c. 35A 36Vd.c. 35A 32Vd.c. 35A 24Vd.c. 35A Time/Current Characteristics Rated Current 250% Opening Time 5s max. 50Vd.c. 50A 32Vd.c. 50A 24Vd.c. 50A 64Vd.c. 50A 32Vd.c. 50A Working Temperature Range C Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS -55125 Chip Fuses Circuit Protection http://www.kamaya.co.jp FCC, FHC *Ratings/Option Code : AB (Fast-Acting type) Size Metric Inch Style Code 201 251 321 401 501 631 751 801 102 132 152 162 202 252 201 251 321 401 501 631 751 801 102 132 152 162 202 252 501 631 801 102 132 162 202 252 FCC10 1005 0402 FHC10 1608 0603 FCC16 FHC16 2012 0805 FCC20 FHC20 Size Metric 1005 Inch 0402 Rated Current A Style Code FCC10 Internal Resistance m ohm max. Mark 2,400 1,000 750 620 340 290 220 210 150 120 100 90 55 40 3,200 1,800 1,000 750 330 280 210 200 130 110 95 85 70 40 330 270 190 130 100 80 65 40 Z C D E F I A K L M H N S T ZB CB DB EB FB IB AB KB LB MB HB NB SB TB FB IB KB LB MB NB SB TB 0.2 0.25 0.315 0.4 0.5 0.63 0.75 0.8 1.0 1.25 1.5 1.6 2.0 2.5 0.2 0.25 0.315 0.4 0.5 0.63 0.75 0.8 1.0 1.25 1.5 1.6 2.0 2.5 0.5 0.63 0.8 1.0 1.25 1.6 2.0 2.5 Rated Current A 321 Internal Resistance m ohm max. Mark 750 3 Internal Resistance m ohm max. Mark 0315 Interrupting Rating Time/Current Characteristics Working Temperature Range C 30Vd.c. 35A 24Vd.c. 35A Rated Current 200% 36Vd.c. 35A 32Vd.c. 35A 50Vd.c. 50A 32Vd.c. 50A Interrupting Rating Time/Current Characteristics 55 125 2012 Inch 0805 Style Code Rated Current A 501 631 801 102 132 162 202 252 FCC20 0.5 0.63 0.8 1.0 1.25 1.6 2.0 2.5 270 190 130 100 80 65 55 40 501 631 801 102 132 162 202 252 Interrupting Rating Time/Current Characteristics Rated Current 200% 50Vd.c. 50A *Recommended Derating for Rated Current Ex.) If FCC16 102AB (Rated Current:1.0A) is used under ambient temperature 70C, Kamaya recommends, less than the current value derated as below, Rated Current1.0A (Nominal Derating : 70% Temperature Derating : 100%) =0.7A 55 125 Opening Time 120s max. Temperature Derating 100 Nominal Derating Option Code AD:Nominal Derating 80% of Rated Current Option Code AB,LB:Nominal Derating 70% of Rated Current Temperature Derating Please refer to the following graph regarding the current derating value for ambient temperature. Working Temperature Range C Percentage of the rated current(%) Size Working Temperature Range C Rated Current 200% Opening Time 5s max. 30Vd.c. 35A *Rating/Option Code : AA (Fast-Acting type) Metric -55125 Opening Time 5s max. 0 -55 Number Description *Part Example 70 125 Ambient Temperature(C) Style FCC Product Type FCC FHC 20 Code 10 16 20 32 Size Metric 1005 1608 2012 3216 202 AD Rated Current Inch 0402 0603 0805 1206 e.g. : 501=0.5A 132=1.25A 3-Digit 202=2.0A Code AD AB LB AA Option Code Clearing Time Within 5s under 250% of Rated Current Within 5s under 200% of Rated Current Within 120s under 200% of Rated Current TP * Packaging & Standard Qty. (Min.) Bulk (Loose Package) 1,000pcs. All Styles Press-Pocket FCC10 PA Paper Tape (2mm pitch) 10,000pcs. FHC10 FCC16 FHC16 TP Paper Tape 5,000pcs. FCC20 FHC20 FCC32 FHC32 TH Paper Tape (2mm pitch) 10,000pcs. FCC10(LB) B *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 13 Chip Fuses Circuit Protection http://www.kamaya.co.jp NEW FCCR10 *Features Halogen Free Antimony Free Pb Free Suitable for over-current protection of the circuit of miniature portable equipment. Low internal resistance compared with FCC10AB series for low power consumption and voltage dropping. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Certified UL, c-UL. File No. : E176847 *Dimensions Current value is marked on the cover coating. Please refer to Ratings table as below. W L c d d Metric Inch L W H c d *Unit weight/pc. FCCR10 1005 0402 1.00.05 0.50.05 0.40.05 0.20.1 0.250.10 0.8mg *Values for reference H c Unit : mm Style *Ratings/Option Code : AB (Fast-Acting type) Size Metric 1005 0402 Rated Current Code A Style Inch FCCR10 Internal Resistance m ohm max. Mark 151 0.15 1850 201 0.2 1250 Z 251 0.25 880 C 321 0.315 600 D 401 0.4 400 E 501 0.5 300 F Interrupting Rating Time / Current Characteristics Working Temperature Range C 24Vd.c. 35A Rated Current 200% Opening time 5s Max. 55 125 *Recommended Derating for Rated Current Temperature Derating 100 75% of Rated Current Temperature Derating Please refer to the following graph regarding the current derating value for ambient temperature. Ex.) If FCCR10 501AB (Rated Current:0.5A) is used under ambient temperature 70C, Kamaya recommends, less than the current value derated as below, Rated Current : 0.5A (Nominal Derating : 75% Temperature Derating : 100%) = 0.375A Percentage of the rated current(%) Nominal Derating Nominal Derating 0 -55 70 Ambient Temperature(C) Number Description *Part Example Style FCCR 10 151 Product Type FCCR AB PA Rated Current e.g. :151=0.15A 321=0.315A 3digit 501=0.5A B * Packing & Standard Qty. (Min.) Bulk (Loose Package) 1,000pcs. PA Press-Pocket Paper Tape(2mm pitch) 10,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Size Code Metric 10 1005 14 Inch 0402 Option Code Code Clearing Time AB Within 5s under 200% of Rated Current Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 125 Chip Fuses Circuit Protection http://www.kamaya.co.jp Option Code : AB / Low Ohm & Fast Acting Option Code : AH / In- rush Withstand FMC16 *Features Halogen Free Antimony Free Pb Free Option code : AB / Low internal resistance compared with FCC/FHC16 AB series for low power consumption and voltage dropping. Option code : AH / High anti pulse perfomance. Please contact Kamaya Sales Dept, if you need to confirm Inrush current endurance, Anti-pulce performance etc. We can provide Application Guide for FMC16 selection. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Certified UL, c-UL. File No. : E176847 *Dimensions L Current value is marked on the cover coating. Please refer to Ratings table as below. W F c Metric Inch L W H c d FMC16 1608 0603 1.60.1 0.8 0.15 -0.05 0.450.10 0.30.15 0.30.1 *Unit weight/pc. H c Unit : mm Style d d *Ratings/Option Code : AB (Fast-Acting type) Size Metric 1608 Rated Current Code A Style Inch 0603 501 751 102 132 152 202 252 302 402 502 FMC16 Internal Resistance m ohm max. Mark 260 140 110 80 65 45 32 26 18 14 F A L M H S T R X Y 32Vd.c. 35A Internal Resistance m ohm max. Mark Interrupting Rating 400 300 210 180 115 90 70 60 50 37 28 26 18 14 HF HI HA HK HL HM HH HN HS HT HR HU HX HY 0.5 0.75 1.0 1.25 1.5 2.0 2.5 3.0 4.0 5.0 *Ratings/Option Code : AH (Fast-Acting type) Size Metric 1608 2mg *Values for reference Rated Current Code A Style Inch 0603 501 631 751 801 102 132 152 162 202 252 302 322 402 502 FMC16 0.5 0.63 0.75 0.8 1.0 1.25 1.5 1.6 2.0 2.5 3.0 3.15 4.0 5.0 Interrupting Rating 100% 200% 300% 4h Min. 5s Max. 0.2s Max. Electrical Characteristics 55 125 Working Temperature Range C Rated Current Opening time 100% 200% 300% 32Vd.c. 35A 4h Min. 5s Max. 0.2s Max. 55 125 130 120 Nominal Derating Temperature Derating Please refer to the following graph regarding the current derating value for ambient temperature. Ex.) If FMC16 102AB (Rated Current 1.0A) is used under ambient temperature 70C, Kamaya recommends, less than the current value derated as below, (Nominal Derating : 75% Temperature Derating : 80%) = 0.6A Percentage of the rated current(%) 110 75% of Rated Current Rated Current : 1.0A Working Temperature Range C Rated Current Opening time *Recommended Derating for Rated Current Nominal Derating Electrical Characteristics 100 90 80 70 60 50 40 30 20 10 0 Number Description *Part Example -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110 120130 Ambient Temperature(C) Style FMC 16 252 Product Type FMC AB TP Rated Current e.g. :102=1.0A 132=1.25A 3digit 252=2.5A Size Code Metric 16 1608 Inch 0603 * Packing & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TP Paper Tape 5,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Option Code Code Clearing Time AB Rated Current 200% 5s max. AH Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 15 Chip Fuses Circuit Protection http://www.kamaya.co.jp NEW FMC10 *Features Halogen Free Option Code : AB / Low Ohm & Fast Acting Antimony Free Pb Free Features Suitable for over-current protection of the circuit of miniature portable equipment. Low internal resistance compared with FCC/FHC 10AB Series. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Certified UL, c-UL. File No. : E176847 *Dimensions L Unit : mm Style Metric Inch L W H c d *Unit weight/pc. FMC10 1005 0402 1.00.05 0.50.05 0.380.05 0.20.1 0.250.10 0.6mg W F Current value is marked on the cover coating. Please refer to Ratings table as below. c d d *Values for reference H c *Ratings/Option Code : AB (Fast-Acting type) 1005 Inch 0402 Rated Current Code A Style 501 751 102 132 152 202 252 302 FMC10 Internal Resistance m ohm max. Mark 240 140 95 73 60 41 32 25 F A L M H S T R 0.5 0.75 1.0 1.25 1.5 2.0 2.5 3.0 Interrupting Rating Electrical Characteristics Working Temperature Range C Rated Current Opening time 100% 200% 300% 24Vd.c. 35A *Recommended Derating for Rated Current 4h Min. 5s Max. 0.2s Max. 55 125 130 120 Nominal Derating Nominal Derating m 75% of Rated Current Temperature Derating Please refer to the following graph regarding the current derating value for ambient temperature. Ex.) If FMC10 102AB (Rated Current 1.0A) is used under ambient temperature 70C, Percentage of the rated current(%) Size Metric Kamaya recommends, less than the current value derated as below, 110 100 90 80 70 60 50 40 30 20 Rated Current : 1.0Au (Nominal Derating : 75%uTemperature Derating : 80%) = 0.6A 10 0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110 120130 Ambient Temperature(C) Number Description *Part Example Style FMC Product Type FMC 10 10 Size 1005 501 AB Rated Current e.g. :501=0.5A 132=1.25A 3digit 302=3.0A TH * Packing & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TH Paper Tape 10,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Option Code Code Clearing Time AB Rated Current 200% 5s max. 16 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Chip Fuses Circuit Protection http://www.kamaya.co.jp SBF32 *Features Halogen Free Slow Blow Antimony Free Pb Free Slow Blow ensure high anti pulse performance. Please contact Kamaya Sales Dept, if you need to confirm Inrush current endurance, Anti-pulce performance etc. We can provide Application Guide for SBF32 selection. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. Certified UL, c-UL. File No. : E176847 *Dimensions L W S40 c Current value is marked on the cover coating. Please refer to Ratings table as below. c Unit : mm Style Metric Inch L W H c d SBF32 3216 1206 3.20.2 1.60.15 0.650.10 0.50.25 0.50.25 *Unit weight/pc. 10mg H *Values for reference d d *Opton Code:AS(Slow Blow type) Size Metric 3216 Style Inch 1206 Rated Current Code A SBF32 Internal Resistance m ohm typ. Mark Interrupting Rating Electrical Characteristics 102 1.0 130 S10 132 1.25 94 S13 152 1.5 68 S15 202 2.0 40 S20 252 2.5 30 S25 x100 4h 302 3.0 24 S30 x200 1s 402 4.0 15 S40 502 5.0 12 S50 602 6.0 10 S60 702 7.0 7 S70 802 8.0 6 S80 63Vd.c. 50A Rated Current 32Vd.c. 50A 0.02s 3.0s x800 0.0015s 0.05s -55125 120 Temperature Derating Please refer to the following graph regarding the current derating value for ambient temperature. Ex.) If SBF32 102AS (Rated Current 1.0A) is used under ambient temperature 70C, Kamaya recommends, less than the current value derated as below. (Nominal Derating : 75% Temperature Derating : 80%) = 0.6A Percentage of the rated current(%) 110 75% of Rated Current Rated Current : 1.0A 120s 130 Nominal Derating Nominal Derating Opening time Min. Max. x300 *Recommended Derating for Rated Current Working Temperature Range C 100 90 80 70 60 50 40 30 20 10 0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110 120130 Ambient Temperature(C) *Part Number Description Example Style SBF 32 402 Product Type SBF AS Rated Current e.g. :252=2.5A 402=4.0A 802=8.0A Size Code Metric 32 3216 Inch 1206 3digit TP Packing & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TP Paper Tape 5,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Option Code Code Clearing Time AS Rated Current 200% : 1s min120s. max. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 17 Chip Fuses Circuit Protection http://www.kamaya.co.jp Support of Chip Fuse Selection We would like to support the customer to find the appropriate Kamaya chip fuse it the following condittions of usage are provided. Please contact kamaya Sales Dept for details. The item you would like to check. Circuit Voltage:Max voltage value of circuit mounting fuses. Steady-State Current:Current value flown fuses on normal condition. Ambient Temperature:Temperature around fuses. Wave form (In-rush Current)It rapidly flows on circuit when power supply is turned on. Messrs *** Verification of Chip Fuse Application Item for examination Series Size OP Code **/**/20** Kamaya Electric Co., Ltd. Hokkaido Research Center Confirmations for Rush #1 No.HR2TGF05****** Application Nominal Ambient Abnormal 15 20 0.2 70 1 0 t1 Amount Amp. 0.5 A Fusing 200%, 5s Interrupting 24 Vd.c. 35A 75% 100% 100 Percentage of the rated current(%) Confirmation for Derating Nominal Derating Temperature Derating 0.00002 3A 1 s Note. Standing Pulse 100k times 90A^2 * us Confirmation of Rush #1 #2 #3 #4 #5 Temperature Derating 5 us 10 us 20 us Joule Integral Items Condition Spec Judgment 15Vd.c. 24Vd.c. OK 20A 35A OK t1 t2 t3 t2 t3 Joule Integral Confirmation for Interrupting Voltage Current Im Im V d.c. A A Max. deg.C Max A Item for recommend Size 1005 0 Operating condition FCCR 1005 (mm) AB P/N FCCR10501AB Num of wave Trapezoidal waveform FCCR 10 501 AB Size 1005 Current Fusing 0.5A 200%, 5s Recommended Item Note Standing Pulse 100k times FCCR10501AB 0.01 0 -55 FCCR10501AB 70 125 Basis of selection #1 #2 0.2666667 A Min. 0.5 A Max. Joule Integral I2t (A^2s) Ambient Temperature(C) 0.001 Your Waveform 0.0001 0.00001 0.000001 0.000001 0.00001 0.0001 Time t (s) We can provide Application Guide for Fuses selection. 18 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 0.001 0.01 Chip Fusible Resistors Circuit Protection http://www.kamaya.co.jp FRC Halogen Free *Features *Dimensions Antimony Free Suitable for battery circuit and power supply circuit. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. L Rated resistance value is marked with 3-digit on the over coating W Style FRC16 FRC20 FRC32 Metric 1608 2012 3216 L 1.60.1 2.00.1 3.20.2 Inch 0603 0805 1206 Unit : mm W 0.8 0.15 0.05 1.250.10 1.6 0.15 H 0.450.10 0.6 0.1 0.6 0.1 c 0.30.1 0.40.2 0.50.25 d 0.30.1 0.40.2 0.50.25 *Unit weight/pc. 2.2mg 6mg 10mg *Values for reference c d d H c *Ratings Size Metric (Inch) 1608 (0603) Style FRC16 FRC32 Temperature Coefficient Preferred Number Fusing Characteristic Series for of Resistance Applied Power Fusing Time Resistors 10-6/C 3.951 0.063 2012 (0805) 3216 (1206) FRC20 Note1. Note2. Note3. Note4. Rated Dissipation Rated Resistance Tolerance on Rated Resistance W Range 0.1 1.89W J(5%) 151 151 56100 0.125 Maximum Category Temperature open-circuit Range voltage C 1,000 2.0W E24 30s max. 55 125 50V 2.5W 500 Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Contact us for further information on other style, resistance and pre-arcing time-current characteristic than those mentioned above. Contact us for information when inrush and surge voltage are supposed to be applied. Maximum open circuit voltage is the value of voltage applicable to both ends of resistors,when a resister is open condition in a circuit. This voltage shall be corresponding to 1,000 times the rated dissipation or maximum open circuit which is the less severe. Number Description *Part Example Style FRC 20 C 2A 100 J TP Tolerance on Rated Resistance J 5% Product Type Fusing Characteristics standard C Size Code Metric 16 1608 20 2012 32 3216 Rated Resistance E24series ex.:100=10 * Packing & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. 5,000pcs. TP Paper Tape Size Rated Dissipation 16 1J 0.063W 20 2A 0.1W 2B 32 0.125W Inch 0603 0805 1206 *Refer to Tape and Packaging information on pages 22 and 23. *Example of Typical Fusing Characteristics FRC16 FRC20 100 10 10 1 0.1 0.1 0.01 0.001 0.001 0 1 2 3 Power (W) 4 5 10 1 0.01 0.0001 0 Rated Resistance : 51 ohm 100 Fusing Time (s) 100 0.0001 FRC32 Rated Resistance : 1 ohm 1000 Fusing Time (s) Fusing Time (s) Rated Resistance : 10 ohm 1000 1 0.1 0.01 0.001 1 2 3 4 Power (W) 5 0.0001 0 1 2 3 4 Power (W) 5 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 19 ESD Suppressors Circuit Protection http://www.kamaya.co.jp SPC10 *Features Halogen Free Antimony Free Pb Free Low capacitance 0402inch: 0.1pF Max. Suitable for ESD protection of High Speed data lines. High ESD Withstand, IEC61000-4-2 Lv4 8kV Contact Discharge Major application *PC, PC related equipment and peripherals *Mobile Phone, PDA, Small portable devices *Digital Video Camera, Digital Still Camera *LCD TV, PDP TV, STB *Game equipment etc. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions L W Unit : mm Style Metric Inch L SPC10 1005 0402 1.00.05 W H c 0.50.05 0.350.05 d *Unit weight/pc. 0.20.1 0.250.10 0.6mg *Values for reference c d d Circult H c *Ratings Part Number SPC10 Size Metric (Inch) Capacitance pF 1005 (0402) 0.1 Max. Note.4 ESD Characteristics Note.1 Note.2 Peak Voltage Code V 501 500 Max. Note.3 Clamp Voltage V ESD pulse withstand Pulses 100 Max. 100 Min. Note.5 Note.6 Rated votage V Leakage current A Category Temperature Range C 30 Max. 1 Max. 55 125 Note1. Capacitance : Measured at 25, 1MHz, 1V rms. Note2. Peak voltage : Measured at IEC61000-4-2 8kV Contact Discharge. Note3. Clamp voltage : Measured at IEC61000-4-2 8kV Contact Discharge, at 30ns. Note4. Rated Voltage : The value of voltage that is applicable to each terminal of ESD suppressor without operation of suppressor. Note5. Leakage Current : The value of current that ESD suppressor is impressed at rated voltage. Note6. Category Temperature Range : Working Temperature Range of ESD suppressor. Number Description *Part Example Style SPC 10 501 Product Type SPC Size Code Metric 10 1005 20 Peak Voltage Code Peak Voltage 500V 501 Inch 0402 01 A Code 01 Rated Voltage Code Rated Voltage A 30V max. TH Option Code Option Code Capacitance 0.1pF max. * Packing & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TH Paper Tape (2mm pitch) 10,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS ESD Suppressors Circuit Protection http://www.kamaya.co.jp NEW HSPC16 *Features Halogen Free Antimony Free Pb Free High ESD protection performance(15kV) for automotive (Tight ESD spec requirement) IEC61000-4-2 Air Discharge: 15kV Major application Car audio, Car Navigation System etc. Video Camera, DSC, Desk top-PC. Note PC etc. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions L W Unit : mm Style Metric Inch L W HSPC16 1608 0603 1.60.1 0.8 -0.05 0.15 H c d *Unit weight/pc. 0.50.10 0.30.1 0.30.1 2mg *Values for reference c d d Circult H c *Ratings Style HSPC16 Size Metric (Inch) Capacitance pF 1608 (0603) 0.2 Max. Note.4 ESD Characteristics Note.1 Note.2 Peak Voltage Code V 701 700 Max. Clamp Voltage V Note.3 ESD pulse withstand Pulses 100 Max. 100 Min. Note.5 Note.6 Rated votage V Leakage current A Category Temperature Range C 20 Max. 1 Max. 55 125 Note1. Capacitance : Measured at 25, 1MHz, 1V rms. Note2. Peak voltage : Measured at IEC61000-4-2 15kV Air Discharge. Note3. Clamp voltage : Measured at IEC61000-4-2 15kV Air Discharge, at 30ns. Note4. Rated Voltage : The value of voltage that is applicable to each terminal of ESD suppressor without operation of suppressor. Note5. Leakage Current : The value of current that ESD suppressor is impressed at rated voltage. Note6. Category Temperature Range : Working Temperature Range of ESD suppressor. Number Description *Part Example Style HSPC 16 701 Product Type HSPC Peak Voltage Code Peak Voltage 700V 701 Size Code Metric 16 1608 Inch 0603 02 B Code 02 Rated Voltage Code Rated Voltage B 20V max. TP Option Code Option Code Capacitance 0.2pF max. * Packing & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. TP Paper Tape 5,000pcs. *Refer to Tape and Packaging information on pages 22 and 23. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 21 Packaging for SMD http://www.kamaya.co.jp Packaging for Surface Mount Devices Label A * Reel Dimensions A B C G H Label B D E Unit : mm Code Shoot molding PA,TH,TP,TE Plastic Reel (8 mm width) (EIAJ ET-7200B) Vacuum molding TE(12 mm width) A 180 B 0 -1.5 60 C +1 0 E 11.41.0 13.01.0 17.01.0 D 130.2 9 +1.0 0 13 +1.0 0 G H 20.5 210.8 -- *Dimension A : Please contact KAMAYA for plastic reels of 250mm and 330mm. Dimensions *Tape PA TH (Cavity pitch : 2mm) (Unit : mm) 1.5 +0.1 -0 TP t TE (Cavity pitch : 4mm) 1.5 +0.1 -0 C t 2.00.05 B B A t1 t2 Pulling direction *Please contact Kamaya sales department for 1mm pitch cavity taping. Metric Inch 0402 0603 01005 0201 RMC1/32, RGC1/32 RMC1/20, RGC1/20, RCC06, RNC06 FCC10, FHC10, FCCR10 Style 1005 0402 RMC1/16S, RGC1/16S, RLC10, RCC10, FCC10(LB), FMC10, SPC10 RMC1/16 1608 2012 0603 0805 3216 1206 RMC1/8, RGC1/8, FCR1/8, RNC32, RVC32 RPC32, RLC32, LTC1/8, FCC32, FHC32 SBF32, FRC32, RCC32 RLP32 3225 1210 RMC1/4, FCR1/4, RPC35, RLC35 2010 RMC1/2, FCR1/2, RVC50, RPC50, RZC50 RLC50, RLS50 5025 6332 2512 Chip Networks Chip Attenuators 22 t1 Code PA TH RMC1/16, RGC1/16, FCR1/16, RVC16 RLC16, RHC16, RCC16, RLP16 FCC16, FHC16, FMC16, FRC16, HSPC16 RMC1/10, RGC1/10, FCR1/10, RNC20 RVC20, RPC20, RLC20, RHC20, LTC1/10 FCC20, FHC20, FRC20, RCC20 RLP20 RMC1, FCR1, RVC63, RPC63, RZC63 RLC63, RLS63, RLP63, MLP63 RAC101A RAC102D A A 0.3max. B C W E 0.240.03 0.450.03 4.00.05 0.370.05 0.670.05 4.00.05 0.650.10 1.150.10 Pulling direction t1 t2 t 0.310.03 0.150.02 0.360.03 0.420.03 0.270.02 0.450.05 0.60.05 0.50.05 0.7 max. 0.65 +0.05 -0.10 1.15 +0.05 -0.10 0.40.05 - 0.5 max. 1.150.15 1.90.2 0.60.1 - 0.8 max. 1.150.15 1.90.2 0.60.1 - 0.8 max. 8.00.2 1.650.15 3.50.05 0.80.1 2.50.2 TP 2.00.15 3.60.2 2.850.20 3.50.2 3.10.2 5.50.2 - 0.60.1 4.00.1 0.80.1 1.0 max. - 0.60.1 8.00.3 TE TH RAC104D RAC164D, RAC168U RAC168D 1.750.1 W 1.750.1 E C W t 2.00.05 E t t1 TP 120.3 3.60.2 6.90.2 1.15 +0.05 -0.10 1.15 +0.05 -0.10 1.20.1 2.20.1 1.90.15 1.90.15 3.60.2 4.10.15 - - - - - - 5.50.05 1.10.15 +0.05 -0.10 - 0.40.1 - 0.60.1 - - 0.4 4.00.1 8.00.2 8.00.3 3.50.05 1.00.2 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 0.55 max. 0.5 max. 0.8 max. Packaging for SMD http://www.kamaya.co.jp PACKAGING FOR SURFACE MOUNT DEVICES *Bulk Case (Code : BA) (Unit : mm) Slider 12 *Standard Packaging Quantities 36 Size Shutter Metric 1608 2012 3216 Bulk case (pcs./case) Inch 0603 0805 1206 25,000 10,000 5,000 110 *Standard Packaging Quantities (Minimum Units) Metric Inch Style 0402 01005 RMC1/32, RGC1/32 0603 0201 RMC1/20, RGC1/20, RCC06, RNC06 FCC10, FHC10, FCCR10 1005 0402 RMC1/16S, RGC1/16S, RLC10 RCC10, FMC10, SPC10 Code M. P. Q. (pcs./reel) Tape & Reel Outer Carton Reel Q' ty (pcs.) Gross Weight (kg) 20,000 PA 15,000 8.8 7.8 10,000 6.0 2012 0603 0805 7.2 50 TP 8.4 5,000 RMC1/8, RGC1/8, FCR1/8 RNC32, RVC32, RPC32, RLC32, LTC1/8, FRC32, RCC32 8.8 3216 1206 RLP32, FCC32, FHC32, SBF32 10.0 3225 1210 RMC1/4, FCR1/4, RPC35, RLC35 7.7 2010 RMC1/2, FCR1/2, RVC50, RPC50 RZC50, RLC50, RLS50 5025 6332 2512 RMC1, FCR1, RVC63, RPC63, RZC63 RLC63, RLS63 Chip Networks Chip Attenuators 0.027 1,000 8.0 TE 4,000 40 10.4 12.0 RLP63, MLP63 RAC102D, RAC101A RAC104D RAC164D, RAC168U RAC168D Q' ty (pcs.) 8.3 RMC1/16, RGC1/16, FCR1/16 RVC16, RLC16, RHC16, RCC16, RLP16 FCC16, FHC16, FMC16, FRC16, HSPC16 RMC1/10, RGC1/10, FCR1/10, RLP20 RNC20, RVC20, RPC20, RLC20, RHC20 LTC1/10, FCC20, FHC20, FRC20, RCC20 Measurement (m3) TH RMC1/16 1608 Bulk TH 6.0 10,000 50 TP 5,000 6.3 7.7 8.6 5,000 Please contact Kamaya Sales department about bulk package of RLP16, RLP20, RLP32, RLP63, MLP63 . Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 23 Leaded Resistors Pulse http://www.kamaya.co.jp RC1/2U *Features UL recognized component(UL1676) (File No.E151897). Reduce UL or CSA approval and maintenance cost. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. UL recognized component (UL1676) (File No.E151897) *Dimensions C US d Unit : mm H D H L Style RC1/2U L 9.5 +0.8 0.7 H 283 D 3.60.2 d 0.7 +0.07 0.05 *Unit weight/pc. 422mg *Value for reference *Ratings Rated Dissipation at 70C W Style Rated Voltage V *Part Number Description Tolerance on Rated Resistance and Rated Resistance Specified Line Perferred Number Series Range Voltage for Resistors. Isolation Voltage V Example Category Temperature Range C Style K(10%) E12 0.5 RC1/2U 350 250Va.c. max. or 125Va.c. max. 1M ohm10M ohm RC 1/2U Product Type Rated Dissipation 1/2U 0.5W 55 125 500 685 M Rated Resistance Tolerance on Rated Resistance K 10% M 20% E12, 6 Series e.g. : 685=6.8M ohm 106=10M ohm B M(20%) E6 B H TB TD *Packaging Bulk (straight) Horizontal Forming 52 mm Width Tape (Ammo Box) 52 mm Width Tape (Reel) *Refer to Tape and Packaging information on pages 25. Note1. Required characteristic performance is based on JIS C 6406 and UL 1676. Note2. The name of this, product is granted as Conductive Path, but UL1676 and the requirements as Discharge Path shown in CSA22, 2 No,1-94 are satisfied, but the products performance does not cover all the requirements as Conductive Path. *Color Coding Fifth color band: Green (Symbol of UL approved component) Fourth color band: Resistance tolerance; K or M (In the case of M: Nil color band) Third color band (Multiplier) Second color band Rated Resistance (Second significant figure) First color band (First significant figure) RC *Features Improved pulse endurance characteristics compared to carbon-film devices. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions d Unit : mm H D H L Style RC1/4 RC1/2 L 6.3 0.7 9.5 +0.8 0.7 D 2.40.1 3.60.2 H 303 283 d *Unit weight/pc. 222mg 0.6 0.05 422mg 0.7 +0.07 0.05 *Values for reference *Ratings Style RC1/4 RC1/2 Combination of Rated Resistance Range and Temperature Coefficient of Resistance Rated Dissipation Limiting Element Rated Resistance Tolerance on Rated Resistance and Temperature Coefficient of Resistance % at 70C Voltage Rated Resistance Range Perferred Number Series for Resistors W V Range at -55 C at +125 C 0.25 0.5 250 350 1 ohm~5.6M ohm 1 ohm~22M ohm +6.5 ~0 +1~ -5 1 ohm ~ 1k ohm +10 ~0 0~ -6 1.1k ohm ~ 10k ohm +13 ~0 0~ -7.5 11k ohm ~100k ohm +15 ~0 0~ -10 110k ohm ~ 1M ohm +20 ~0 0~ -15 1.1M ohm ~ 22M ohm J ( 5%) : E24 K ( 10%) : E12 M( 20%) : E6 Isolation Voltage V Category Temperature Range C *Part Number Description 24 Style RC 1/4 102 J B Product Type Rated Dissipation 1/4 0.25W 1/2 0.5W Rated Resistance Tolerance on Rated Resistance J 5% K 10% M 20% *Packaging 100 -55~+125 500 Note1. Rated Voltage = (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. *Storage Example E24, 12, 6 Series e.g. : 2R2=2.2 ohm 102=1k ohm Temperature 2015C, Humidity 60%R.H. Max, Recommendation Storing Term 6 months after shipped from factory. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS B H TB TD Bulk (Straight) Horizontal Forming 52 mm Width Tape (Ammo Box) 52 mm Width Tape (Reel) *Refer to Tape and Packaging information on pages 25. Leaded Resistors High Voltage http://www.kamaya.co.jp RH *Features Most suitable resistor for high-tension circuits in which high precision is required for example, the physical and chemical measurement equipment, X-ray apparatus, electron microscope, and etc. Please refer to Specification (Reference) at the Website to confirm the specification for more detail. *Dimensions Unit : mm d H D H L *Dimension "L" should be measured between both side of D/2. Style L D H d *Unit Weight/pc. RH 1 14.51.0 4.01.0 383 0.8 950mg RH 2 26.51.0 5.01.0 383 1.0 1,950mg RH 3 39.02.0 5.01.0 383 1.0 2,410mg RH 4 52.02.0 9.01.0 383 1.0 6,880mg RH 6 77.02.0 9.01.0 383 1.0 9,290mg RH 8 97.02.0 9.01.0 383 1.0 11.46g Note. Please contact KAMAYA for the details of marking. *Ratings Style Combination of Temperature Coefficient of Resistance and rated Resistance Range Rated Dissipation W Limiting Element Voltage kV Maximum Overload Voltage kV Pulse Voltage kV RH 1 1.0 1.5 4 4 RH 2 2.0 5 12.5 7.5 RH 3 3.0 10 25 15 RH 4 4.0 15 30 Rated Resistance Range M ohm F ( 1%) 6.0 20 40 30 RH 8 8.0 30 60 40 *Part Number Description Example Style 20 RH 6 *Values for reference Tolerance on Rated Resistance Temperature Coefficient of Resistance 10-6/C 1R500 100 G ( 2%) 500<R5,000 200 J ( 5%) K (10%) RH 8 D 500M J Product Type Rated power 1 1.0W 2 2.0W 3 3.0W 4 4.0W 6 6.0W 8 8.0W * Temperature Coefficient of Resistance K 100x10-6/C D 200x10-6/C Rated Resistance Available on demand Tolerance on Rated Resistance F 1% G 2% J 5% K 10% Note1. Rated Voltage= (Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. e.g.: 100M=100M ohm 1G00=1G ohm *Marking and label indication for Temperature Coefficient Resistance HVD : 100x10-6/C HVS : 200x10-6/C B Packaging B Bulk Packaging for Leaded Resistors * * Tape Ammo Box a Unit : mm P Z Style S L1 W L1-L2 T t P Z S RC1/4 RC1/2 52.4 1.6 -1.4 1.0max. 6.00.5 0.5max. 5.080.38 1.0max. 3.2min. RC1/2U L2 W b c Indication label Window Indication T t * Tape & Reel (Code : TD) C1 C2 d a RC1/4 TB 52mm Width Tape 605 RC1/2 RC1/2U b 755 Unit : mm A RC1/4 RC1/2 TD 2605 280 755 60.41 781 14.50.5 3 RC1/2U RC1/4 H60 10.00.5 RC1/4 H62 12.50.5 RC1/2 RC1/2U H 15.00.5 B C1 C2 d B Code *A' A t A *Value for reference Y 4555 Horizontal Forming (Code : H) Style Code c 2755 655 *Y Style B Code * Unit : mm A A' Unit : mm Style B t 1.5max. 5.00.5 1.8max. Label indication Tape & Reel Ammo Box Outer Carton Bulk Packaging Outer Carton Style Q'ty / Reel (pcs.) Reel Size (mm) Q'ty / Carton (pcs.) Gross Weight (kg) Measurement (m3 ) RC1/2U 3,000 260 24,000 13 RC1/2 3,000 260 24,000 RC1/4 5,000 260 40,000 M.P.Q. Q'ty / Plastic Bag pcs. ( ) Q'ty / Inner Carton (pcs.) Outer Carton Width of Taping (mm) Q'ty / Box (pcs.) 0.04 52 2,000 30,000 16 0.05 500 100x5 5,000 30,000 13 0.04 13 0.04 52 2,000 30,000 16 0.05 500 100x5 5,000 30,000 13 0.04 12 0.04 52 2,000 30,000 10 0.03 1000 200x5 10,000 50,000 13 0.04 Q'ty / Carton (pcs.) Gross MeasureWeight ment (kg) (m3 ) Q'ty / Carton (pcs.) Gross MeasureWeight ment (kg) (m3 ) Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 25 Capacitors http://www.kamaya.co.jp Multilayer Ceramic Capacitor Please see Catalog of Walsin Technology Corporation. (Website: http://www.passivecomponent.com/) for detail information. *Features 1. General purpose, Board of PC etc. 2. Full support by Japanese Quality Assurance team. * Dimensions Metric Inch 1005 0402 1608 0603 2012 0805 L 1.0 0.05 1.6 0.1 1.60.15/-0.1 L T 1632 0612 2.0 0.15 2.0 0.2 3.2 0.15 W 0.5 0.05 0.8 0.1 0.80.15/-0.1 1.250.1 1.250.2 1.6 0.15 W MB MB 3.2 0.15 3216 1206 1.6 0.15 T/Symbol 0.5 0.05 0.8 0.07 0.80.15/-0.1 0.6 0.1 0.8 0.1 B 1.250.1 D # 0.95max. 1.250.2 0.8 0.1 T # I # B 0.8 0.1 B 0.95max. T # 0.950.1 C 1.150.15 3.2 0.2 1.6 0.2 N S X A J # 1.25max. 1.6 0.15 1.250.1 D # 1.6 0.2 1.6 0.2 G # 1.60.3/-0.1 1.60.3/-0.1 0.95max. P # T # 0.950.1 C # 3.2 0.15 3.20.3/-0.1 3.2 0.3 3225 2.5 0.2 1210 3.2 0.4 4520 1808 4532 1812 4.5 0.4 4.5 0.4 2.5 0.3 1.250.1 D # 1.6 0.2 G # 2.5 0.3 M # 1.250.1 D # 2.0 0.2 K # 1.250.1 D # 2.0 0.2 K # 2.030.25 3.2 0.3 *Characteristic Application Series Dielectric Size Rated Voltage 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1812(4532) 16V, 25V, 50V, 100V 0.5pF1uF High Capacitance X7R, X5R, Y5V 0402(1005) 0603(1608) 0805(2012) 1206(3216) 1210(3225) 1812(4532) 6.3V, 10V, 16V, 25V, 50V 1uF100uF NPO, X7R, Y5V 0805(2012) 1206(3216) 1210(3225) 1812(4532) 200V, 250V, 500V, 630V 1kV, 1.5kV, 2kV, 3kV 0.5pF0.22uF Middle & High Voltage Example General purpose High Capacitance Ultra-small Middle & High Voltage Low Inductance Style B 104 Size Inch (Metric) Dielectric N=NPO B=X7R X=X5R F=Y5V Capacitance R470.47pF 0R50.5pF 1R01pF 10010pF 101100pF 1021000pF 1030.01uF 1040.1uF 1051uF 10610uF 107100uF 26 Low profile Open-mode Design High Q Low ESR Microwave Safety certified Style 0805 02010603 04021005 06031608 08052012 12063216 12103225 18084520 18124532 Capacitance NPO, X7R, Y5V *Part Number Description Example Unit: mm Series General Purpose, High Capacitance, MW, HH General Purpose, High Capacitance, MW, HH General Purpose, High Capacitance General Purpose, High Voltage General Purpose, High Capacitance, High Voltage OP General Purpose, High Capacitance, High Voltage OP TT High Capacitance Low Inductance General Purpose, High Voltage OP TT General Purpose, High Capacitance, High Voltage OP General Purpose High Capacitance TT General Purpose, High Capacitance, High Voltage OP General Purpose, High Capacitance, High Voltage OP General Purpose, High Capacitance TT General Purpose, High Voltage OP General Purpose, High Voltage OP General Purpose, High Voltage OP High Voltage S2, S3 High Voltage S2, S3 High Voltage General Purpose, S2, S3 OP General Purpose, S2, S3 OP # : Reflow soldering process only. General Purpose General Purpose Safety and Power supply control MB 0.250.05/-0.1 0.4 0.15 0.4 0.15 0.5 0.2 0.5 0.2 0.4 0.2 0.5 0.2 0.4 0.2 0.5 0.2 0.5 0.2 0.13max. 0.6 0.2 0.5 0.2 0.6 0.2 0.6 0.2 0.5 0.2 0.6 0.2 0.6 0.2 0.6 0.2 0.6 0.2 0.5 0.2 0.6 0.2 0.5 0.2 0.6 0.2 0.750.25 0.750.25 0.5 0.25 0.750.25 0.5 0.25 0.750.25 0.5 0.25 0.750.25 0.5 0.25 0.750.25 0.5 0.25 0.750.25 0.750.25 0.6 0.25 0.750.25 0.6 0.25 K Tolerance A 0.05pF B 0.1pF C 0.25pF D 0.5pF F 1% G 2% J 5% K 10% M 20% Z -20to80% 500 C T OP 21 Rated Voltage 6R36.3 Vdc 10010 Vdc 16016 Vdc 25025 Vdc 50050 Vdc 101100 Vdc 201200 Vdc 251250 Vdc 501500 Vdc 631630 Vdc 1021000 Vdc 1521500 Vdc 2022000 Vdc 3023000 Vdc Electrode L = Ag/Ni/Sn C= Cu/Ni/Sn Package B= Bulk C= Bulk case T= 7Inch width Reale Product Type TT OP HH MW S2 S3 Size 15=0402 18=0603 21=0805 31=1206 32=1210 42=1808 43=1812 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Capacitors http://www.kamaya.co.jp Film Capacitors *Dipped metallized film capacitors *CR Units Film Capacitors Summary Style Summary Series Code Features Rated Voltage Temp. Range () NEW Small in size 250VDC 450VDC 630VDC 0.4710 0.224.7 0.0682.2 -40 85 (105) MDX Standard 250VDC 450VDC 630VDC 0.0110 0.014.7 0.012.2 -40 85 (105) MDS Standard MDD Lead pitch 5,7.5mm 100VDC 250VDC 400VDC 630VDC 50VDC 63VDC 100VDC 250VDC 0.5610 0.1810 0.0394.7 0.012.2 0.12.2 0.11.0 0.0470.47 0.010.15 FPA Small in size High temperature proof Halogen-free 450VDC 550VDC 0.472.2 -40 85 (110) Low Noise Needle flame test proof 450VDC 0.472.2 -4085 (110) -4085 (105) FPB Standard General use PFC circuit in power Capacitance F FPS3 FPS -40 85 (105) -40 85 (105) Large capacitance MDL Miniature and Large capacitance For high frequency and high ripple 35VDC 63VDC 4.722 1022 -40 85 (105) High voltage MDD High voltage series For AC and DC 1250VDC (500VAC) 0.00220.1 -40 85 (105) FPD4 Standard 250VDC 450VDC 630VDC 0.0110 0.013.3 0.012.2 -40 105 FPD5 Small in size 450VDC 0.472.2 -40 105 CFD-N For noise immunity test Standard 125VAC 250VAC 0.0334.7 0.012.2 -40 85 (105) C-R Unit 125VAC 250VAC 0.1F 120 0.033F 120 -40 85 0.010.1F 47, 100, 120 -40 100 High frequency circuit use Across- the- line use CR Surge absorber C-R units CRKH C-R Unit UL,VDE Safety Standard 250VAC 275VAC Compliance with RoHS requirement Our film capacitors (all products in the above list) comply with RoHS requirement. About Nitsuko product, Please contact as follows. Nitsuko Electronics Corporation http://www.nitsuko-ele.co.jp/ DevelopmentSales Department 2031-1, Ogawara, Suzaka-shi, Nagano-ken, Postcode 382-0071 TEL (+81) 26-246-6351 FAX (+81) 26-245-6239 E-Mail: ec@nitsuko-ele.co.jp Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 27 Information http://www.kamaya.co.jp SMD Product handling manual 1. Scope This product handling manual is applied to parts for the surface mounting that KAMAYA ELECTRIC CO., LTD. produce. 2. Storage Consider the following four points for keeping the environment, the storage method, and the storage period to maintain the qualities of parts below. 3.5 Examples of division of land pattern (Cross-sectional view) a. Land share with lead component. b. Mounted near Chassis. c. Side by side array. Figure-2 a) Land share with lead component. 2.2 Avoid keeping goods in high temperature and direct sunlight. Otherwise, it may cause deformation of packing materials, and adherence of parts on packing materials. 2.3 Please enforce First-In & First-Out for the use of parts in consideration of the change in the environmental condition. 2.4 Store these products in the following environment. Temperature: 5 to 35 Humidity : 25 to 75 Terms of guarantee: 2 years 3. Pattern Design To solder parts on the printed circuit board properly, it is necessary to take a careful attention in design stage. It is necessary to consider the land pattern position by mounting equipment, method of soldering (flow or reflow), and material of print circuit board. Moreover, it is necessary to consider the position of adhesive and the array of parts at the flow soldering. Refer to Page 30 for recommended land pattern of Kamaya product Solder resist Failure example Improvement example b) Mounted near chassis Chassis Chassis Solder (for Grounding) Failure example 3.2 Interval of parts should not narrow too much for the short-circuit prevention. In general, it is safer to open more than 0.5mm from the positioning accuracy of mounting. 3.3 The resistor is a generation of heat source. The pattern design that opens enough distance is necessary from other generation of heat parts. Especially, please do enough derating of the rated dissipation for a high voltage circuit after considering the temperature rises of the adjoining generation of heat parts. 3.4 When the flow soldering is executed, soldering differs depending on the direction where the printed circuit board is thrown. Figure-1 PCB flows direction Easy to become a defective soldering. Solder resist Improvement example c) Side by side array Solder resist Land Land Failure example 3.1 Strength of parts might decrease under the condition that the width or the shape of land pattern is too large, or the bend of the substrate occurs when gap of soldering position is generated or there are a lot of solder quantities. Lead of component Lead of component 2.1 Avoid storing in locations where corrosive gas is present (Sea breezes, Cl2, H2S, NH3, SO2, NO2, etc.) or in dusty and moist circumstances. Otherwise, it may result in deterioration of performance and adversely affect the soldering. Improvement example 3.6 Avoid the component placement to the following places. 1) Near cutting line of print circuit board. 2) Place where print circuit board is distorted and mechanical stress is received easily. Figure-3 Layout of resistors near the cutting line of print circuit board. Improper A B C&D Proper Board1 4. Print Circuit Board Please consider following respects. 4.1 Thermal diffusivity (thermal conductivity) Thermal diffusivity through the print circuit board is necessary for generation of heat from parts. Especially, use the print circuit board with high thermal conductivity when the calorific value is large. 4.2 Resistance to soldering heat Select a heatproof, good substrate to soldering parts. Because it often solders two or more times. Bad 28 Board2 Good Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Information http://www.kamaya.co.jp SMD PRODUCT HANDLING MANUAL 4.3 Pull peel strength of land pattern Consider that the print circuit board corresponding to the land pattern size and sticking strength with the copper foil. 4.4 Bend strength The stress in the electrodes and parts body, when the PCB bends by weight and external stress of parts, causes the joining electrode flaking off and the crack. Consider the bend ability of print circuit board. 5. Adhesive When an adhesive is applied, the spread should be set corresponding to each part so that there are no overflow into the land or no dropout of the parts. 5.1 Strength of adhesive must be strong not to fall and move parts in the mounting process. 5.2 Stiffen at the low temperature as much as possible. Do not heat parts as the cure temperature. 5.3 Keep without stringy, slumping adhesion, and dewetting that solder can not adhere to parts. 5.4 After soldering, there must be no causticity. 6. Mounting Please consider following to install parts in the printed circuit board. 1) Gap of installing position 2) Product floating from land pattern 3) Mechanical stress to overcoat of parts. 6.1 Do not touch with bare-handed in the electrode and wash it well with an organic solvent when the foreign body such as oils and fats adheres. 6.2 Mounting trouble of static electricity may occur when you touch or rub the part, packaging materials and the cover tape of the taping especially. When you deal with parts on the worktable, please execute the static electricity prevention measures (like the electrification prevention mat). 7. Soldering 7.1 The lead free is recommended in the solder paste. Select appropriate solder paste after executing the evaluations of soldering and strength of bond, etc. 7.2 Select flux without the causticity. 7.3 The conditions of temperature and time should be well considered in the soldering process so that any warp or twist in the printed circuit board may not grow.Moreover, the electrode might flake off when the substrate is bent after it solders or the high impact is given parts or around it. 7.4 In VPS Reflow, preheat well so that the difference of temperature may not big too much between parts and inside of furnace. A big difference of temperature cause drop out of parts. 7.5 Do not rub the electrodes of resistor with soldering iron. The electrode may flake off when the iron is pressed on the electrode. Do not raise the temperature of the soldering iron more than necessary when the side electrode of parts is formed with the Ag resin. Figure-4 Flaking off 7.6 The overcoat and the main body may be chipped off when you hold the parts strongly with tweezers. Do not use parts detached from the print circuit board once again. 7.7 Please refer to page 31 for our recommended soldering conditions. 8. Cleaning The remaining of the flux on print circuit board with part mounted may cause a bad effect on humidity resistance and corrosion resistance. Please use a rosin flux with low chlorine-containing, or alcoholic and hydrocarbon solvent. 9. Other Notes 9.1 The use of the products mentioned in this catalog refers to consumer applications that are available on the open market. 9.2 There are cases which high levels of reliability distinctive from consumer applications sold on the open market are necessary for electrical components which are used in equipment that could effect human life or create huge social loss owing to defect in medical equipment, space equipment, nuclear powerrelated equipment, vehicle mounted equipment, aircraft and other equipment. When you examine the use in the abovementioned equipment or for uses not mentioned within this catalog, ensure that you consult with our sales department prior to deployment. 9.3 As the use of resistors and surface-mounted parts used in all electrical components, especially resistors used in high-voltage circuits and in circuits prescribed for safely regulations, will be greatly affected by the circuit used, the method of mounting, the material, and environmental conditions, ensure that you consult with our sales department prior to deployment when examining the viability of use in characteristic circuits, mounting methods, material and under characteristic environmental conditions, 9.4 Thoroughly verify performance and reliability when using under the following characteristic environmental conditions : (1) Use within a liquid environment (Water, oil, liquid chemical, organic solution, etc.) (2) Use in direct sunshine. Outdoors in heavy dew, in dusty environments, or where corrosive gas is present (Sea breezes, Cl2, H2S, NH3, SO2, NO2, etc.) (3) Use in environments with strong electrostatic or magnetic waves exists. (4) Use nearby flammable substances. (5) Use with the resistors coated in resin, etc. (6) Use of water or water solution for flux cleaning after unwashed soldering or soldering. (7) Use under environment of condensation 9.5 Ensure that the condition of the mounting is evaluated and verified on circuit boards when subjected to overloads in the form of pulses or surges, etc. 9.6 Take cares handling these products as they may be damaged and become defective if subject to impact, such as dropping. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 29 Information http://www.kamaya.co.jp SMD Product handling manual (RECOMMENDED LAND PATTERN) Note: This land pattern is not supported by the mounting evaluation. This is reference information only. *Application *Recommended land pattern (Reference) All KAMAYA Surface Mount Devices 1.Square chip type (No. of terminals: 2) X Size Y A B Y Flow soldering Metric Inch 0402 0603 1005 1608 2012 3216 3225 5025 6332 01005 0201 0402 0603 0805 1206 1210 2010 2512 A B X Reflow soldering Y A B X Y 0.8 0.9 1.05 1.05 1.2 1.2 0.18 0.3 0.5 1.0 1.3 2.2 2.2 3.9 5.2 0.58 0.9 1.3 2.0 2.7 3.9 3.9 5.9 7.2 0.2 0.3 0.5 0.8 1.25 1.6 2.5 2.5 3.2 0.2 0.3 0.4 0.5 0.7 0.85 0.85 1.0 1.0 Not applied 1.0 1.3 2.2 2.2 3.9 5.2 2.6 3.1 4.3 4.3 6.3 7.6 0.8 1.25 1.6 2.5 2.5 3.2 For RLP, MLP please refer to the page 8. 2.Chip network type (No. of terminal: Multiple) Land pattern 1 Land pattern 2 P A B Y Y B A Y Y P X C X X C X Land pattern 4 Land pattern 3 P Y Y A B A Y B Y P X C X X C X Flow soldering Land pattern Style RAC10 2D RAC10 1A RAC10 4D RAC16 4D RAC16 8U RAC16 8D 1 2 2 3 4 Terminals style C C C C P A B 0.65 0.5 0.8 0.64 0.5 C Reflow soldering X Y Not applied 1.0 2.6 0.35 Not applied 0.45 0.8 A B C X Y 0.5 1.3 0.34 0.33 0.4 0.5 1.0 1.0 1.0 1.3 2.0 2.0 2.0 0.15 0.35 0.32 0.2 0.35 0.45 0.32 0.3 0.4 0.5 0.5 0.5 *Others (1) Please contact Kamaya Sales Dept. for other products and further details. (2) Please carry out an enough mounting evaluation when use these patterns. 30 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Information http://www.kamaya.co.jp SMD Product handling manual (RECOMMENDED SOLDERING CONDITION) Note: This soldering condition is not supported by the mounting evaluation. This is reference information only. *Application All KAMAYA Surface Mount Devices *Recommended soldering condition (Reference) 1. Reflow soldering 1.1 Recommended condition of Sn-Pb solder. 1.2 Recommended condition of Sn solder Reflow times: 2 times Reflow times: 2 times Peak245250 230240 10s.max. 230 200 Temperature (C) Temperature (C) 200 150 Preheat 180 150 Preheat 100 100 60120s 80120s 1030s 4030s 2. Flow soldering (Recommended condition of Sn solder and Sn-Pb solder) 245250 Temperature (C) 200 150 110130 100 Preheat 60120s 35s 3. Soldering Iron (Recommended condition of Sn solder and Sn-Pb solder) (1) Temperature of soldering iron tip: 300C, Duration: 10 s max. (2) Temperature of soldering iron tip: 350C, Duration: 3 s max. *Others (1) Please contact Kamaya Sales department for further information. (2) Please carry out an enough mounting evaluation when use this profile. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 31 Information http://www.kamaya.co.jp Term Explanation * Resistors Rated Dissipation The maximum value of the electric power that can continuously be impressed to the resistor at the ambient temperature provided for within the category temperature range is indicated. The derated values of dissipation for temperatures in excess of 70 shall be indicated by the derating Curve. Please note that the chip resistor networks provide for the rated dissipation of each element and each package when you use it. Rated Voltage The maximum value of the D.C or r.m.s. voltage that can continuously be impressed to the resistor at the ambient temperature provided for within the range of the category temperature range is indicated. Rated Voltage = (Rated Dissipation) (Rated Resistance). (d.c. or a.c. r.m.s. Voltage) However, Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. Critical Resistance Value Critical resistance value is the resistance value at which the rated voltage is equal to the limiting element voltage. Below critical resistance value, please use the rated voltage as the limiting element voltage. Limiting Element Voltage The maximum value of the d.c. or r.m.s. voltage that can continuously be impressed to the resistor and the resistive element is indicated. Limiting Element Voltage that provides for the kind and each shape is different. Isolation Voltage The maximum value of the d.c. voltage that can be impressed for 1 minute the one that the electrode (terminal) was lumped together and between the insulation exterior or substrates is indicated. When the voltage that exceeds the isolation voltage is impressed for the electrode and the insulation exterior (substrate), the insulation exterior might be destroyed by generation of heat and the direct current electrolysis action by the leakage current. Voltage proof The r.m.s voltage is impressed for 1 minute the one that the electrode (terminal) was lumped together and between the insulation exterior or substrates, and the insulation exterior indicates the maximum value of the voltage that breakdown or flashover. Category Temperature Range Derating Curve The derated values of dissipation for temperatures in excess of 70 shall be indicated by the following Curve. Percentage of the rated dissipation (current)(%) The ambient temperature of the resistor that can continuously be used adding a regulated rated load (electric power) is shown. It is not a temperature of air outside of an electronic equipment, and it is necessary to compare it with the ambient temperature in the electronic equipment in which the resistor is built in. 100 Area of recommended operation 0 55 70 125 155 Ambient Temperature (C) Variation of resistance with temperature (Temperature Coefficient of Resistance: TCR) The change of resistance 1 rate of the resistor within the range of the category temperature (category temperature range) is shown. R-R0 1 Temperature Coefficient of Resistance: TCRx10-6/= x x10-6 R0 T-T0 R :Measured resistance at T R0 :Measured resistance at T T :Measured test temperature () T 0 :Measured base temperature () Especially, because the resistance temperature coefficient tends the large dependence of the measurement resistance on the measuring method, RLC/RLS/RCC/RLP&MLP needs noting. 32 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Chip Resistors Information General purpose http://www.kamaya.co.jp Term Explanation * Chip Fuses & Fusible Resistors Joule Heat It is the heat generated by the current. The fuse melts inside by joule heat, and interrupts the current. Fusible Characteristics Relation between current (I) and fusion time (t) that flows to fuse. It shows for the fusible Resistors by the relation between an impressed electric power (W) and the fusion time (W-t characteristic). Rated Voltage It shows maximum voltage value fuse can work properly. It is the maximum voltage value in which the circuit can be safely interrupted after the fuse workings. On selecting a fuse, it is necessary to confirm that the maximum rated voltage is less than rated voltage. Interrupting Rating It shows Maximum voltage(Rated voltage) and Maximum current for an interrupting circuit safely. Maximum voltage and Maximum current should be applied below interrupting rating. Working Temperature Range It is temperature range fuse can works with specified condition, Ambient temperature is to be within category temperature range. Rated Current A value of current which the fuse can be complied with, according to the test conditions. It is different from the maximum current that applied to fuses, considering a long life span, the deratings are required. Steady - State Current It is current value at time that regularly flows to circuit regularly. Deratings 1Nominal Derating It is derating value for rated current. The reduction rate is depended on the type of fuse. 2Temperature Derating It is ambient temperature derating value for rated current. The reduction rate is depended on the types of fuse and ambient temperature. In-rush Current(Rush current) Current that rapidly flows on circuit when power supply is turned on. In many cases In-rush Current is bigger than Steady-state Current. Chip fuses are confirmed to withstand In-rush Current. Internal Resistance Value An internal resistance values shown in this document include values in any materials of fuse, fuse element, outer terminations etc. Please refer to "section 10" for further information. Additionally, resistance values are different depending on Temperature and Steady-state Current. Maximum Open Circuit Voltage Maximum open circuit voltage is the value of voltage applicable to both ends of resistors, when a resister is open condition in a circuit. This voltage shall be corresponding to 1,000 times the rated dissipation or maximum open circuit which is the less severe. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 33 Information http://www.kamaya.co.jp Product Marking Color coding ** Three - color band or four - color band system Color Black Brown Red Orange Yellow Green Blue Purple Gray White Gold Silver Not colored 1st color band 2nd color band 3rd color band 4th color band 1st figure 2nd figure Multiplier Resistance tolerance 0 0 100 F(1%) 1 1 101 2 2 102 G(2%) 3 103 3 4 4 104 5 5 105 6 106 6 7 107 7 8 8 108 9 9 109 10-1 J(5%) 10-2 K(10%) M(20%) * Five - color band system Color Black Brown Red Orange Yellow Green Blue Purple Gray White Gold Silver 1st color band 2nd color band 3rd color band 4th color band 5th color band 1st figure 2nd figure 3rd figure Multiplier Resistance tolerance 0 0 100 0 1 F(1%) 1 1 101 2 G(2%) 2 2 102 3 3 103 3 4 4 104 4 5 105 D(0.5%) 5 5 6 6 106 C(0.25%) 6 7 107 7 7 B(0.1%) 8 108 8 8 9 9 109 9 10-1 10-2 *RC1/2U : Please refer to page 24. *For three-color band system the 4th color band is eliminated (Resistance tolerance is 20%). * Example 1st color band Brown 1 * Example 2nd color band 3rd color band Red Yellow 2 104 12 10,000 (ohm) 5% 120k ohm J 4th color band Gold 5% 1st color band Purple 7 2nd color band 3rd color band 4th color band Blue Gray Gold 10-1 6 8 768 0.1 (ohm) 1% 76.8 ohm F 5th color band Brown 1% *Rated resistance symbols The symbols to indicate rated resistance are depicted in 3 characters (for the E6, E12, and E24 series) or 4 characters (for the E48, E96 and E192 series) as indicated below. In the case of 3 characters, the first and second character represent the effective numeral, and the third character is the multiplier following the effective numeral. In the case of 4 characters, the first, second and third character represent the effective numeral, and the fourth character is the multiplier following the effective numeral. When a decimal point exists, the decimal point is represented by an R for all effective numerals. * 3-Digit (example) Rated resistance symbols R15 1R5 150 151 152 153 154 155 156 157 34 Resistance value 0.15 ohm 1.5 ohm 15 ohm 150 ohm 1.5k ohm 15k ohm 150k ohm 1.5M ohm 15M ohm 150M ohm * 4-Digit (example) Rated resistance symbols R154 1R54 15R4 1540 1541 1542 1543 1544 1545 1546 Resistance value 0.154 ohm 1.54 ohm 15.4 ohm 154 ohm 1.54k ohm 15.4k ohm 154k ohm 1.54M ohm 15.4M ohm 154M ohm * Resistance values of 100M ohm and greater(example) Rated resistance symbols 100M 1G00 10G0 100G Resistance value 100M ohm 1G ohm 10G ohm 100G ohm *The letters M and G are used as multipliers for 106 and 109 respectively of the resistance value expressed in ohms. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Information http://www.kamaya.co.jp Standard Resistance Values and Symbols *Code Tolerances Code H N M K J G F D C B *Temperature Characteristics Symbol Table Code E C K D A M N Tolerance on rated resistance 50% 30% 20% 10% 5% 2% 1% 0.5% 0.25% 0.1% *Significant Figure of Resistance Value E6 E12 E24 E48 E96 E192 10 10 10 100 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 178 182 187 191 196 200 205 210 100 101 102 104 105 106 107 109 110 111 113 114 115 117 118 120 121 123 124 126 127 129 130 132 133 135 137 138 140 142 143 145 147 149 150 152 154 156 158 160 162 164 165 167 169 172 174 176 178 180 182 184 187 189 191 193 196 198 200 203 205 208 210 213 105 11 12 12 110 115 121 127 13 133 140 147 15 15 15 154 16 162 169 18 18 178 187 196 20 205 E6 22 E12 22 E24 E48 E96 E192 22 215 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 215 218 221 223 226 229 232 234 237 240 243 246 249 252 255 258 261 264 267 271 274 277 280 284 287 291 294 298 301 305 309 312 316 320 324 328 332 336 340 344 348 352 357 361 365 370 374 379 383 388 392 397 402 407 412 417 422 427 432 437 442 448 453 459 226 24 237 249 261 27 27 274 287 30 301 316 33 33 33 332 348 36 39 39 Temperature coefficient of resistance 25 x10-6/C 50 x10-6/C 100 x10-6/C 200 x10-6/C 500 x10-6/C 1,000 x10-6/C 70 x10-6/C 365 383 402 43 422 442 E6 47 E12 E24 47 47 E48 E96 E192 464 464 475 487 499 511 523 536 549 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 464 470 475 481 487 493 499 505 511 517 523 530 536 542 549 556 562 569 576 583 590 597 604 612 619 626 634 642 649 657 665 673 681 690 698 706 715 723 732 741 750 759 768 777 787 796 806 816 825 835 845 856 866 876 887 898 909 920 931 942 953 965 976 988 487 51 511 536 56 56 562 590 62 619 649 68 68 68 681 715 75 750 787 82 82 825 866 91 909 953 *Please refer to each page for standard values of each parts. Numerical Symbols and Multipliers Code Multiplier T(tera) 1012 G(giga) 109 M(mega) 106 k(kilo) 103 (micron) 10-6 m(milli) 10-3 n(nano) 10-9 p(pico) 10-12 Formula of Ohm's Law Direct Current Calculating Formula Voltage(E) Power(P) EI 2 IR E2 R IR PR Current(I) P I E R P R Resistance(R) P E E I E2 P P I2 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 35 Information http://www.kamaya.co.jp Kamaya Shipping Label Kamaya products are put a shipping label on reel or other packaging. Refer to the sample of the shipping label as follows. *Example for chip resistors RMC1/16K 272F TP 1608size, Fixed Thick Film Chip Resistor, 2.7k ohm F(1%) (2) RMC1/16 K 272F TP 01 P/N XXXX (6) 2 . 7 KF52-50H 5000PCS (4) (5) L / N 071412282H 70815 KAMAYA OHM (1) (7) (3) (1)Product type(Style, Temperature coefficient of resistance, Rated resistance, Tolerance, Packaging) (2)Parts number from customer (P/N) (3)Quantity (4)Shipping Lot Number (L/N) (5)Manufacturer (6)Internal code 1 (7)Internal code 2 *There are cases in which (2) and (7) are not shown on Kamaya shipping label. *Please contact Kamaya sales department, if you need to confirm this label specification. 36 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Walsin: RGC1/16C5102DTP RGC1/16C1472FTP RGC1/16C6801DTP RGC1/16C3301FT RGC1/16C1072FTP RGC1/16C1004FTP RGC1/16SC6813DTH