LT1A-0115M - IDEC - Product.Network

Display Lights

Signalight To wers

www.idec.com

USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-7

Display Lights

56mm LT1 Series Light Towers

Display Lights with a Tower of Advantages

Key features of the LT1 series SignaLight towers include:

• Custom conﬁgurations meet your speciﬁcations — simply

•Select your ﬂash preference, lens colors, number of tiers, mounting

style, and voltage

• Choice of LED or incandescent lamps

LED lamps provide over 100,000 hours of service life and are

interchangeable with incandescent bulbs

Incandescent lamps (available up to 10 watts) are vibration-

resistant and provide a 2,000 hour service life

• Replace the bulbs independently; no need to disassemble the

entire unit

• Heat- and shock-resistant polycarbonate lenses

• Flashing models allow each lamp to be ﬂashed or steady

• Choice of metallic base or cost-saving plastic base

• Color-coded wires make assembly and wiring easy

• Mounting options include base and pole mount

Base Mount

Pole Mount

(with “L” bracket)

File No. E70646

Signalight To wers

Display Lights

C-8

www.idec.com

USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC

Display Lights

Specifications

LT1A: Incandescent, Non-Flashing

LT1D: Incandescent, Flashing/Non-Flashing

LT1H: LED, Non-Flashing

LT1K: LED, Flashing/Non-Flashing

Nominal Voltage

12V AC/DC ±10% 24V AC/DC ±10% 120V AC ±10% 240V AC ±10%

Internal Fuse Rating

3.15A 3.15A 1A 1A

Lamp

Rating

LED

12V AC/DC 24V AC/DC 120V AC N/A

Incandescent

12V, 5W 30V, 10W 120V, 7W 240V, 10W

Current

Required

per Lamp

LED

N/A

Incandescent

0.4A ±10% 0.3A ±10% 0.06A ±10% 0.05A ±10%

External Contact Capacity

5A 5A 2A 1A

In-Rush

Current

per Lamp

LED

Not applicable

Incandescent

Below 4.0A Below 3.0A Below 0.6A Below 0.5A

Lamp

Style

LED

BA15D lamp base

Incandescent

T20 glass bulb, BA15D lamp base

Lamp

Life-Span

LED

100,000 hours (minimum)

Incandescent

2,000 hours (average)

Lens Colors

Red, Yellow, Green, Blue, White

Lens Diameter 2.20" (56mm)

Maximum Tiers 5

Degree of Protection IP20 (for indoor use only), NEMA1

Flash Rate LED: 45/minute ±10% (LT1K only)

Incandescent: 80/minute ±10% (LT1D only)

Insulation Resistance More than 3MΩ by a DC 500V megger

Voltage Resistance 1,500V AC for 1 minute

Operating Range –30 to +40°C (LT1A), –10 to +40°C (LT1D), 15 to 90% relative humidity

Vibration Resistance 2.2G maximum

Mounting

Base mount (three stud)

Pole mount (horizontal or vertical surface)

NPT mount (via adaptor) to 1/2" or 3/4" NPT conduit

Install in an upright position

Optional Pole Height 10.75" (273mm)

Approvals

Wire Size Non-ﬂashing (steady): 20 AWG

Flashing: 18 AWG and 20 AWG

LT1 Speciﬁcations

Red Green Yellow White Blue

12VDC 54mA 78mA 54mA 54mA 78mA

24VDC 54mA 39mA 54mA 54mA 39mA

120VAC 30mA 30mA 30mA 30mA 30mA

File No. E70646

Display Lights Signalight To wers

www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-9

Display Lights

Part Number Guide

Part Numbers: Assembled Parts

Examples: Assembled Parts

Box No. Description Code

➀Light source

and function

Non-ﬂashing (steady),

incandescent lamp A

Flashing/non-ﬂashing, incan-

descent lamp D

Non-ﬂashing (steady),

LED lamp H

Flashing/non-ﬂashing,

LED lamp K

➁Number of tiers Maximum of 5 tiers 1 – 5

➂Voltage

12V AC/DC 1

24V AC/DC 2

120V AC 5

240V AC (incandescent only) 8

➃Mounting style and

base designation

Beige frame cover 1

Metallic frame cover 2

Beige frame cover, pole incl. 3

Metallic frame cover, pole incl. 4

➄ – ➈Color code

Red R

Yellow Y

Green G

Blue S

White W

Part No. Description

LT1A-354-RRR Non-ﬂashing incandescent, 3 tiers, 120V AC, pole-mount,

metallic base, all Red lenses

LT1D-182-S Flashing/non-ﬂashing incandescent, 1 tier, 240V AC, base-

mount, metallic base, Blue lens

LT1D-221-RS Flashing/non-ﬂashing incandescent, 2 tier, 24V AC/DC,

base-mount, plastic base, Red and Blue lenses

LT1H-412-RGYW Non-ﬂashing LED, 4 tier, 12V AC/DC, base-mount, metallic

base, Red, Green, Yellow, and White lenses

LT1K-554-GSRGR Flashing/non-ﬂashing LED, 5 tier, 120V AC, pole-mount,

metallic base, Green, Blue, Red, Green, and Red lenses

LT1 Part Numbers (assembled)

LT1 A 3 5 3 R Y G

–– To determine the appropriate

SignaLight part number, use these

numbered boxes in conjunction

with the codes in the Part Numbers:

Assembled Parts table below.

➀➁➂➃ ➄➅➆ ➈➇

Light source

and function Number

of tiers Voltage Mounting

style and

base des-

ignation

Color code

➃

Specify lens color code from the lowest to the highest tier.

Signalight To wers Display Lights

C-10 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC

Display Lights

Part Numbers: Sub-Assemblies

Bill of Materials Quantities

Description Part No. Notes Examples

Frame

LT1①-01②➂*

① =Type

A = Incandescent, non-ﬂashing

D = Incandescent, ﬂashing/non-ﬂashing

H = LED, non-ﬂashing

K = LED, ﬂashing/non-ﬂashing

② = Number of tiers (1–5)

➂ = Lamp voltage

1 = 12V AC/DC

2 = 24V AC/DC

5 = 120V AC

8 = 240V AC

* = Frame cover (M = metallic, P = beige)

LT1A-0142M = Steady light, four

tiers, 24V AC/DC, metallic base

LT1D-0125P = Flashing light, two

tiers, 120V AC, plastic base

Lens

LT1X-08* * = Color:

R = Red, Y = Yellow, G = Green, S = Blue, W = White LT1X-08G = Green lens

LED Lamps 12V AC/DC LTXD-1*

* = Color:

R = Red, Y = Yellow, G = Green, S = Blue, W = White

LTXD-1R = Red LED, 12V AC/DC

24V AC/DC LTXD-2* LTXD-2S = Blue LED, 24V AC/DC

120V AC LTXD-120* LTXD-120Y = Yellow LED, 120VAC

Incandescent

Lamps

12V AC/DC B5-2

30V AC/DC B5-31

120V AC B5-1

240V AC B5-4

Top cap

LT1X-06

Mounting pole (optional)

LT1Z-10

Description Quantity

Body frame Required: 1 per unit

Lens(es) Variable: from 1 – 5

Top cap Required: 1 per unit

Lamps Variable: from 1 – 5

Mounting pole Optional: 1 per unit

LT1 Part Numbers (sub-assembled)

Frame

Lenses Lamps Top Cap

Complete

Part

Display Lights Signalight To wers

www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-11

Display Lights

Part Numbers: Accessories/Replacement Parts

Description Part No. Remarks

LED Lamp LTXD-1②12V AC/DC

See chart for available colors

LTXD-2②24V AC/DC

See chart for available colors

LTXD-120②120V AC

See chart for available colors

Incandescent Lamp B5-2 12V AC/DC, 5W

B5-31 30V, 10W (for use with 24V AC/DC)

B5-1 120V AC, 7W

B5-4 240V AC, 10W

Lens

LT1X-08②See chart for available colors

Top Cap

LT1X-06 Clear polycarbonate

Mounting Pole

LT1Z-10 Chrome-plated steel supplied with “L”

bracket and two M22 x 1.5 hexagonal nuts

Pole Mounting Fixture

LT1Z-11

Aluminum ﬁxture for mounting pole-

mounted units to horizontal surface; not

included with assembled SignaLight units

NPT Pole Adaptors

LT1Z-NPT50 1/2" NPT pole adaptor; not included with

assembled SignaLight units

LT1Z-NPT75 3/4" NPT pole adaptor; not included with

assembled SignaLight units

LT1 Accessories

In place of ② specify lens/LED color code from chart at right.

➁Lens/LED Color Code

Color Code

Amber A

Green G

Red R

Blue S

White W

Yellow Y

Signalight To wers Display Lights

C-12 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC

Display Lights

LT1 Wiring

Common Cable = (White)

External Contact Connections

AC/DC

LT1A/LT1H: Non-Flash Series LT1D/LT1K: Flash/Non-Flash Series

Wiring is color-coded

to match the number

of tiers.

1 tier = R

2 tier = RY

3 tier = RYB

4 tier = RYBS

5 tier = RYBSW

Color Codes:

R = Red

Y = Yellow

B = Brown

S = Blue

W = White

SignaLight Dimensions

1.57"

(ø40mm)

Cord Hole

0.39" (ø10mm)

0.12" - 0.197" (3 - ø5mm)

120°

Assembled Base Mount Assembled Pole Mount

Mounting Hole Layout:

Base Mounting Style

0.394

(10mm)

2.20"

(ø56mm)

2.75"

(70mm)

0.787"

(20mm)

Number of

Tiers L1

1 6.7" (170mm)

2 9.4" (1240mm)

3 12.2" (310mm)

4 15.0" (380mm)

5 17.7" (450mm)

Number of

Tiers L1

1 6.7" (170mm)

2 9.4" (1240mm)

3 12.2" (310mm)

4 15.0" (380mm)

5 17.7" (450mm)

0.875”

1.7”

(44mm)

3.2”

(81mm)

Display Lights Signalight To wers

www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC C-13

Display Lights

Adapter

LT1 Dimensions con’t

M22 x 1.5 threads

1/2" NPT threads

1.47" (37mm)

1.00" (25mm)

M22 x 1.5 threads

1.63" (41mm)

3/4" NPT threads

1.17" (30mm)

NPT50 NPT50

LT1Z-NPT50 LT1Z-NPT75

3.9" (100mm)

2.4" (60mm)

2–ø0.2" (5mm)

ø2.9" (73mm)

ø0.9" (22mm)

2–0.2" x 0.3"

(4.5 x 8mm)

2–ø11mm

1.2"

(30mm) 1.4"

(35mm)

1.3" (32mm)

ø1.6" (47mm)

0.8"

(20mm)

0.875"

(22mm)

2.4"

(60mm)

10.8" (274mm)

3.2" (81mm)

Pole Length 11.8" (300mm)

0.5" (13mm)

1.7" (44mm)

Optional Pole Mounting Base: Side View (LT1Z-11)

Optional Pole Mounting Base: Bottom View Mounting Bracket

(provided with mounting pole)

Mounting Pole (LT1Z-10)

2–M0.2" x 0.4"

(M4 x 10mm)