SNAP-IDC5-SW-NC - OPTO 22 - Product.Network

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

PAGE

1

DATA SHEET

Form 0773-150211

SNAP Digital Input Modules

Features

Four channels per module

4,000-volt transient isolation

Convenient pluggable wiring terminals

Channel-specific LEDs

UL and CE approved

Accepts 22 to 14 AWG wire

Factory Mutual approved (part numbers ending in FM)

Description

Opto 22 SNAP I/O digital input modules are

part of the SNAP PAC System. Optical

isolation on these modules provides 4,000

volts of transient (4000 V for 1 ms)

protection for sensitive control electronics

from industrial field signals. Digital input

modules can sense either AC or DC signals.

All SNAP digital modules have removable

top-mounted connectors to provide easy

access for field wiring, and all operate on 5

VDC control logic. Each digital module

features integral channel-specific LEDs for

convenient troubleshooting and

maintenance. Each module is factory

tested twice and is UL and CE approved. In

addition, part numbers ending in FM are

Factory Mutual approved.

SNAP input modules are used to sense the

on or off status for AC or DC voltages from

such sources as proximity switches, push

buttons, or auxiliary contacts. The SNAP-

IDC5G is ideal for detecting 48 VDC in

telecom applications. The SNAP-IDC5-HT

is designed for sensors that have a high

leakage current.

The SNAP-IDC5-SW and SNAP-IDC5-SW-

NC modules supply power to an external

dry contact switch and sense switch

closure (SNAP-IDC5-SW) or opening

(SNAP-IDC5-SW-NC).

SNAP-IAC5MA and SNAP-IDC5MA feature

manual-on/manual-off/automatic

switches, ideal for testing control

applications. The switches override input

from field devices, so you can determine whether a problem

lies in the application or in the device.

SNAP racks use a retention rail locking system that holds

modules securely to the rack. Normally, a hold-down screw is

not required. However, for applications that require additional

module security, each module has provisions for two 4-40 by

½-inch standard machine screws to hold the module in

position on the SNAP rack.

Part Numbers

Part Description

SNAP-IAC5 SNAP 4-channel 90–140 VAC input, 5 VDC logic

SNAP-IAC5A SNAP 4-channel 180–280 VAC input, 5 VDC logic

SNAP-IAC5MA SNAP 4-channel isolated 90–140 VAC/VDC input, 5 VDC

logic, with manual/auto switches

SNAP-IAC5FM SNAP 4-channel 90–140 VAC/VDC input, 5 VDC logic, Fac-

tory Mutual approved

SNAP-IAC5AFM SNAP 4-channel 180–280 VAC input, 5 VDC logic, Factory

Mutual approved

SNAP-IDC5 SNAP 4-channel 10–32 VDC input, 5 VDC logic

SNAP-IDC5D SNAP 4-channel 2.5–28 VDC input, 5 VDC logic

SNAP-IDC5FAST SNAP 4-channel high-speed 2.5–16 VDC input, 5 VDC logic

SNAP-IDC5-FAST-A SNAP 4-channel high-speed 18–32 VDC input, 5 VDC logic

SNAP-IDC5G SNAP 4-channel 35–75 VAC/DC input, 5 VDC logic

SNAP-IDC5AF SNAP 4-channel high-speed 75–140 VDC input, 5 VDC logic

SNAP-IDC5GF SNAP 4-channel high-speed 35–75 VDC input, 5 VDC logic

SNAP-IDC5-HT SNAP 4-channel 15–32 VDC leakage-tolerant input, 5 VDC

logic

SNAP-IDC5MA SNAP 4-channel isolated high-speed 10–32 VAC/VDC input,

5 VDC logic, with manual/auto switches

SNAP-IDC5-SW SNAP 4-channel switch status input, normally open

SNAP-IDC5-SW-NC SNAP 4-channel switch status input, normally closed

SNAP-IDC5FM SNAP 4-channel 10–32 VDC input, 5 VDC logic, Factory

Mutual approved

SNAP-IDC5DFM SNAP 4-channel 2.5–28 VDC input, 5 VDC logic

SNAP-RETN4 SNAP 4-module retention rail (OEM)

SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM)

SNAP-RETN6 SNAP 6-module retention rail (OEM)

SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM)

SNAP-FUSE4AB SNAP 4-amp fuse, 25-pac

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules

PAGE

2

DATA SHEET

Form 0773-150211

SNAP digital input modules are compatible with all SNAP PAC

brains and rack-mounted controllers, including

Wired+Wireless™.

Notes for legacy hardware: These modules can also be used

with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains,

and with other SNAP brains such as the serial B3000 and the

B3000HA. They also mount on B-series, M-series, and D-series

racks.

Wiring Options

For easier, faster wiring of field devices to input modules, see

the SNAP TEX Cables and Breakout Boards Data Sheet, form

#1756. Each SNAP TEX cable snaps into the top of the module

and terminates at the breakout board with 18-gauge, color-

coded flying leads, already stripped and ready for wiring.

Breakout boards offer optional fusing, fuse-blown indicators,

and bussed power to loads.

Specifications: AC Input Modules

SNAP-IAC5 SNAP-IAC5A SNAP-IAC5MA

Key Feature -- -- Diagnostic switches

Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Nominal Input Voltage 120 VAC/VDC 240 VAC/VDC 120 VAC/VDC

Channel-to-channel isolation 300 VAC

(1,500 V transient) 300 VAC

(1,500 V transient)

Input Voltage Range 90–140 VAC/VDC 180–280 VAC/VDC 90–140 VAC/VDC

Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 90 VAC/VDC

Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 35 VAC/VDC

Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 169 K ohms (nominal)

Logic Side Ratings

Logic Output Voltage

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 400 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 400 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 400 mA sourcing

Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum

Negative True Logic

Output Drive TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL

Module Ratings

Number of Channels Per Mod-

ule 444

Turn-on Time 30 msec 30 msec 30 msec

Turn-off Time 30 msec 30 msec 30 msec

Optical Isolation, Field to Logic 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 °C to 70 °C, operating

-40 °C to 85 °C, storage -20 °C to 70 °C, operating

-40 °C to 85 °C, storage

Agency Approvals UL, CE, CSA, RoHS,

DFARS UL, CE, CSA, RoHS,

DFARS UL, CE, RoHS, DFARS

Warranty Lifetime Lifetime 30 months

* When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules DATA SHEET

Form 0773-150211

PAGE

3

Specifications: DC Input Modules

See page 7 for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.

SNAP-IDC5 SNAP-IDC5D SNAP-IDC5G SNAP-IDC5-HT

Key Feature -- -- -- Leakage-tolerant

Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG

Torque, hold-down

screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Nominal Input Voltage 24 VAC/VDC 5 VDC 48 VAC/VDC 24 VAC/VDC

Channel-to-channel isola-

tion 300 VAC

(1,500 V transient) 300 VAC

(1,500 V transient)

Input Voltage Range 10–32 VAC/VDC 2.5–28 VDC 35–75 VAC/VDC 15–32 VAC/VDC

Turn-on Voltage 10 VAC/VDC 2.5 VDC 35 VAC/VDC 15 VAC/VDC

Turn-off Voltage 3 VAC/VDC 1 VDC 7 VAC/VDC 8 VAC/VDC

Input Resistance 15 K ohms (nominal) 3 K ohms (nominal) 64 K ohms (nominal) 3 K ohms (nominal)

Logic Side Ratings

Logic Output Voltage

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

Logic Supply Voltage*** 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum

Negative True Logic Out-

put Drive TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL

Module Ratings

Number of Channels Per

Module 4444

Tur n-on Time 5 msec 1 msec 5 msec 20 msec

Turn-off Time 15 msec 1 msec 15 msec 25 msec

Optical Isolation

(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 to 70 °C, operating

-40 to 85 °C, storage -20 to 70 °C, operating

-40 to 85 °C, storage

Agency Approvals UL, CE, CSA, RoHS,

DFARS UL, CE, CSA, RoHS,

DFARS UL, CE, RoHS, DFARS CE, RoHS, DFARS

Warranty Lifetime Lifetime Lifetime Lifetime

* At 20kHz, 5Vp-p square wave input, 50% duty cycle.

** At 20kHz, 28Vp-p square wave input, 50% duty cycle.

*** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules

PAGE

4

DATA SHEET

Form 0773-150211

Specifications: DC Input Modules (continued)

See page 7 for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.

SNAP-IDC5GF SNAP-IDC5AF

Key Feature -- --

Wire size 22 to 14 AWG 22 to 14 AWG

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Nominal Input Voltage 48 VDC 120 VDC

Channel-to-channel

isolation 300 VAC (1,500 V transient) 300 VAC (1,500 V transient)

Input Voltage Range 35–75 VDC 75–140 VDC

Turn-on Voltage 35 VDC 75 VDC

Turn-off Voltage 20 VDC 35 VDC

Input Resistance 54 K ohms (nominal) 169 K ohms (nominal)

Logic Side Ratings

Logic Output Voltage <0.5 V max. (on) @ 2 mA sinking

2.7 V min. (off) @ 0.4 mA sourcing <0.5 V max. (on) @ 2 mA sinking

2.7 V min. (off) @ 400 mA sourcing

Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum

Negative True Logic

Output Drive TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL

Module Ratings

Number of Channels Per

Module 44

Turn-on Time 1 msec 1 msec

Turn-off Time 1 msec 1 msec

Optical Isolation

(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 °C to 70 °C, operating

-40 °C to 85 °C, storage -20 °C to 70 °C, operating

-40 °C to 85 °C, storage

* When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules DATA SHEET

Form 0773-150211

PAGE

5

Specifications: DC Input Modules (continued)

See

page 7

for SNAP-IDC5-SW and SNAP-IDC5-SW-NC specifications and wiring.)

SNAP-IDC5FAST* SNAP-IDC5-FAST-A** SNAP-IDC5MA

Key Feature High-speed High-speed Diagnostic switches

Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG

Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Nominal Input Voltage 5 VDC 28 VDC 24 VAC/VDC

Channel-to-channel isola-

tion 300 VAC

(1,500 V transient) 300 VAC

(1,500 V transient)

Input Voltage Range 2.5–16 VDC 18–32 VDC 10–32 VAC/VDC

Turn-on Voltage 2.5 VDC 18 VDC 10 VAC/VDC

Turn-off Voltage 1 VDC 5 VDC 3 VAC/VDC

Input Resistance 440 ohms (nominal) 8 K ohms (nominal) 15 K ohms (nominal)

Logic Side Ratings

Logic Output Voltage

<0.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

<0.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

<0.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 400 mA sourcing

Logic Supply Voltage*** 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum

Negative True Logic

Output Drive TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL TTL 74 Series = 1 UL

TTL 74LS Series = 5 UL

Module Ratings

Number of Channels Per

Module 444

Turn-on Time 0.025 msec* 0.025 msec** 5 msec

Turn-off Time 0.025 msec* 0.025 msec** 15 msec

Optical Isolation

(Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 °C to 70 °C, operating

-40 °C to 85 °C, storage -20 °C to 70 °C, operating

-40 °C to 85 °C, storage

Agency Approvals UL, CE, FM, CSA, RoHS,

DFARS UL, CE, CSA, RoHS,

DFARS CE, RoHS, DFARS

Warranty Lifetime Lifetime 30 months

* At 20kHz, 5Vp-p square wave input, 50% duty cycle.

** At 20kHz, 28Vp-p square wave input, 50% duty cycle.

*** When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules

PAGE

6

DATA SHEET

Form 0773-150211

Specifications: AC and DC Input Modules (FM models)

SNAP-IAC5FM SNAP-IAC5AFM SNAP-IDC5FM SNAP-IDC5DFM

Key Feature Factory Mutual

approved Factory Mutual

approved

Wire size 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG 22 to 14 AWG

Torque, hold-down

screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m)

Torque, connector

screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m)

Field Side Ratings (each channel)

Nominal Input Voltage 120 VAC/VDC 240 VAC/ VDC 24 VAC/VDC 5 VDC

Channel-to-channel

isolation 300 VAC

(1,500 V transient) 300 VAC

(1,500 V transient)

Input Voltage Range 90–140 VAC/VDC 180–280 VAC/VDC 10–32 VAC/VDC 2.5–28 VDC

Turn-on Voltage 90 VAC/VDC 180 VAC/VDC 10 VAC/VDC 2.5 VDC

Turn-off Voltage 35 VAC/VDC 35 VAC/VDC 3 VAC/VDC 1 VDC

Input Resistance 169 K ohms (nominal) 305 K ohms (nominal) 15 K ohms (nominal) 3 K ohms (nominal)

Logic Side Ratings

Logic Output Voltage

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 400 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 400 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

<.5 V max. (on)

@ 2 mA sinking

2.7 V min. (off)

@ 0.4 mA sourcing

Logic Supply Voltage* 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC

Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum

Negative True Logic

Output Drive TTL 74 Series=1 UL

TTL 74LS Series=5 UL TTL 74 Series=1 UL

TTL 74LS Series=5 UL

Module Ratings

Number of Channels

Per Module 4444

Turn-on Time 30 msec 30 msec 5 msec 1 msec

Turn-off Time 30 msec 30 msec 15 msec 1 msec

Optical Isolation

(Field Side to

Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient)

Temperature -20 to 70 °C, operating

-40 to 85 °C, storage -20 to 70 °C, operating

-40 to 85 °C, storage

Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS

Warranty Lifetime Lifetime Lifetime Lifetime

*When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules DATA SHEET

Form 0773-150211

PAGE

7

SNAP-IDC5-SW and SNAP-IDC5-SW-NC Modules

Description

The SNAP-IDC5-SW and SNAP-IDC5-SW-NC modules provide

four channels of contact status input. Each module supplies 15

volts of power to an external dry contact switch. The SNAP-

IDC5-SW senses switch closure; the SNAP-IDC5-SW-NC senses

switch opening. Each user-supplied switch is connected with

two wires. Because these modules include power for the

switch, they are particularly cost-effective when labor costs for

wiring external power are high.

Typical switches for use with these modules are switched

status sensors (level sensors, pressure indicators, etc.),

magnetic reed switches (used on doors or windows for

burglar alarms), snap-action micro switches, the auxilliary

switches on motor starters, and most relay contacts.

CAUTION: The SNAP-IDC5-SW and SNAP-IDC5-SW-NC inputs

are not intended to be used with contacts that are connected

to any external user-supplied voltage or currents.

SNAP-IDC5-SW and SNAP-IDC5-SW-NC

Wiring Diagram

Specifications

Field Side Ratings (each channel)

Open Circuit Voltage

(Switch Open) 15 VDC typical

Short Circuit Current

(Switch Closed) 7 milliamps nominal

Minimum Off Resistance >20 K ohms

Maximum Allowable On

Resistance (Wire + Con-

tact Resistance) 500 ohms

Logic Side Ratings

Logic Output Voltage for

SNAP-IDC5-SW

(normally open)

<0.5 V max. (switch closed; LED on)

@ 2 mA sinking

2.7 V min. (switch open; LED off)

@ 0.4 mA sourcing

Logic Output Voltage for

SNAP-IDC5-SW-NC

(normally closed)

<0.5 V max.(switch closed; LED off)

@ 2 mA sinking

2.7 V min. (switch open; LED on)

@ 0.4 mA sourcing

Maximum Operating

Common Mode Voltage

(Field Term to Logic Con-

nector)

250 V

Power Requirements 5 VDC (±0.25) @ 200 mA

Module Ratings

Number of Channels Per

Module 4

Turn-on Time 5 msec

Turn-off Time 25 msec

Channel-to-channel Isola-

tion None

Input-to-output Isolation 1500 V AC/DC

Wire size 22 to 14 AWG

Torque, hold-down screws 4 in-lb (0.45 N-m)

Torque, connector screws 5.26 in-lb (0.6 N-m)

Temperature -20 °C to 70 °C, operating

-40 °C to 85 °C, storage

Agency Approvals UL, CE, RoHS, DFARS

FM (SNAP-IDC5SW only)

Warranty Lifetime

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules

PAGE

8

DATA SHEET

Form 0773-150211

Schematics

Most AC and DC Input Modules

See previous page for SNAP-IDC5-SW and SNAP-IDC5-SW-NC wiring diagram.

MA Modules with Manual/Auto Switches (Top View)

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules DATA SHEET

Form 0773-150211

PAGE

9

Dimensional Drawing

All Modules Except MA

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules

PAGE

10

DATA SHEET

Form 0773-150211

Dimensional Drawing

All MA Modules

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules DATA SHEET

Form 0773-150211

PAGE

11

Dimensional Drawing

All Models

IMPORTANT: The mounting rack connector has 24

pins; the module connector has 20 pins. The extra

pins on the mounting rack connector prevent

misalignment of the module during installation.

SNAP Digital Input Modules

Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2001–2015 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

SNAP Digital Input Modules

PAGE

12

DATA SHEET

Form 0773-150211

Dimensional Drawing

All Models

SNAP Digital Modu le Mounted on SN AP Rack

More About Opto 22

www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-131203

SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com

© 2014 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.

Products

Opto 22 develops and manufactures reliable, flexible, easy-to-use

hardware and software products for industrial automation,

energy management, remote monitoring, and data acquisition

applications.

groov

puts your system on your mobile device. With zero

programming, you can build mobile operator interfaces to

monitor and control systems from Allen-Bradley, Siemens,

Schneider Electric, Modicon, and many more. Web-based

groov

puts mobile-ready gadgets at your fingertips. Tag them from your

existing tag database, and they automatically scale for use on any

device with a modern web browser. See

groov.com

for more

information and your free trial.

SNAP PAC System

Designed to simplify the typically complex

process of selecting and applying an

automation system, the SNAP PAC

System consists of four integrated

components:

•SNAP PAC controllers

•PAC Project™ Software Suite

•SNAP PAC brains

•SNAP I/O™

SNAP PAC Controllers

Programmable automation controllers

(PACs) are multifunctional, modular controllers based on open

standards.

Opto 22 has been manufacturing PACs for over two decades. The

standalone SNAP PAC S-series, the rack-mounted SNAP PAC R-

series, and the software-based SoftPAC™ all handle a wide range

of digital, analog, and serial functions for data collection, remote

monitoring, process control, and discrete and hybrid

manufacturing.

SNAP PACs are based on open Ethernet and Internet Protocol (IP)

standards, so you can build or extend a system easily, without the

expense and limitations of proprietary networks and protocols.

Wired+Wireless™ models are also available.

PAC Project Software Suite

Opto 22’s PAC Project Software Suite provides full-featured, cost-

effective control programming, HMI (human machine interface)

development and runtime, OPC server, and database connectivity

software for your SNAP PAC System.

Control programming includes both easy-to-learn flowcharts and

optional scripting. Commands are in plain English; variables and I/

O point names are fully descriptive.

PAC Project Basic offers control and HMI tools and is free for

download on our website,

www.opto22.com

. PAC Project

Professional, available for separate purchase, adds one SoftPAC,

OptoOPCServer, OptoDataLink, options for controller redundancy

or segmented networking, and support for legacy Opto 22 serial

mistic™

I/O units.

SNAP PAC Brains

While SNAP PAC controllers provide central control and data

distribution, SNAP PAC brains provide distributed intelligence for

I/O processing and communications. Brains offer analog, digital,

and serial functions, including thermocouple linearization; PID

loop control; and optional high-speed digital counting (up to 20

kHz), quadrature counting, TPO, and pulse generation and

measurement.

SNAP I/O

I/O provides the local connection to sensors and equipment.

Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module,

depending on the type of module and your

needs. Analog, digital, and serial modules are

all mixed on the same mounting rack and

controlled by the same processor (SNAP PAC

brain or rack-mounted controller).

Quality

Founded in 1974, Opto 22 has established a

worldwide reputation for high-quality products.

All are made in the U.S.A. at our manufacturing

facility in Temecula, California. Because we

test each product twice before it leaves our

factory, rather than only testing a sample

of each batch, we can guarantee most

solid-state relays and optically isolated I/O

modules for life.

Free Product Support

Opto 22’s California-based Product Support Group offers free,

comprehensive technical support for Opto 22 products. Our staff

of support engineers represents decades of training and

experience. Support is available in English and Spanish by phone

or email, Monday–Friday, 7 a.m. to 5 p.m. PST.

Additional support is always available on our website: how-to

videos, OptoKnowledgeBase, self-training guide, troubleshooting

and user’s guides, and OptoForums.

In addition, hands-on training is available for free at our Temecula,

California headquarters, and you can

register online

.

Purchasing Opto 22 Products

Opto 22 products are sold directly and through a worldwide

network of distributors, partners, and system integrators. For

more information, contact Opto 22 headquarters at 800-321-

6786 or 951-695-3000, or visit our website at

www.opto22.com

.

www.opto22.com