FC5A Micro Programmable Logic Controller New 12V DC Power Type CPU Module for CPU can be powered by 12V DC battery. **Program Capacity 13.8 KB (10 points) 27 KB (16 points) 54 KB (24 points) **Maximum I/O 10/16/24 points **Instruction execution time Basic instruction LOD 0.7 s Advanced instruction MOV 33 s **Enhanced communication functions: 10 I/O type available with second port **High-speed counter maximum counting frequency 50 kHz, single/two-phase selectable: 1 point 5 kHz, single-phase: 3 points **Floating point math calculations **Double-word (32-bit) instruction calculations **User communication functions Application Examples Customize according to your requirements **Powered by Battery Solar Panel RS232C Communication Adapter (FC4A-PC1) (mini-DIN type) WARNING Frozen Surface 12V RS485 Communication Adapter (FC4A-PC2) (mini-DIN type) RS485 Communication Adapter (FC4A-PC3) (terminal block type) Display FC5A (12V DC type) is installed inside the control box. Memory Cartridge (FC4A-PM32) HMI Module (FC4A-PH1) Clock Cartridge (FC4A-PT1) Not expandable with expansion modules. * Other applications Control battery-driven traffic signals, warning lights, ATM surveillance systems, access alarms at construction sites, etc. FC5A 12V DC Power Type CPU Module Specifications (CPU Modules) **Function Specifications **General Specifications Allowable Voltage Range Maximum Power Consumption Allowable Momentary Power Interruption Dielectric Strength Insulation Resistance Noise Resistance Inrush Current FC5A-C16R2D FC5A-C24R2D Instruction Words 10.2 to 18.0V DC 28W 3.4W 4.2W 10 ms (at rated power voltage) Between power and terminals: 1,500V AC, 1 minute Between I/O and terminals: 1,500V AC, 1 minute Between power and terminals: 10 M minimum (500V DC megger) Between I/O and terminals: 10 M minimum (500V DC megger) DC power terminals: 1.0 kV, 50 ns to 1 s I/O terminals (coupling clamp): 1.5 kV, 50 ns to 1 s 20A maximum UL1015 AWG22, UL1007 AWG18 Operating Temperature 0 to +55C Storage Temperature -25 to +70C (no freezing) Relative Humidity 10 to 95% (no condensation) Altitude Operation: 0 to 2,000m, Transport: 0 to 3,000m Pollution Degree 2 (IEC60664-1) Corrosion Immunity Free from corrosive gases Grounding Wire UL1007 AWG16 Vibration Resistance Shock Resistance 147 m/s2 (15G), 11 ms duration, 3 shocks per axis on three mutually perpendicular axes (IEC61131-2) Weight 240g 310g **Communication Port (RS232C, port 1) Standards EIA RS232C Maximum Baud Rate Maintenance Communication User Communication Data Link Communication 57600 bps (maintenance communication) Isolation between Internal Circuit and Communication Port Possible Possible Impossible FC2A-KC4C, FC2A-KP1C, FC4A-KP1C, FC4AKC2C Not isolated 103 advanced Charging Time Battery Life Self-diagnostic Function Input Filter Catch Input/ Interrupt Input Maximum Counting Frequency and High-speed Counter Points Counting Range Operation Mode Quantity Analog Potentiometer Data Range Port 1 Port 2 Communication Adapter (option) *4 115 advanced 0.64 ms 6 9 14 4 7 10 128 points Battery 130 advanced 1.16 ms (1,000 steps) Shift Register Backup Duration FC5A-C24R2D 13.8 KB 27 KB 54 KB (2,300 steps) (4,500 steps) (9,000 steps) EEPROM (10,000 times rewritable) 2,048 points Timer Counter Data Register FC5A-C16R2D 42 basic Internal Relay Replaceability When mounted on a DIN rail or panel surface: 5 to 9 Hz amplitude 3.5 mm, 9 to 150 Hz acceleration 9.8 m/s2 (1G), 2 hours per axis on each of three mutually perpendicular axes (IEC61131-2) Cable User Program Storage Basic Processing Instruction Time END Processing *2 Input Max. I/O Points *3 Output Backup Data Power Supply Wire 260g Program Capacity *1 RAM Backup FC5A-C10R2D 12V DC FC5A-C10R2D Stored program system High-speed Counter Type No. Rated Power Voltage Type No. Control System 256 points (1-sec, 100-ms, 10-ms, 1-ms) 256 points (adding, reversible) 2,000 points Internal relay, shift register, counter, data register Approx. 30 days (typical) at 25C after backup battery fully charged Lithium secondary battery Approx. 15 hours for charging from 0% to 90% of full charge 5 years in cycles of 9-hour charging and 15-hour discharging Not possible to replace battery Keep data check, user program EPPROM sum check, user program RAM sum check, timer/counter preset value sum check, user program syntax, WDT check, user program writing, power failure, watchdog timer, data link connection Without filter, 3 to 15 ms (selectable in increments of 1 ms) Four inputs (I2 through I5) Minimum turn on pulse width: 40 s maximum Minimum turn off pulse width: 150 s maximum Total 4 points Single/two-phase selectable: 50 kHz (1 point) Single-phase: 5 kHz (3 points) 0 to 65535 (16 bits) Rotary encoder mode, adding counter mode 1 point 2 points 0 to 255 RS232C - maintenance communication, user communication, Modbus slave communication Possible Possible Possible Clock Cartridge (option) Possible Possible Possible Memory Cartridge (option) Possible Possible Possible HMI Module (option) Possible Possible Possible *1: 1 step equals 6 bytes. *2: Not including clock function processing time, data link processing time, and interrupt processing time. *3: Not expandable with expansion I/O modules. *4: Maintenance communication, user communication, Modem communication, data link, Modbus master/slave communication. 2 FC5A 12V DC Power Type CPU Module **Input Specifications Type No. Input Points Rated Input Voltage Input Voltage Range Rated Input Current Input Impedance Turn ON Time Turn OFF Time Isolation Input Type External Load for I/O Interconnection Single Determination Method Effect of Improper Input Connection Cable Length FC5A-C10R2D FC5A-C16R2D FC5A-C24R2D 6 9 14 (6/1 common) (9/1 common) (14/1 common) 12V DC sink/source input signal 10.2 to 18V DC I0 and I1: 6 mA I2 to I7, I10 to I15: 6 mA I0 and I1: 1.8 k I2 to I7, I10 to I15: 2.0 k I0 and I1: 2 s + filter value I2 to I5: 35 s + filter value I6, I7, I10 to I15: 40 s + filter value I0 and I1: 16 s + filter value I2 to I5: 150 s + filter value I6, I7, I10 to I15: 150 s + filter value Between input terminals: Not isolated Internal circuit: Photocoupler isolated Type 1 (IEC61131-2) Not needed Static Both sinking and sourcing input signals can be connected. If any input exceeding the rated value is applied, permanent damage may be caused. 3m in compliance with electromagnetic immunity Installation **When the CPU module is mounted in the standard upright position, all I/O points can be turned on simultaneously at up to 55C operating temperature. **The CPU module can be installed facing upwards when the operating temperature is below 35C or sideways when the operating temperature is below 40C. Upwards Operating temperature below 35C Sideways Operating temperature below 40C Dimensions **FC5A-C10R2D, FC5A-C16R2D 80.0 70.0 Maximum Load Current Minimum Switching Load Initial Contact Resistance Electrical Life Mechanical Life Rated Load Dielectric Strength For information on communication adapter, HMI module, memory cartridge, and clock cartrige, see catalog No. EP1203. 4.5 Output Type 8.5 mm when the clamp is pulled out. **FC5A-C24R2D 95.0 70.0 90.0 COM0 COM1 COM2 COM3 Output Points per Common Line FC5A-C10R2D FC5A-C16R2D FC5A-C24R2D 4 7 10 3 4 4 1 2 4 -- 1 1 -- -- 1 1NO 2A per point 8A per common line 0.1 mA/0.1V DC (reference value) 30 m maximum 100,000 operations minimum (rated load 1,800 operations/hour) 20,000,000 operations minimum (no load 18,000 operations/hour) 240V AC/2A (resistive load, inductive load cos o = 0.4) 30V DC/2A (resistive load, inductive load L/R =7 ms) Between output and terminals: 1,500V AC, 1 minute Between output terminal and internal circuit: 1,500V AC, 1 minute Between output terminals (COMs): 1,500V AC, 1 minute 4.5 Type No. No. of Outputs 90.0 **Relay Output Specifications 8.5 mm when the clamp is pulled out. Mounting Hole Layout **FC5A-C24R2D **FC5A-C10R2D FC5A-C16R2D 95.0 80.0 Internal Circuit X0, X1 COM Input X2 to X15 COM 90.0 83.0 1.8 k 4.3 4.3 2-o 2-o 68.0 83.0 All dimensions in mm. 2.0 k Internal Circuit Input 90.0 83.0 Input Internal Circuit 3 FC5A 12V DC Power Type CPU Module Types * FC5A CPU Modules (12V DC Power) Type High-speed Counter Pulse Input High-speed counter Maximum input frequency: 50 kHz All-in-One * Web Server Module Type No. FC4A-SX5ES1E FC4A-KC3C FC9Y-B919 * HMI Module Input Type 12V DC (sink/source) 12V DC Package Quantity: 1 Type Web Server Module Web Server Cable Web Server Module User's Manual HMI Module Power Voltage Type No. FC4A-PH1 * Programming Software Type Programming and Monitoring Software WindLDR Ver. 5.* Package Quantity: 1 Type No. FC9Y-LP2CDW Relay output 2A 240V AC, 2A 30V DC, 2A Package Quantity: 1 I/O Points 6/4 points Type No. FC5A-C10R2D 9/7 points FC5A-C16R2D 14/10 points FC5A-C24R2D **Option Name RS232C, Mini DIN Communication RS485, Mini DIN Adapter RS485, Terminal Block Clock Cartridge Package Quantity: 1 Type Output Type Memory Cartridge 32KB 64KB RS232C/RS485 Converter AC Adapter Aluminium (package quantity 10) 35-mm-wide DIN Rail Steel (package quantity 10) End Clip (package quantity 10) FC5A User's Manual* Computer Link Cable 4C (3m long) Modem Cable 1C (3m long) User Communication Cable 1C (2.4m long) O/I Communication Cable 1C (5m long) for connecting HG1F to MicroSmart port 1 and 2 O/I Communication Cable (3m long) for connecting HG1F to MicroSmart port 2 O/I Communication Cable 2C (5m long) for connecting HG2F/3F4F to MicroSmart port 1 and 2 O/I Communication Cable (5m long) for connecting HG2F/3F4F to MicroSmart port 2 *For update information, visit http://smart.idec.com Type No. FC4A-PC1 FC4A-PC2 FC4A-PC3 FC4A-PT1 FC4A-PM32 FC4A-PM64 FC2A-MD1 PFA-1A31 BAA1000PN10 BAP1000PN10 BNL6PN10 FC9Y-B927 FC2A-KC4C FC2A-KM1C FC2A-KP1C FC4A-KC1C HG9Z-XC183 FC4A-KC2C HG9Z-3C125 FC5A FC4A Micro Programmable Logic Controllers High Performance MicroSmart FC4A/FC5A Solves Various Applications FC5A with IDEC Logic Engine acheives world class processing speed Programming and Monitoring Software WindLDR Ver.5.* **CPU Module (FC5A) Type Slim Type (DC power type) All-in-One Type (AC power type) All-in-One Type (24V DC power type) Type No. I/O Points FC5A-D16RK1 8/8 points FC5A-D16RS1 8/8 points FC5A-D32K3 16/16 points FC5A-D32S3 16/16 points FC5A-C10R2 6/4 points FC5A-C16R2 9/7 points FC5A-C24R2 14/10 points FC5A-C10R2C 6/4 points FC5A-C16R2C 9/7 points FC5A-C24R2C 14/10 points (FC4A) Type Slim Type (DC power type) All-in-One Type (AC power type) All-in-One Type (DC power type) Type No. I/O Points **Expansion I/O Module Module See catalog no. EP1203 for details I/O Points Variations 8 points 2 types 16 points 2 types 32 points 1 types 8 points 3 types 16 points 3 types 24/16 points 32 points 2 types FC4A-C10R2 6/4 points 4/4 points 1 types FC4A-C16R2 9/7 points 16/8 points 1 types FC4A-C24R2 14/10 points 2/1 points 2 types FC4A-C10R2C 6/4 points 2 inputs 1 types FC4A-C16R2C 9/7 points 1 output 1 types FC4A-C24R2C 14/10 points 8 inputs 2 types 4 inputs 1 types 2 outputs 1 types FC4A-D20K3 12/8 points FC4A-D20S3 12/8 points FC4A-D20RK1 12/8 points FC4A-D20RS1 12/8 points FC4A-D40K3 24/16 points FC4A-D40S3 Input Modules Output Modules Mixed I/O Modules Analog Modules Specifications and other descriptions in this leaflet are subject to change without notice. 7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan Tel: +81-6-6398-2571, Fax: +81-6-6392-9731 E-mail: products@idec.co.jp IDEC CORPORATION (USA) Tel: +1-408-747-0550 / (800) 262-IDEC (4332) Fax: +1-408-744-9055 / (800) 635-6246 E-mail: opencontact@idec.com IDEC CANADA LIMITED Tel: +1-905-890-8561, Toll Free: (888) 317-4332 Fax: +1-905-890-8562 E-mail: sales@ca.idec.com IDEC AUSTRALIA PTY. LTD. www.idec.com 4 Tel: +61-3-9763-3244, Toll Free: 1800-68-4332 Fax: +61-3-9763-3255 E-mail: sales@au.idec.com IDEC ELECTRONICS LIMITED IDEC IZUMI (H.K.) CO., LTD. IDEC ELEKTROTECHNIK GmbH IDEC TAIWAN CORPORATION Tel: +44-1256-321000, Fax: +44-1256-327755 E-mail: sales@uk.idec.com Tel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24 E-mail: service@idec.de IDEC (SHANGHAI) CORPORATION Tel: +86-21-5353-1000, Fax: +86-21-5353-1263 E-mail: idec@cn.idec.com Tel: +852-2803-8989, Fax: +852-2565-0171 E-mail: info@hk.idec.com Tel: +886-2-2698-3929, Fax: +886-2-2698-3931 E-mail: service@idectwn.com.tw IDEC IZUMI ASIA PTE. LTD. Tel: +65-6746-1155, Fax: +65-6844-5995 E-mail: info@sg.idec.com Cat. No. EP1245-0 MAY 2008 PDF