SFH6286-4T - Vishay [Semiconductors]

Document Number: 83722 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com

Rev. 1.9, 24-Mar-11 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, AC Input, Low Input Current

SFH628A, SFH6286

Vishay Semiconductors

DESCRIPTION

The SFH628A (DIP) and SFH6286 (SMD) feature a high

current transfer ratio, low coupling capacitance and high

isolation voltage. These couplers have a GaAs infrared

emitting diode, which is optically coupled to a silicon planar

phototransistor detector, and is incorporated in a plastic

DIP-4 or SMD package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

The couplers are end-stackable with 2.54 mm lead spacing.

Creepage and clearance distances of > 8 mm are achieved

with option 6. This version complies with IEC 60950

(DIN VDE 0805) for reinforced insulation to an operation

voltage of 400 VRMS or DC.

FEATURES

• High common mode interference immunity

• Isolation test voltage, 5300 VRMS

• Low coupling capacitance

• Good CTR linearity depending on forward

current

• Low CTR degradation

• High collector emitter voltage, VCEO = 55 V

• Compliant to RoHS Directive to 2002/95/EC and in

accordance WEEE 2002/96/EC

APPLICATIONS

• Telecom

• Industrial controls

• Battery powered equipment

• Office machines

AGENCY APPROVALS

• UL1577, file no. E52744 system code H

• DIN EN 60747-5-2 (VDE0884)/DIN EN 60747-5-5

(pending), available with option 1

• BSI IEC 60950; IEC 60065

Note

• Additional options may be possible, please contact sales office.

(1) Also available in tubes; do not add T to end.

i179080-3

A/C

C/A

DIP-4 SMD-4 pin groove 1

ORDERING INFORMATION

SFH628x-#X0##T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/PACKAGE

CTR (%)

SFH628A SFH6286

UL, BSI 63 to 200 100 to 320 160 to 500 63 to 200 100 to 320 160 to 500

DIP-4

SFH628A-2T

(1)

SFH628A-3 SFH628A-4 - - -

SMD-4, option 9

SFH6286-2T

(1)

SFH6286-3T

(1)

SFH6286-4T

(1)

VDE,

UL, BSI 63 to 200 100 to 320 160 to 500 63 to 200 100 to 320 160 to 500

DIP-4

- SFH628A-3X001 - - - -

DIP-4, 400 mil, option 6

SFH628A-2X016 SFH628A-3X016 SFH628A-4X016 - - -

SMD-4, option 7

- SFH628A-3X017T - - - -

SMD-4, option 8

SFH628A-2X018 - - - - -

SMD-4, option 9 -

- - SFH6286-2X001T SFH6286-3X001T

SFH6286-4X001

> 0.1 mm

10.16 mm > 0.7 mm

7.62 mm

DIP-#

Option 7

Option 6

Option 9

9.27 mm

Option 8

www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83722

2Rev. 1.9, 24-Mar-11

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

SFH628A, SFH6286

Vishay Semiconductors Optocoupler, Phototransistor Output,

AC Input, Low Input Current

Notes

• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

maximum ratings for extended periods of the time can adversely affect reliability.

(1)Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through

hole devices (DIP).

Note

• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

DC forward current IF± 50 mA

Surge forward current t  10 μs IFSM ± 2.5 A

Power dissipation Pdiss 76 mW

OUTPUT

Collector emitter voltage VCE 55 V

Emitter collector voltage VEC 7V

Collector current IC50 mA

tp  1 ms IC100 mA

Power dissipation Pdiss 150 mW

COUPLER

Isolation test voltage VISO 5300 VRMS

Creepage distance 7mm

Clearance distance 7mm

Insulation thickness between 0.4 mm

Comparative tracking index per DIN IEC112/ 175

Isolation resistance VIO = 500 V, Tamb = 25 °C RIO 1012 

VIO = 500 V, Tamb = 100 °C RIO 1011 

Storage temperature range Tstg - 55 to + 150 °C

Ambient temperature range Tamb - 55 to +100 °C

Soldering temperature (1) max. 10 s, dip soldering distance Tsld 260 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

INPUT

Forward voltage IF = ± 5 mA VF1.1 1.5 V

Capacitance VR = 0 V, f = 1 MHz CO45 pF

Thermal resistance Rthja 1070 K/W

OUTPUT

Collector emitter leakage current VCE = 10 V ICEO 10 200 nA

Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE 7pF

Thermal resistance Rthja 500 K/W

COUPLER

Collector emitter saturation

voltage

IF = ± 1 mA, IC = 0.5 mA SFH628A-2 VCEsat 0.25 0.4 V

SFH6286-2 VCEsat 0.25 0.4 V

IF = ± 1 mA, IC = 0.8 mA SFH628A-3 VCEsat 0.25 0.4 V

SFH6286-3 VCEsat 0.25 0.4 V

IF = ± 1 mA, IC = 1.25 mA SFH628A-4 VCEsat 0.25 0.4 V

SFH6286-4 VCEsat 0.25 0.4 V

Document Number: 83722 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com

Rev. 1.9, 24-Mar-11 3

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

SFH628A, SFH6286

Optocoupler, Phototransistor Output,

AC Input, Low Input Current Vishay Semiconductors

Fig. 1 - Test Circuit Fig. 2 - Test Circuit and Waveforms

Note

• As per IEC 60747-5-5, § 7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with

the safety ratings shall be ensured by means of protective circuits.

CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

IC/IF

IF = ± 1 mA, VCE = 0.5 V SFH628A-2 CTR 63 200 %

SFH6286-2 CTR 63 200 %

IF = ± 0.5 mA, VCE = 1.5 V SFH628A-2 CTR 32 100 %

SFH6286-2 CTR 32 100 %

IF = ± 1 mA, VCE = 0.5 V SFH628A-3 CTR 100 320 %

SFH6286-3 CTR 100 320 %

IF = ± 0.5 mA, VCE = 1.5 V SFH628A-3 CTR 50 160 %

SFH6286-3 CTR 50 160 %

IF = ± 1 mA, VCE = 0.5 V SFH628A-4 CTR 160 500 %

SFH6286-4 CTR 160 500 %

IF = ± 0.5 mA, VCE = 1.5 V SFH628A-4 CTR 80 250 %

SFH6286-4 CTR 80 250 %

SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Turn-on time VCC = 5 V, IC = 2 mA, RL = 100 ton 6μs

Rise time VCC = 5 V, IC = 2 mA, RL = 100 tr3.5 μs

Turn-off time VCC = 5 V, IC = 2 mA, RL = 100 toff 5.5 μs

Fall time VCC = 5 V, IC = 2 mA, RL = 100 tf5μs

isfh618a_11

±IF

47 Ω

VCC

isfh618a_12

10 %

90 %

Input pulse

Output pulse

ton

toff

SAFETY AND INSULATION RATINGS

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Climatic classification

(according to IEC 68 part 1) 55/100/21

Comparative tracking index CTI 175 399

VIOTM 10000 V

VIORM 890 V

PSO 400 mW

ISI 275 mA

TSI 175 °C

Creepage distance Standard DIP-8 7 mm

Clearance distance Standard DIP-8 7 mm

Creepage distance 400 mil DIP-8 8 mm

Clearance distance 400 mil DIP-8 8 mm

Insulation thickness,

reinforced rated per IEC 60950 2.10.5.1 0.4 mm

www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83722

4Rev. 1.9, 24-Mar-11

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

SFH628A, SFH6286

Vishay Semiconductors Optocoupler, Phototransistor Output,

AC Input, Low Input Current

TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Fig. 3 - Current Transfer Ratio (typ.)

Fig. 4 - Current Transfer Ratio (typ.)

Fig. 5 - Diode Forward Voltage (typ.)

Fig. 6 - Diode Forward Voltage (typ.)

Fig. 7 - Transistor Capacitance

Fig. 8 - Output Characteristics

240

280

200

160

- 40 - 20 0 20 40 60 80

100

isfh618a_01 TA (°C)

120

CTR (%)

IF = 5mA

IF = 1mA

IF = 2mA

IF = 0.5mA

VCE = 0.5 V, CTR = f (TA)

240

280

200

160

- 40 - 20 0 20 40 60 80

100

isfh618a_02

(°C)

120

CTR (%)

IF = 5mA

IF = 1mA

IF = 2mA

IF = 0.5mA

1.15

1.2

1.1

1.05

isfh618a_03

(mA)

0.95

0.9

VR (V)

TA = 25 ºC, VF = f (IF)

10-1 100101

1.15

1.2

1.1

- 40 - 20 0 20 40 60 80

100

isfh618a_04

(°C)

1.05

0.95

VF (V)

IF = 1.0 mA, VF = f (TA)

isfh618a_05

(V)

(pF)

TA = 25 ºC, f = 1.0 MHz

CEE = f (VCE)

10-1 100101102

10-2

isfh618a_06 VCE (V)

ICE (mA)

TA = 25 ºC,

CE = f

(VCE, IF)

10-1 100101102

10-2

IF = 5 mA

IF = 2 mA

IF = 1 mA

IF = 0.5 mA

Document Number: 83722 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com

Rev. 1.9, 24-Mar-11 5

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

SFH628A, SFH6286

Optocoupler, Phototransistor Output,

AC Input, Low Input Current Vishay Semiconductors

Fig. 9 - Permissible Forward Current Diode

Fig. 10 - Permissible Power Dissipation

Fig. 11 - Switching Times (Typ.)

PACKAGE DIMENSIONS in millimeters

100

0255075

100

isfh618a_07

(°C)

/F (mA)

IF = f (TA)

200

150

125

175

0 255075

100

isfh618a_08 TA (°C)

100

Ptot (mW)

Ptot = f (TA)

Transistor

Diode

103

102

101

100

isfh618a_09

(Ω)

t (µs)

103104105

102

t off

TA = 25 ºC, IF = 1.0 mA,

VCC = 5.0 V, tON, tR,

tOFF, tF, = f (RL)

i178027-8

6.48

6.81

4.55

4.83

10°

0° to 15°

0.2

0.3

7.62 typ.

2.79

3.30

5.84

6.35

0.76

1.14

4°

typ.

2.54

3.30

3.81

0.508

0.89

0.46

0.56

0.79 typ.

1.27 typ.

1.27

ISO method A

Pin 1 identification

www.vishay.com For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83722

6Rev. 1.9, 24-Mar-11

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

SFH628A, SFH6286

Vishay Semiconductors Optocoupler, Phototransistor Output,

AC Input, Low Input Current

PACKAGE MARKING

Notes

• Only options 1, 7 and 8 are reflected in the package marking.

• The VDE Logo is only marked on option1 parts.

• Tape and reel suffix (T) is not part of the package marking.

i178029-1

0.508

1.020

0.25 typ.

10°

3° to 7°

9.52

10.03

7.52

7.90

8 min.

Lead

coplanarity

0.004 max.

6.48

6.81

3 4

4.55

4.83

0.76

1.14

4° typ.

2.54 typ.

3.30

3.81

0.249

0.102

0.79 typ.

1.27 typ.

SMD

ISO method A

2.54 R 0.25

1.78

0.76

8 min. 1.52

11.05

PIN 1 IDENTIFICATION

Option 6 Option 7

20802-23

Option 8

2.54

1.78 0.76

8 min.

1.52

11.05

9.95 min.

R 0.25

2.54

1.78 0.76

1.52

R 0.25

10.16 typ.

7.62 typ.

8 min.

7.62 typ.

4.3 ± 0.3

0.6 min.

10.3 max.

0.7 min.

7.62 typ.

12.1 max.

9.27 min.

3.5 ± 0.3

2.55 ± 0.25

0.1 min.

0.25 ± 0.1

3.5 ± 0.3

21764-107

SFH628A-3

V X001

YWW H 68

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.