Keysight 8491A/B, 8493A/B/C, 11581A, 11582A and 11583C Coaxial Attenuators Technical Overview - High accuracy - Low SWR - Broadband frequency coverage - Small size Description The Keysight Technologies's coaxial fixed attenuators provide precision attenuation, flat frequency response, and low SWR over broad frequency ranges (dc to 26.5 GHz) at low prices. Attenuators are available in eight attenuation values: 3, 6, 10, 20, 30, 40, 50, and 60 dB; with performances specified from dc to 26.5 GHz; and with choice of four connector types: Type-N, SMA1, and APC 3.52. These attenuators are all tested on a state-of-the-art precision analyzerto assure specifications over the full frequency ranges. Although the 8493C is not specified above 26.5 GHz, it performs resonance free to 34 GHz with only a small loss in performance. Precision construction Quality assurance in testing The attenuators employ a film on an attenuator card as the resistive element. The uniformity and repeatability of the film deposition process result in high accuracy and low SWR over very wide frequency ranges. The flat frequency response and low SWR of the attenuators areassured over the entire frequency range by full frequency band testing on a stateof-the-art precision analyzer. Full frequency band testing ensures that narrow resonances in the frequency band are not over-looked. Actual attenuation values taken at dc, 4, 8, 12, 18, and 26.5GHz are stamped on the attenuator body for permanent and easy reference. The 8493C features thin-filmtantalumnitride on a sapphire substrate for exceptional precision performance to 26.5 GHz. In fact, it performs resonance-free to 34 GHz, the top frequency limit of the APC-3.5 connector. The choice of connector type andmaterial also ensure accurate and repeatable attenuation. The 8491A/B attenuators are furnished with Type-N connectors whose dimensions are compatible with either MIL-C-71 or MIL-C-39012 connector specifications. These connectors are stainless steel for long wear and high repeatability. The 8493A/B attenuators are furnished withSMA type connectors. The connectors are heat treated beryllium copperfor greater strength and wear. The 8493C is furnished with theAPC 3.5 connector which is compatible with standard SMA connectors but is more rugged and offers improved repeatability over hundreds of connections. 1. As per USASI Committee C83.2 compatible with OSM, ARM, WPM, BRM, NPM, etc. 2. Mate with MIL-C-71 or MIL-C-39012 connectors. 2 Testing each attenuator with a stateof-the-art precision analyzer brings standards lab accuracy to production testing because the system can determine its own measurement uncertainties and compensate for them in the testing process. System calibration is derived from precise physical standards which are directly traceable to the National Bureau of Standards. In addition, automatic testing eliminates the possibility of human error in setting instrument controls, taking data, or making calculations. Applications Ruggedness, reliability and small size make these attenuators useful both on the bench and in systems applications. With their high accuracy and low SWR they are ideally suited for extending the range of sensitive power meters for higher power measurements and for "padding" poorly matched devices to improve system SWR. These same characteristics lend themselves to applications as calibration standards in attenuation and RF substitution measurements. With their broad dc to 26.5 GHz frequency range and reasonable cost, general applications, such as the reduction of power level to sensitive components and instrumentation systems, are attractive and appropriate uses for these attenuators. Accuracy The accuracy of an attenuator directly affects the accuracy of the measurement where the attenuator is used. In fact, attenuators are used extensively as the standard against which other instruments or devices are calibrated. Aglilent's fixed attenuators achieve flat frequency response (typically a few hundredths of a dB) and overall accuracy (typically 2 % of value in dB at 26.5 GHz) through the use of thin-film attenuator cards. These cards are composed of high stability tantalum nitride resistive film deposited on a sapphire or alumina substrate. Quality assurance in specifications The following examples demonstrate the reliability and comprehensiveness of specifications. Although the absolute accuracy for a 3 dB attenuator is specified as 0.3 dB, test data statistics indicate an expected value of 3 dB 0.20 dB from dc to 18 GHz. Similarly a 30 dB attenuator is specified as 1.0 dB, but typically is no worse than 30 dB 0.75 dB from dc to 18 GHz. The other attenuation values are also specified as conservatively. In addition, Keysight precision attenuators meet more comprehensive performance standards. Linear phase response is an example. Not only is wide bandwidth significant, but also linear phase response is an important parameter for applications where pulse distortion must be kept to a minimum. The excellent linearity of the Aglilent attenuators is typified in the accompanying illustration of an actual network analyzer measurement. Center trace is phase response of 8491A -6 dB attenuator from 1.0 to 2.0 GHz taken with the 8410 network analyzer. Top and bottom traces are 1 calibration. Linear phase component has been compensated for with a line stretcher. Response, therefore, shows nonlinear phase deviation of < 1/2 over 1 to 2 GHz band. 3 Economy Automated procedures have resulted in economies of scale in production and testing. The automated resistive film deposition process permits highvolume manufacture with excellent yield. Furthermore, characteristics are consistently uniform; hand "touchup" is not required to meet specifications. Automatic testing means exceptionallythorough, high-accuracy measurements can be performed in appreciably shorter time than could be done manually. The overall result is outstanding attenuator performance at attractive prices. Calibration Data Optional calibration data Use of calibration data has always been an effective means of reducing measurement uncertainty at RF and microwave frequencies. This data is available for Keysight's fixed attenuators as Option 849xx- UK6. Data which is generated by an automatic network analyzer provides a tabulated list of attenuation and SWR's at 26 to 67 frequencies (see table 2). Measurements to 60 dB are directly traceable to NBS standards and feature very low measurement uncertainties. Option 849xx-UK6 data is available when the attenuators are first purchased and recalibrations are available through Keysight Customer Service Centers around the world. Table 1. SWR data uncertainties Frequency range (GHz) Measured SWR 1.0 to 1.35 Measured SWR 1.35 to 1.86 Male Type -N dc to 12.4 12.4 to 18.0 0.025 0.031 0.041 0.050 Female Type -N dc to 8.0 8.0 to 12.4 12.4 to 18.0 0.025 0.031 0.042 0.046 0.063 0.071 Male SMA dc to 8.0 8.0 to 12.4 12.4 to 18.0 0.031 0.045 0.077 0.054 0.084 0.137 Female SMA dc to 8.0 8.0 to 12.4 12.4 to 18.0 0.054 0.077 0.122 0.088 0.132 0.206 Male APC-3.5 dc to 8.0 8.0 to 12.4 12.4 to 18.0 0.025 0.031 0.045 0.041 0.050 0.067 dc to 10 10 to 18 18 to 26.5 0.020 0.025 0.035 0.031 0.037 0.050 Connector type Female APC-3.5 Table 2. Coaxial attenuator calibration frequencies* (MHz) 100 4500 9000 13000 16750 500 5000 9500 13500 17000 1000 5500 10000 14000 17250 1500 6000 10500 14500 17500 2000 6500 11000 15000 17750 2500 7000 11500 15500 18000 3000 7500 12000 16000 3500 8000 12400 16250 (each 250 MHz to 26.5 GHz 4000 8500 12500 16500 *dc to 12.4 GHz models include 26 frequencies, dc to 18 GHz models include 42 frequencies, dc to 26.5 GHz models include 67 frequencies (2 to 26.5 GHz). Table 3. Attenuation data uncertainties Attenuation (dB) 8491, 8492 and 8493 Attenuation data uncertainty (dB) 0.1 to 2.0 GHz 2 to 6 GHz 6 to 12.4 GHz 12.4 to 18.0 GHz 18.0 to 26.5 GHz 3 0.07 0.06 0.07 0.11 .15 6 0.07 0.07 0.07 0.11 .15 10 0.08 0.07 0.08 0.12 .15 20 0.09 0.08 0.09 0.13 .15 30 0.12 0.11 0.12 0.15 0.18 40 0.15 0.14 0.15 0.21 0.25 50 0.23 0.23 0.23 0.34 n/a 60 0.50* 0.48* 0.90* 0.90* n/a *The uncertainties noted represent 99.7% probability values. 4 Specifications: Specifications describe the instruments warranted performance. Supplemental characteristics (shown in italics) are intended to provide information useful in applying the instrument by giving typical, but non-warranted, performance parameters. Frequency Range: 8491A and 8493A, dc to 12.4 GHz 8491B, 8493B, dc to 18 GHz 8493C, dc to 26.5 GHz Attenuation Accuracy: 8491A/93A 8491B/93B 8493C dc to 12.4 GHz dc to 12.4 / 12.4 to 18 GHz dc to 18 / 18 to 26.5 GHz 3 db 0.3 dB 0.3 dB 0.5 dB / 1.0 dB 6 dB 0.3 dB 0.3 dB / 0.4 dB 0.6 dB 10 dB 0.5 dB 0.6 dB 0.3 dB / 0.5 dB 20 dB 0.5 dB 0.6 dB / 1.0 dB 0.5 dB / 0.6 dB 30 dB 1.0 dB 1.0 dB 0.7 dB / 1.0 dB 8491A only 8491B/92A only 1.5 dB 1.5 dB 1.0 dB / 1.3 dB 40 dB 50 dB 1.5 dB 1.5 dB N/A 60 dB 2.0 dB 2.0 dB N/A SWR: 8491B/8493B 8493C 8491A/8493A dc to 8 (GHz) 8 to 12.4 (GHz) 12.4 to 18 (GHz) dc to 8 8 to 12.4 12.4 to 26.5 3 db 1.25 1.35 1.5 1.10 1.15 1.25 6 dB 1.2 1.3 1.5 1.10 1.15 1.27 10 dB 1.2 1.3 1.5 1.10 1.15 1.25 20 dB 1.2 1.3 1.5 1.10 1.15 1.25 30 dB 1.2 1.3 1.5 1.10 1.15 1.25 8491B only 8491A/B only 40 dB 1.2 1.3 1.5 1.10 1.15 1.25 50 dB 1.2 1.3 1.5 N/A N/A N/A 60 dB 1.2 1.3 1.5 N/A N/A N/A 5 Temperature: Operating 0C to +55C Storage -55C to +85C Humidity: Operating <95% relative at 40C Storage <95% relative at 40C Altitude: Operating <4,600 meters (15,000 feet) Storage <15,300 meters (50,000 feet) EMC Radiated interference is within the requirements of MIL STD 461 method RE02, VDE 0871 EN55011 and FCC part 18 Environmental: 8491 A 8493A 8491B 8493B 8493C Type-N2 SMA1 Type-N2 SMA1 APC-3.5 67 X 21 40 X 13 67 X 21 40 X 13 33.8 X 8 36.8 X 8 2 7/16 X 13/16 D 1 9/16 X 1/2 D 2 7/16 X 13/16 D 1 9/16 X 1/2 D 1 5/16 X 5/16 D 1 7/16 X 5/16 D Net 110 g (4 oz) 30 g (1 oz) 110 g (4 oz) 30 g (1 oz) 8.5 g (0.3 oz) 9.4 g (0.33 oz) Shipping 220 g (8 oz) 220 g (8 oz) 220 g (8 oz) 220 g (8 oz) 45 kg (1 lb) Connectors (50 ) Dimensions Millimeters Inches Weight 3,6,10,20 dB 30,40 dB Supplemental Characteristics: Temperature stability: 0.000l dB/dB/C (all except 8493C) 0.0002 dB/dB/C (8493C) Maximum input power: 2 W avg., 100 W peak3 Power sensitivity: 0.001 dB/dB/W (all except 8943) 0.001 dB/W (8493C) Attenuator Sets 11581A/11582A/11583C A calibrated set of four fixed coaxial attenuators (3, 6, 10, and 20 dB) is available. Each set includes a calibration report certified traceable to the National Bureau of Standards. The reports included with the 11581A, 11582A, and 11583C indicate the accuracy of measurement and list the attenuation and reflection coefficient at each port of the attenuator. The set of four attenuators is furnished in a handsome walnut accessory case. In addition to protecting the units when not in use, the case is also a convenient storage place for the attenuators and the calibration reports. Calibration data as described on page 4 is included with rack attenuator set. Ordering Information To order, basic model number and option (specifies attenuation value) must be specified. Option 849xx-UK6 calibration data can also be ordered with the basic model number and attenuation value option. Please note, Option 849xx-UK6 is not available with 11581/2A nor 11583C. Attenuation options Atten 8491A/B options 8491A/B options 8491A/B options 3 dB 8491x-003 8493x-003 8493C-003 Option 006 6 dB 8491x-006 8493x-006 8493C-006 Option 010 10 dB 8491x-010 8493x-010 8493C-010 Option 003 1. As per USASI Committee C83.2 compatible with OSM, ARM, WPM, BRM, NPM, etc. 2. Mate with MIL-C-71 or MIL-C-39012 connectors 3. At 20C derated to l.3 W avg. at 55C. Option 020 20 dB 8491x-020 8493x-020 8493C-020 Option 030 30 dB 8491x-030 8493x-030 8493C-030 Option 040 40 dB 8491x-040 Option 050 50 dB 8491x-050 Option 060 60 dB 8491x-060 Note: x = A or B 6 8493C-040 8491A/B 8493A/B 8493C 7 08 | Keysight | 8491A/B, 8493A/B/C, 11581A, 11582A and 11583C Coaxial Attenuators - Technical Overview myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA(R) Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. www.keysight.com/quality Keysight Electronic Measurement Group DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight's measurement expertise and product breadth, combined with channel partner convenience. ATCA(R), AdvancedTCA(R), and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. www.keysight.com/find/mta For more information on Keysight Technologies' products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 0800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-06-09-14) This information is subject to change without notice. (c) Keysight Technologies, 2012-2014 Published in USA, August 2, 2014 5953-6475 www.keysight.com