www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.003/10/12
PCB Horizontal Mounting
Specications:
Contact Conguration : DPDT
Switch Operation : On-Off-On
Contact Current Max : 100mA
Switch Terminals : Through Hole
Contact Voltage : 20V
Actuator Style : Bat
Switch Mounting : PCB
Contact Plating : Gold
No. of Poles : 1
Electrical Life : 50,000 make-and-break cycles at full load
Contact Resistance : 20mΩ max. initial at 2V - 4V DC
100mA for both silver and gold plated contacts
Insulation Resistance : 1,000MΩ min.
Dielectric Strength : 1,000V RMS at sea level
Operating Temperature : -30°C to +85°C
Materials:
Case and Bushing : Glass lled nylon 6/6, retardant, heat stabilized
Actuator : Brass, Chrome plated. Internal O-ring seal,
standard for all actuators
Switch Support : Brass, Tin plated
Terminal/Contact : Silver or gold plated
Rating:
R : 0.4 Volt-Amp (VA) max. at 20V max. (AC or DC)
Q : 1 Amp at 250V AC 3 Amp at 120V AC or 28V DC
Features:
• Process sealed - withstands machine soldering and pressure
wash processes
• Epoxy sealed terminations
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.003/10/12
PCB Horizontal Mounting
Description Switch Operation Part Number
Switch, PCB, DPDT, Horiz DPDT on-off-on 2AD3T2A2M6RE
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Switch Function
Dimensions : Millimetres (Inches)
Subminiature, Washable
P.C. Mounting
Position 1 Position 2 Position 3
Terminal
Common 2-3, 5-6 2-1, 5-4
SCHEMATIC OPEN