IRFR9220TRL - Vishay [Siliconix]

Document Number: 91283 www.vishay.com

S10-1139-Rev. D, 17-May-10 1

Power MOSFET

IRFR9220, IRFU9220, SiHFR9220, SiHFU9220

Vishay Siliconix

FEATURES

•Halogen-free According to IEC 61249-2-21

Definition

• Dynamic dV/dt Rating

• Repetitive Avalanche Rated

• Surface Mount (IRFR9220, SiHFR9220)

• Straight Lead (IRFUFU9220, SiHFU9220)

• Available in Tape and Reel

• P-Channel

•Fast Switching

• Compliant to RoHS Directive 2002/95/EC

DESCRIPTION

Third Power MOSFETs technology is the key to Vishay

advanced line of Power MOSFET transistors. The efficient

geometry and unique processing of the Power MOSFETs

design achieve very low on-state resistance combined with

high transconductance and extreme device ruggedness.

The DPAK is designed for surface mounting using vapor

phase, infrared, or wave soldering techniques. The straight

lead version (IRFU, SiHFU series) is for through-hole

mounting applications. Power dissipation levels up to 1.5 W

are possible in typical surface mount applications.

Note

a. See device orientation.

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. VDD = - 50 V, Starting TJ = 25 °C, L = 35 mH, Rg = 25 Ω, IAS = - 3.6 A (see fig. 12).

c. ISD ≤ - 3.9 A, dI/dt ≤ 95 A/μs, VDD ≤ VDS, TJ ≤ 150 °C.

d. 1.6 mm from case.

e. When mounted on 1" square PCB (FR-4 or G-10 material).

PRODUCT SUMMARY

VDS (V) - 200

RDS(on) (Ω)V

GS = - 10 V 1.5

Qg (Max.) (nC) 20

Qgs (nC) 3.3

Qgd (nC) 11

Configuration Single

P-Channel MOSFET

DPAK

(TO-252)

IPAK

(TO-251)

GDS

ORDERING INFORMATION

Package DPAK (TO-252) DPAK (TO-252) DPAK (TO-252) DPAK (TO-252) IPAK (TO-251)

Lead (Pb)-free and

Halogen-free SiHFR9220-GE3 SiHFR9220TRL-GE3aSiHFR9220TRR-GE3aSiHFR9220TR-GE3aSiHFU9220-GE3

Lead (Pb)-free IRFR9220PbF IRFR9220TRLPbFaIRFR9220TRRPbFaIRFR9220TRPbFaIRFU9220PbF

SiHFR9220-E3 SiHFR9220TL-E3aSiHFR9220TR-E3aSiHFR9220T-E3aSiHFU9220-E3

SnPb IRFR9220 IRFR9220TRLaIRFR9220TRRaIRFR9220TRaIRFU9220

SiHFR9220 SiHFR9220TLaSiHFR9220TRaSiHFR9220TaSiHFU9220

ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted

PARAMETER SYMBOL LIMIT UNIT

Drain-Source Voltage VDS - 200 V

Gate-Source Voltage VGS ± 20

Continuous Drain Current VGS at - 10 V TC = 25 °C ID

- 3.6

TC = 100 °C - 2.3

Pulsed Drain CurrentaIDM - 14

Linear Derating Factor 0.33 W/°C

Linear Derating Factor (PCB Mount)e0.020

Single Pulse Avalanche EnergybEAS 310 mJ

Repetitive Avalanche CurrentaIAR - 3.6 A

Repetitive Avalanche EnergyaEAR 4.2 mJ

Maximum Power Dissipation TC = 25 °C PD

42 W

Maximum Power Dissipation (PCB Mount)eTA = 25 °C 2.5

Peak Diode Recovery dV/dtcdV/dt - 5.0 V/ns

Operating Junction and Storage Temperature Range TJ, Tstg - 55 to + 150 °C

Soldering Recommendations (Peak Temperature) for 10 s 260d

* Pb containing terminations are not RoHS compliant, exemptions may apply

www.vishay.com Document Number: 91283

2S10-1139-Rev. D, 17-May-10

IRFR9220, IRFU9220, SiHFR9220, SiHFU9220

Vishay Siliconix

Note

a. When mounted on 1" square PCB (FR-4 or G-10 material).

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. Pulse width ≤ 300 μs; duty cycle ≤ 2 %.

THERMAL RESISTANCE RATINGS

PARAMETER SYMBOL MIN. TYP. MAX. UNIT

Maximum Junction-to-Ambient RthJA - - 110

°C/W

Maximum Junction-to-Ambient

(PCB Mount)aRthJA --50

Maximum Junction-to-Case (Drain) RthJC --3.0

SPECIFICATIONS TJ = 25 °C, unless otherwise noted

PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT

Static

Drain-Source Breakdown Voltage VDS VGS = 0 V, ID = - 250 μA - 200 - - V

VDS Temperature Coefficient ΔVDS/TJ Reference to 25 °C, ID = - 1 mA - - 0.22 - V/°C

Gate-Source Threshold Voltage VGS(th) VDS = VGS, ID = - 250 μA - 2.0 - - 4.0 V

Gate-Source Leakage IGSS V

GS = ± 20 V - - ± 100 nA

Zero Gate Voltage Drain Current IDSS

VDS = - 200 V, VGS = 0 V - - - 100 μA

VDS = - 160 V, VGS = 0 V, TJ = 125 °C - - - 500

Drain-Source On-State Resistance RDS(on) V

GS = - 10 V ID = - 2.2 Ab--1.5Ω

Forward Transconductance gfs VDS = - 50 V, ID = - 2.2 A 1.1 - - S

Dynamic

Input Capacitance Ciss VGS = 0 V,

VDS = - 25 V,

f = 1.0 MHz, see fig. 5

- 340 -

pFOutput Capacitance Coss - 110 -

Reverse Transfer Capacitance Crss -33-

Total Gate Charge Qg

VGS = - 10 V ID = - 3.9 A, VDS = - 160 V,

see fig. 6 and 13b

--20

nC Gate-Source Charge Qgs --3.3

Gate-Drain Charge Qgd --11

Turn-On Delay Time td(on)

VDD = - 100 V, ID = - 3.9 A,

Rg = 18 Ω, RD = 24 Ω, see fig. 10b

-8.8-

Rise Time tr -27-

Turn-Off Delay Time td(off) -7.3-

Fall Time tf -19-

Internal Drain Inductance LD Between lead,

6 mm (0.25") from

package and center of

die contact

-4.5-

Internal Source Inductance LS-7.5-

Drain-Source Body Diode Characteristics

Continuous Source-Drain Diode Current ISMOSFET symbol

showing the

integral reverse

p - n junction diode

--- 3.6

Pulsed Diode Forward CurrentaISM --- 14

Body Diode Voltage VSD TJ = 25 °C, IS = - 3.6 A, VGS = 0 Vb--- 6.3V

Body Diode Reverse Recovery Time trr TJ = 25 °C, IF = - 3.9 A, dI/dt = 100 A/μsb- 150 300 ns

Body Diode Reverse Recovery Charge Qrr - 0.97 2.0 μC

Forward Turn-On Time ton Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD)

Document Number: 91283 www.vishay.com

S10-1139-Rev. D, 17-May-10 3

IRFR9220, IRFU9220, SiHFR9220, SiHFU9220

Vishay Siliconix

TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted

Fig. 1 - Typical Output Characteristics, TC = 25 °C

Fig. 2 - Typical Output Characteristics, TC = 150 °C

Fig. 3 - Typical Transfer Characteristics

Fig. 4 - Normalized On-Resistance vs. Temperature

www.vishay.com Document Number: 91283

4S10-1139-Rev. D, 17-May-10

IRFR9220, IRFU9220, SiHFR9220, SiHFU9220

Vishay Siliconix

Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage

Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage

Fig. 7 - Typical Source-Drain Diode Forward Voltage

Fig. 8 - Maximum Safe Operating Area

Document Number: 91283 www.vishay.com

S10-1139-Rev. D, 17-May-10 5

IRFR9220, IRFU9220, SiHFR9220, SiHFU9220

Vishay Siliconix

Fig. 9 - Maximum Drain Current vs. Case Temperature

Fig. 10a - Switching Time Test Circuit

Fig. 10b - Switching Time Waveforms

Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case

Pulse width ≤ 1 µs

Duty factor ≤ 0.1 %

D.U.T.

- 10 V

VGS

10 %

90 %

VDS

td(on) trtd(off) tf

www.vishay.com Document Number: 91283

6S10-1139-Rev. D, 17-May-10

IRFR9220, IRFU9220, SiHFR9220, SiHFU9220

Vishay Siliconix

Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms

Fig. 12c - Maximum Avalanche Energy vs. Drain Current

Fig. 13a - Basic Gate Charge Waveform Fig. 13b - Gate Charge Test Circuit

IAS

0.01 Ω

D.U.T.

VDS

VDD

- 20 V

Driver

15 V

IAS

VDS

QGS QGD

Charge

- 10 V

D.U.T.

- 3 mA

VGS

VDS

IGID

0.3 µF

0.2 µF

50 kΩ

12 V

Current regulator

Current sampling resistors

Same type as D.U.T.

Document Number: 91283 www.vishay.com

S10-1139-Rev. D, 17-May-10 7

IRFR9220, IRFU9220, SiHFR9220, SiHFU9220

Vishay Siliconix

Fig. 14 - For P-Channel

Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon

Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and

reliability data, see www.vishay.com/ppg?91283.

P.W. Period

dI/dt

Diode recovery

dV/dt

Body diode forward drop

Body diode forward

current

Driver gate drive

Inductor current

D = P.W.

Period

Peak Diode Recovery dV/dt Test Circuit

• dV/dt controlled by Rg

• D.U.T. - device under test

D.U.T.

Circuit layout considerations

• Low stray inductance

• Ground plane

• Low leakage inductance

current transformer

• Compliment N-Channel of D.U.T. for driver

VDD

• ISD controlled by duty factor “D”

Note

a. VGS = - 5 V for logic level and - 3 V drive devices

VGS = - 10 Va

D.U.T. lSD waveform

D.U.T. VDS waveform

VDD

Re-applied

voltage

Ripple ≤ 5 % ISD

Reverse

recovery

current

Document Number: 91344 www.vishay.com

Revision: 15-Sep-08 1

Package Information

Vishay Siliconix

TO-252AA (HIGH VOLTAGE)

Notes

1. Package body sizes exclude mold flash, protrusion or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 0.10 mm per side.

2. Package body sizes determined at the outermost extremes of the plastic body exclusive of mold flash, gate burrs and interlead flash, but

including any mismatch between the top and bottom of the plastic body.

3. The package top may be smaller than the package bottom.

4. Dimension "b" does not include dambar protrusion. Allowable dambar protrusion shall be 0.10 mm total in excess of "b" dimension at maximum

material condition. The dambar cannot be located on the lower radius of the foot.

D H

MILLIMETERS INCHES

DIM. MIN. MAX. MIN. MAX.

E 6.40 6.73 0.252 0.265

L 1.40 1.77 0.055 0.070

L1 2.743 REF 0.108 REF

L2 0.508 BSC 0.020 BSC

L3 0.89 1.27 0.035 0.050

L4 0.64 1.01 0.025 0.040

D 6.00 6.22 0.236 0.245

H 9.40 10.40 0.370 0.409

b 0.64 0.88 0.025 0.035

b2 0.77 1.14 0.030 0.045

b3 5.21 5.46 0.205 0.215

e 2.286 BSC 0.090 BSC

A 2.20 2.38 0.087 0.094

A1 0.00 0.13 0.000 0.005

c 0.45 0.60 0.018 0.024

c2 0.45 0.58 0.018 0.023

D1 5.30 - 0.209 -

E1 4.40 - 0.173 -

θ0' 10' 0' 10'

ECN: S-81965-Rev. A, 15-Sep-08

DWG: 5973

Document Number: 91362 www.vishay.com

Revision: 15-Sep-08 1

Package Information

Vishay Siliconix

TO-251AA (HIGH VOLTAGE)

Notes

1. Dimensioning and tolerancing per ASME Y14.5M-1994.

2. Dimension are shown in inches and millimeters.

3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.13 mm (0.005") per side. These dimensions are measured at the

outermost extremes of the plastic body.

4. Thermal pad contour optional with dimensions b4, L2, E1 and D1.

5. Lead dimension uncontrolled in L3.

6. Dimension b1, b3 and c1 apply to base metal only.

7. Outline conforms to JEDEC outline TO-251AA.

Base

metal

Plating b1, b3

(b, b2)

(c)

Section B - B and C - C

Lead tip

(Datum A)

Thermal PAD

View A - A

Seating

plane

θ1

θ2

3 x b2

3 x b

2 x e 0.010 C B

0.25

0.010 BA

0.25

MILLIMETERS INCHES MILLIMETERS INCHES

DIM. MIN. MAX. MIN. MAX. DIM. MIN. MAX. MIN. MAX.

A 2.18 2.39 0.086 0.094 D1 5.21 - 0.205 -

A1 0.89 1.14 0.035 0.045 E 6.35 6.73 0.250 0.265

b 0.64 0.89 0.025 0.035 E1 4.32 - 0.170 -

b1 0.65 0.79 0.026 0.031 e 2.29 BSC 2.29 BSC

b2 0.76 1.14 0.030 0.045 L 8.89 9.65 0.350 0.380

b3 0.76 1.04 0.030 0.041 L1 1.91 2.29 0.075 0.090

b4 4.95 5.46 0.195 0.215 L2 0.89 1.27 0.035 0.050

c 0.46 0.61 0.018 0.024 L3 1.14 1.52 0.045 0.060

c1 0.41 0.56 0.016 0.022 θ1 0' 15' 0' 15'

c2 0.46 0.86 0.018 0.034 θ2 25' 35' 25' 35'

D 5.97 6.22 0.235 0.245

ECN: S-82111-Rev. A, 15-Sep-08

DWG: 5968

Application Note 826

Vishay Siliconix

Document Number: 72594 www.vishay.com

Revision: 21-Jan-08 3

APPLICATION NOTE

RECOMMENDED MINIMUM PADS FOR DPAK (TO-252)

0.420

(10.668)

Recommended Minimum Pads

Dimensions in Inches/(mm)

0.224

(5.690)

0.180

(4.572)

0.055

(1.397)

0.243

(6.180)

0.087

(2.202)

0.090

(2.286)

Return to Index

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.