2016-04-11 2-Chip Silicon PIN Photodiode Version 1.4 KOM 2125 Features: * Suitable for applications from 400 nm to 1100 nm * Short switching time (typ. 25 ns) Applications * Industrial electronics * For control and drive circuits * Path and angle scanning * Edge control Ordering Information Type: Photocurrent Ordering Code IP [A] Ev = 1000 lx, Std. Light A, VR = 5 V; Diode A KOM 2125 40 ( 30) (Diode A) 100 ( 75) (Diode B) 2016-04-11 1 Q65110A2703 Version 1.4 KOM 2125 Maximum Ratings (TA = 25 C) Parameter Symbol Values Unit Operating and storage temperature range Top; Tstg -40 ... 80 C Reverse voltage VR 60 V Total Power dissipation Ptot 150 mW ESD withstand voltage (acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM) VESD 2000 V Characteristics (TA = 25 C) Parameter Symbol Values Unit Photocurrent (Ev = 1000 lx, Std. Light A, VR = 5 V; Diode A) (typ (min)) IP 40 ( 30) A Photocurrent (VR = 5 V, Ee = 1 mW/cm2 , = 870 nm, Diode B) (typ (min)) IP 100 ( 75) A Wavelength of max. sensitivity (typ) S max 850 nm Spectral range of sensitivity (typ) 10% Radiant sensitive area (Diode A) (typ) A 4.00 mm2 Radiant sensitive area (Diode B) (typ) A 10.00 mm2 Dimensions of radiant sensitive area (Diode A) (typ) LxW 2x2 mm x mm Dimensions of radiant sensitive area (Diode B) (typ) LxW 2x5 mm x mm Half angle (typ) 60 Dark current (VR = 10 V; Diode A) (typ (max)) IR 5 ( 30) nA Dark current (VR = 10 V; Diode B) (typ (max)) IR 10 ( 30) nA Spectral sensitivity of the chip ( = 870 nm) (typ) S typ 0.62 A/W Quantum yield of the chip ( = 870 nm) (typ) 0.88 Electro ns /Photon Open-circuit voltage (Ev = 1000 lx, Std. Light A) (typ (min)) VO 350 ( 300) mV Short-circuit current (Ev = 1000 lx, Std. Light A; Diode A) (typ) ISC 38 A 2016-04-11 2 (typ) 400 ... 1100 nm Version 1.4 KOM 2125 Parameter Symbol Values Unit Short-circuit current (Ev = 1000 lx, Std. Light A; Diode B) (typ) ISC 95 A Rise and fall time (VR = 5 V, RL = 50 , = 850 nm; Diode A) (typ) tr, tf 0.018 s Rise and fall time (VR = 5 V, RL = 50 , = 850 nm; Diode B) (typ) tr, tf 0.025 s Forward voltage (IF = 100 mA, Ee = 0) (typ) VF 1 V Capacitance (VR = 0 V, f = 1MHz, E = 0; Diode A) (typ) C0 40 pF Capacitance (VR = 0 V, f = 1MHz, E = 0; Diode B) (typ) C0 100 pF Temperature coefficient of VO (typ) TCV -2.6 mV / K Temperature coefficient of ISC (typ) TCI 0.18 %/K Noise equivalent power (VR = 10 V; Diode A, = 870 nm) (typ) NEP 0.065 pW / Hz1/2 Noise equivalent power (VR = 10 V; Diode B, = 870 nm) (typ) NEP 0.091 pW / Hz1/2 Detection limit (VR = 10 V; Diode A, = 870 nm) (typ) D* 3.1e12 cm x Hz1/2 / W Detection limit (VR = 10 V; Diode B, = 870 nm) (typ) D* 3.5e12 cm x Hz1/2 / W 2016-04-11 3 Version 1.4 KOM 2125 Relative Spectral Sensitivity 1) page 10 Srel = f() Photocurrent / Open-Circuit Voltage 1) page 10 Power Consumption Ptot = f(TA) Dark Current 1) page 10 IR = f(VR), E = 0, normalized to 10 V / 25 C 2016-04-11 4 Version 1.4 KOM 2125 Capacitance 1) page 10 C = f(VR), f = 1 MHz, E = 0 Dark Current 1) page 10 IR = f(TA), VR = 10 V, E = 0, normalized to TA = 25C Package Outline 2 A 3 B 1 8.5 (0.335) Cathode 8.2 (0.323) 6.7 (0.264) 6.2 (0.244) Chip position 0...0.1 (0...0.004) 0.3 (0.012) 4.3 (0.169) 5.0 (0.197) 1.4 (0.055) 0.2 (0.008) 4.5 (0.177) Photosensitive area A = 2 (0.079) x 2 (0.079) B = 5 (0.197) x 2 (0.079) 0.9 (0.035) 0.7 (0.028) 5.2 (0.205) Active area 1.2 (0.047) 1.1 (0.043) GEOY6860 Dimensions in mm (inch). 2016-04-11 5 Version 1.4 KOM 2125 Approximate Weight: 86 mg Reflow Soldering Profile Product complies to MSL Level 4 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t Taping Dimensions in mm (inch). 2016-04-11 6 Version 1.4 KOM 2125 Tape and Reel 16 mm tape with 1400 pcs. on 180 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions [mm] Tape dim ensions in m m W P0 16 + 0.3 / - 0.1 4 0.1 P1 P2 D0 E F 12 0.1 or 8 0.1 2 0.1 1.5 0.1 1.75 0.1 7.5 0.1 Reel dimensions [mm] Reel dim ensions in m m A W Nmin W1 W2max 180 16 60 / 100 16.4 + 2 22.4 Barcode-Product-Label (BPL) OSRAM Opto EX A RoHS Compliant (6P) BATCH NO: 1234567890 (1T) LOT NO: 1234567890 BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors MP ML Temp ST X XXX C X (9D) D/C: 1234 Pack: RXX LE DEMY XXX X_X123_1234.1234 X (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 2016-04-11 7 Version 1.4 KOM 2125 Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see lab e If nk, bla cod bar y . H) (R . dit mi hu e ve ed ag ati RH % /60 C rar ck rel 30 N s VE RS inf pa % ainITI TO of to ak 90 d ntNSUC < ns (pe TIO or d , cte itio U g coSEND an bje ing C nd 5 C su ss CO Ais baRE co ce y 40 be TU MI CThIS C < tor ll pro SE _ < urs ). urs Ho de urs Ho co 72 Ho urs te 48 e Ho 24 6 da e tim e th tim or ). 23 tim e at t wi ntC or l wi fac Flo tim s at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be or de 24 tin en pro ve l 6 Le de , e te co , g: un wh Le ve l ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim se for ist ure ale op se for > , Mo se ure 3 is or . , is ha se Mo istist nk be nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi, va p. elf Ye ar ks _ < e icat me , C 1 Ye ee urs Sh terlow tem ted at ed uir > 1 W Ho un Af Indno uir DE 1. d e 4 8 ref dy reqy is 2. JE bo e Mo ore tim 16 req : C/ e es dit2b a) St tim or mi IP ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet. Here you will also find the normative references like JEDEC. Transportation Packing and Materials Barcode label Y M DE 18 R -1 Q + -1 P P: OU GR 01 C: 99 8 D/ 21 D) 00 (9 00 : 20 (Q 14 2 5 TY A 21 : 11 00 R ic S NO O 12 H em H S TC BA 3G P) : 12 (6 NO T LO T) (1 (X DE M R 18 -1 Q + -1 P RO UP : G (G ) u L lt S iT Y O T P 67 L 6 44 M D/ (9 D) 00 : 20 )Q TY C: 01 Y E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Muster : 34 : NO PR O ) (X Packing Sealing label Dimensions of transportation box in mm Width Length Height 195 5 195 5 42 5 2016-04-11 M RA OS D 5 14 2 110 0 (Q O 12 3G TC (6 P) NO : 12 LO (1 T) T BA 8 H S S em R ic AM o n O d u p ct to o H rs NO 2199 : NO PR OD ) < at 2100 34 on M du O p ct to or s 44 el ) L )Q E V LE see . lab e H) nk, cod (R bla r If ty ba . idi RH m hu 0% e /6 ive d C re ag lat ra ck re 30 _ < inf pa % k s of to 90 ea ur s d ). < ns (p or ur s d Ho de , cteg itio ur s Ho an bje co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da e 40 be oc ry tim C e r th ll pr tim cto ). r oo 23 wi nt tim e l wi fa r Fl oo tim s at at ale C at e. ica Fl th oo r th ur el nt Fl oo on es uiv if: read ed l 4 5 Fl , lab m ide eq low l oc ve vic is ingen be or de 24 l 5a6 pr ve Le de nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al d Le r en re tu re e re 10 ois tim se fo tu re ale op se fo > , M r se ois 3 is , is ha se M ois tu nk be oo . 03 nk g rd M ois in r-p bla in Fl RH g, DM ba po If blath % kin Ca life is (if . ar ST p. wi 10 baator et Jelf r th va Ye ar ks s m _ < m ed 1 Ye ee ur d, C iredic t Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e 4 8 ou re ed re ty is qu JE 2. bo e M or tim 16 re C/ : e es idi 2b r a) St tim mor is IP e ed r oo tim vic b) g e r Hu Fl en oo tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 2 Fl If al re tim ve l 4. se d l 2a3 ve Le g an ve l Le re Ba te Le ve tu re Le tu Da ois re tu re M ois M ois tu M ois M Nns IVEORS ai IT ntNS CT TIO DU U g EcoSE ON A ba IC UR M CThisSTSE OI M TO OP (G M u L lt S iT Y O T67 P L 6 Muster E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label 8 OHA02044 Version 1.4 KOM 2125 Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 2016-04-11 9 Version 1.4 KOM 2125 Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 2016-04-11 10 Version 1.4 KOM 2125 Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2016-04-11 11