1
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May 13, 2014
Issue No :DDF-0001824. Rev.2
www.everlight
americas.com
Display Through-hole
EADLBA10OA1
Features
• Industrial standard size.
• Low power consumption.
• Categorized for luminous intensity.
• Pb free and RoHS compliant.
Description
•The EADLBA10OA1 is a pattern display designed for viewing distances up to 7 meters.
• The display provides excellent reliability in bright ambient light.
• The device is made with white segments and gray surface.
Applications
• Home appliances
• Instrument panels
• Digital readout displays
DATASHEET
Display Through-hole
EADLBA10OA1
2
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May 13, 2014
Issue No : DDF-0001824. Rev.2
www.everlight
americas.com
Device Selection Guide
Chip Materials Emitted Color Resin Color
AlGaInP Reddish Orange
White Diffusion
Absolute
Maximum Ratings (Ta=25℃
℃℃
℃)
Parameter Symbol Rating Unit
Reverse Voltage V
R
5 V
Forward Current I
F
25 mA
Peak Forward Current
(Duty 1/10 @1KHz) I
FP
60 mA
Power Dissipation Pd
60 mW
Operating Temperature T
opr
-40 ~ +85
℃
Storage Temperature T
stg
-40 ~ +100
℃
Soldering Temperature
(Soldering time
≦
5 seconds) T
sol
260
℃
Electro
-Optical Characteristics (Ta=25℃
℃℃
℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity
*1
Iv 7.8 17.6 ----- mcd I
F
=10mA
Peak Wavelength λp ----- 621 ----- nm I
F
=20mA
Dominant Wavelength λd ----- 615 ----- nm I
F
=20mA
Spectrum Radiation Bandwidth ∆λ ----- 18 ----- nm I
F
=20mA
Forward Voltage V
F
----- 2.0 2.4 V I
F
=20mA
Reverse Current I
R
----- ----- 100 µA V
R
=5V
Note:
1. Tolerance of Luminous Intensity: ± 10
％
2. Tolerance of Forward Voltage: ± 0.1V
DATASHEET
Display Through-hole
EADLBA10OA1
3
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May 13, 2014
Issue No : DDF-0001824. Rev.2
www.everlight
americas.com
Typical Electro-Optical Characteristics Curves
Spectrum Distribution (Ta=25
℃
℃℃
℃
) Forward Current vs. Forward Voltage (Ta=25
℃
℃℃
℃
)
Relative luminous intensity (
％
)
Forward Current (mA)
Wavelength λp (nm) Forward Voltage (V)
Forward Current Derating Curve
Forward Current (mA)
Ambient Temperature (°C )
DATASHEET
Display Through-hole
EADLBA10OA1
4
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May 13, 2014
Issue No : DDF-0001824. Rev.2
www.everlight
americas.com
Package Dimension
& Internal Circuit Diagram
Note: Tolerances unless mentioned ±0.25mm. Unit = mm
DATASHEET
Display Through-hole
EADLBA10OA1
5
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May 13, 2014
Issue No : DDF-0001824. Rev.2
www.everlight
americas.com
Packing Materials
Label Explanation
‧
CPN: Customer’s Product Number
‧
P/N: Product Number
‧
QTY: Packing Quantity
‧
CAT: Luminous Intensity Rank
‧
HUE: Reference
‧
REF: Reference
‧
LOT No: Lot Number
‧
REFERENCE: Volume Label code
Packing Process
19 PCS/Tube 88 Tubes/Box 4 Boxes/Carton
DATASHEET
Display Through-hole
EADLBA10OA1
6
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May 13, 2014
Issue No : DDF-0001824. Rev.2
www.everlight
americas.com
Application Restrictions
1. Specification described in this document. Above specification may be changed without notice. EVERLIGHT
Americas
will reserve authority on material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in
these specification sheets. EVERLIGHT
Americas
assumes no responsibility for any damage resulting from use of
the product which does not comply with the absolute maximum ratings and the instructions included in these
specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
Americas
Corporation.
Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT
Americas
’ consent.
4. ESD (Electrostatic Discharge)
The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly
recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
ESD table/shelf mat made of conductive materials
Proper grounding is required for all devices, equipment, and machinery used in product assembly.
Surge protection should be considered when designing of commercial products.
If tools or equipment contain insulating materials such as glass or plastic,
the following measures against electrostatic discharge are strongly recommended:
Dissipating static charge with conductive materials
Preventing charge generation with moisture
Neutralizing the charge with ionizers
5.
The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not
subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, it may
cause migration resulting in LED damage.
