J-Link Microchip Adapter
The J-Link Microchip Adapter allows debug connections between J-Link and target
hardware which comes with Microchip PIC32 series MCUs. It supports the RJ12 modular
debug connector as specified by Microchip as well as the 14-pin dual row MIPS debug
header and the Microchip 6-pin single row PICkit connector (options, can be soldered by
customer on demand).
Note that the delivered modular cable will invert the pin order as shown in the pinout
below.
Pin Signal
1#MCLR
2VDD
3GND
4 DIO/PGD/RB7
5CLK/PGC/RB6
6NC
Schematic
Page 1 of 1SEGGE
R
- The Embedded Experts - Adapters
5
/
8
/
201
4
htt
p
://www.se
gg
er.com/
j
lin
k
-ada
p
ters.htm
l
