Mini Metal DC Geared Motor (6V 570RPM 1.5Kg*cm) SKU:FIT0564 INTRODUCTION This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is 570rpm and the noise is low. In order to protect the service life of the motor, do not overload it; Do not store and use it in high temperature or extreme humidity, which may affect the service life and effect of the motor; When soldering is required on the motor terminals of the positive and negative poles of the power supply, if the soldering iron temperature is between 340 C 40 C, the heating time should be within 3 seconds to prevent overheating deformation of the plastic parts in the motor; Do not let the motor shaft get stuck. If it is stuck, the motor will burn out; The motor should be used within the voltage specifications. SPECIFICATION Voltage: 6V Direction of rotation: twoway Reduction ratio: 1:35 Noload current: less than or equal to 170mA Noload speed: 570rpm Load torque: 400g.cm Load speed: 400rpm Load current: less than or equal to 900 Stall torque: 1.5kg.cm Stall current: 3.4A Shaft length: 10mm Shaft diameter: 3mm Dshaped shaft Weight: 25g Size: 12*13R15.5*38mm (without motor output shaft) SHIPPING LIST Mini Metal DC Geared Motor (6V 570RPM 1.5Kg*cm) x1 https://www.dfrobot.com/product1750.html 8718