THE INFORMATION CONTAINED HEREIN IS CONSIDERED "PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE RoHS COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. ELECTRICAL CHARACTERISTICS @ 25C TURNS RATIO SCHEMATIC TX 1cT : 1 RX icT : 4 PIN RJ45 OCL @ 100kHz/100mVRMS @mA DC BIAS 350uH MIN, INS, LOSS 1MHz TO 100MHz -1.0 dB MAX RET. LOSS (MIN) _ TCT 1 l1 1% 1MHz-30MHz 18 oB 30MHZz-60MHz -18+20LOGF /30MHz> dB TD+ 2 60MHz-80MHz le oB 1D- CROSS TALK <TX - RX 3 =e TX- 500kHz-1MHz -70 oB MIN 10 MHz -50 dB MIN 30 MHz -45 oB MIN RD+ 4 3]3 RX+ 50 MHz -40 oB MIN RD- 5 4 100 MHz -35 oB MIN 5 CM TO CM REJ 6 RX- 100kHz-1MHz -70 oB MIN RCT 6 7 10 MHz -47 oB MIN 3 30 MHz -42 oB MIN 60 MHz -37 dB MIN 4X 75 OHM 100 MHz -30 oB MIN CM TO DM REJ 100kHz-1MHz -70 oB MIN 1000pF 2kV 10 MHz -60 dB MIN 30 MHz -50 oB MIN om 60 MHz -45 oB MIN SHIELD 100 MHz -40 oB MIN HIPOT (Isolation Voltage: 1500 Vrms ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE CHUNG 11-25-05 SMD MagJack SBLL1XITA4F TOL. IN INCH lina; INcH [mml|eev.: 3 | FOeT DRAWN BY DATE <CM Termination? FILE NAME = SCALE: N/A |SIZE: A4 | comonmmsce, ~~ _ _ .. CONN zD DE 11-25-05 SSU-IXITA4-F S8111X1TA4-F B.DWG XXX 46)--==}++ |pack: 2 il Dc002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED *PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. -// \g \ 7A X |B HRA RECOMMENDED PCB FOOTPRINT COMPONENT SIDE VIEW 3, PINS: 4, METAL SHIELD: TIN-COATED COPPER WIRE, 0.024 [06] X 0.012 [0.3] THK, NICKEL PLATED COPPER ALLOY. MARK PART WITH MFG. LOGO, MFG. NAME, PART NUMBER, AND DATE CODE. RoHS COMPLIANT, PER EU DIRECTIVE 2002/95/EC. cWAKus UL RECOGNIZED - FILE #196366 AND F169987. 0.055+0.020 (1.40+0.511 o 0,705 [17.91] a} 0,950 [24,131 0.661 [16,79] tok MAX, 0.500 "| MAX gas + (12.701 ook SOM + = R45 iw et ; use 258 S65 ad 0.080 X 0.120 U I | U a502CTH of aoe [2.03 X 3.05] 112.75] 6 Sa eau 2 PLACES MAX, So { 7] Wo rt ipo Leos, ra Posey _ f ga _.| 0.080 f (eto 3 90.128 +0.003 Ca (3.25 +0,08) 0,330 [2,03] = ings et t=0.050 [127] ose 4 7 Op 2 PLACES 0.024 | [8.38] 0.050 in es (0.611 0.122+0.002 0100 [2.54] oon 0,045 X 0,080 ~ 3,10+0.05] 0.655 (e7] S 123456, [ld4 xX 203] _ 0.500 [16.64] AA BOG 6 PLACES NOTES: 1, PLASTIC HOUSING: THERMOPLASTIC PA 4/6 & THERMOSET PHENZLIC, 0.050 _.| | FLAMMABILITY RATING UL 94V-0 [1.27] 0.080 2, CONTACTS PLATING: 50 MICRU-INCH HARD GOLD PLATING (2.031 ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. |[ ] METRIC DIM. AS REFERENCE QIN\KEUNG 11-25-05 SMD MagJack S8111X1TA4-F TOL. IN INCH | unir : INCH [mm]|REV.: 8B bel DRAWN BY DATE eee tom FILE NAME = SCALE: N/A SIZE: A4 | comoummci. TING 11-25-05 S8111X1TA4-FB.DWG XX | +0010 @--= tT _[pace: a | mete DC002(2)032905 This document is electronically generated. This is a contr olled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED *PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. oO 2002/95/EC, SUGGESTED PANEL DPENING METAL PANEL ~| 0691 [17.55] 0.080 [2,03] SY Na] | 1 0.522 [13.26] c / PCB NOTES: THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRONT SURFACE OF PART IS ONLY A SUGGESTION. IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL OPENING DIMENSIONS CHANGE ACCORDINGLY. ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE QIN\KEUNG 11-25-05 SMD MagJock SB111X1TA4F TOL. IN INCH |unir . INCH [mmjleev.: 2 | FOeT DRAWN BY DATE CCM Termination? FILE NAME = SCALE: N/A SIZE : A4 | comronmnrscs _ _ . CONN, ED TING 11-25-05 SSI IXITA4F S81LX1TA4-FB.DWG mx [sone | = d[Paces | DC002(2)032305 This document is electronically generated. This is a controlled copy if used internally