Analog Sound Sensor SKU: DFR0034 Contents 1 Introduction 2 Specification 3 PinOut 4 Tutorial 4.1 Connection Diagram 4.2 Sample Code 4.3 Result 5 Trouble shooting Introduction This is an updated version of the Analog Sound Sensor. Analog Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal by imitating the input interface. You may use it to make some funny interactive works such as a voice operated switch. As one of our new version of breakout boards, we have improved the analog sound sensor in below: Wide voltage range from 3.3V to 5V Standard assembling structure (two 3mm holes with multiple of 5cm as interval) Easily recognitive interfaces of sensors ("A" for analog and "D" for digital) Icons to simplely illustrate sensor function High quality connector Immersion gold surface Specification Supply Voltage: 3.3V to 5V Detects the sound intensity Interface: Analog Size:22x30mm PinOut BlueAnalog signal output RedVCC BlackGND Tutorial Connection Diagram Sample Code void setup() { Serial.begin(9600); // open serial port, set the baud rate to 9600 bps } void loop() { int val; val=analogRead(0); //connect mic sensor to Analog 0 Serial.println(val,DEC);//print the sound value to serial delay(100); } Result Open the Serial monitor, Baud rate: 9600. Trouble shooting More question and cool idea, visit DFRobot Forum Powered By DFRobot (c) 2008-2017