© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1
One WORLD One Brand One Strategy One Focus One Team One KEMET
Benets
• ESR: 6mΩ to 90mΩ
• -55°C to 105°C operating temperature range
• Polymer cathode technology
• High frequency capacitance retention
• Non-ignition failure mode
• Capacitance: 15µF to 1,500µF
• Voltage: 2V to 25V
• 100% accelerated steady state aging
• 100% surge current tested
• Taped and reeled per EIA 481-D
• Volumetric efciency
• Self-healing mechanism
• EIA standard case sizes
Applications
Typical applications include DC/DC converters, notebook PCs,
portable electronics, telecommunications (mobile phone and base
station), displays, SSD, HDD and USB.
Overview
The KEMET Organic Capacitor (KO-CAP) is a tantalum capacitor
with a Ta anode and Ta2O5 dielectric. A conductive organic
polymer replaces the traditionally used MnO2 as the cathode
plate of the capacitor. This results in very low ESR and improved
capacitance retention at high frequency. The KO-CAP also
exhibits a benign failure mode which eliminates the ignition
failures that can occur in standard MnO2 tantalum types. KO-
CAPs may also be operated at steady state voltages up to 90%
of rated voltage for part types with rated voltages of ≤10 volts and
up to 80% of rated voltage for part types >10 volts with equivalent
or better reliability than traditional MnO2 tantalum capacitors
operated at 50% of rated voltage.
The T520 Series KO-CAP Low ESR Polymer captures the
best features of multilayer ceramic (low ESR, high frequency
capacitance retention), aluminum electrolytic (higher capacitance,
benign failure mode), and proven solid tantalum technology
(volumetric efciency, surface mount capability, extremely long
life). The T520 can reduce component counts, eliminate through-
hole assembly by replacing cumbersome leaded aluminum
capacitors, and offer a cost-effective and space-saving solution.
KEMET Organic Capacitor (KO-CAP)
T520 Series Polymer Tantalum
Environmental Compliance
RoHS Compliant (6/6)* according to Directive 2002/95/EC
*When ordered with 100% Sn Solder
SPICE
For a detailed analysis of specic part numbers, please visit kemet.com for a free download of KEMET’s SPICE software. The KEMET
SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,
temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 22
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Ordering Information
T520 V157 M006 A T E045
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
520 =
Polymer
A = 3216-18
B = 3528-21
C = 6032-28
D = 7343-31
H = 7260-20
L = 6032-19
M = 3528-15
T = 3528-12
U = 6032-15
V = 7343-19
W = 7343-15
X = 7343-43
Y = 7343-40
First two digits
represent
signicant
gures. Third
digit species
number of zeros.
M = ±20% 2R5 = 2.5V
003 = 3V
004 = 4V
006 = 6.3V
008 = 8V
010 = 10V
12R = 12.5V
016 = 16V
020 = 20V
025 = 25V
A = N/A T = 100%
Matte Tin (Sn)
Plated
H = Tin/Lead
(SnPb) Solder
Coated (5%
Pb minimum)
E = ESR
Last three digits
specify ESR
in mΩ. (045 =
45mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item Performance Characteristics
Operating Temperature -55°C to 105°C
Rated Capacitance Range 10µF–1,500µF @ 120 Hz/25°C
Capacitance Tolerance M Tolerance (20%)
Rated Voltage Range 2.5V–25V
DF (120Hz) ≤ 10%
ESR (100kHz) Refer to Part Number Electrical Specication Table
Leakage Current ≤ 0.1CV (μA) at Rated Voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 33
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Qualication
Test Condition Characteristics
Endurance 105°C @ Rated Voltage, 2,000 Hours
ΔC/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Storage Life 105°C @ 0 Volts, 2,000 Hours
ΔC/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within 2.0 x initial limit
Humidity 60°C, 90% RH, 500Hr, Rated Voltage
60°C, 90% RH, 500Hr, No Load
ΔC/C Within -5%/+35% of initial value
DF Within initial limits
DCL Within 5.0 x initial limit
ESR Within 2.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +105ºC, +25ºC
+25°C -55°C +85°C +105°C
ΔC/C I L* ±20% ±20% ±30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105° C, 1.32 x Rated Voltage, 1,000 cycles
ΔC/C Within -20%/+10% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MIL-STD-202, Meth. 213, Cond. I, 100G Peak
MIL-STD-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G
Peak
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 44
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Electrical Characteristics
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T520B157M006ATE035
T520C227M006ATE025
T520V337M006ATE015
T520D337M006ATE009
Capacitance vs. Frequency
ESR vs. Frequency
0.001
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance,ESR (Ohms)
Frequency (Hz)
T520B157M006ATE035_Imp
T520C227M006ATE025_Imp
T520V337M006ATE015_Imp
T520D337M006ATE009_Imp
T520B157M006ATE035_ESR
T520C227M006ATE025_ESR
T520V337M006ATE015_ESR
T520D337M006ATE009_ESR
Dimensions – Millimeters (Inches)
Metric will govern
Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low prole cases do not have a bevel or a notch.
* MIL-C-55365/8 specied dimensions
Case Size Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216-18
3.2 ± 0.2
(.126 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051)
B3528-21
3.5 ± 02
(138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.9 ± 0.2
(.075 ± .008)
2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
C6032-28
6.0 ± 0.3
(.236 ± .03)
3.2 ± 0.3
(.126 ± .012)
2.5 ± 0.3
(.098 ± .012)
2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094)
D7343-31
7.3 ± 0.3
(287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(.110 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
H7260-38
7.3 ± 0.3
(.287 ± .012)
6.0± 0.3
(.236 ± .012)
2.0 (.078) max 4.1 (.161) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 0.13 (.005) 3.5 (.138) 3.5 (.138)
L6032-19
6.0 ± 0.3
(236 ± .012)
3.2 ± 0.2
(.110 ± .008)
1.9 (.075) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094)
M3528-15
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.5 (.059) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
T3528-12
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.2 (.047) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
U6032-15
6.0 ± 0.3
(236 ± .012)
3.2 ± 0.2
(.110 ± .008)
1.5 (.059) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094)
V7343-19
7.3 ± 0.3
(287 ± .012)
4.3 ± 0.3
(.169 ± .012)
1.9 max 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
W7343-15
7.3 ± 0.3
(287 ± .012)
4.3 ± 0.3
(.169 ± .012)
1.5 (.059) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343-43
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.0 ± 0.3
(.157 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Y7343-40
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.0 (.157) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
15
Termination
cutout at
KEMET’s
option,
either end
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 55
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
2470 V/7343-19 T520V477M002A(1)E040 94 10 40 2200 3105
2.5 47 A/3216-18 T520A476M2R5A(1)E090 12 890 1100 3105
2.5 56 T/3528-12 T520T566M2R5A(1)E040 14 840 1600 3105
2.5 56 T/3528-12 T520T566M2R5A(1)E070 14 870 1200 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E070 17 870 1300 3105
2.5 68 A/3216-18 T520A686M2R5A(1)E080 17 880 1200 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E040 25 840 1600 3105
2.5 100 T/3528-12 T520T107M2R5A(1)E070 25 870 1200 3105
2.5 100 B/3528-20 T520B107M2R5A(1)E025 25 825 2300 3105
2.5 100 B/3528-20 T520B107M2R5A(1)E035 25 835 1900 3105
2.5 100 B/3528-20 T520B107M2R5A(1)E040 25 840 1800 3105
2.5 100 B/3528-20 T520B107M2R5A(1)E070 25 870 1300 3105
2.5 150 U/6032-15 T520U157M2R5A(1)E055 38 855 1600 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E015 55 815 2900 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E018 55 818 2700 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E021 55 821 2500 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E025 55 825 2300 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E030 55 830 2100 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E035 55 835 1900 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E055 55 855 1500 3105
2.5 220 B/3528-20 T520B227M2R5A(1)E070 55 870 1300 3105
2.5 220 U/6032-15 T520U227M2R5A(1)E055 55 855 1600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E025 55 825 2600 3105
2.5 220 C/6032-28 T520C227M2R5A(1)E045 55 845 1900 3105
2.5 220 W/7343-15 T520W227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E006 55 10 65600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E007 55 10 75200 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E009 55 10 94600 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E012 55 10 12 3900 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E015 55 10 15 3500 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E025 55 10 25 2700 3105
2.5 220 V/7343-19 T520V227M2R5A(1)E045 55 10 45 2000 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E007 55 10 75700 3105
2.5 220 D/7343-31 T520D227M2R5A(1)E040 55 10 40 2400 3105
2.5 330 B/3528-20 T520B337M2R5A(1)E015 83 815 2900 3105
2.5 330 B/3528-20 T520B337M2R5A(1)E018 83 818 2700 3105
2.5 330 B/3528-20 T520B337M2R5A(1)E035 83 835 1900 3105
2.5 330 B/3528-20 T520B337M2R5A(1)E045 83 845 1700 3105
2.5 330 B/3528-20 T520B337M2R5A(1)E070 83 870 1300 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E015 83 815 3300 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E018 83 818 3000 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E025 83 825 2600 3105
2.5 330 C/6032-28 T520C337M2R5A(1)E045 83 845 1900 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E009 83 8 9 4100 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E012 83 812 3500 3105
2.5 330 L/6032-19 T520L337M2R5A(1)E025 83 825 2400 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E015 83 10 15 3500 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E025 83 10 25 2700 3105
2.5 330 W/7343-15 T520W337M2R5A(1)E040 83 10 40 2100 3105
VDC
µF
KEMET/EIA (see below for
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 66
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
2.5 330 V/7343-19 T520V337M2R5A(1)E006 83 10 65600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E007 83 10 75200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E009 83 10 94600 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E012 83 10 12 3900 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E015 83 10 15 3500 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E018 83 10 18 3200 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E025 83 10 25 2700 3105
2.5 330 V/7343-19 T520V337M2R5A(1)E040 83 10 40 2200 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E006 83 10 66100 3105
2.5 330 D/7343-31 T520D337M2R5A(1)E007 83 10 75700 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E007 118 10 75200 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E009 118 10 94600 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E012 118 10 12 3900 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E015 118 10 15 3500 3105
2.5 470 V/7343-19 T520V477M2R5A(1)E018 118 10 18 3200 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E025 118 825 2600 3105
2.5 470 C/6032-28 T520C477M2R5A(1)E045 118 845 1900 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E006 118 10 66100 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E007 118 10 75700 3105
2.5 470 D/7343-31 T520D477M2R5A(1)E009 118 10 95000 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E010 170 10 10 4700 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E015 170 10 15 3900 3105
2.5 680 D/7343-31 T520D687M2R5A(1)E040 170 10 40 2400 3105
2.5 680 Y/7343-40 T520Y687M2R5A(1)E015 170 10 15 4000 3105
2.5 680 Y/7343-40 T520Y687M2R5A(1)E025 170 10 25 3100 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E015 250 10 15 3900 3105
2.5 1000 D/7343-31 T520D108M2R5A(1)E030 250 10 30 2700 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E010 250 10 10 4900 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E015 250 10 15 4000 3105
2.5 1000 Y/7343-40 T520Y108M2R5A(1)E025 250 10 25 3100 3105
2.5 1000 X/7343-43 T520X108M2R5A(1)E010 250 10 10 5000 3105
3100 B/3528-20 T520B107M003A(1)E025 30 825 2300 3105
3100 B/3528-20 T520B107M003A(1)E035 30 835 1900 3105
3100 B/3528-20 T520B107M003A(1)E040 30 840 1800 3105
3100 B/3528-20 T520B107M003A(1)E070 30 870 1300 3105
3150 B/3528-20 T520B157M003A(1)E025 45 825 2300 3105
3150 B/3528-20 T520B157M003A(1)E035 45 835 1900 3105
3150 B/3528-20 T520B157M003A(1)E040 45 840 1800 3105
3150 B/3528-20 T520B157M003A(1)E070 45 870 1300 3105
3330 V/7343-19 T520V337M003A(1)E009 99 10 94600 3105
3330 V/7343-19 T520V337M003A(1)E012 99 10 12 3900 3105
3330 V/7343-19 T520V337M003A(1)E015 99 10 15 3500 3105
3330 V/7343-19 T520V337M003A(1)E025 99 10 25 2700 3105
3680 D/7343-31 T520D687M003A(1)E015 204 10 15 3900 3105
3680 D/7343-31 T520D687M003A(1)E040 204 10 40 2400 3105
31000 X/7343-43 T520X108M003A(1)E015 300 10 15 4100 3105
31000 X/7343-43 T520X108M003A(1)E030 300 10 30 2900 3105
415 T/3528-12 T520T156M004A(1)E100 6 8 100 1000 3105
VDC
µF
KEMET/EIA
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20
º
C
+20
º
C 120Hz
+20
º
C 100kHz
+45
º
C 100kHz
Temp≤260
º
C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 77
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
433 A/3216-18 T520A336M004A(1)E070 13 870 1300 3105
433 A/3216-18 T520A336M004A(1)E080 13 880 1200 3105
447 A/3216-18 T520A476M004A(1)E070 19 870 1300 3105
447 A/3216-18 T520A476M004A(1)E080 19 880 1200 3105
447 T/3528-12 T520T476M004A(1)E070 19 870 1200 3105
468 T/3528-12 T520T686M004A(1)E070 27 870 1200 3105
468 B/3528-20 T520B686M004A(1)E025 27 825 2300 3105
468 B/3528-20 T520B686M004A(1)E035 27 835 1900 3105
468 B/3528-20 T520B686M004A(1)E040 27 840 1800 3105
468 B/3528-20 T520B686M004A(1)E070 27 870 1300 3105
468 U/6032-15 T520U686M004A(1)E055 27 855 1600 3105
4100 A/3216-18 T520A107M004A(1)E150 40 8150 900 3105
4100 A/3216-18 T520A107M004A(1)E200 40 8200 700 3105
4100 T/3528-12 T520T107M004A(1)E070 40 870 1200 3105
4100 T/3528-12 T520T107M004A(1)E150 40 8150 800 3105
4100 B/3528-20 T520B107M004A(1)E025 40 825 2300 3105
4100 B/3528-20 T520B107M004A(1)E035 40 835 1900 3105
4100 B/3528-20 T520B107M004A(1)E040 40 840 1800 3105
4100 B/3528-20 T520B107M004A(1)E070 40 870 1300 3105
4100 U/6032-15 T520U107M004A(1)E055 40 855 1600 3105
4150 B/3528-20 T520B157M004A(1)E015 60 815 2900 3105
4150 B/3528-20 T520B157M004A(1)E018 60 818 2700 3105
4150 B/3528-20 T520B157M004A(1)E025 60 825 2300 3105
4150 B/3528-20 T520B157M004A(1)E030 60 830 2100 3105
4150 B/3528-20 T520B157M004A(1)E035 60 835 1900 3105
4150 B/3528-20 T520B157M004A(1)E040 60 840 1800 3105
4150 B/3528-20 T520B157M004A(1)E070 60 870 1300 3105
4150 U/6032-15 T520U157M004A(1)E055 60 855 1600 3105
4150 C/6032-28 T520C157M004A(1)E015 60 815 3300 3105
4150 C/6032-28 T520C157M004A(1)E025 60 825 2600 3105
4150 C/6032-28 T520C157M004A(1)E045 60 845 1900 3105
4150 C/6032-28 T520C157M004A(1)E100 60 8100 1300 3105
4150 V/7343-19 T520V157M004A(1)E007 60 10 75200 3105
4150 V/7343-19 T520V157M004A(1)E009 60 10 94600 3105
4150 V/7343-19 T520V157M004A(1)E012 60 10 12 3900 3105
4150 V/7343-19 T520V157M004A(1)E015 60 10 15 3500 3105
4150 V/7343-19 T520V157M004A(1)E025 60 10 25 2700 3105
4150 D/7343-31 T520D157M004A(1)E007 60 10 75700 3105
4220 B/3528-20 T520B227M004A(1)E035 88 835 1900 3105
4220 B/3528-20 T520B227M004A(1)E045 88 845 1700 3105
4220 B/3528-20 T520B227M004A(1)E070 88 870 1300 3105
4220 C/6032-28 T520C227M004A(1)E015 88 815 3300 3105
4220 C/6032-28 T520C227M004A(1)E018 88 818 3000 3105
4220 C/6032-28 T520C227M004A(1)E025 88 825 2600 3105
4220 C/6032-28 T520C227M004A(1)E045 88 845 1900 3105
4220 C/6032-28 T520C227M004A(1)E055 88 855 1700 3105
4220 L/6032-19 T520L227M004A(1)E012 88 812 3500 3105
4220 L/6032-19 T520L227M004A(1)E025 88 825 2400 3105
4220 W/7343-15 T520W227M004A(1)E025 88 10 25 2700 3105
4220 W/7343-15 T520W227M004A(1)E040 88 10 40 2100 3105
VDC
µF
KEMET/EIA
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20
º
C
+20
º
C 120Hz
+20
º
C 100kHz
+45
º
C 100kHz
Temp≤260
º
C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 88
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
4220 V/7343-19 T520V227M004A(1)E006 88 10 65600 3105
4220 V/7343-19 T520V227M004A(1)E007 88 10 75200 3105
4220 V/7343-19 T520V227M004A(1)E009 88 10 94600 3105
4220 V/7343-19 T520V227M004A(1)E012 88 10 12 3900 3105
4220 V/7343-19 T520V227M004A(1)E015 88 10 15 3500 3105
4220 V/7343-19 T520V227M004A(1)E018 88 10 18 3200 3105
4220 V/7343-19 T520V227M004A(1)E025 88 10 25 2700 3105
4220 V/7343-19 T520V227M004A(1)E040 88 10 40 2200 3105
4220 V/7343-19 T520V227M004A(1)E045 88 10 45 2000 3105
4220 D/7343-31 T520D227M004A(1)E006 88 10 66100 3105
4220 D/7343-31 T520D227M004A(1)E007 88 10 75700 3105
4220 D/7343-31 T520D227M004A(1)E012 88 10 12 4300 3105
4220 D/7343-31 T520D227M004A(1)E065 88 10 65 1900 3105
4330 C/6032-28 T520C337M004A(1)E025 132 825 2600 3105
4330 C/6032-28 T520C337M004A(1)E045 132 845 1900 3105
4330 V/7343-19 T520V337M004A(1)E007 132 10 75200 3105
4330 V/7343-19 T520V337M004A(1)E009 132 10 94600 3105
4330 V/7343-19 T520V337M004A(1)E012 132 10 12 3900 3105
4330 V/7343-19 T520V337M004A(1)E018 132 10 18 3200 3105
4330 V/7343-19 T520V337M004A(1)E025 132 10 25 2700 3105
4330 V/7343-19 T520V337M004A(1)E040 132 10 40 2200 3105
4330 D/7343-31 T520D337M004A(1)E006 132 10 66100 3105
4330 D/7343-31 T520D337M004A(1)E007 132 10 75700 3105
4330 D/7343-31 T520D337M004A(1)E009 132 10 95000 3105
4330 D/7343-31 T520D337M004A(1)E012 132 10 12 4300 3105
4330 D/7343-31 T520D337M004A(1)E015 132 10 15 3900 3105
4330 D/7343-31 T520D337M004A(1)E040 132 10 40 2400 3105
4330 D/7343-31 T520D337M004A(1)E045 132 10 45 2200 3105
4470 D/7343-31 T520D477M004A(1)E010 188 10 10 4700 3105
4470 D/7343-31 T520D477M004A(1)E012 188 10 12 4300 3105
4470 D/7343-31 T520D477M004A(1)E015 188 10 15 3900 3105
4470 D/7343-31 T520D477M004A(1)E018 188 10 18 3500 3105
4470 D/7343-31 T520D477M004A(1)E025 188 10 25 3000 3105
4470 D/7343-31 T520D477M004A(1)E040 188 10 40 2400 3105
4680 D/7343-31 T520D687M004A(1)E012 272 10 12 4300 3105
4680 D/7343-31 T520D687M004A(1)E015 272 10 15 3900 3105
4680 D/7343-31 T520D687M004A(1)E025 272 10 25 3000 3105
4680 Y/7343-40 T520Y687M004A(1)E010 272 10 10 4900 3105
4680 Y/7343-40 T520Y687M004A(1)E015 272 10 15 4000 3105
4680 Y/7343-40 T520Y687M004A(1)E025 272 10 25 3100 3105
4680 X/7343-43 T520X687M004A(1)E010 272 10 10 5000 3105
4680 X/7343-43 T520X687M004A(1)E015 272 10 15 4100 3105
4680 X/7343-43 T520X687M004A(1)E035 272 10 35 2700 3105
6.3 15 T/3528-12 T520T156M006A(1)E100 9 8 100 1000 3105
6.3 22 A/3216-18 T520A226M006A(1)E090 14 890 1100 3105
6.3 22 A/3216-18 T520A226M006A(1)E100 14 8100 110 0 3105
6.3 33 A/3216-18 T520A336M006A(1)E070 21 870 1300 3105
6.3 33 A/3216-18 T520A336M006A(1)E080 21 880 1200 3105
6.3 33 A/3216-18 T520A336M006A(1)E120 21 8120 1000 3105
VDC
µF
KEMET/EIA
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20
º
C
+20
º
C 120Hz
+20
º
C 100kHz
+45
º
C 100kHz
Temp≤260
º
C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 99
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
6.3 33 T/3528-12 T520T336M006A(1)E070 21 870 1200 3105
6.3 33 B/3528-20 T520B336M006A(1)E025 21 825 2300 3105
6.3 33 B/3528-20 T520B336M006A(1)E035 21 835 1900 3105
6.3 33 B/3528-20 T520B336M006A(1)E040 21 840 1800 3105
6.3 33 B/3528-20 T520B336M006A(1)E070 21 870 1300 3105
6.3 33 C/6032-28 T520C336M006A(1)E100 21 8100 1300 3105
6.3 47 A/3216-18 T520A476M006A(1)E150 30 8150 900 3105
6.3 47 T/3528-12 T520T476M006A(1)E040 30 840 1600 3105
6.3 47 T/3528-12 T520T476M006A(1)E070 30 870 1200 3105
6.3 47 B/3528-20 T520B476M006A(1)E025 30 825 2300 3105
6.3 47 B/3528-20 T520B476M006A(1)E035 30 835 1900 3105
6.3 47 B/3528-20 T520B476M006A(1)E040 30 840 1800 3105
6.3 47 B/3528-20 T520B476M006A(1)E070 30 870 1300 3105
6.3 68 A/3216-18 T520A686M006A(1)E150 43 8150 900 3105
6.3 68 T/3528-12 T520T686M006A(1)E070 43 870 1200 3105
6.3 68 T/3528-12 T520T686M006A(1)E150 43 8150 800 3105
6.3 68 B/3528-20 T520B686M006A(1)E025 43 825 2300 3105
6.3 68 B/3528-20 T520B686M006A(1)E035 43 835 1900 3105
6.3 68 B/3528-20 T520B686M006A(1)E040 43 840 1800 3105
6.3 68 B/3528-20 T520B686M006A(1)E070 43 870 1300 3105
6.3 68 U/6032-15 T520U686M006A(1)E055 43 855 1600 3105
6.3 68 U/6032-15 T520U686M006A(1)E070 43 870 1400 3105
6.3 68 C/6032-28 T520C686M006A(1)E100 43 8100 1300 3105
6.3 100 T/3528-12 T520T107M006A(1)E070 63 870 1200 3105
6.3 100 B/3528-20 T520B107M006A(1)E015 63 815 2900 3105
6.3 100 B/3528-20 T520B107M006A(1)E018 63 818 2700 3105
6.3 100 B/3528-20 T520B107M006A(1)E025 63 825 2300 3105
6.3 100 B/3528-20 T520B107M006A(1)E035 63 835 1900 3105
6.3 100 B/3528-20 T520B107M006A(1)E040 63 840 1800 3105
6.3 100 B/3528-20 T520B107M006A(1)E045 63 845 1700 3105
6.3 100 B/3528-20 T520B107M006A(1)E070 63 870 1300 3105
6.3 100 U/6032-15 T520U107M006A(1)E055 63 855 1600 3105
6.3 100 W/7343-15 T520W107M006A(1)E040 63 10 40 2100 3105
6.3 100 V/7343-19 T520V107M006A(1)E009 63 10 94600 3105
6.3 100 V/7343-19 T520V107M006A(1)E012 63 10 12 3900 3105
6.3 100 V/7343-19 T520V107M006A(1)E015 63 10 15 3500 3105
6.3 100 V/7343-19 T520V107M006A(1)E045 63 10 45 2000 3105
6.3 100 C/6032-28 T520C107M006A(1)E025 63 825 2600 3105
6.3 100 C/6032-28 T520C107M006A(1)E045 63 845 1900 3105
6.3 120 B/3528-20 T520B127M006A(1)E035 76 835 1900 3105
6.3 150 M/3528-15 T520M157M006A(1)E070 95 870 1300 3105
6.3 150 M/3528-15 T520M157M006A(1)E150 95 8150 900 3105
6.3 150 B/3528-20 T520B157M006A(1)E025 95 825 2300 3105
6.3 150 B/3528-20 T520B157M006A(1)E035 95 835 1900 3105
6.3 150 B/3528-20 T520B157M006A(1)E045 95 845 1700 3105
6.3 150 B/3528-20 T520B157M006A(1)E070 95 870 1300 3105
6.3 150 M/3528-15 T520M157M006A(1)E070 95 870 1300 3105
6.3 150 M/3528-15 T520M157M006A(1)E150 95 8150 900 3105
6.3 150 M/3528-15 T520M157M006A(1)E200 95 8200 800 3105
6.3 150 C/6032-28 T520C157M006A(1)E015 95 815 3300 3105
VDC
µF
KEMET/EIA
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20
º
C
+20
º
C 120Hz
+20
º
C 100kHz
+45
º
C 100kHz
Temp≤260
º
C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1010
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
6.3 150 C/6032-28 T520C157M006A(1)E025 95 825 2600 3105
6.3 150 C/6032-28 T520C157M006A(1)E045 95 845 1900 3105
6.3 150 C/6032-28 T520C157M006A(1)E055 95 855 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E045 95 845 1700 3105
6.3 150 U/6032-15 T520U157M006A(1)E055 95 855 1600 3105
6.3 150 L/6032-19 T520L157M006A(1)E012 95 812 3500 3105
6.3 150 L/6032-19 T520L157M006A(1)E025 95 825 2400 3105
6.3 150 W/7343-15 T520W157M006A(1)E025 95 10 25 2700 3105
6.3 150 W/7343-15 T520W157M006A(1)E040 95 10 40 2100 3105
6.3 150 V/7343-19 T520V157M006A(1)E006 95 10 65600 3105
6.3 150 V/7343-19 T520V157M006A(1)E007 95 10 75200 3105
6.3 150 V/7343-19 T520V157M006A(1)E009 95 10 94600 3105
6.3 150 V/7343-19 T520V157M006A(1)E012 95 10 12 3900 3105
6.3 150 V/7343-19 T520V157M006A(1)E015 95 10 15 3500 3105
6.3 150 V/7343-19 T520V157M006A(1)E018 95 10 18 3200 3105
6.3 150 V/7343-19 T520V157M006A(1)E025 95 10 25 2700 3105
6.3 150 V/7343-19 T520V157M006A(1)E040 95 10 40 2200 3105
6.3 150 V/7343-19 T520V157M006A(1)E045 95 10 45 2000 3105
6.3 150 D/7343-31 T520D157M006A(1)E006 95 10 66100 3105
6.3 150 D/7343-31 T520D157M006A(1)E007 95 10 75700 3105
6.3 150 D/7343-31 T520D157M006A(1)E015 95 10 15 3900 3105
6.3 150 D/7343-31 T520D157M006A(1)E025 95 10 25 3000 3105
6.3 150 D/7343-31 T520D157M006A(1)E055 95 10 55 2000 3105
6.3 220 B/3528-20 T520B227M006A(1)E035 139 835 1900 3105
6.3 220 B/3528-20 T520B227M006A(1)E045 139 845 1700 3105
6.3 220 B/3528-20 T520B227M006A(1)E070 139 870 1300 3105
6.3 220 C/6032-28 T520C227M006A(1)E015 139 815 3300 3105
6.3 220 C/6032-28 T520C227M006A(1)E018 139 818 3000 3105
6.3 220 C/6032-28 T520C227M006A(1)E025 139 825 2600 3105
6.3 220 C/6032-28 T520C227M006A(1)E045 139 845 1900 3105
6.3 220 V/7343-19 T520V227M006A(1)E007 139 10 75200 3105
6.3 220 V/7343-19 T520V227M006A(1)E009 139 10 94600 3105
6.3 220 V/7343-19 T520V227M006A(1)E012 139 10 12 3900 3105
6.3 220 V/7343-19 T520V227M006A(1)E015 139 10 15 3500 3105
6.3 220 V/7343-19 T520V227M006A(1)E018 139 10 18 3200 3105
6.3 220 V/7343-19 T520V227M006A(1)E025 139 10 25 2700 3105
6.3 220 V/7343-19 T520V227M006A(1)E040 139 10 40 2200 3105
6.3 220 D/7343-31 T520D227M006A(1)E006 139 10 66100 3105
6.3 220 D/7343-31 T520D227M006A(1)E007 139 10 75700 3105
6.3 220 D/7343-31 T520D227M006A(1)E009 139 10 95000 3105
6.3 220 D/7343-31 T520D227M006A(1)E015 139 10 15 3900 3105
6.3 220 D/7343-31 T520D227M006A(1)E018 139 10 18 3500 3105
6.3 220 D/7343-31 T520D227M006A(1)E025 139 10 25 3000 3105
6.3 220 D/7343-31 T520D227M006A(1)E040 139 10 40 2400 3105
6.3 220 D/7343-31 T520D227M006A(1)E050 139 10 50 2100 3105
6.3 330 V/7343-19 T520V337M006A(1)E015 208 10 15 3500 3105
6.3 330 V/7343-19 T520V337M006A(1)E018 208 10 18 3200 3105
6.3 330 V/7343-19 T520V337M006A(1)E025 208 10 25 2700 3105
6.3 330 V/7343-19 T520V337M006A(1)E040 208 10 40 2200 3105
6.3 330 V/7343-19 T520V337M006A(1)E045 208 10 45 2000 3105
VDC
µF
KEMET/EIA
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20
º
C
+20
º
C 120Hz
+20
º
C 100kHz
+45
º
C 100kHz
Temp≤260
º
C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1111
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
6.3 330 D/7343-31 T520D337M006A(1)E009 208 10 95000 3105
6.3 330 D/7343-31 T520D337M006A(1)E010 208 10 10 4700 3105
6.3 330 D/7343-31 T520D337M006A(1)E015 208 10 15 3900 3105
6.3 330 D/7343-31 T520D337M006A(1)E018 208 10 18 3500 3105
6.3 330 D/7343-31 T520D337M006A(1)E025 208 10 25 3000 3105
6.3 330 D/7343-31 T520D337M006A(1)E040 208 10 40 2400 3105
6.3 330 D/7343-31 T520D337M006A(1)E045 208 10 45 2200 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E010 208 10 10 4900 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E015 208 10 15 4000 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E025 208 10 25 3100 3105
6.3 330 Y/7343-40 T520Y337M006A(1)E040 208 10 40 2500 3105
6.3 470 W/7343-15 T520W477M006A(1)E055 296 10 55 1800 385
6.3 470 V/7343-19 T520V477M006A(1)E055 296 10 55 1800 385
6.3 470 Y/7343-40 T520Y477M006A(1)E010 296 10 10 4900 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E015 296 10 15 4000 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E018 296 10 18 3700 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E025 296 10 25 3100 3105
6.3 470 Y/7343-40 T520Y477M006A(1)E035 296 10 35 2600 3105
6.3 470 D/7343-31 T520D477M006A(1)E015 296 10 15 3900 3105
6.3 470 D/7343-31 T520D477M006A(1)E025 296 10 25 3000 3105
6.3 470 D/7343-31 T520D477M006A(1)E030 296 10 30 2700 3105
6.3 470 X/7343-43 T520X477M006A(1)E010 296 10 10 5000 3105
6.3 470 X/7343-43 T520X477M006A(1)E018 296 10 18 3700 3105
6.3 470 X/7343-43 T520X477M006A(1)E035 296 10 35 2700 3105
6.3 470 X/7343-43 T520X477M006A(1)E040 296 10 40 2500 3105
6.3 1000 H/7260-20 T520H108M006A(1)E055 630 20 55 1800 485
6.3 1500 H/7260-20 T520H158M006A(1)E055 945 20 55 1800 485
833 T/3528-12 T520T336M008A(1)E070 26 870 1200 3105
833 T/3528-12 T520T336M008A(1)E080 26 880 1100 3105
833 B/3528-20 T520B336M008A(1)E025 26 825 2300 3105
833 B/3528-20 T520B336M008A(1)E035 26 835 1900 3105
833 B/3528-20 T520B336M008A(1)E040 26 840 1800 3105
833 B/3528-20 T520B336M008A(1)E070 26 870 1300 3105
833 U/6032-15 T520U336M008A(1)E070 26 870 1400 3105
847 B/3528-20 T520B476M008A(1)E035 38 835 1900 3105
847 B/3528-20 T520B476M008A(1)E070 38 870 1300 3105
882 C/6032-28 T520C826M008A(1)E025 66 825 2600 3105
882 C/6032-28 T520C826M008A(1)E045 66 845 1900 3105
8150 D/7343-31 T520D157M008A(1)E025 120 10 25 3000 3105
8150 D/7343-31 T520D157M008A(1)E040 120 10 40 2400 3105
8150 D/7343-31 T520D157M008A(1)E055 120 10 55 2000 3105
8150 V/7343-19 T520V157M008A(1)E040 120 10 40 2200 3105
10 10 A/3216-18 T520A106M010A(1)E080 10 880 1200 3105
10 15 A/3216-18 T520A156M010A(1)E080 15 880 1200 3105
10 22 A/3216-18 T520A226M010A(1)E080 22 880 1200 3105
10 33 T/3528-12 T520T336M010A(1)E040 33 840 1600 3105
10 33 T/3528-12 T520T336M010A(1)E070 33 870 1200 3105
10 33 T/3528-12 T520T336M010A(1)E080 33 880 1100 3105
VDC
µF
KEMET/EIA
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20
º
C
+20
º
C 120Hz
+20
º
C 100kHz
+45
º
C 100kHz
Temp≤260
º
C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1212
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
10 33 B/3528-20 T520B336M010A(1)E025 33 825 2300 3105
10 33 B/3528-20 T520B336M010A(1)E035 33 835 1900 3105
10 33 B/3528-20 T520B336M010A(1)E040 33 840 1800 3105
10 33 B/3528-20 T520B336M010A(1)E070 33 870 1300 3105
10 33 U/6032-15 T520U336M010A(1)E070 33 870 1400 3105
10 47 B/3528-20 T520B476M010A(1)E035 47 835 1900 3105
10 47 B/3528-20 T520B476M010A(1)E070 47 870 1300 3105
10 47 U/6032-15 T520U476M010A(1)E055 47 855 1600 3105
10 47 C/6032-28 T520C476M010A(1)E100 47 8100 1300 3105
10 68 U/6032-15 T520U686M010A(1)E055 68 855 1600 3105
10 68 W/7343-15 T520W686M010A(1)E025 68 10 25 2700 3105
10 68 W/7343-15 T520W686M010A(1)E040 68 10 40 2100 3105
10 68 C/6032-28 T520C686M010A(1)E045 68 845 1900 3105
10 68 V/7343-19 T520V686M010A(1)E025 68 10 25 2700 3105
10 68 V/7343-19 T520V686M010A(1)E040 68 10 40 2200 3105
10 68 V/7343-19 T520V686M010A(1)E045 68 10 45 2000 3105
10 68 V/7343-19 T520V686M010A(1)E060 68 10 60 1800 3105
10 68 V/7343-19 T520V686M010A(1)E100 68 10 100 1400 3105
10 68 D/7343-31 T520D686M010A(1)E100 68 10 100 1500 3105
10 100 C/6032-28 T520C107M010A(1)E025 100 825 2600 3105
10 100 C/6032-28 T520C107M010A(1)E045 100 845 1900 3105
10 100 L/6032-19 T520L107M010A(1)E025 100 825 2400 3105
10 100 W/7343-15 T520W107M010A(1)E040 100 10 40 2100 3105
10 100 V/7343-19 T520V107M010A(1)E018 100 10 18 3200 3105
10 100 V/7343-19 T520V107M010A(1)E025 100 10 25 2700 3105
10 100 V/7343-19 T520V107M010A(1)E045 100 10 45 2000 3105
10 100 V/7343-19 T520V107M010A(1)E050 100 10 50 1900 3105
10 100 D/7343-31 T520D107M010A(1)E018 100 10 18 3500 3105
10 100 D/7343-31 T520D107M010A(1)E055 100 10 55 2000 3105
10 100 D/7343-31 T520D107M010A(1)E080 100 10 80 1700 3105
10 150 C/6032-28 T520C157M010A(1)E055 150 855 1700 3105
10 150 V/7343-19 T520V157M010A(1)E018 150 10 18 3200 3105
10 150 V/7343-19 T520V157M010A(1)E025 150 10 25 2700 3105
10 150 V/7343-19 T520V157M010A(1)E040 150 10 40 2200 3105
10 150 D/7343-31 T520D157M010A(1)E015 150 10 15 3900 3105
10 150 D/7343-31 T520D157M010A(1)E018 150 10 18 3500 3105
10 150 D/7343-31 T520D157M010A(1)E025 150 10 25 3000 3105
10 150 D/7343-31 T520D157M010A(1)E040 150 10 40 2400 3105
10 150 D/7343-31 T520D157M010A(1)E055 150 10 55 2000 3105
10 150 Y/7343-40 T520Y157M010A(1)E015 150 10 15 4000 3105
10 150 Y/7343-40 T520Y157M010A(1)E018 150 10 18 3700 3105
10 150 Y/7343-40 T520Y157M010A(1)E025 150 10 25 3100 3105
10 220 V/7343-19 T520V227M010A(1)E045 220 10 45 2000 3105
10 220 V/7343-19 T520V227M010A(1)E025 220 10 25 2700 3105
10 220 D/7343-31 T520D227M010A(1)E018 220 10 18 3500 3105
10 220 D/7343-31 T520D227M010A(1)E025 220 10 25 3000 3105
10 220 D/7343-31 T520D227M010A(1)E040 220 10 40 2400 3105
10 220 Y/7343-40 T520Y227M010A(1)E040 220 10 40 2500 3105
10 330 Y/7343-40 T520Y337M010A(1)E010 330 10 10 4900 3105
10 330 Y/7343-40 T520Y337M010A(1)E015 330 10 15 4000 3105
VDC
µF
KEMET/EIA
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20
º
C
+20
º
C 120Hz
+20
º
C 100kHz
+45
º
C 100kHz
Temp≤260
º
C
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Table 1 – Ratings & Part Number Reference cont'd
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1313
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Table 1 – Ratings & Part Number Reference cont'd
Other part number options:
1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H).
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum
Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
VDC
120Hz
KEMET/EIA
part options)
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
(ºC)
µF
µAmps
% Max
mOhms
mAmps
J-STD-020D
10 330 Y/7343-40 T520Y337M010A(1)E035 330 10 35 2600 3105
10 330 X/7343-43 T520X337M010A(1)E010 330 10 10 5000 3105
10 330 X/7343-43 T520X337M010A(1)E025 330 10 25 3100 3105
10 330 X/7343-43 T520X337M010A(1)E040 330 10 40 2500 3105
12.5 10 T/3528-12 T520T106M12RA(1)E150 13 8150 800 3105
12.5 15 T/3528-12 T520T156M12RA(1)E080 19 880 1100 3105
16 10 B/3528-20 T520B106M016A(1)E100 16 8100 1100 3105
16 22 C/6032-28 T520C226M016A(1)E080 35 880 1400 3105
16 33 W/7343-15 T520W336M016A(1)E045 53 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E045 53 10 45 2000 3105
16 33 V/7343-19 T520V336M016A(1)E060 53 10 60 1800 3105
16 33 V/7343-19 T520V336M016A(1)E070 53 10 70 1600 3105
16 47 W/7343-15 T520W476M016A(1)E045 75 10 45 2000 3105
16 47 V/7343-19 T520V476M016A(1)E045 75 10 45 2000 3105
16 47 V/7343-19 T520V476M016A(1)E070 75 10 70 1600 3105
16 47 D/7343-31 T520D476M016A(1)E035 75 10 35 2500 3105
16 47 D/7343-31 T520D476M016A(1)E070 75 10 70 1800 3105
16 68 D/7343-31 T520D686M016A(1)E050 109 10 50 2100 3105
16 150 X/7343-43 T520X157M016A(1)E040 240 10 40 2500 3105
20 22 V/7343-19 T520V226M020A(1)E040 44 10 40 2200 3105
20 22 V/7343-19 T520V226M020A(1)E045 44 10 45 2000 3105
20 22 V/7343-19 T520V226M020A(1)E090 44 10 90 1400 3105
25 15 V/7343-19 T520V156M025A(1)E090 38 10 90 1400 3105
25 15 D/7343-31 T520D156M025A(1)E060 38 10 60 1900 3105
25 15 D/7343-31 T520D156M025A(1)E080 38 10 80 1700 3105
VDC
µF
KEMET/EIA (see below for
part options)
µAmps
% Max
mOhms
mAmps
J-STD-020D
(ºC)
120Hz
+20ºC
+20ºC 120Hz
+20ºC 100kHz
+45ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Rated
Temp
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1414
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Derating Guidelines
Voltage
Rating
Max Recommended
Steady State Voltage
Max Recommended
Transient Voltage (1ms–1µs)
-55°C to 105°C
2.5V ≤ Vr ≤ 10V 90% of VrVr
12.5V ≤ Vr ≤ 16V 80% of VrVr
Vr = Rated Voltage
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the
device. Permissible AC ripple voltage which may be applied is limited by two criteria:
1) The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.
2) The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specied for
reverse voltage. See the Reverse Voltage section for allowable limits.
The maximum power dissipation by case size can be determined using the below left table. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental operating temperatures. Please refer to the below right table for
temperature compensation requirements.
Case Code
Maximum Power Dissipation (P max)
mWatts @ 45°C w/ +30°C Rise
KEMET EIA
T520T/T525T/
T540T
3528-12 105
T520M
3528-15
120
T520A 3216-18 112
T520B/T525B/
T540B
3538-21 127
T520U
6032-15
135
T520L 3528-19 150
T520C
6032-28
165
T520W
7343-15
180
T520V/T521V/
T522V
7343-20 187
T520D/T521D/
T525D/T540D
7343-31 225
T520Y/T522Y/
T525Y
7343-40 241
T520X/T521X 7343-43 247
T520H
7260-20
187
T528I 3216-10 95
T528K
3528-10
150
T528W 7343-15 325
T528Z 7343-17 325
T530/T541D
7343-31
255
T530/T541Y 7343-40 263
T530/T541X
7443-43
270
Temperature Compensation Multipliers
for Maximum Power Dissipation (P max)
≤45°C 45°C < T ≤ 85°C 85°C < T ≤ 125°C
1.00 0.70 0.25
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
Pmax = maximum power dissipation (watts)
R = ESR at specied frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1515
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Reverse Voltage
Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity.
These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table.
*For series rated to 125°C
Table 2 – Land Dimensions/Courtyard
KEMET Metric
Size
Code
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
Case EIA X Y CV1 V2 X Y CV1 V2 X Y CV1 V2
A3216–18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00
B3258–19 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20
C6032–25 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.8 0 3.90 2.15 1.85 2.40 6.90 3.60
D7343–31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
H7260-20 4.25 2.65 3.20 10.10 7. 20 4.15 2.25 3.30 9.40 6.70 4.05 1.85 3.00 8.10 6.40
E¹ 7260–38 4.25 2.65 3.20 10.10 7.20 4.15 2.25 3.30 9.40 6.70 4.05 1.85 3.00 8.10 6.40
R2012–12 1.05 1.80 1.00 4.80 2.40 0.95 1.45 0.90 3.80 1.90 0.85 1.05 0.80 2.90 1.60
S² 3216–12 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00
T3258–12 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20
U6032–15 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60
V7343–20 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
X¹ 7343–43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
Y¹ 7343–35 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualication
testing based on the conditions outlined in IPC standard 7351 (IPC-7351).
¹ Height of these chips may create problems in wave soldering.
² Land pattern geometry is too small for silkscreen outline.
Temperature Permissible Transient Reverse Voltage
25°C 15% of Rated Voltage
55°C 10% of Rated Voltage
85°C 5% of Rated Voltage
105°C 3% of Rated Voltage
125°C* 1% of Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1616
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Polymer /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint
Washer
Tantalum Wire
Weld
Leadframe
(-Cathode)
Leadframe
(+Anode)
Time
Temperature
T
smin
25° C to Peak
t
L
t
S
25
t
P
T
smax
T
L
T
P
Max Ramp Up Rate = 3° C/sec
Max Ramp Down Rate = 6° C/sec
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR or vapor phase reow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended
prole conditions for convection and IR reow reect the prole
conditions of the IPC/J-STD-020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three reow passes at these conditions.
Note that although the X/7343-43 case size can withstand wave
soldering, the tall prole (4.3 mm maximum) dictates care in wave
process development.
Hand soldering should be performed with care due to the difculty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reow occurs. Once reow occurs, the
iron should be removed immediately. "Wiping" the edges of a chip
and heating the top surface is not recommended.
During typical reow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and is not harmful to the product. Marking permanency is not
affected by this change.
Prole Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Min (TSmin)100°C 150°C
Temperature Max (TSmax)150°C 200°C
Time (ts) from Tsmin to Tsmax) 60–120 sec 60–120 sec
Ramp-up Rate (TL to TP) 3°C/sec max 3°C/sec max
Liquidous Temperature (TL)183°C 217°C
Time Above Liquidous (tL) 60–150 sec 60–150 sec
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Max Peak
Temperature (t
P
)20 sec max 30 sec max
Ramp-down Rate (TP to TL) 6°C/sec max 6°C/sec max
Time 25°C to Peak Temperature 6 minutes max 8 minutes max
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
*Case Size D, E, P, Y and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z
Construction
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1717
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Capacitor Marking
PWC*
Year Month
V = 2008 1 = Jan 7 = Jul
W = 2008 2 = Feb 8 = Aug
X = 2009 3 = Mar 9 = Spt
A = 2010 4 = Apr O = Oct
B = 2011 5 = May N = Nov
C = 2012 6 = Jun D = Dec
Storage
All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classied
as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working
environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH.
(KO)
KEMET
Organic
Polymer
Rated
Voltage
476
16V
KO Polarity
Indicator (+)
Picofarad Code
KEMET ID
PWC*
K
A6 49 Inter nal Code
(KO)
KEMET
Organic
Polymer
Rated
Voltage
476
16 K
030
KO Polarity
Indicator (+)
Picofarad Code
KEMET ID
PWC*
* 030 = 30th week of 2010
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1818
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Tape & Reel Packaging Information
KEMET’s Molded Tantalum and Aluminum Chip Capacitor families
are packaged in 8 mm and 12 mm plastic tape on 7" and 13"
reels, in accordance with EIA Standard 481-D: Taping of Surface
Mount Components for Automatic Handling. This packaging
system is compatible with all tape fed automatic pick and place
systems.
Table 3 – Packaging Quantity
Case Code Tape
Width-mm 7" Reel* 13" Reel*
KEMET EIA
R
2012-12
8
2,500
10,000
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E
7260-38
12
500
2,000
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 1919
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Min.
Note 1 E1P0 P2
R Ref.
Note 2
S
1
Min.
Note 3 T Max. T1 Max.
8 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.0
(0.039)
1.75 ± 0.10
(0.069 ± 0.004)
4.0 ± 0.10
(0.157 ± 0.004)
2.0 ± 0.05
(0.079 ± 0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Max.
Note 4
E2 Min. F P1 T2 Max W Max A0,B0 & K0
8 mm Single (4 mm) 4.35
(0.171)
6.25
(0.246)
3.5 ± 0.05
(0.138 ± 0.002)
4.0 ± 0.10
(0.157 ± 0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ± 0.05
(0.217 ± 0.002)
8.0 ± 0.10
(0.315 ± 0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ± 0.05
(0.217 ± 0.002)
8.0 ± 0.10
(0.315 ± 0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12mm tapes and 10° maximum for 16mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4).
(e) see Addendum in EIA Document 481 for standards relating to more precise taping requirements.
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o
.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 5
[10 pitches cumulative
tolerance on tape ±0.2 mm]
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 2020
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16-200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16-56 10
72-200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8mm & 12mm Tape
1.0 mm maximum
1.0 mm maximum
16mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier Punched
Carrier
Tape Width Peel Strength
8 mm 0.1 Newton to 1.0 Newton (10gf to 100gf)
12 mm & 16 mm 0.1 Newton to 1.3 Newton (10gf to 130gf)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 2121
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Figure 5 – Reel Dimensions
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Min C D Min
8 mm
178 ± 0.20
(7.008 ± 0.008)
or
330 ± 0.20
(13.000 ± 0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Min W1 W2 Max W3
8 mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16 mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm min.)
If present,
tape slot in core
for tape start:
2.5 mm min. width x
10.0 mm min. depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 2222
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm minimum,
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm Min.
Leader
400 mm Minimum,
Figure 7 – Maximum Camber
Carrier Tape Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 2323
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Novi, MI
Tel: 248-994-1030
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39 - 051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 2424
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Other KEMET Resources
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering
Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 11/29/2011 2525
KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy
Brand, email=marcybrand@kemet.com
Date: 2012.02.14 15:17:36 -05'00'