1
ISO-9001
Registered
PRECISION METAL FILM RESISTORS
GP SERIES
• •
• •
• Meets requirements of MIL-R-10509
• •
• •
• 10 ohm - 10 megohm resistance range
• •
• •
• Flame-retardant coatings are standard
• •
• •
• Temperature coefficients from ±25 to ±100ppm/°C
• •
• •
• Resistance range tolerance of ±0.1% - 1%
PERFORMANCE CHARACTERISTICS (TESTED PER MIL-STD-202):
WIREWOUND AND FILM TECHNOLOGIES DIVISION
736 Greenway Road • Boone, Nor th Carolina 28607-1860 • Tel: 828-264-8861 • Fax: 828-264-8866 • www.irctt.com
EPYTCRI
GNITARREWOPCRI )sttaw( LIM ECNEREFER
MUMIXAM GNIKROW EGATLOV
ECNATSISER ERUTAREPMET TNEICIFFEOC )C°/mpp±(
EGNARECNATSISER&ECNARELOT
C°07@C°521@%1+%5.±%1.0±dna52.±
)0T(05-PG8/101/105NR002001geM73.2-01mhoK994-mho01mhoK001-mho001
)2T(05-PG8/101/105NR00205geM1-mho01mhoK994-mho01mhoK001-mho001
)9T(05-PG8/101/105NR00252mhoK994-mho9.94mhoK994-mho9.94mhoK001-mho001
)0T(55-PG4/18/155NR052001geM01-mho01mhoK994-mho01mhoK003-mho03
)2T(55-PG4/18/155NR05205geM99.4-mho01mhoK994-mho01mhoK003-mho03
)9T(55-PG4/18/155NR05252mhoK994-mho03mhoK994-mho03mhoK003-mho03
)0T(06-PG2/14/106NR053001geM01-mho01mhoK994-mho01mhoK001-mho001
)2T(06-PG2/14/106NR05305geM99.4-mho01mhoK994-mho01mhoK001-mho001
)9T(06-PG2/14/106NR05352mhoK994-mho9.94mhoK994-mho9.94mhoK001-mho001
ENVIRONMENTAL (%∆∆
∆∆
∆R)
Moisture Resistance
Thermal Shock
Load Life @ 70°C - 1000 hours
Shock and Vibration
Resistance to Soldering Heat
Terminal Strength
Dielectric Withstand V oltage
Short Time Overload
Operating T emperature Range
Maximum Pulse Voltage
Insulation Resistance
Voltage Coefficient
MIL-R-10509
Typical
±0.5
±0.25
±0.5
±0.25
±0.1
±0.2
±0.25
±0.25
-55°C to +165°C
GP50 400V, GP55
500V, GP60 600V
10,000 meg min.
10ppm/V
Char. D
±1.5
±0.5
±1.0
±0.5
±0.5
±0.2
±0.5
±0.5
-55°C to +165°C
Char. C
±0.5
±0.25
±0.5
±0.25
±0.1
±0.2
±0.25
±0.25
-55°C to +165°C
EIA RS-196
Class 1
±1.5
-
±2.0
-
-
-
±0.5
±0.5
2
ISO-9001
Registered
GP DIMENSIONS (Inches and (mm)):
AB A
C
D
Dimension
A
B
C
D
GP50
1.10±.08 (28.0±2.0)
0.13 + .01/-.00 (3.2+0.2/-0.0)
0.018±.001 (0.45±0.02)
0.073±.006(1.85±0.15)
GP55
1.10±.08 (28.0±2.0)
0.24±.01 (6.0±0.3)
0.023±.002 (0.60±0.05)
0.09±.01(2.4±0.2)
GP60
1.10±.08 (28.0±2.0)
0.33±.02 (8.5±0.5)
0.027±.002 (0.70±0.05)
0.11±.01(2.8±0.3)
GP PERFORMANCE CURVES:
Derating Curve (T ypical)
0 20 40 60 80 100 120 140 160 180
0
20
40
60
80
100
High-Frequency Characteristics (T ypical)
0.1 1 10 100
0
0.2
0.4
0.6
0.8
1.0
Current Noise (T ypical)
10 100 1K 10K 100K
0.003
0.01
0.03
0.1
0.3
1.0
-50
-40
-30
-20
-10
0
RN 1/4
RN 1/2
Percent Rated Load
Ambient Temperature (°C)
Ratio Rf/RDC
Frequency (MHz)
Ratio Rf/RDC
Nominal Resistance (ohms)
GP CONSTRUCTION:
(db)
100Ω
1KΩ
10KΩ
100KΩ
GP-55
WIREWOUND AND FILM TECHNOLOGIES DIVISION
736 Greenway Road • Boone, Nor th Carolina 28607-1860 • Tel: 828-264-8861 • Fax: 828-264-8866 • www.irctt.com
HOW TO ORDER:
Sample Part No.:
GP 55 100 1001 F
IRC T ype
Size
TCR
Resistance V alue
3 digit range and 1 digit multiplier
Tolerance
F = 1%, D = .5%, C = .25%, B = .1% Packaging: Bulk or
Tape and Reel
6. TERMINATIONS.
Positive contact is provided to the resistance element by precision-made end
caps. The lead wires are attached by using proprietary welding techniques.
5. INSULATION.
The resistors are coated with multiple layers of a baked-on fire-retardant
synthetic resin which provides the units with a high degree of mechanical and
electrical protection in the most adverse operating conditions.
4. SUBSTRATES.
The substrates are of a proprietary non alkaline ceramic, prepared and
processed under exacting conditions to guarantee the utmost in uniformity
and surface characteristics.
3. FILM.
Carbon-film resistors have a homogeneous film of pure carbon deposited b y a
pyrolitic process at carefully controlled temperatures.
2. HELIXING.
The units are helixed to a predetermined base to final v alue r atio to obtain the
best TCR, noise and stability character istics.
1. COLOR BANDS.
The resistors are permanently color banded for resistance v alue and tolerance
in accordance with EIA specifications.
GP-60
