NJM78L00 3-TERMINAL POSITIVE VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM78L00 series of 3-Terminal Positive Voltage Regulators is constructed using the New JRC Planar epitaxial process. These regulators employ internal current-limiting and thermal-shutdown, making them essentially indestructible. If adequate heat sinking is provided, they can deliver up to 100mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The NJM78L00 series used as a Zener diode/resistor combination replacement, offers an effective output impedance improvement of typically two orders of magnitude, along with lower quiescent current and lower noise. FEATURES Internal Short Circuit Current Limit Internal Thermal Overload Protection Excellent Ripple Rejection Guarantee'd 100mA Output Current Package Outline Bipolar Technology PACKAGE OUTLINE (SOT-89) (EMP8) NJM78L00UA NJM78L00EA (5V, 9V, 12V Version Only) SOT-89, EMP8 PIN CONFIGURATION PIN CONFIGURATION PIN CONFIGURATION 1. OUT 2. GND 3. IN 1. OUT 2. GND 3. GND 4. NC 5. NC 6. GND 7. GND 8. IN 5 NJM78L00UA NJM78L00EA EQUIVALENT CIRCUIT Ver.2009-12-25 -1- NJM78L00 ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Input Voltage VIN Power Dissipation PD Operating Temperature Range Storage Temperature Range (Ta=25C) MAXIMUM RATINGS (78L02A to 78L09A) (78L12A to 78L15A) (78L18A to 78L24A) 30 35 40 UNIT V (EMP8) 350 (SOT-89) 300 mW Topr -40 to +85 C Tstg -40 to +150 C ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing. PARAMETER NJM78L02UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L03UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L05UA/EA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage -2- SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION VIN=9V, IO=40mA VIN=4.75V to 20V, IO=40mA VIN=5V to 20V, IO=40mA VIN=9V, IO=1 to 40mA VIN=9V, IO=1 to 100mA VIN=9V, IO=0mA VIN=9V, IO=1mA 6V< VIN <16V, IO=40mA, ein=1VP-P, f=120Hz VIN=9V, BW=10Hz to 100kHz, IO=40mA VIN=9V, IO=40mA VIN=5V to 20V, IO=40mA VIN=6V to 20V, IO=40mA VIN=9V, IO=1 to 40mA VIN=9V, IO=1 to 100mA VIN=9V, IO=0mA VIN=9V, IO=1mA 6V< VIN <16V, IO=40mA, ein=1VP-P, f=120Hz VIN=9V, BW=10Hz to 100kHz, IO=40mA VIN=10V, IO=40mA VIN=7V to 20V, IO=40mA VIN=8V to 20V, IO=40mA VIN=10V, IO=1 to 40mA VIN=10V, IO=1 to 100mA VIN=10V, IO=0mA VIN=10V, IO=1mA 8V< VIN <18V, IO=40mA, ein=1VP-P, f=120Hz VIN=10V, BW=10Hz to 100kHz, IO=40mA MIN. TYP. MAX. UNIT 2.47 - 2.6 2.0 0.2 2.73 125 100 25 50 6 - V mV mV mV mV mA mV/C 43 - 73 35 - dB V 2.85 - 3.0 2.0 0.2 3.15 125 100 25 50 6 - V mV mV mV mV mA mV/C 43 - 72 40 - dB V 4.75 - 5.0 2.0 0.4 5.25 200 150 30 60 6 - V mV mV mV mV mA mV/C 40 - 69 70 - dB V Ver.2009-12-25 NJM78L00 ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing. PARAMETER NJM78L06UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L07UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L08UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage Ver.2009-12-25 SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION MIN. TYP. MAX. UNIT VIN=12V, IO=40mA VIN=8.5V to 20V, IO=40mA VIN=9V to 20V, IO=40mA VIN=12V, IO=1 to 40mA VIN=12V, IO=1 to 100mA VIN=12V, IO=0mA VIN=12V, IO=1mA 5.7 - 6.0 2.0 0.5 6.3 200 150 40 80 6 - V mV mV mV mV mA mV/C 9V< VIN <20V, IO=40mA, ein=1VP-P, f=120Hz VIN=12V, BW=10Hz to 100kHz, IO=40mA 40 - 67 80 - dB V 6.65 - 7.0 2.1 0.55 7.35 210 160 45 90 6 - V mV mV mV mV mA mV/C 10V< VIN <20V, IO=40mA, ein=1VP-P, f=120Hz VIN=13V, BW=10Hz to 100kHz, IO=40mA 39 - 66 100 - dB V VIN=14V, IO=40mA VIN=10.5V to 23V, IO=40mA VIN=11V to 23V, IO=40mA VIN=14V, IO=1 to 40mA VIN=14V, IO=1 to 100mA VIN=14V, IO=0mA VIN=14V, IO=1mA 7.6 - 8.0 2.1 0.6 8.4 225 175 50 100 6 - V mV mV mV mV mA mV/C 11V< VIN <20V, IO=40mA, ein=1VP-P, f=120Hz VIN=14V, BW=10Hz to 100kHz, IO=40mA 39 - 66 115 - dB V VIN=13V, IO=40mA VIN=9.5V to 22V, IO=40mA VIN=10V to 22V, IO=40mA VIN=13V, IO=1 to 40mA VIN=13V, IO=1 to 100mA VIN=13V, IO=0mA VIN=13V, IO=1mA -3- NJM78L00 ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing. PARAMETER NJM78L09UA/EA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L10UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L12UA/EA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L15UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage -4- SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION MIN. TYP. MAX. UNIT 8.55 - 9.0 2.1 0.65 9.45 250 200 50 100 6 - V mV mV mV mV mA mV/C 12V< VIN <21V, IO=40mA, ein=1VP-P, f=120Hz VIN=15V, BW=10Hz to 100kHz, IO=40mA 38 - 65 125 - dB V VIN=16V, IO=40mA VIN=13V to 25V, IO=40mA VIN=14V to 25V, IO=40mA VIN=16V, IO=1 to 40mA VIN=16V, IO=1 to 100mA VIN=16V, IO=0mA VIN=16V, IO=1mA 9.5 - 10.0 2.1 0.7 10.5 250 200 50 100 6 - V mV mV mV mV mA mV/C 13V< VIN <22V, IO=40mA, ein=1VP-P, f=120Hz VIN=16V, BW=10Hz to 100kHz, IO=40mA 37 - 64 135 - dB V 11.4 - 12.0 2.1 0.9 12.6 250 200 50 100 6.5 - V mV mV mV mV mA mV/C 37 - 62 160 - dB V 14.3 - 15.0 2.2 1.0 15.7 300 250 75 150 6.5 - V mV mV mV mV mA mV/C 34 - 60 190 - dB V VIN=15V, IO=40mA VIN=11.5V to 23V, IO=40mA VIN=12V to 23V, IO=40mA VIN=15V, IO=1 to 40mA VIN=15V, IO=1 to 100mA VIN=15V, IO=0mA VIN=15V, IO=1mA VIN=19V, IO=40mA VIN=14.5V to 27V, IO=40mA VIN=16V to 27V, IO=40mA VIN=19V, IO=1 to 40mA VIN=19V, IO=1 to 100mA VIN=19V, IO=0mA VIN=19V, IO=1mA 15V< VIN <25V, IO=40mA, ein=1VP-P, f=120Hz VIN=19V, BW=10Hz to 100kHz, IO=40mA VIN=23V, IO=40mA VIN=17.5V to 30V, IO=40mA VIN=20V to 30V, IO=40mA VIN=23V, IO=1 to 40mA VIN=23V, IO=1 to 100mA VIN=23V, IO=0mA VIN=23V, IO=1mA 18.5V< VIN <28.5V, IO=40mA, ein=1VP-P, f=120Hz VIN=23V, BW=10Hz to 100kHz, IO=40mA Ver.2009-12-25 NJM78L00 ELECTRICAL CHARACTERISTICS(CIN=0.33F, CO=0.1F, Tj=25C) Measurement is to be conducted is pulse testing. PARAMETER NJM78L18UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L20UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage NJM78L24UA Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Coefficient of Output Voltage Ripple Rejection Output Noise Voltage SYMBOL VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO VO VO-VIN1 VO-VIN2 VO-IO1 VO-IO2 IQ VO/T RR VNO TEST CONDITION VIN=27V, IO=40mA VIN=22V to 33V, IO=40mA VIN=22V to 33V, IO=40mA VIN=27V, IO=1 to 40mA VIN=27V, IO=1 to 100mA VIN=27V, IO=0mA VIN=27V, IO=1mA 23V< VIN <33V, IO=40mA, ein=1VP-P, f=120Hz VIN=27V, BW=10Hz to 100kHz, IO=40mA VIN=29V, IO=40mA VIN=23V to 34V, IO=40mA VIN=24V to 34V, IO=40mA VIN=29V, IO=1 to 40mA VIN=29V, IO=1 to 100mA VIN=29V, IO=0mA VIN=29V, IO=1mA 24V< VIN <34V, IO=40mA, ein=1VP-P, f=120Hz VIN=29V, BW=10Hz to 100kHz, IO=40mA VIN=33V, IO=40mA VIN=27V to 38V, IO=40mA VIN=28V to 38V, IO=40mA VIN=33V, IO=1 to 40mA VIN=33V, IO=1 to 100mA VIN=33V, IO=0mA VIN=33V, IO=1mA 27.5V< VIN <37.5V, IO=40mA, ein=1VP-P, f=120Hz VIN=33V, BW=10Hz to 100kHz, IO=40mA MIN. TYP. MAX. UNIT 17.1 - 18.0 2.2 1.1 18.9 320 270 80 160 6.5 - V mV mV mV mV mA mV/C 33 - 59 230 - dB V 19.0 - 20.0 2.3 1.2 21.0 330 280 90 180 7 - V mV mV mV mV mA mV/C 32 - 58 250 - dB V 22.8 - 24 2.3 1.4 25.2 350 300 100 200 7 - V mV mV mV mV mA mV/C 32 - 57 280 - dB V SOT-89 MARK (1) (2) (3) (4) Ver.2009-12-25 8 : Positive Output VO Rank The end of A.D. Production Mouth Oct. ***X Nov. ***Y Dec. ***Z NJM78L02UA NJM78L03UA NJM78L05UA NJM78L06UA NJM78L07UA NJM78L08UA NJM78L09UA NJM78L10UA NJM78L12UA NJM78L15UA NJM78L18UA NJM78L20UA NJM78L24UA 8 8 8 8 8 8 8 8 8 8 8 8 8 A B C E F G H J K L M N P -5- NJM78L00 TEST CIRCUIT 1. Output Voltage, Line Regulation, Load Regulation, Quiescent Current, Average Temperature Coefficient of Output Voltage, Output Noise Voltage, Peak Output/Short-Circuit Current 2. Ripple Rejection POWER DISSIPATION VS. AMBIENT TEMPERATURE -6- Ver.2009-12-25 NJM78L00 TYPICAL CHARACTERISTICS NJM78L05 / L12 / L24 Output Characteristics NJM78L05 Dropout Characteristics NJM78L00 Series Short Circuit Output Current NJM78L02 / L24 Quiescent Current vs. Output Current NJM78L05 Quiescent Current vs. Input Voltage Ver.2009-12-25 -7- NJM78L00 TYPICAL CHARACTERISTICS NJM78L05 / L12 / L24 Thermal Shutdown Characteristics NJM78L05 / L12 / L24 Load Characteristics NJM78L02 / L24 Ripple Rejection NJM78L05 Output Voltage vs. Temperature NJM78L12 Output Voltage vs. Temperature [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -8- Ver.2009-12-25 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: NJR: NJM78L12EA NJM78L12UA NJM78L05UA NJM78L03A NJM78L05EA NJM78L07A NJM78L10A-T3 NJM78L02UA-TE2 NJM78L15UA-TE2 NJM78L12UA-TE2 NJM78L18A-T3 NJM78L20UA-TE2 NJM78L06UA-TE2 NJM78L18A-T1 NJM78L10UA-TE1 NJM78L05UA-TE2 NJM78L05UA-TE3 NJM78L24A-T3 NJM78L24A-T1 NJM78L20A-T3 NJM78L06UA NJM78L15UA NJM78L10UA NJM78L02UA NJM78L08A-T2 NJM78L08A-T1 NJM78L08A-T3 NJM78L62A NJM78L12A-T3 NJM78L12A-T1 NJM78L03A-T3 NJM78L06A-T2 NJM78L06A-T1 NJM78L06A-T3 NJM78L02A-T1 NJM78L02A-T3 NJM78L05A-T3 NJM78L05A-T1 NJM78L18UA NJM78L09A NJM78L06A NJM78L08A NJM78L02A NJM78L03UA NJM78L10A NJM78L12A NJM78L18A NJM78L15A NJM78L20UA NJM78L18A-TE1 NJM78L24A NJM78L20A NJM78L15A-T3 NJM78L15A-T1 NJM78L09A-T3 NJM78L09A-T1 NJM78L09UA-TE2 NJM78L08UA-TE2 NJM78L09UA-TE3 NJM78L24A-TE1 NJM78L08UA NJM78L09UA NJM78L09EA NJM78L05A NJM78L05UATE1 TAPE & REEL 1000 NJM78L08UATE1 TAPE & REEL 1000 NJM78L09UATE1 TAPE & REEL 1000 NJM78L24UA NJM78L24UA-TE2 NJM#78L06A-T3 NJM#78L05A-T1 NJM#78L15A-T3 NJM#78L09A-T1 NJM#78L05A-T3 NJM#78L12A-T1 NJM#78L12A-T3 NJM#78L05UA-TE2 NJM#78L09A-T3