SBM0204R Ordering number : ENA0917 SANYO Semiconductors DATA SHEET SBM0204R Schottky Barrier Diode 40V, 0.2A Rectifier Features * * * Supports automatic mounting and permits SBM0204R applied sets to be made smaller. Low forward voltage (VF max=0.55V). Average output current : IO=0.2A. Specifications Absolute Maximum Ratings at Ta=25C Parameter Peak Reverse Voltage Symbol Conditions Ratings Unit VRM VR 40 V 40 V Average Output Current IO 0.2 A Surge Forward Current 1 A Junction Temperature IFSM Tj 125 C Storage Temperature Tstg --40 to +125 C Reverse Voltage 60Hz sine wave, 1cycle Electrical Characteristics at Ta=25C Parameter Forward Voltage Reverse Current Symbol VF IR Conditions Ratings min typ Unit max IF=0.01A 0.39 IF=0.1A 0.55 V V VR=10V 1 A VR=40V 10 A Marking : D Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 90507RS TI IM TC-00000862 No. A0917-1/4 SBM0204R Package Dimensions unit : mm (typ) 7810-001 0.3 0.12 1.2 1.6 Cathode mark 0.6 0.3 0.8 IF -- VF 1000 IR -- VR 1000 Ta=125C 100 Reverse Current, IR -- A --2 5C C 25 75 12 5 1.0 C C 10 Ta = Forward Current, IF -- mA 100 0.1 0.01 75C 10 1.0 25C 0.1 0.01 --25C 0.001 0.0001 0.001 0 0.1 0.2 0.3 0.4 0.5 Forward Voltage, VF -- V 0 0.6 20 30 Average Output Current, IO -- A 0V 0.5 DC SIN Forward Power Dissipation, PF -- W 0A 0.1 IT12834 IO -- Ta 0.5 0.2 40 Reverse Voltage, VR -- V PF -- IO 0.3 10 IT12833 t 0.4 T IO VR D=t/T VR=20V Tj=125C DC 0.3 0.5 0.2 SIN 0.1 0 0 0 0.1 0.2 0.3 0.4 Average Output Current, IO -- A 0.5 IT12835 0 25 50 75 100 Ambient Temperature, Ta -- C 125 IT12836 No. A0917-2/4 SBM0204R IO -- Tc Average Output Current, IO -- A 0V f=1MHz VR D=t/T VR=20V Tj=125C t 0.4 T DC 0.3 0.5 0.2 SIN 0.1 0 25 50 75 100 7 5 3 2 1cyc 5 4 3 2 1 0 1.0 2 3 5 7 10 2 3 5 Number of Cycles, n 7 100 IT12831 IT12838 IFSM -- t 14 Surge Forward Current, IFSM -- A 8.3ms 8.3ms 30 Reverse Voltage, VR -- V 15 6 20 10 0 Ta=25C IFSM Surge Forward Current, IFSM -- A 10 IT12837 IFSM -- n 7 Transient Thermal Resistance, Rth -- C / W 2 125 Case Temperature, Tc -- C 7 3 1.0 0 1000 C -- VR 5 IO 0A Interterminal Capacitance, C -- pF 0.5 IFSM 13 t 12 11 10 9 8 7 6 5 4 3 2 1 0 0.1 2 3 5 7 1.0 2 3 5 7 10 Time, t -- s 2 3 5 7 100 IT12839 Rth(j-c) -- t Mounted on a glass epoxy board Rth(j--a) 5 3 2 Rth(j--c) 100 7 5 3 2 10 0.0012 3 5 70.012 3 5 70.1 2 3 5 71.0 2 3 5 7 10 2 3 5 7100 2 3 5 71000 Time, t -- s IT12840 No. A0917-3/4 SBM0204R SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of September, 2007. Specifications and information herein are subject to change without notice. PS No. A0917-4/4