Catalogue 32E starrett.co.uk
Precision
Quality
Innovation
After more than 130 years, we remain as
dedicated today to the making of great
tools for our customers as we were
when L.S. Starrett founded the company
in 1880. He created a business and a
brand that has become synonymous with
precision, quality and innovation, backed
by unmatched service and support.
We accomplish this by offering application-
designed precision tools, saws, and custom
solutions that optimise job and process
performance. Our confidence hinges on
130 years of experience focusing on your
needs and your success. We take great
pride in manufacturing long-lasting, easy-to-
use tools that provide consistent and reliable
performance.
Today, Starrett offers five product categories: Precision Measurement Tools,
Metrology Equipment, Granite-based Engineered Solutions, Saw Blades, and
Jobsite and Shop Tools.
Whether you need to modify a standard tool, require assistance in selecting the
best saw blade for your cutting application or desire a custom solution for your
business, we have the breadth of knowledge to assist you.
We are committed to providing you with complete solutions created for your
exact needs. Problem solving is part of what we do every day. If the right
tool for your application does not exist, contact us – we would appreciate the
opportunity to build it.
Precision, Quality, Innovation
President and CEO
“ I have believed that I could
do no greater good than help
create a business that would
give people employment and
a chance to earn an honest
living”
– L.S.Starrett
Micrometers .......................1
Electronic Outside ....................2
Mechanical Outside ..................4
Special Function Outside ..............7
End Measuring Rods ................. 12
Heads ............................ 12
Depth ............................15
Inside ............................17
Slide Calipers .....................19
Electronic .........................20
Vernier ...........................24
Dial ..............................24
Depth & Height Gauges .............25
Electronic Depth Gauges ..............26
Electronic Height Gauges .............27
Dial & Digital Height Gauges ...........32
Hole & Slot Gauges .................33
Hole Gauges .......................34
Dial Bore Gauges ................... 36
Indicators & Gauges ................37
Electronic .........................38
Dial ..............................40
Holders ........................... 42
Special Function ....................44
Surface & Hardness Testers ..........49
Hardness Testers ...................50
Durometer ........................53
Thickness Tester ....................54
Surface Roughness Testers ............55
Squares, Precision Rules & Parallels ...59
Combination Squares ................60
Double Squares ....................64
Solid Squares ......................65
Precision Rules ..................... 66
Parallels ..........................68
Fixed Gauges .....................69
Precision Shop Tools ...............75
Precision Levels .................... 76
Edge Finders .......................78
Calipers & Dividers ..................79
Pin Vises .......................... 80
Scribers ..........................81
Tap Wrenches ...................... 81
Punches ..........................82
Precision Gauge Blocks ..............86
Saw Tension Gauge .................87
Index ............................90
i
Table of Contents
The Standard of Precision Worldwide
Starrett Office and Distribution Centre
Manufacturing Facilities
Waite Park, Minnesota, USA
Cleveland, Ohio, USA
Laguna Hills, California, USA
Mount Airy, North Carolina, USA
ii
A Global Manufacturer for Over Half a Century
Starrett’s success as a global manufacturer began in the 1950’s with the establishment of
facilities in Brazil and the United Kingdom. Today, Starrett has nine manufacturing locations
worldwide: The U.K., Brazil, China, and five in the United States.
For those who work with their hands to build or manufacture, there is no better way to ensure the
accuracy of a critical dimension than to measure it with a Starrett precision tool.
The Starrett name is your assurance of unmatched precision and quality. After more than 130
years, Starrett remains “The World's Greatest Toolmaker” – setting the continuing standard of
excellence.
Itu, São Paulo, Brazil
Suzhou, China
Jedburgh, Scotland
iii
Precision
At Starrett, we understand precision. For generations, the precision that we
build into our products has allowed our customers to ensure the quality of
their products. Precision is something we take very seriously.
Primary Standards
To ensure accuracy, manufacturers must enforce strict quality control
processes. This starts with applying primary standards for measurement and
inspection. This will ultimately lead to consistent, reliable gauging results.
Precision gauge blocks are the primary standards vital to dimensional
quality control in the manufacture of interchangeable parts. These blocks
are used for calibrating precision measuring tools and for setting numerous
comparative type gauges.
However, even gauge blocks are held to their own level of higher
standards-- Grand Master Blocks.
Accurate Reference Surfaces
Every linear measurement depends on an accurate reference surface from which
final dimensions are taken.
Precision Granite Surface Plates provide the best reference plane for work
inspection and layout prior to machining.
They are also ideal bases for making height measurements and gauging surfaces,
parallelism, etc. A high degree of flatness, stability, overall quality and workmanship
also make them ideal bases for mounting sophisticated mechanical, electronic and
optical gauging systems.
Accuracy
Starrett precision measuring tool accuracies are
based on their traceability through our grand master
gauge blocks as certified by the National Institute of
Standards and Technology (NIST).
Worldwide, no one else has produced the accuracy and
stability of Starrett-Webber croblox® Grand Masters.
They were produced in 1955 out of chromium carbide
material to an accuracy within one millionth of an inch
(.0000254mm) and have been checked periodically
by the National Bureau of Standards and the National
Institute of Standards and Technology (NIST). They
have remained stable over this period.
iv
Calibration & Repair
Starrett Tools & Gauges – Athol, MA
• Calibration of Starrett Precision Tools
• Accredited by A2LA in accordance with
ANSI/NCSL Z540-1 and ISO/IEC 17025
*Starrett Granite Division – Waite Park, MN
• Calibration of granite surface plates, granite parallels, granite straight
edges, granite tri-squares, granite angle plates and granite squares
• Surface plate, granite metrology and accessory resurfacing
• Starrett Granite Surface Plates meet or exceed U.S. Federal Specification GGG-P-463c.
NIST-traceable calibration certificate provided that is ISO/IEC 17025* compliant
• ISO 9001:2000 certified and A2LA accredited per the ISO/IEC 17025* standard
Cert. No. 200.01
Starrett precision measuring products are inspected for accuracy
with standards traceable to our grand master gauge blocks.
After a period of use, precision measuring tools require regular
preventative maintenance, periodic calibration and, sometimes,
repair.
Starrett facilities worldwide offer a variety of repair and calibration
services, and have earned appropriate accreditations and
certifications as detailed below.
Cert. No. 760.01
Quality
* Accreditations are site-specific and tool-specific. The Scope of
Accreditation is available upon request to each location.
Specifications and Certifications are subject to change.
*Starrett Webber Gauge Division – Cleveland, OH
• Accredited calibrations of Linear Gauge Blocks, Webber Height Gauges and
Standard Reference Bars, Angle Gauge Blocks, True Squares, Optical Cubes,
Optical Polygons and Optical Flats
• Accredited by NVLAP in accordance with ANSI/NCSL Z540-1 and ISO/IEC
17025*
• Calibrations also performed in accordance with ISO 10012-1and former MIL-STD-45662A
Starrett Metrology Division – Laguna Hills, CA
• Factory or field Calibration
and repairs of Optical
Projector and Vision
Systems performed by our
factory trained experts
• First generation NIST
traceable documentation for
all calibration artifacts and
standards
Administered by N.I.S.T.
Lab Code 200038-0
Starrett Indústria e Comércio Ltda. – Itu, S.P., Brazil
• Certified by INMETRO for the calibration of
measuring tools and gauge blocks
• Received ISO 9001 accreditation for the
manufacture of hand and power hacksaw blades,
band saw blades, and hole saws INMETRO
*The L. S. Starrett Company, Ltd. – Jedburgh TD8 6LR, Scotland
• ISO 9001 accredited for precision tool, band saw blade, and
hole saw manufacturing
v
Innovation
Application-Focused
Custom Solutions
When you have a Special
Measurement Problem, we will help
you find the Solution.
One way Starrett stands out from other
precision tool providers is our willingness
to work directly with customers to develop
custom tools.
Over 50 years, Starrett Special Gauge has
developed and built thousands of innovative
custom measuring solutions. Customers
include the energy, aerospace, automotive,
food packaging, high-technology plastics
and medical components industries as well
as NASA and the military.
Even with our broad catalogue of products,
some jobs require a custom solution.
After we determine that no "off-the-shelf"
product is applicable, our engineers begin
a dialogue with the customer to develop a
custom tool for the specific task. Through a
process of consultation, design, prototype
machining and testing, we develop a
specification to the full satisfaction of our
customer.
Similarly, the Starrett Metrology and
Starrett Tru-Stone Granite Technologies
Divisions work interactively with customers
to create custom solutions utilizing their
specific expertise and technologies.
At the conclusion of the process, something
that could not be measured is measured,
and a difficult problem is transformed into
an innovative, often elegant solution.
The Custom Solutions
Development Process
Your Application
Solution
Define Application
• Measurement requirement
• Workpiece shape
• Workpiece variations
• Tolerance requirements
• Throughput requirements
• Data output requirements
• Unique considerations
Catalogue Product
Many measuring application requirements
can be met by a standard catalogue product
Modified Special Order Product
We can work with you using a “menu”
of variables to make a modified standard
product that meets your requirements
Consultation
Our engineers discuss various
approaches with your engineers
Measuring
Solution?
Measuring
Solution?
Measuring
Solution?
Concept
Approval?
Design
Build
Prototype
Test &
Evaluate
Yes
Yes
Yes Yes
No
No
No
No
vi
Tools & Gauges, Engineered Metrology
Systems, Granite-based Custom Solutions
Handheld Tools & Gauges
An interactive process between customer and Starrett engineering
personnel created a gauge that measures the diameter of hot steel flat
stock while in the heat treatment process. An accurate measurement
takes only two seconds of contact, reducing radiant heat transfer and part
spoilage.
Its electronic indicator locks the reading in the display for safe reading and
is accurate to within ±0.0762mm (±.003").
Custom Gauge Fixtures
We have worked with many customers to develop a gauge to measure
a specific food container, some with lids that must fit precisely – not too
tight or loose. These containers are a perfect example of something that
defies measurement with a standard tool.
The gauge to the right uses pneumatics to withdraw probes for fast, easy
and accurate placement and unloading.
Granite-based Engineered Solutions
Engineered Metrology Systems
This application was custom developed with vision and touch probe
sensors. As is the case with many recent systems, two or even three
sensors are part of the custom solution.
The Starrett Metrology Division works closely with customers to find
solutions for complex applications on a regular basis. Their expertise is as
important to the solution as the excellence of our system hardware.
A medical devices manufacturer could not reliably measure a moving tube
on a complex 7-axis laser micro machining system because of persistent
vibration.
After extensive design consultation with our Starrett Granite Division,
the vibration-dampening attributes of granite stabilized beam delivery,
allowing measurement of the tubes at a molecular level.
vii
Items in this catalogue are available from our
network of distributors throughout Europe.
viii
Micrometers
1
An IP number is composed of two
numbers, the first referring to
protection against solid objects and
the second against liquids.
First number 6: Totally protected
against dust
Second number 7: Protection
against submersion in water under
standardized conditions of pressure for
30 minutes.
795 & 796
Electronic
Micrometers
0-100mm
Starrett 795 and 796 Electronic
Micrometers provide an IP67 level of
protection against coolant, water, chips,
dirt, dust, and other contaminants in hostile
shop environments.
The 795 includes an RS232 output port for
data transmission. The 796 has all of the
features of the 795 except that is does not
include output.
These full-featured electronic micrometers
are built with customary Starrett quality
and workmanship and are now available
with measuring capacities to 100mm.
All 795 & 796 Micrometers include a
protective case
• Millimetre/inch conversion
• Measurement HOLD button
• Ability to zero tool at any position as
well as retain and return to the true
zero reading of the micrometer
• Resolution: 0.001mm
• Accuracies: ±0.002mm
• 795 micrometers include RS232
output
• Output data to Starrett SPC Plus
hardware and software and to PCs
• Extremely hard, and stable one piece
spindle, the heart of our accuracy and
smooth operating one-piece friction
thimble
• Two 3-volt batteries included for more
than one year of normal usage
• Micro-lapped carbide measuring faces
• Automatic OFF after 20 minutes of
nonuse
Features and Specifications
• Large, easy-to-read 7mm, high-
contrast LCD digital readout
• IP67 level of protection against
coolant, water, dust and dirt
• Starrett no-glare satin chrome finish
on thimble and sleeve
• Balanced, tapered frame for
comfortable and accurate measuring
795 Electronic Micrometers with Output
Range
Friction Thimble, spindle lock,
shell & thimble metric grads.
Cat. No. EDP
0-25mm / 0-1" 795MEXFL-25 69077
25-50mm / 1-2" 795MEXFL-50 69078
50-75mm / 2-3" 795MEXFL-75 69079
75-100mm / 3-4" 795MEXFL-100 69080
796 Electronic Micrometers without output
0-25mm 796MXFL-25 69084
795 Electronic Micrometer Accessories
1m Shielded Cable to Starrett 795 PT62680-1* 62021
2m Shielded Cable to Starrett 795 PT62680-2* 62022
3m Shielded Cable to Starrett 795 PT62680-3* 62023
Adaptor from PT62680-1, PT62680-2 and PT62680-3 to PC (RS232) PT61768* 66454
* Not Stocked
795MEXFL-100
796MXFL-25
2
3732 & 733 Electronic
Micrometers
0-600mm
• 733 micrometers include data output port
• Large, high-contrast LCD readout
• Automatic OFF after 30 minutes of nonuse
• 6.35mm spindle diameter
• Smooth friction thimble for uniform pressure
• Micro-lapped carbide measuring faces
• No-glare black wrinkle finish on frame
• No-glare satin chrome finish on thimble and sleeve
• Balanced frame design for comfortable and accurate
measuring
• Ring-type knurled lock nut for quick and sure locking
• mm graduations on shell and thimble
• Instant millimetre/inch conversion
• Measurement HOLD button
• Ability to zero tool at any position
• Ability to retain and return to the true zero reading of the
micrometer
• PRESET button to install any reading at any position
• Includes one 3-volt battery for over one year of normal usage
• Includes fitted plastic case
3732 Micrometers without output
Cat. No. EDP Range Resolution Accuracy
3732MEXFL-25 12274 0-25mm 0-.984"
0.001mm
0.00005"
± 0.002mm
± 0.0001"
3732MEXFL-50 12275 25-50mm .984-1.968" ± 0.003mm
3732MEXFL-75 12276 50-75mm 1.968-2.953"
3732MEXFL-100 12277 75-100mm 2.953-3.937"
± 0.004mm3732MEXFL-125 12278 100-125mm 3.937-4.921" 0.0001"
3732MEXFL-150 12279 125-150mm 4.921-5.905"
733 Electronic Micrometers with output
733MEXFL-25 65440 0 - 25mm 0-.984" 0.001mm .00005" ± 0.002mm
± 0.0001"
733MEXFLZ-50 65441 25 - 50mm .984-1.968"
0.001mm
.00005" ± 0.003mm
733MEXFLZ-75 66079 50 - 75mm 1.968-2.950"
733MEXFLZ-100 66080 75 - 100mm 2.950-3.930"
± 0.004mm733MEXFLZ-125 66081 100 - 125mm 3.930-4.920" .0001"
733MEXFLZ-150 66082 125 - 150mm 4.920-5.900"
Accessories
Cat. No. EDP Description
PT61963* 66636 Computer Interface Cable Complete to PC (RS232C)
PT61768* 66454 Adaptor from PT22938 Cable to PC (RS232C)
PT22938* 64059 Shielded Cable to 761/772 Starrett Modules and PT61768 Adaptor
* Not Stocked
All except 733MEXFL-25 furnished with standards.
Accuracies above 25mm are as good as setting to a gauge because the mechanical and electronic components are the same on all ranges.
733MEXFL-25
3732MEXFL-100
3732MEXFL-25
3
436 Outside Micrometers
Cat. No. EDP Range Graduation Description
436.2MXRL-25 12755 0-25mm 0.01mm
Ratchet Stop, Lock Nut, Carbide Faces
V436.2MXRL-25 12766 0.001mm
436.1MXRL-50 68053 25-50mm 0.01mm
V436.1MXRL-50 68054 0.001mm
436.1MXRL-75 68056 50-75mm 0.01mm
V436.1MXRL-75 68057 0.001mm
436.1MXRL-100 68059 75-100mm 0.01mm
V436.1MXRL-100 68060 0.001mm
436.1MXRL-125 68062 100-125mm 0.01mm
V436.1MXRL-125 68063 0.001mm
436.1MXRL-150 68065 125-150mm 0.01mm
V436.1MXRL-150 68066 0.001mm
436MXRL-175 51706 150-175mm
0.01mm
436MXRL-200 51734 175-200mm
436MXRL-225 51762 200-225mm
436MXRL-250 51790 225-250mm
436MXRL-275 51818 250-275mm
436MXRL-300 51846 275-300mm
Outside Micrometer Sets
S436MEXRLZ 52014 0-300mm 0.01mm
Set Includes: 25, 50, 75, 100, 125, 150, 175,
200, 225, 250, 275 & 300mm Micrometers,
with Eleven Standards, in Case
S436.2MCXRLZ 12776 0-150mm 0.01mm Set Includes: 25, 50, 75, 100, 125 & 150mm
Micrometers, with Five Standards, in Case
25-150mm models sent in fitted plastic case.
175-300mm models sent without case, packed one each to a box.
436 Outside
Micrometers & Sets
0-600mm
• The most popular precision
micrometers used by skilled workmen
worldwide
• Accurate, rugged, and easy to use
• Anvils sized at 6.35mm diameter
Readability
• Starrett satin chrome finish – no glare
– resists rust
• Advanced sleeve design with
staggered lines and distinct figures for
precise and easy readability
Ease-of-Handling
• Rachet stop
• Carbide measuring faces
• Balanced frame and thimble design
ensure easy handling
• Ring-type knurled lock nut for quick
and sure locking
• Smooth friction thimble for uniform
pressure, the combination ratchet
and speeder for uniform pressure
and quicker adjustment, or a plain
micro meter that depends on your own
“feel”
• Gracefully designed tapered frame for
use in narrow slots and tight places
Accuracy and Long-Life
• Rigid steel frame ribbed for extra
strength on sizes through 150mm
• Extremely hard and stable one-piece
spindle (the heart of our accuracy)
• Micro-lapped measuring faces
• Quick and easy adjustment
Sets
• Recommended for mechanics,
automotive service and machine
shops, toolrooms, inspection
departments, and wherever
gauging involves a wide range of
measurements
• Attractive, protective cases keep
micrometers and standards together,
readily accessible.
436.1MXL-50
4
444 Outside Micrometers
with Insulated Frames
0-150mm
• Micrometer with a thermal insulator cover mounted on
the frame to avoid measuring errors
• Rigid one piece frame of drop forged steel
• Extremely hard and stable one piece spindle
• Micro lapped carbide measuring faces
444 Micrometers (0-150mm Range)
Cat. No. EDP Range Graduation
444MXRL-25 11980 0-25mm 0.01mm
444MXRL-50 11981 25-50mm 0.01mm
444MXRL-75 11982 50-75mm 0.01mm
444MXRL-100 11983 75-100mm 0.01mm
444MXRL-125 11984 100-125mm 0.01mm
444MXRL-150 11985 125-150mm 0.01mm
3206 Outside Micrometer Stand
Cat. No. EDP Description
3206 68917 Outside Micrometer Stand
3206 Outside Micrometer
Stand
• This stand converts outside micrometers to a sturdy
bench gauge for batch inspection of small parts
• Useful as a handy bench vise or assembly fixture
• Gripping surfaces are two replaceable nylon pads
• Ball joint construction allows head to be positioned as
much as 30° off perpendicular in any direction
• Positive lock on the base
• Base dimension is 162mm long x 89mm wide x 19mm
thick
• Tilting head clamping capability is 19mm thick x 25mm
throat depth
• Accommodates all Starrett 13mm and 25mm outside
micrometers, 2 and 2A outside micrometers and 210,
220, 483, 485, 569 special purpose outside micrometers
444MXRL150
5
224
Interchangeable
Anvil Micrometers
0-600mm
Unusual flexibility, plus a wide range of
measurement makes the Starrett 224
satin-chrome micrometers very popular in
machine or automotive repair shops and
for all applications requiring a versatile
micrometer.
Each micrometer is equipped with a
series of easily interchangeable anvils,
thus providing the full range in steps of
25mm with a single micrometer. Suitable
wrenches are furnished to make necessary
adjustments.
These larger sizes have 7.6mm anvil and
spindle diameters for ease of use on larger
work.
Readability features
• Starrett satin chrome finish – no glare
– resists rust
• Advanced sleeve design with
staggered lines and distinct figures for
precise and easy readability
• Large thimble diameter with distinct
figures
Ease-of-Handling Features
• Balanced frame and thimble design
ensure easy handling and better
readability
• Ring-type knurled lock nut for quick
and sure locking
• Combination ratchet and speeder
for uniform pressure and quicker
adjustment
Accuracy and Long-Life Features
• Rigid and stable special cast iron
frame with appropriate perforations
for lightness and ribbed for strength
and stability
• Extremely hard and stable one-piece
spindle (the heart of our accuracy)
• Interchangeable anvils
• Micro-lapped measuring faces
• Quick and easy sleeve adjustment
224 Interchangeable Anvil Micrometers
Range Graduation
With Ratchet Stop, Lock Nut, In Case
234 Standards FurnishedCat. No. EDP
0-100mm
0.01mm
224MAARLZ 50771 25, 50, 75mm
50-150mm 224MARLZ 50773 50, 75, 100, 125mm
150-300mm 224MGRLZ 50777 150, 175, 200, 225, 250, 275mm
300-400mm 224MDRLZ 50781 300, 325, 350, 375mm
400-500mm 224MERLZ 50783 400, 425, 450, 475mm
500-600mm 224MJRLZ 50785 500, 525, 550, 575mm
224MAARLZ pictured
without case
224MAARLZ
in Case
6
256 Disc-Type Micrometers
with rotating or non-rotating
spindles
0-75mm
These tools are used to measure the thickness of work sections
such as ribs, lands, fins, cutting edges on form tools, and chordal
thickness of gear teeth. Because of their large anvil and spindle
faces, the 25mm size is also useful for measuring the thickness of
sheet materials like paper, cardboard, rubber, and plastics.
Readability Features
• Starrett satin chrome finish – no glare – resists rust
• Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
• Quick-reading figures
Ease-of-Handling Features
• Balanced frame and thimble design ensure easy handling and
better readability
• Ring-type knurled lock nut for quick and sure locking
• Combination ratchet and speeder for uniform pressure and
quicker adjustment on all sizes
• Gracefully designed tapered frame for use in narrow slots and
tight places
• Anvil and spindle discs are 12.7mm diameter tapering to
0.4mm edge thickness making it possible to enter narrow
grooves and recesses
• Available in 25mm size with rotating or non-rotating spindle
Accuracy and Long-Life Features
• Rigid one-piece frame of drop forged steel
• Extremely hard and stable one-piece spindle (the heart of our
accuracy)
• Micro-lapped measuring faces
• Quick and easy adjustment
• Starrett workmanship
• This tool is accurate to ±0.003mm measuring over the whole
surface and ±0.004mm measuring on the edges
256M Disc-Type Micrometers (0.01mm Graduation)
Range Description Cat. No. EDP
0-25mm Ratchet Stop, Lock Nut 256MRL-25 51238
0-25mm With Non-Rotating Spindle 256MPN-25 56470
25-50mm Ratchet Stop, Lock Nut 256MRL-50 55942
50-75mm Ratchet Stop, Lock Nut 256MRL-75 55943
256MPN-25
256MRL-50
7
483 V-Anvil Micrometers
2-25mm
Used to check out-of-roundness from centreless grinding or
other machining operations. Also used for measuring odd fluted
taps, milling cutters, and reamers.
Readability Features
• Direct measuring of three and five-fluted tools
• Starrett satin chrome finish – no glare – resists rust
• Advanced sleeve design for precise and easy readability
• Quick-reading figures
Ease-of-Handling Features
• Balanced frame and thimble design ensure easy handling
and readability
• Ring-type knurled lock nut for quick and sure locking
• Combination ratchet and speeder for uniform pressure
and quick adjustment
Accuracy and Long-Life Features
• Rigid one-piece frame of drop forged steel
• Extremely hard and stable one-piece spindle (the heart of
our accuracy)
• Micro-lapped measuring faces
• Carbide facing on spindle and anvils for extra long wear
• Quick and easy adjustment
483 V-Anvil Micrometers
Cat. No. EDP Range Graduation No. of Flutes It Will Measure Description
483MXRL-25 56046 2-25mm 0.01mm 3 Ratchet Stop, Lock Nut, Tapered Spindle
486 Blade Type Micrometers (0-100mm Range)
Cat. No. EDP Range Graduation Description
486MP-25 64257 0-25mm
0.01mm With Speeder
486MP-50 64258 25-50mm
486MP-75 64259 50-75mm
486MP-100 64260 75-100mm
486 Blade Type Micrometers
with non-rotating spindle
0-150mm
Here is another special function Starrett micrometer. It is
designed for fast and accurate measurements of circular form
tools, diameter and depth of narrow grooves, slots, keyways,
recesses, and depths between lands and fins.
Readability Features
• Starrett satin chrome finish – no glare – resists rust
• Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Ease-of-Handling Features
• Balanced frame and thimble design ensure easy handling
and better readability
• Speeder for quicker adjustment on all sizes
• Non-rotating spindle prevents blade from turning in
narrow slots or rolling off shoulder
• The blades are 0.8mm thick
• Blades will measure to 8mm depths
Accuracy and Long-Life Features
• Rigid steel frame ribbed for extra strength on sizes
through 150mm
• Extremely hard and stable one-piece spindle (the heart of
our accuracy)
• Quick and easy adjustment
483MXRL-25
486MP-25
8
576 & 577 Micrometers with
rounded anvils
0-13mm & 0-25mm
These micrometers are all extremely useful for measuring the
wall thickness of parts such as solid and split bearings, tubing,
sleeves, collars, rings, various cylinders, and also measuring
from the inside of a hole to an edge. Both have a rounded anvil
which contacts the inside curved surface and a flat spindle
for contacting the outside of the work, thus producing single
point contact. This permits accurate gauging of curved surface
thickness in hundredths of a millimetre.
Capacity:
• The 576 can access holes as small as 8mm and measure
up to 13mm
• The 577 can access holes as small as 9.5mm and
measure up to 25mm
Readability Features
• Starrett satin chrome finish – no glare – resists rust
• Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Ease-of-Handling Features
• Balanced frame and thimble design ensure easy handling
and readability
• Gracefully designed tapered frame for narrow slots and
tight places
Accuracy and Long-Life Features
• Rigid steel frames
• Extremely hard and stable one-piece spindle (the heart of
our accuracy)
• Micro-lapped measuring face
• Quick and easy adjustment
576 & 577 Micrometers (0-25mm Range)
Cat. No. EDP Range Graduation Description
576MXR 66442 0-13mm
0.01mm
Ratchet Stop, Full Finish
Tapered Frame, Carbide Faced
Spindle
577MXP 66444 0-25mm Full Finish Tapered Frame,
Carbide Faces
207 & 208 Stainless Steel
Can Seam Micrometers
Starrett Can Seam Micrometers are made of stainless steel and
designed to measure the thickness and depth of can seams.
The 207 micrometer is used to measure the seam at outside
bottom edge of dome on top of aerosol cans. The 208
micrometer is used to measure thickness of seam at top and
bottom of flat-topped cans. 208D is used to measure thickness
and depth of all standard can seams.
Readability Features
• Satin finish stainless steel – no glare – rust and stain
resistant
• Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
• Quick-reading figures
Ease-of-Handling Features
• The 207 has a snub nose which permits measuring
aerosol type cans
Accuracy and Long-Life Features
• Extremely hard and stable one-piece spindle (the heart of
our accuracy)
• Quick and easy adjustment
207 & 208 Stainless Steel Can Seam Micrometers (0-9.5mm Range)
Cat. No. EDP Graduation Description
207MZ 64337
0.01mm
Snub Nose for Aerosol Cans
208MZ 64338 Without Depth Gauge
208MDZ 63191 With Depth Gauge (5mm Range)
576MXR 577MXP 208MDZ
207MZ
9
220 Mul-T-Anvil Micrometer
0-50mm
This tool was a new development in micrometer design and patent
is held by Starrett. This micrometer will handle a wide variety of
measurements impossible to obtain with regular micrometers,
such as measuring the wall thickness of tubing, cylindrical walls
from a hole or slot to an edge, many hard-to-reach locations, and
the thickness of screw heads, shoulder lengths, etc.
A most interesting feature of this tool is that additional anvils of
various shapes can be made up, and many of these anvils do not
have to be hardened for that “special job”.
This micrometer is furnished with 0.01mm graduations for easier
and more accurate readings. The Starrett Company, with our years
of experience, recommends this because the anvils on this type of
tool are not backed up by a frame as in a regular micrometer and
could bend slightly.
Ease-of-Handling Features
• Balanced frame and thimble design ensure easy handling,
better readability
• Ring-type knurled lock nut for quick and sure locking
• A choice of smooth friction thimble for uniform pressure or
the combination ratchet and speeder for uniform pressure
and quicker adjustment
• Interchangeable anvils are rigidly held in the vise type frame
and quickly interchanged by a single lock screw adjustment
• Two hardened anvils furnished – round anvil approximately
3mm diameter and flat anvil approximately 3mm and 1.5mm
thick
• “V” Anvil for measuring thickness of screw heads and
shoulder lengths available separately
• Accommodates special anvils up to 8mm thick
• Can be used as a height gauge by removing the vise jaw
Readability Features
• Starrett satin chrome finish – no glare – resists rust
• Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
• Quick-reading figures
Accuracy and Long-Life Features
• Rigid one-piece frame of drop forged steel
• Extremely hard and stable one-piece spindle (the heart of our
accuracy)
• Micro-lapped measuring faces
• Quick and easy adjustment
• Tool is accurate to ± 0.004mm
220 Mul-T-Anvil Micrometers
With Round and Flat Anvils and Carbide Faced Spindle
Range Graduation
Ratchet Stop, Lock Nut
Cat. No. EDP
0-25mm 0.01mm 220MXRL-25 65050
V-Anvil only: Order PT13017, EDP 71399
Furnished in fitted case.
220MXRL-25
10
222 Sheet Metal Micrometer
0-25mm
These micrometers reach over the edge of sheet metal and take
measurements away from the edge toward the centre. Also for other
gauging jobs where a deep throat micrometer is needed. Rounded
anvil on 25mm size gives a point contact for more accurate
gauging; flat anvil is also available. The 25mm micrometer frames
have black wrinkle finish.
Readability Features
• Starrett satin chrome finish – no glare – resists rust
• Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability
Ease-of-Handling Features
• Balanced frame and thimble design ensure easy handling and
better readability
• Combination ratchet and speeder for uniform pressure and
quicker adjustment
Accuracy and Long-Life Features
• Rigid one-piece frame of drop forged steel, ribbed for
strength and stability
• Extremely hard and stable one-piece spindle (the heart of our
accuracy)
• Micro-lapped measuring face
• Quick and easy adjustment
222 Sheet Metal Micrometer, 150mm Throat Depth (0-25mm Range)
Cat. No. EDP Anvil Graduation Description
222MAXR-25 66435 Rounded 0.01mm Ratchet Stop, Carbide Faces
Sent with rounded anvil unless otherwise ordered.
Packed one in a box without case.
222MBXR-25
11
234 End Measuring Rods
with spherical ends
25-600mm
These rods or “standards” are for checking and setting
micrometers of 50mm capacity and larger, and are also used
on machine tools for comparing gauges, checking precision
measuring tools, for measuring parallel surfaces, and many
other types of work.
They are made of special tool steel in rod form with ends
hardened and accurately lapped to a spherical radius.
Supplied with insulated handles to minimize expansion by heat
when held in the hand. 25-150mm sizes are 6.3mm diameter;
175-275mm sizes, 9.5mm diameter; 300mm size is 11mm
diameter.
NOTE: These standards are used for all micrometers furnished
with standards. Larger sizes available on special order.
234 End Measuring Rods
Cat. No. EDP
25mm 234MA-25 50970
50mm 234MA-50 50972
75mm 234MA-75 50974
100mm 234MA-100 50976
125mm 234MA-125 50978
150mm 234MA-150 50980
175mm 234MA-175 50982
200mm 234MA-200 50984
225mm 234MA-225 50986
250mm 234MA-250 50988
275mm 234MA-275 50990
300mm 234MA-300 50992
263 Micrometer Heads
0-25mm
• Reading surfaces satin-finished for easy readability
• No-glare, satin chrome finish
• Available with reverse reading, if needed
• Ring-type knurled lock nut for quick and sure locking
• Choice of smooth friction thimble for uniform pressure,
combination ratchet and speeder for uniform pressure and
quicker adjustment, or a plain micrometer head that depends
on your own “feel”
• Spindle face available plain or with carbide
• Furnished with 12.7mm diameter clamping surface, but also
available with 9.5mm clamping diameter on special order
263 Micrometer Heads
Range Graduation Cat. No. EDP Description
0-25mm 0.01mm
263MP* 51275 Plain
263ML* 51276 Lock Nut
263MRL* 51257 Ratchet Stop, Lock Nut
0.001mm V263MRL* 55962 Ratchet Stop, Lock Nut
* Specify clamping diameter 12 or 12.7mm. 12.7mm sent unless otherwise ordered.
234MA-100 & 234MA-300 263MRL
12
460 Micrometer Heads
0-13mm
Plain micrometer heads with no lock nut or ratchet.
460 Micrometer Heads
Range Graduation Cat. No. EDP Description
0-13mm 0.01mm 460MB 64447 Plain
463 Micrometer Heads
0-13mm 0.01mm 463MP 52444 Plain
463MRL 52452 Ratchet Stop, Lock Nut
63 Micrometer Heads
0-50mm 0.01mm 63MRL* 55939 Ratchet Stop, Lock Nut
* Specify clamping diameter 12mm or 12.7mm. 12.7mm sent unless otherwise ordered.
460MB (0-13mm) dimensions
6mm
16mm
50.8mm
3.510mm
3.500mm
5.999mm
5.989mm
10mm
463 Micrometer Heads
0-13mm
The 463 is made from rust-resistant stainless steel. The
reading surfaces are satin finished stainless steel for easy
readability. Heads are available with the features below:
• Either combination ratchet and speeder for uniform
pressure and quicker adjustment, or plain micrometer
heads that depend on your own feel
• Ring-type lock nut for quick and sure locking at any
setting
• Reverse reading, if needed
• Plain or carbide spindle faces
463MP (0-13mm) dimensions
463MRL (0-13mm) dimensions
19.0mm
66.7mm
5.080mm
5.078mm 9.523mm
9.510mm 14mm
9.5mm
42mm
85.7mm
19.0mm
5.080mm
5.078mm 9.523mm
9.510mm 14mm
9.5mm
9.5mm
63 Long Range Micrometer
Heads
0-50mm
When long spindle travel is required, the 63 micrometer heads
provide a range that will handle most applications, such as in
electronic equipment, machine tools, special gauges, tooling,
etc.
175mm
83mm
19mm
16mm 16mm
10mm
57mm
12.000mm
or
12.700mm
+.000
-.007
5.97mm
63MRL (0-50mm) dimensions
460MB 463MRL
63MRL
13
762 Electronic Micrometer
Heads with rotating or non-
rotating spindles (with output)
0-50mm / 0-2"
Readability Features
• Large digital readout is easy to read, reducing errors
• Attractive black wrinkle finish on frame
• Starrett no-glare satin chrome finish on thimble and sleeve
Ease-of-Handling Features
• Ring-type knurled lock nut
• Smooth friction thimble for uniform pressure on regular heads
and combination ratchet and speeder on non-rotating heads
Accuracy and Long-Life Features
• Extremely hard and stable one-piece spindle (the heart of our
accuracy)
• Micro-lapped carbide face
• One 3-volt battery furnished for over a year of normal usage
• Auto OFF after 30 minutes of non use
Full-Function Action Features
• Millimetre/Inch conversion
• Turn on in millimetre mode after battery installation
• Measurement HOLD button
• Ability to zero tool at any position
• Ability to retain and return to the true zero reading of the
micrometer
• PRESET button to install any reading at any position
• RS232 data output port
762 Electronic Micrometer Heads
with Standard Millimetre Graduations on Shell and Thimble
Range Description** Cat. No. EDP
0-25mm/0-1" Friction Thimble, Lock Nut and 762MEXFL-25 66077
0-50mm/0-2" Carbide Face 762MEXFL-50 66137
Cable Information for 762M Electronic Micrometer Heads
Computer Interface Cable Complete to PC (RS232C) PT61963* 66636
Adaptor from PT22938 Cable to PC (RS232C) PT61768* 66454
Shielded Cable to 761/772 Starrett Modules and
PT61768 Adaptor PT22938* 64059
* Not Stocked
** 12.7mm clamping diameter sent unless otherwise specified.
0-25mm dimensions
6.35mm
.250"
12.700mm
.4994"
12mm
3/4"
19mm
3/4"
38mm
1-1/2"
48mm
1-7/8"
157mm
6-3/16"
19mm
3/4"
22mm
7/8"
41mm
1-5/8"
44mm
1-3/4"
56 mm
2-3/16"
58mm
2-9/32"
32mm
1-1/4"
0-50mm dimensions
6.35mm
.250"
19mm
3/4"
19mm
3/4"
38mm
1-1/2"
48mm
1 7/8"
204mm
8-3/64"
19mm
3/4"
22mm
7/8"
41mm
1-5/8"
56mm
2-3/16"
80mm
3-5/32"
57mm
2-1/4"
12.700mm
.4994"
44mm
1-3/4"
762 Micrometer Specifications
Millimetre Inch
Resolution 0.001mm .00005"
Accuracy ±0.003mm per 25mm ±.0001" per Inch
762MEXFL-50
14
440 & 445 Depth Micrometers
0-225mm
• Measure depths of holes, slots, shoulders and projections to
0.01mm
• 440 gauges furnished with a 63.5mm base and 3.2mm
diameter measuring rods
• 445 gauges furnished with choices of 75mm, 100mm, and
150mm bases and have 4mm diameter measuring rods
• Combination ratchet and speeder for uniform pressure and
quicker adjustment
• Ring-type lock nut for quick and sure locking
• With ratchet stop and lock nut in case
440 & 445 Depth Micrometers (0.01mm Graduation)
Range Base Rods Rod Dia. Cat. No. EDP
0-75mm
63.5mm
3
3.2mm
440MZ-75RL 52116
0-150mm 6 440MZ-150RL 52120
0-225mm 9 440MZ-225RL 52124
0-75mm
100mm
3
4mm
445MBZ-75RL 52221
0-150mm 6 445MBZ-150RL 52225
0-225mm 9 445MBZ-225RL 52229
449 Micrometer Depth Gauges (0.01mm Graduation)
0-75mm 63.5mm 3
1.2 x
3.2mm
449MAZ-75R 56636
0-150mm 63.5mm 6 449MAZ-150R 56637
0-75mm 100mm 3 449MBZ-75R 56638
0-150mm 100mm 6 449MBZ-150R 56639
449 Micrometer Depth Gauges
with non-rotating blades
0-150mm
By holding the base in one hand, the 1.2mm thick x 3.2mm wide
blade can be turned with the fingers and positioned at any angle
relative to the base. In operation, blade does not turn, but moves
perpendicularly only, permitting depth measurement of narrow
shoulders without the blade rolling off. This is also ideal for slots
and recesses as narrow as 1.2mm. Furnished with a 63mm or
100mm base.
Also available with 3 rods for measuring 0-75mm, or 6 rods for
measuring 0-150mm in 0.01mm increments.
This tool comes with the combination ratchet and speeder for
uniform pressure and quicker adjustment.
445MBZ
449MA
440MRL
15
749 Electronic Micrometer
Depth Gauge (with output)
0-150mm
The Starrett 749 electronic depth micrometer has a wide range
for measuring the depth of most holes, slots, shoulders and
projections.
Readability Features
• Large high-contrast LCD digital readout
• Resolution: 0.001mm
• Millimetre graduations standard
• No-glare black wrinkle finish frame
• No-glare satin chrome finish on thimble and sleeve
Ease-of-Handling Features
• Ring-type knurled lock nut
• Combination ratchet and speeder
Accuracy and Long-Life Features
• Ground and lapped one-piece spindle
• Base length 100mm; rod diameter 4mm
• One 3-volt battery capable of over one year’s normal usage
• Automatic OFF after 30 minutes of nonuse
• Full-Function Action Features
• Instant millimetre/inch conversion
• Turns on in millimetre mode after battery installation
• Measurement HOLD button
• Ability to zero at any position and retain and return to true
zero reading
• PRESET button to install any reading at any position
• Ability to install minimum and maximum limits
• RS232 data output port
749 Electronic Micrometer Depth Gauges, Standard Millimetre Graduations on Shell and Thimble
Cat. No. EDP Description
749MEBZ-150 66124 0-150mm Range, with Case
Cable Information for 749 Electronic Micrometer Depth Gauges
Part No. EDP Description
PT61963* 66636 Computer Interface Cable Complete to PC (RS232C)
PT61768* 66454 Adaptor from PT22938 Cable to PC (RS232C)
PT22938* 64059 Shielded Cable to 761/772 Starrett Modules and PT61768 Adaptor
* Not Stocked
749MEBZ-150
16
124 Solid -Rod Inside
Micrometer Sets
50-800mm
These are the most popular inside micrometers because of
their lightness, ease of use, and range. They are very useful for
measuring inside diameters of cylinders and rings, measuring
parallel surfaces, etc.
The desired range is obtained by assembling rods and spacing
collars to the micrometer head. Measuring rods are provided
with a shoulder that is set accurately in the micrometer head and
locked in position. When assembling rods to the A and B heads,
the reading line on the micrometer head should be lined up with
the marking on each rod (except 50-75mm rods).
Rod diameters are approximately 6mm on the A and B sizes,
and approximately 8.5mm on the C size. Each rod has individual
length adjustment for the anvil by means of the supplied special
wrenches.
• Measuring rods are solid and assembled on one side of the
micrometer head
• Insulated rods marked with length
• Hardened and ground anvils on rods, adjustable for length.
Head anvil is hardened and ground
• A convenient handle (length 165mm) is available to
provide reach for use in deep holes. Handle screws into the
micrometer head in place of the dummy screw, which is
opposite a rod lock screw
124 Solid -Rod Inside Micrometer Sets (0.01mm Graduation)
Range Screw Movement Measuring Rods Spacing Collars
With Case
Cat. No. EDP
50-200mm 13mm 6 One 12mm 124MAZ 56141
50-300mm 13mm 10 One 12mm 124MBZ 56142
200-800mm 25mm 4 One 25mm Two 50mm 124MCZ 56143
124MAZ
17
823 Tubular Inside Micrometer
Sets
40-1000mm
The Starrett 823 micrometers are highly useful tools for internal
linear measurements such as measuring cylinders, rings, setting
calipers, comparing gauges and measuring parallel surfaces.
The extension rods are made of steel tubing, light in weight, yet
extremely rigid. Rods are approximately 9.5mm diameter to meet
the requirements of mechanics who prefer this larger diameter.
By removing the hardened and ground anvil ends (end caps) of
the micrometer head, the rods may be attached to either or both
ends of the micrometer as preferred. Each rod may be individually
adjusted for wear by the hardened and ground anvil at the end.
• Tubular measuring rods are lightweight, yet extremely rigid.
Rods are insulated, with the exception of 13mm and 25mm
sizes
• Each rod is marked with length
• Hardened and ground anvils on rods are adjustable for length
• Head anvil is hardened and ground
• Interchangeable anvils on both 13mm and 25mm heads
• Lock nut furnished on 25mm heads
• 140mm long, convenient handle furnished on A, B, F
micrometers may be clamped where it will provide correct
balance and reach
Rods attachable as
shown to either one
or both ends of the
head ensures the
best balance, feel,
and ease of reading
823MAZ 40-200mm set with tool, rods, handle and wrenches
823M Tubular Inside Micrometer Head
823 Tubular Inside Micrometer Sets (0.01mm Graduation)
Rang e
Movement of
Screw Description Cat. No. EDP
40 -200mm 13mm With 6 Rods and Handle 823MAZ 53051
40-300mm With 8 Rods and Handle 823MBZ 53053
100-1000mm 25mm With 10 Rods 823MEZ 53057
Each set furnished in attractive, protective case with assembly instructions for various measurements.
823MEZ 100-1000mm set with tool, rods, handle and wrenches
18
Slide Calipers
19
798 Electronic Calipers
0-300mm
• Large, easy to read LCD, 7.874mm/.310" character height
• IP67* protection
• Induction type linear encoder system
• 798B Calipers include electronic data output - Patented non-
contact RS-232
• Heavy-duty bar and slide, 3.5mm thick
• Hardened stainless steel measuring surfaces for long life
• Fine adjustment
• Slide lock
• Linear accuracy meets DIN862
• 0.010mm/.0005" resolution
• CR2032 3V battery (> 1 year battery life under normal use)
• mm/Inch conversion
• Zero at any position
• Automatic shutoff of the display after 30 minutes of non-use
• Reactivation of display with movement of slide with no loss of
position
798 Electronic Calipers
Range Description Cat. No. EDP
150mm Caliper with Output in Fitted Plastic Case 798B-6/150 12521
Caliper without Output in Fitted Plastic Case 798A-6/150 20798
200mm Caliper with Output in Fitted Plastic Case 798B-8/200 12523
Caliper without Output in Fitted Plastic Case 798A-8/200 20799
300mm Caliper with Output in Fitted Plastic Case 798B-12/300 12525
Caliper without Output in Fitted Plastic Case 798A-12/300 20800
Accessories, Cables and Case Information for 798 Electronic Calipers
Description Cat. No. EDP
Centre Distance Attachment PT26151* 64440
Depth Attachment PT22431* 64640
Non-contact Computer Interface Cable to PC (USB) with Driver CD PT63329* 12732
Replacement Non-contact Computer Interface Cable to PC (USB) PT63329-1* 12733
* Not Stocked
According to IEC60529, IP67 stands for:
– The first number "6" identifies
protection against ingress of dust
– The second number "7" identifies
protection against submersion in
water under standardised conditions of
pressure for 30 minutes.
IP67
IP67
Approximate Jaw Depths for 798 Electronic Calipers
150mm 200mm 300mm
Outside 38mm 47.6mm 63.5mm
Inside 16mm 19mm 19mm
20
21
799 Electronic
Calipers
0-1000mm / 0-40"
Starrett’s 799 Electronic Calipers are light,
comfortable, easy-to-use, and constructed
with features that have made Starrett slide
calipers the machinist’s first choice for
many years.
The 799 offers a slim, streamlined profile,
a large, clear, easy-to-read LCD display,
long battery life, and function buttons for
zero and mm/inch.
799 calipers are available in 150, 200,
and 300mm sizes and the newly available
extended range 600mm and 1000mm. All
sizes furnished in a fitted, protective case.
Features (all sizes)
• Lightweight, ergonomic design
• Millimetre/inch conversion reads
0.01mm or .0005"
• Easy access to the single, long-life
battery
• Last measuring position retained
when shut off
• Hardened stainless steel body for long
life
• Fine adjustment thumb wheel
• Lock screw to hold the slide in
position
• Resolution is 0.01mm / .0005"
• Zero at any position
150, 200 & 300mm Calipers Only
• Large easy-to-read LCD, 8mm/.32"
high characters
• Automatic shut-off after 5 minutes of
nonuse
• Linear accuracy meets DIN862
• Integrated depth rod
600 & 1000mm Calipers
• Preset and hold feature
• Minimum and maximum limits set
• I.D. jaw dimension is
20.32mm/0.800"
• LCD characters are 12.7mm/.50" high
• Auto shut-off after 30 minutes of
non-use
799AZ-24/600
22
799 Electronic Calipers
Range Description Cat. No. EDP
150mm / 6" Caliper in Fitted Plastic Case 799A-6/150 67410
200mm / 8" Caliper in Fitted Plastic Case 799A-8/200 67412
300mm / 12" Caliper in Fitted Plastic Case 799A-12/300 67621
600mm / 24" Caliper in Fitted Plastic Case 799AZ-24/600 11978
1000mm / 40" Caliper in Fitted Plastic Case 799AZ-40/1000 11979
Accessories and Case Information for 799 Electronic Calipers
Description Cat. No. EDP
150, 200 & 300mm Centre Distance Attachment PT26151* 64440
Calipers Only Depth Attachment PT22431* 64640
* Not Stocked
799A-6/150
799A-12/300
799A-8/200
799AZ-40/1000
Approximate Jaw Depths for 799 Electronic Calipers
150mm 200mm 300mm 600mm 1000mm
Outside 38mm 50.8mm 63.5mm 100mm 150mm
Inside 16mm 19mm 18.3mm 17.46mm 17.46mm
23
1201 & 1202 Dial Calipers
0-300mm
With the ability to provide quick, accurate measurement of O.D., I.D. and
depth, the dial caliper is the most versatile precision hand tool on the
market.
1202 Dial Calipers are based on the caliper that has been the
first choice of metal working professionals for decades. 1202 Dial
Calipers are available in 150, 200 and 300mm versions.
Includes fitted case.
Readability Features
• Sharp, clear dial graduations of 0.025mm with 2.54mm per
revolution
• Sharp, black graduations on the satin finished bar, every
2.54mm
Ease-of-Handling Features
• Knife-edge contacts
• Thumb-operated fine adjustment roll
• Adjustable bezel
• Lock screws for sliding jaw and dial bezel
• Covered rack depth rod (150 and 200mm models)
Accuracy and Long-Life Features
• Hardened stainless steel bar, measuring surfaces, rack, gears
and depth rod
• Positive, spring-loaded double pinion anti-backlash control
1201 Dial Calipers
Range Graduations Cat. No. EDP
0-150mm 0.01mm 1201M-150 66962
0-200mm 1201M-200 66976
1202 Dial Calipers
0-150mm
0.02mm
1202M-150 66963
0-200mm 1202M-200 66977
0-300mm 1202M-300 66978
125 Vernier Calipers
Range Graduations Cat. No. EDP
0-150mm 0.02mm 125MA-150 61880
0-150mm / 0-6" 0.02mm/0.001" 125MEA-6/150 61660
0-150mm 0.05mm 125MB-150 61881
0-200mm 0.02mm 125MA-200 61884
0-200mm / 0-8" 0.02mm/0.001" 125MEA-8/200 61882
0-200mm 0.05mm 125MB-200 61885
0-300mm 0.02mm 125MA-300 61888
0-300mm / 0-12" 0.02mm/0.001" 125MEA-12/300 61886
0-300mm 0.05mm 125MB-300 61889
125 Vernier Calipers
0-300mm / 0-12"
• High quality, basic vernier caliper that
offers metric and metric / imperial
measurement
• Lock screw for sliding jaw
• Hardened stainless steel depth rod
• Sharp, black graduations on the satin
finished bar
24
Depth and Height Gauges
25
3753 Electronic
Depth Gauges
0-300mm / 0-12"
The Starrett 3753 Electronic Depth
Gauge is light and easy to use for depth
measurements within its range.
Readability Features
• Clear, easily-read numbers, properly
sized for the tool
Design Features for Accuracy and
Long Life
• Linear accuracy: ±0.03mm / ±.001"
• Resolution: 0.01mm / .0005"
• Exclusive Starrett designed
microprocessor chip
• Hardened stainless steel body and
slide for long life
• Fine adjustment thumb roll for
precision measurements
• Lock to hold the slide in position
3753 Electronic Depth Gauges
Cat. No. EDP Description
3753A-6/150 12258 150mm/0-6" Range, Depth Gauge in Case
3753A-8/200 12259 200mm/0-8" Range, Depth Gauge in Case
3753A-12/300 12260 300mm/0-12" Range, Depth Gauge in Case
Accessories for 3753 Electronic Depth Gauges
3648-180 12261 180mm Base Extension
3648-260 12262 260mm Base Extension
3648-320 12263 320mm Base Extension
PT99492* 65650 Two 3-Volt Batteries, CR2032
* Not Stocked
• Hardened base is 99mm / 3-15/16"
long, but optional base extensions
of 175 and 300mm / 7" and 12" are
available. Spacing between holes is
70mm / 2-3/4".
• A hook attachment is furnished
with the gauge, making it possible
to take readings from the edge of a
workpiece to edges of slots, grooves,
shoulders, and other I.D. length
dimensioning. The removable hook
has the screw permanently attached
to prevent loss.
• One-year minimum battery life with
furnished 3-volt battery, CR2032
Action Features with Five Control
Buttons
• Inch/millimetre conversion
• Zero at any position
• Hold readout at any position
• Manual ON/OFF plus a built in
automatic OFF after 15 minutes of
nonuse
• LIMITS button allows high and low
limits to be set. Out-of-imits readings
will show a flashing display.
3753 shown with 3648-180
base extension attachment
26
3753 shown with 3648-180
base extension attachment
3751 Electronic Height Gauge
(without output)
150mm / 0-6"
This height gauge is light, portable and easy to use for vertical
measurements within its range.
Readability Features
• Easy-to-read LCD 8mm / .32" high characters
Accuracy and Long Life Design Features
• Hardened, stainless steel bar for long life
• Fine adjustment thumb roll for precision measurements
• Rounded nose scriber cuts clean, sharp lines with
smoothness and less pressure
• Lock to hold the slide in position
• Hardened, ground, and lapped base with finger grooves
provides ease of movement
• Easy access to single long-life battery, 3-volt CR2032
• Vertical bar is back from the edge of the nose for better
stability
• Scriber can reference zero from the bottom of the base to get
the full 150mm / 6" usable range
• Linear Accuracy: ± 0.02mm / ±.001"
• Resolution: 0.01mm / .0005"
Action Features with Three Control Buttons
• Millimetre/inch conversion
• Zero at any position
• Manual ON/OFF plus a built in automatic OFF after 5 minutes
of nonuse
3751 Electronic Height Gauge
Cat. No. EDP Description
3751AZ-6/150 12221 Height Gauge, in Case
Accessories and Cables for 3751 Electronic Height Gauge
PT99492* 65650 One 3-Volt Batteries, CR2032v
947* 56756 Wood Case Only
* Not Stocked
27
3752 Electronic Height
Gauges
The 3752 Electronic Height Gauge is a full featured, versatile and
economic solution for most height measurement applications.
All measuring information from these tools can be entered directly
into Starrett Data Collection Systems for analysis, data collection
and hard copy documentation. They are available in 0-300mm /
0-12" and 0-600mm / 0-24" ranges.
Readability and Control Features
• Clear bar graduations in 5mm and .100" increments
• Large 9.65mm / .380", easy-to-read LCD display reads to
0.01mm / .0005"
• Instant millimetre/inch conversion
• Carrier and scriber designed to read from zero
• "Hold" control feature retains a reading at any position
• Plus or minus indication allows reading in proper direction
• Ability to set zero at any position
• Manual on/off plus a built-in automatic off after 30 minutes
of nonuse
Full Function Action Features
• Large positive action keypad
• Ability to retain and return to the true zero reading of the
height gauge
• PRESET button to install any reading at any position
• Ability to install minimum and maximum limits
• RS232 data output port
Battery Life
• 1-1/2+ years battery life. Two 3-volt batteries furnished
(CR2450)
3752-24/600
Both Height Gauges shown with
optional Auxilliary Circular Carbide
Scriber, PT28131. Gauges are
furnished with Auxilliary Straight
Carbide Scriber, PT22357.
3752-12/300
28
On/Off Button
(auto off after 30
minutes of nonuse)
Hold Button
retains current
reading at any position
± Button
Toggles polarity or
direction change
Primary: ZERO/ABS
Toggles Zero at current
position or absolute
Secondary:
PRESET Button
install any reading at
any position
Primary: mm/in
Toggles metric or
inch readout
Secondary: LIMITS
min/max tolerance
specifications at
any position
Shift Set Button
Toggles between
Primary & Secondary
Functions
3752 Electronic Height Gauges
Range Description Cat. No. EDP
0-300mm/0-12" Height Gauge without Case 3752-12/300 68815
0-600mm/0-24" 3752-24/600 68816
Cables, Accessories, Cases for 3752 Electronic Height Gauges
Description Cat. No. EDP
Shielded Cable to Starrett 761/772
Series Modules, PT61768 Adaptor PT22938* 64059
Interface Adaptor for Starrett Tools to PC PT61768* 66454
* Not Stocked
Simple yet powerful
gauge controls
Specifications for 3752 Electronic Height Gauges
Resolution 0.01mm / .0005"
Graduations 5mm / .100"
Overall .04mm / ±.0015" 0-450mm / 0-18" Accuracy
.05mm / ±.002" 450-600mm / 18-24"
Battery Life Over 1-1/2 Years Average Use
29
Features
• A unique, ergonomically shaped
base, hardened and ground, that fits
your grip just right to easily move the
gauge and press the hot key
• Hot key allows you to select
measuring results on the fly
• 0-24" Measuring Range
• Smart probe that can measure I.D. or
O.D. without attachments
• Electronically adjusted probe force
• Large, easy-to-read interactive LCD
with unique scanning metre for
monitoring probe position
• Electronically adjustable beeper
volume
• Bold screen icons indicate the current
routine
• Three electronically adjustable
resolutions
• Retains the last calibrated diameter of
the measuring probe, even after the
gauge is shut down
• Dynamic bi-directional probing with
point and scan modes
• Easy operation with speed wheel,
which also has fine-adjust feature
• Locking mechanism for scribing
• Five measurement modes: (ID/OD,
Centre, TIR, Max/Min, Continuous
Display)
• Instant inch/millimetre conversion
• Two selectable Datums and Preset
• Auto Power Off after two hours with
retention of probe calibration
• Automatic calculation of eight
measurement routines:
- Centre
- Diameter
- Height
- Max
- Min
- TIR
- Distance to last feature
- Distance between last two points
• Rechargeable NiMH batteries with 100
hours of continuous life
• Seven setup functions:
- Probe Calibration (2)
- Beeper Volume
- Display Resolution
- Probe Force Adjustment
- Printer On/Off
- Force Calibration
• Optional probe kit features a variety of
probes for many applications
• Gauges include carbide probe, probe
holder and probe calibration block
• RS232 data output port
• Starrett capacitive measurement
system ensures the accuracy and
reliability you expect
• Excellent value – loaded with features
and competitively priced
2000 Altissimo® Electronic Height Gauge
0-24" / 600mm
Altissimo® Electronic Height Gauges are innovative, easy-to-use, and loaded with
Starrett-exclusive functions for easy-to-program measuring routines that run smoothly
and reliably.
Hot Key
Specifications:
Measuring Range 600mm/24" (Extendible to 30"/750mm by rotating the probe holder 180º)
Resolution .002mm/.01mm/.02mm ( .0001"/.0005"/.001")
Accuracy ±.008mm (±.0003")
Repeatability ±.002mm (±.0002")
Power Source NiMH Rechargeable Batteries (120V AC/60Hz Charger/Adaptor included). Operation
time: 100+ hours, Recharging time: 10 hours
Included 4.8mm (.1875") Dia. Carbide Probe, Probe Holder
Accessories AC Charger/Adaptor, Probe Calibration Block
Dimensions Length 279mm (11"), Width 197mm ( 7-3/4"), Height 927mm (36-1/2")
Weight 18 kg (40 lb)
Perpendicularity 0.010mm ( .0004")
30
Altissimo® Electronic Height Gauges with Standard Components
Description Cat. No. EDP
Height Gauge 2000-24* 67008
Carbide Probe 4.8mm (.1875") Dia. (Standard) PT27937* 67009
Probe Holder (Standard) PT27940* 67010
Probe Calibration Block (Standard) PT27944* 67011
Accessories for Altissimo® Electronic
Accessory Set Includes: S2000AZ* 66997
Probe Tip, 5-Way Adaptor PT27948* 67012
1mm (.040") Carbide Contact Point PT23942* 65255
2mm (.078") Carbide Contact Point PT23914* 64222
3mm (.120") Carbide Contact Point PT23943* 65256
Contact Wrench PT27952* 67013
10.2mm (.400") Cylindrical Probe PT27945* 67014
Circular Carbide Scriber PT27950* 67015
Depth Gauge Attachment PT27949* 67016
Holder for Dovetail Indicators PT27946* 67017
Replacement Battery Pack, NiMH 6V PT62011* 67018
Power Supply Charger for United Kingdom Configuration PT62130* 67003
Power Supply Charger for European Configuration PT62131* 67004
Shielded Cable to Starrett 761/772 Series Starrett Modules and PT61768 Adaptor PT62103* 67019
* Not Stocked
Optional Circular Carbide Scriber, PT27950
Holder for Dovetail
Indicators, PT27946
Depth Gauge Attachment, PT27949
Probe Tip 5-Way
Adaptor, PT27948
.400" (10.2mm)
Cylindrical Probe
PT27945
.078" (2mm)
Carbide Contact Point,
PT23914
.120” (3mm) Carbide Contact
Point, PT23943
.040” (1mm) Carbide Contact
Point, PT23942
Contact Wrench, PT27952
31
3259 Dial & Digital Height
Gauges
Accurate, Easy & Economical
Starrett 3259 Height Gauges combine a large dial indicator with
two dual direction mechanical digital counters that register travel
in both directions.
Zero can be set anywhere within the range of travel.
Features & Specifications
• Large knob for coarse and fine adjustment
• Dual stainless steel beams
• Zero/reset button located on the digital counter
• Carbide tipped scriber and clamp
• Locking lever
• Hardened and ground base lapped for flatness
• Accuracies:
0-200mm: ±0.025mm
>200-300mm: ±0.04mm
>300-600mm: ±0.05mm
3259 Dial & Digital Height Gauges & Accessory
Description Range Cat. No. EDP
Dial Height Gauge 0-300mm 3259M-300 12570
w/directional digital counters 0-600mm 3259M-600 12580
Holder for indicator attachments 3259-AC 69909
32
Hole and Slot Gauges
33
Small Hole Gauges
Features:
• Hardened-ball measuring surface with two-point contact
• Radius on each gauge is less than the minimum diameter to be measured,
which provides the two-point contact necessary for maximum accuracy
• Smooth, sensitive adjustment for better feel, giving more accurate
measurements
• The adjustment of the gauge beyond maximum range is restricted by a safety
stop that prevents breakage
Accurate measurements are obtained by slightly “rocking” these gauges in the hole
to be measured. This will guarantee contact at the true diameter. The final size is then
obtained by measuring over the ball contacts with a micrometer.
829 Small Hole Gauge Set
Description Cat. No. EDP
Set of 4 in Case:
829A: 3.2-5.1mm, 75mm long
829B: 5.1-7.6mm, 80mm long
829C: 7.6-10.2mm, 85mm long
829D: 10.2-12.7mm, 90mm long
S829EZ 53074
831 Small Hole Gauge Set
Set of 4 in Case:
831A: 3.2-5.1mm, 70mm long
831B: 5.1-7.6mm, 80mm long
831C: 7.6-10.2mm, 85mm long
831D: 10.2-12.7mm, 90mm long
S831EZ 53087
Small Hole Gauges
3.2-12.7mm
829 small hole gauges are full-ball gauges
used for general work.
831 small hole gauges have a half-ball
gauging surface with a flat bottom. This
permits use in even the most shallow
holes, slots, and recesses.
34
579 self-centering
telescoping
gauges with two
telescoping arms
8-150mm
• Two telescoping contacts
• Handles are rigidly attached to
the contact plungers and are
automatically self-centreing
• Constant spring tension gives uniform
contact pressure
• Both plungers are easily locked at any
desired setting
579 Telescoping Gauge Sets
Description Cat. No. EDP
Set of 4 in Case:
579A: 8-13mm, 60mm long
579B: 13-19mm, 60mm long
579C: 19-32mm, 60mm long
579D: 32-54mm, 60mm long
S579GZ 52616
Set of 6 in Case:
579A: 8-13mm, 60mm long
579B: 13-19mm, 60mm long
579C: 19-32mm, 60mm long
579D: 32-54mm, 60mm long
579E: 54-89mm, 60mm long
579F: 89-150mm, 82mm long
S579HZ 52617
35
3089 Dial Bore
Gauges
Starrett 3089 Dial Bore Gauges offer
precision, a full compliment of features and
excellent value.
Features
• Non-slip insulating grip
• Carbide contacts for extended wear
• Aluminum case with gauge and
accessory cutouts
• Gauge chart for quick and easy anvil
selection
• 2-point contact
• 0.01mm graduations
3089 Dial Bore Gauges
Range Probe Depth Contacts Spacers Extension Cat. No. EDP
6-10mm 40mm 8 - - 3089M-181-10J 12199
10-18mm 100mm 9 0.5 - 3089M-181-18J 12200
18-35mm 125mm 9 0.5 & 1mm - 3089M-181-35J 12201
35-50mm 150mm 4 0.5, 1, 2 & 3mm - 3089M-181-50J 12202
50-160mm 150mm 12 0.5, 1, 2, 3 & 6mm - 3089M-181-160J 12203
160-250mm 400mm 5 - 55mm 3089M-181-250J 12204
250-450mm 400mm 5 0.5, 1, 2, 3 & 6mm 50 & 100mm 3089M-181-450J 12205
18-160mm 125-150mm 9, 4, 12 - 50mm S3089MZ-181-160J 13015
36
Dial and Electronic
Indicators
Gauges
37
AGD Group 2
2900 Electronic
Indicators
Innovative, Full Featured & Tough
2900 Electronic Indicators are available in
a choice of configurations to meet a range
of requirements. Innovative True Absolute
Sensor Technology minimizes the chance
of data loss for exceptional reliability.
Built with IP67 protection and customary
Starrett quality, they maintain their
reliability in hostile shop environments.
Features
• True Absolute Sensor Technology –
remembers position and zero set point
even during battery replacement.
Cannot be “over-sped” into failure.
• Intuitive design and layout – easy to
learn and use
• Positive, tactile-feel button activation
• IP67 protection against dirt, dust
water and coolant to withstand hostile
shop environments
• Long battery life
• External power supply not required
• CE compliant
• Data output on all models
• Choice of Basic, Standard and
Advanced feature levels
• One micron resolution available
• Selectable resolution models available
• Variable ratio measurement systems
available
2900 Electronic Indicators & Accessories
Description Resolution Range Cat. No. EDP
3-button Basic Metric indicator .001mm 12mm 2900-1M 09986
6-button Standard Metric indicator with Selectable Resolution .01mm /.001mm 12mm 2900-4M 09988
6-button Advanced Metric indicator with Selectable Resolution .01mm /.001mm 12mm 2900-6M 09990
Two CR2032 batteries PT99492 65650
Features by Model 3-Button Basic 6-Button Standard 6-Button Advanced
Origin Set, Zero Set x x x
Counting Direction Switching (+/-) x x x
Power ON/OFF x x x
Inch/mm conversion (n/a Metric only) x x x
Data Output x x x
Limit Set x x
Value Preset x x
Reading Hold x x
Selectable Resolutions (as indicated) x x
Feature Lock x x
Max/Min/Runout Value Holding x
2900-6M
38
3600 Indicator
Range Resolution Cat. No. EDP
12.7mm 0.01mm 3600M-5 68918
AGD Group 2
3600 Electronic
Indicators
Ranges up to 12.7mm
3600 Electronic Indicators have simple,
powerful, easy-to-use functions, all at an
attractive price. Versions are available for
inch/metric and metric only.
Features
• Large, easy-to-read LCD
• Range: 12.7mm / .500"
• Resolution: .01mm / .0005"
• Power On / Off button
• Reverse travel (± control indicates
direction)
• Zero setting at any position
• Long battery life
• 8mm diameter stem
• M2.5 X .45 thread
• Lug-on-centre back with additional flat
back
• Dust cap
• Plastic storage case with clear cover
39
3808 & 3809 Dial Indicators
Cat No. EDP Range Grad. Dial Reading
3808MA 12332 0.2mm 0.002mm 0-100-0
3808MAC* 12304 0.2mm 0.002mm 0-100-0
3809MA 12334 0.8mm 0.01mm 0-40-0
3809MAC* 12307 0.8mm 0.01mm 0-40-0
* Includes two additional contacts and wrench, swivel post snug with dovetail indicator clamp,
and tool post holder.
3025 & 3081 Dial Indicators
Cat No. EDP Range Grad. Dial Reading
3025-257J 66601 1mm 0.001mm 0-200
3025-481 61961 10mm 0.01mm 0-100
3025-481/5 66296 5mm 0.01mm 0-100
3025-681 12314 20mm 0.01mm 0-100
3081-481/5 66504 5mm 0.01mm 0-100
3025-481
3025-257J
3025 & 3081 Dial Indicators
• Tolerance hands and bezel lock
• Long life jewel bearings
• Lug-on-centre back
3808 & 3809 Dial Indicators
• Precision gear-driven design
• Reversible contact point direction
• Multiple dovetail locations
• Include dovetail clamps for 4mm & 9.5mm post
• Additional accessories included with 3808MAC &
38009MAC indicators:
3809MAC
Tool Post Holder
1mm Ball Contact
2mm Ball Contact
Contact Point
Wrench
Dovetail Clamp
with 9.5mm Post
Dovetail Clamp
with 4mm Post
Swivel Post Snug
with Dovetail
Indicator Clamp
40
196 Universal Back Plunger Dial Indicators (6.3mm Shank Diameter)
Grad. Range Dial Reading Description Cat No. EDP
0.02mm 5mm
0-100
Yellow Dial Face
Indicator with 3 Contact Points, Adaptor, 4 Attachments*** in Case 196MA1Z 65251
Indicator with 3 Contact Points and Adaptor Only 196MB1 65252
0-50-0
Yellow Dial Face
Indicator with 3 Contact Points, Adaptor 196R, 4 Attachments*** in Case 196MA5Z 65253
Indicator with 3 Contact Points and Adaptor Only 196MB5 65254
*** Attachments include clamp, tool post holder, snug and hole attachment.
Contact Points and Adaptors Only for 196 Universal Back Plunger Dial
Indicators
Description Cat./Part No. EDP
Adaptor** 196R* 50711
Adaptor (Metric Threads) 196MR* 67457
Hardened Steel Contact Point
PT05471* 70617
PT05472* 70618
PT05473* 70619
* Not Stocked
** For Contact Points with #4-48 Thread, see AGD Contact Listings.
196R, 196MR PT05471
PT05472 PT05473
196M Universal Back Plunger
Dial Indicators
5mm
• Accurate and reliable
• Simple to operate
• Rugged, with few moving parts
• Smooth in operation
• 0.02mm graduations
• 6.3mm shank diameter
For full use, the operator first chooses the proper contact from
the three hardened contact points that come with each model.
The contact should then be brought against the work with enough
pressure to give the hand one full turn. Set the hand at zero by
rotating the dial with the knurled bezel. This provides one full
rotation of the hand both to the right and left of zero, showing a rise
or drop in the work and the amount of that variation.
196MB1
41
653 Cast Iron Dial Gauge Stand
Graduation Cat. No. EDP
Gauge Stand with Cast Iron Base, without Indicator 653 55917
653 Dial Gauge Stands
with Cast iron base
These bench-type comparator stands are ruggedly built for
in-process and final inspection work.
The dial indicator can be adjusted vertically and locked in any
position. A sliding ring with locking screw below the beam
permits swinging the indicator to either side. The ring also
acts as a safety device, preventing the beam from accidentally
dropping. There is a fine adjustment on the beam for final
indicator setting.
The hand lifting lever on the indicator raises the spindle and
releases it to contact the work. Left hand lever furnished unless
otherwise specified.
Maximum vertical capacity of 235mm and a throat depth
of 125mm and a vertical indicator fine adjustment of up to
12.7mm. Post diameter is 38.1mm.
653 has a precision ground cast iron base measuring
approximately 200 x 225mm.
660 Magnetic Base Indicator
Holder
with triple jointed arm
The compact and versatile 660 magnetic base indicator holder
has three adjustable pivots controlled by a single knob for fast,
easy indicator positioning.
• Small but powerful magnetic base with 320N holding
force
• Positive On/Off switch
• Base Dimensions: 30mm x 40mm x 35mm
• Horizontal and vertical mounting positions
• Will hold any indicator with a 9.5mm stem or standard
dovetail mount
• Articulating arm with powerful central locking knob,
provides full 360º horizontal positioning and over 180º
vertical positioning
• Maximum Horizontal Reach: 120mm; Maximum Vertical
Reach: 190mm
• Very sensitive fine-adjustment thumb screw
660 Magnetic Base Indicator Holder
Description Cat. No. EDP
Base Indicator Holder 660 68621
42
661 Mini Magnetic Indicator
Holder
The Starrett Mini Magnetic Tool Holder is a simple, versatile,
effective and economical tool for a variety of indicator holding
tasks. It has no levers or switches – simply place the holder
on the measuring surface, attach the indicator and position as
required.
Features & Specifications
• 133N holding force
• Base Diameter: 30mm
• Base Height: 25.4mm
• Overall Height 106mm
• Holds indicators with 9.5mm stems or standard dovetail
mounts
• Fits over spindles and posts with diameter of 6.3mm,
such as the Starrett 196 Dial Indicator
• Includes an 8mm adapter
661 Mini Magnetic Indicator Holder
Description Cat. No. EDP
Indicator Holder 661 68620
3657 Magnetic Indicator
Holders
• Accommodates all Starrett test, back-plunger, AGD, dial
and minature-dial indicators as well as similar indicators
from other manufacturers
• Fine adjustment
• Positive On/Off switch
Cat No. EDP Description
3657AA 68849 Magnetic Base with attachments: Upright Base
Post, Snug, Rod, Indicator Attachment
3657MTW 12696 Magnetc Base Flex O Post Indicator Holder
3657AA
3657MTW
43
Portable Dial Thickness Gauges, Millimetre Reading
Throat Depth Range Graduation Dial Reading Dial Indicator Model No. Cat. No. EDP
100mm 10mm 0.01mm 0-100 1015MA-481J 1015MA-100 67647
66mm - 3015MA 11661
1015M Portable Dial
Thickness Gauges
0-25mm
After inserting work between the measuring contacts, releasing
the lever will cause the spindle to contact the work, giving
an accurate size reading because measuring pressure is
independent of the user. Indicators have jewel bearings and
continuous dials. (Models with balanced dials, other graduations
and ranges are also available on special order. Electronic
indicators can also be supplied.) The contact edges are radiused
to prevent the work from being marred or deflected. The flat
contact area measures 6.3mm in diameter and is 0.125mm
thick. Special contact sizes and shapes are available by request.
3015MA Portable Dial
Thickness Gauge
• Precision ground contacts
• Jeweled bearings
• Ergonomic grip
44
1175M Dial Indicator Groove
Gauges
9.5-150mm
This lightweight gauge is used for in-process or bench inspection
of oil grooves, snap ring retainer grooves, “O” ring seat retainer
grooves and similar internal recesses. It is also useful for checking
bore dimensions and testing for taper, bell-mouth and out-of-
roundness.
The movable, sensitive gauging contact has a 12.7mm retractable
range and transfers the measurement through a linear, friction-
free transfer mechanism to the dial indicator. The lower reference
jaw is fixed and supports the entire weight of the gauge and the
operator’s hands, thus preventing incorrect gauging pressure and
false readings.
The reference jaw can be mounted in two positions on the range
adjusting bar. The bar itself is also adjustable for greater or lesser
range. A fine adjustment screw and a lock are also provided.
Features:
• Supplied with two sets of jaws, both readily interchangeable
• Three sets of contacts are furnished that can be attached
to the ends of the jaws without replacing the entire jaw.
Contacts have flush ends so that grooves at the bottom of
blind holes can be gauged. The contacts are hardened steel
with a hard chrome finish for long life
• Gauge can be set with gauge blocks or other methods such
as micrometers, vernier calipers and ring gauges
• Furnished with storage case
32mm
MAX. Gauging DEPTH
76.2mm
GROOVE I.D.
UPPER
JAW
PT30916
LOWER
JAW
PT30914
CONTACT MOUNTING
SCREW 08272-0
WILL
ENTER
9.5mm
MIN.
BORE
0.61mm
2.54mm
STYLE 1-10
64mm
MAX. Gauging DEPTH
MAX.
GROOVE I.D.
LOWER
JAW
PT30913
WILL
ENTER
MIN.
BORE
CONTACT
MOUNTING SCREW
PT03497
B
A
UPPER JAW
PT30915
STYLES 2-10, 2-20
1175 Dial Indicator Groove Gauge Contact Sets
Contact Set Upper Part No. Upper Part EDP Lower Part No. Lower Part EDP
Will Enter
Minimum Bore
Maximum
Groove I.D.
Minimum
Groove Depth
Minimum
Groove Width
Style 1-10 PT30917* 71745 PT30917* 71745 9.5mm 75mm 2.5mm 0.6mm
Style 2-10 PT30918* 71746 PT30919* 71747 17.5mm 125mm 3.6mm 0.8mm
Style 2-20 PT30920* 71748 PT30921* 71749 25mm 150mm 6.7mm 1.3mm
1175 Dial Indicator Groove Gauges
Range
Dial Indicator
Cat. No. EDPModel No. Graduation Reading Range
9.5-150mm 81-181-1175 0.01mm ±100 2.5mm 1175MZ 65032
45
696 Crankshaft
Distortion Dial/
Strain Gauge
61–458mm
Ideal gauge for checking bearing alignment
or shaft deflection without dismantling
the engine. Also useful as a strain gauge
on engine frames. This inside measuring
gauge checks the distortion of crankshaft
webs and bears a direct relation to existing
misalignment or excessive bearing wear.
Used on all diesel engine shafts and centre
crankshafts on any type of engine or
compressor, the gauge can also be applied
as a strain gauge on engine frames while
the engine is operating. A comparison of
readings taken at top and bottom positions
indicates any misalignment of cylinder and
frame which results in local over-stress
and eventual cracking of the frame neck.
With a special spring tension in the dial
indicator, the gauge is self-sustaining in
any position without sacrificing necessary
rigidity, leaving the operator’s hands free.
Hardened and ground to a sharp point,
conical contact points have an approximate
60º included angle, and will stay in place
on 45º surfaces.
696M Crankshaft Distortion Dial/Strain Gauges
Range
Dial Indicator
Description Cat. No. EDPGraduation Dial Reading Range One Rev.
61-458mm 0.02mm 0-50-0 1mm Millimetre Strain Gauge with Balancing Attachment 696MZ 52902
Gauge furnished with 10 rods, sharp points and balancing attachment in attractive, protective case.
696B Balancing Attachment
696B Balancing Attachment is furnished
with the gauge. For certain applications,
like turning the crank under test with
the gauge in place, the attachment can
be adjusted to maintain the face of the
indicator upward or in desired position. To
install on a strain gauge in use, remove the
knurled clamping nut, then the doweled
plate or end strap at either end by the
screw. The unit is then positioned over the
hubs on two sides of the indicator head.
A spring plunger provides the friction that
holds the balance in proper relation to
position. The parts are nickel plated.
The dial indicator movement is
approximately 4mm and with rods and
extension, provides a range from 61-
458mm. There are 10 rods and one
extension furnished. Rods are marked to
designate the approximate overall length of
the gauge. Indicator has a movable bezel to
adjust the dial in relation to the hand and a
non-breakable crystal.
Designed in collaboration with Hartford
Steam Boiler Inspection and Insurance
Company. It was known as the Hartford
Steam Boiler Engine Strain Gauge and
is used by their inspectors to check the
distortion of engine shafts and frames.
46
CYLINDER
DRAIN PIPE
ENGINE
FRAME
MISALIGNMENT OF CYLINDER AND ENGINE FRAME (SHOWN
EXAGGERATED FOR PURPOSES OF ILLUSTRATION).
STRAIN GAUGE
STRAIN GAUGE
OIL PIPE
A
B
DISTORTION OF FLANGE
FROM MISALIGNMENT.
FIG. 3
TO DETERMINE ALIGNMENT, SET THE
STRAIN GAUGE SO THAT IT JUST CLEARS
CONNECTING ROD.
TURN ENGINE UNTIL
CONNECTING ROD NEARLY
TOUCHES STRAIN GAUGE ROD
ON OTHER SIDE AND TAKE A
READING AT EACH QUARTER.
FIG. 2
FIG. 1
STRAIN GAUGE APPLIED TO CRANK OF DIESEL
ENGINE TO DETERMINE IMPROPER ALIGNMENT.
STRAIN GAUGE
C-CLAMP ON RIB
CRACK FROM
UNSYMMETRICAL STRAIN
STRAIN GAUGE APPLIED TO ENGINE FRAME (WHILE OPERATING),
DIFFERENCE BETWEEN TOP AND BOTTOM READINGS OF THE STRAIN
GAUGE INDICATES IMPROPER ALIGNMENT, CAUSING CRACKS.
FIG. 4
47
649 Spindle Square™
The Starrett 649 Spindle Square offers accuracy, convenience and
significant time saving with the common shop task of tramming
the head of a vertical milling machine. This must be done regularly
to ensure squarness and perpendicularity between the spindle and
work surface.
The spindle square is easier to use and more precise than the
traditional method of tramming with a dial test indicator.
Using the Spindle Square
After setting the spindle square indicators to “0” on a surface
plate, place the Spindle Square into the collet of the milling
machine and bring the head down to the table until both indicator
needles have rotated approximately one full rotation.
The needles do not need to point in the same direction. Identical
numerical readings, not the needle positions, indicate squareness.
To tram the milling machine, adjust the machine per normal
procedures until both indicators read the same numerical value.
After setting the X-axis, repeat the same procedure with the
Y-axis.
Features & Specifications
• Fully assembled with two AGD Group 2 dial indicators
• Patented design
• Solid steel body construction with durable black oxide finish
• Ground gauging surface
• Approximately 1.8kg with custom case
• 9.5mm shank diameter
• 100mm between contact points
• Approximately 172mm wide and 140mm from the top of
shank to the end of the contact points
649 Spindle Square
Range Graduation Dial Reading Cat. No. EDP
2.5mm 0.01mm 0-50-0 649-1M 52082
48
Hardness Testers
Surface Testers
49
3814 Analogue Bench
Hardness Tester
The 3814 Hardness Tester provides reliable Rockwell Hardness
values on all types of metal and alloys, hard or soft, and in many
shapes. This reliable bench hardness tester has a high quality
casting, is ergonomically designed for easy operation and is
engineered to ensure accurate results.
It is an ideal basic hardness solution, economically priced to suit
a variety of lab, workshop, toolroom and inspection department
applications. The 3814 conforms to ASTM E-18 standard.
The tester is furnished with a diamond indentor, a 1.6mm (1/16")
ball indentor, three certified test blocks, four test tables – 149mm
(5.87") and 63.5mm (2.5") flat anvils, 15.9mm (5/8") spot anvil
and a standard vee anvil – and an accessory case.
Features
• Ability to handle Rockwell Scales A through H and K
• Stable cast iron construction
• Ideal basic hardness testing for many typical applications
3814 Analogue Bench Hardness Tester
Description Cat. No. EDP
Analogue Hardness Tester 3814* 67754
Hardness Tester Stand PT06145* 72519
Accessories* for 3814 Analogue Bench Hardness Tester
“C" Regular PT05245* 67944
1.6mm (1/16") Ball Unit PT05249* 67948
RA Test Block (Rockwell A Scale 80) PT05069* 67897
RB Test Block (Rockwell B Scale 90) PT05059* 67888
RC Test Block (Rockwell C Scale 63) PT05050* 67879
Master Block Set, Rockwell C Scale PT05272* 67969
* Not Stocked
** Requires bench alteration.
Specifications for 3814 Analogue Bench Hardness Tester
Minor Load 10Kgf
Major Load A: 60Kgf, B: 100Kgf, C: 150Kgf
Test Force Application (Dead weight applies test force)
Test Force Control Hydraulic Dashpot System
Results Display Analogue – Dial Gauge
Throat Depth 168mm (6.6")
Maximum Test Height 169.9mm (6.69") **
Unit Height/Width/Depth 762 x 216 x 508mm (30 x 8.5 x 20")
Unit Weight 121kg (267lb)
50
3815 Twin Analogue Bench
Hardness Tester
Measures Rockwell & Superficial Rockwell Hardness
The Starrett 3815 Twin Analogue Hardness Tester features
state-of-the-art design and rugged construction. It is engineered
to provide highly sensitive, accurate readings and excellent
repeatability in all Rockwell and Superficial Rockwell hardness
scales.
The 3815 is ideal for heat treatment facilities, tool rooms,
workshops, laboratories and inspection labs.
Features
• Direct analogue dial reading
• Advanced design provides Rockwell and Rockwell Superficial
testing
• Easy to operate
• Engineered to provide highly sensitive and accurate readings
• Conforms to ASTM E-18
• Tests Rockwell Scales: A, B, C, D, E, F, G, H, K, L, M
• Tests Superficial Rockwell Scales: HR15N, HR15T, HR30N,
HR30T, HR45N, HR45Ts
• Includes a diamond conical indentor, 1/16" ball indentor, HRC,
HRB, HR15N, HR30N and HR45T test blocks, 5.87” (150mm)
test table, 2.5" (63mm) flat anvil, standard vee anvil,
accessory case and dust cover
• A broad range of test blocks and other hardness tester
accessories are available.
Specifications
Minor Load 10 Kgf
Minor Load – Superficial 3 Kgf
Major Load 60/100/150 Kgf
Major Load – Superficial 15/30/45 Kgf
Test Force Application Dead Weight
Test Force Control Manual
Results Display Dual Scale Dial
Vertical Capacity 15.2mm (6.0")
Throat Depth 14mm (5.5")
Height 66mm (26.0")
Width 46.2mm (18.2")
Depth 23.9mm (9.4")
Weight 113kg (250 lbs)
3815 Twin Analogue Bench Hardness Tester
Description Cat. No. EDP
3815 Bench Hardness Tester, diamond conical and 1.60mm (1/16") ball indentors, HRC, HRB, HR15N, HR30N and HR45T test blocks,
150mm (5.87") test table, 64mm (2.5") flat anvil, standard vee anvil, accessory case and dust cover 3815* 12800
Hardness Tester Stand PT06145* 72519
* Not Stocked
51
3811A Compact Hardness
Tester
The Starrett 3811A is a state of the art, digital portable hardness
tester, designed to test the hardness of large, hard metal parts.
The 3811A combines fast test speeds with ample memory and
output. It performs tests that easily convert to most popular
hardness scales such as Rockwell, Brinell, Vickers and Shore.
This compact hardness tester is loaded with useful functions
usually found only on high priced models.
Features
• Leeb style tester designed for large, hard parts – load the
impact body and place the impact device on your test piece
• Easy to use keypad operation – push the button to begin
testing and obtain reading
• Auto identification of impact device
• Large LCD display with back light
• USB ouput
• Automatic conversions to Rockwell, Brinell, Vickers and Shore
• Automatic mean value as well as Min & Max values
• Uses two AA alkaline batteries with low power indicator
• Memory capacity (100 groups)
• Optional impact devices and special support rings
Specifications
• Accuracy: +/- 0.5% (referred to L=800)
• Repeatability accuracy: +/- 4L units (L=Leeb)
• Measuring range: 200-960 HL
• For steel & cast steel, alloy tool steel, stainless steel, grey
cast iron, spheroidal iron, cast aluminum, brass, bronze,
wrought copper alloy
• Tool steel should be about 25mm (1") thick solid material or larger
• Operating temperature: -15-40° / 5-104°F
• Dimensions: 150 x 74 x 32mm (5.96 x 2.938 x 1.270")
• Weight: 245g (8.6 oz.)
3811A Hardness Tester & Accessories
Cat. No. EDP Description
3811A 69881 Digital portable hardness tester with impact device D, calibrated test block, cleaning brush and carry case
HT-1800-110* 20940 D+15 Impact Device
HT-1800-115* 20941 DL Impact Device
HT-1800-125* 20942 G Impact Device
HT-1800-130* 20943 C Impact Device
HT-1800-120* 20944 DC Impact Device
HT-1800-100* 20945 Replacement D Impact Device
HT-1800-102* 20946 Replacement Cable For All Impact Devices
HT-2500-105* 20947 Replacement Impact Body
HT-1300-01* 20948 Leeb D Test Block
HT-1100G-01* 20949 Leeb G Test Block
* Not Stocked
Includes base instrument, impact device D, calibrated
test block, custom carry case, cleaning brush and
operation manual
52
3805A Electronic
Durometer
The 3805A is a lightweight, ergonomically
designed, reasonably priced durometer
engineered to perform at the highest level
of accuracy.
Capable of measuring hardness in Shore A
values, the most popular scale, the portable
durometer is ideal for fast, convenient
testing of rubber, PVC, leathers, vinyl, acrylic
and other similar materials. Contact is made
with a 35º blunt point, ensuring superior
accuracy.
Features
• Accurate and repetitive deviation of
20-90 HA< ±1 grade
• Resolution of .1HA
• Measuring range of 0-100HA
• Conforms to ASTM D-2240, ISO 7619
standards
• Large, easy-to-read LCD display
• Automatic Off
• Ability to allow averaging and to lock in
peak value
• Weighs only 233 grams (8.2 ounces)
• Compact size of 163 x 65 x 28mm
(6.40 x 2.56 x 1.12")
• 4 AAA batteries, supplied with the
tester
• Supplied with rubber test block RBR-63
3805A Digital Durometer
Description Cat. No. EDP
Durometer, in Fitted Case 3805A 12265
Accessories for 3805A Digital Durometer
Rubber Test Block, Shore A 27-30, Red RBR-30* 68197
Rubber Test Block, Shore A 61-63, Clear RBC-63* 68198
Rubber Test Block, Shore A 90-94, Black RBB-94* 68199
Set of 3 Blocks (1 ea: RBR-30, RBC-63, RBB-94) SRB-3* 68200
* Not Stocked
Inspecting rubber plumbing hose
53
3812 Ultrasonic Thickness
Tester
State-of-the-Art Ultrasonic Gauge
The Starrett 3812 Ultrasonic Thickness Tester is a state-of-the-art
digital ultrasonic thickness gauge packed with features typically
found only on high end models.
It measures the thickness of metallic and non-metallic materials
such as steel, aluminum, titanium, plastics, ceramics, glass and
any other good ultrasonic wave conductor that has parallel top and
bottom surfaces.
This dynamic ultrasonic thickness gauge accurately displays
readings in either inch or millimetre units after a simple calibration
to a known thickness or sound velocity.
Features & Specifications
• 4 digit LCD display with back light
• Upper/Lower limit preset alarm
• Measurement and scanning capabilities
• Adjustable sound velocity
• Extended memory
• 20 memory groups (100 files/group)
• Minimum display unit: 0.01mm (0.001") selectable
• 0.75-300mm (0.030-12.0") measuring range (in steel with
standard probe)
• 1000-9999m/s (3280-32805ft/s) sound velocity range
• 0-50°C / 32-122°F operating temperature
• 5MHz Frequency
• 4Hz update range
• USB output
• Power supply: Two 3V AA alkaline batteries with
approximately 100 hours of life (with the backlight off)
• Power consumption: Working current is less than 3V
• Accuracy: ± (0.5% thickness + .001" / 0.5% thickness +
0.01mm
• Dimensions: 150 x 74 x 33mm (5.90" x 2.91" x 1.30")
• Weight: 245g (8.6oz)
• Includes tester and cables, software, USB cable, couplant gel
and a rugged, form fit carrying case
3812 Ultrasonic Thickness Tester & Accessories
Description Cat. No. EDP
3812 Ultrasonic Thickness Gauge, software, USB cable, couplant gel and carry case 3812 67668
54
SR100 Surface Roughness
Tester
Easy-to-Use & Accurate
With the SR100, you can measure roughness almost anywhere. It
is ideal for checking large components, structures, auditing batch
production prior to shipment and production line process control.
Separates into Two Pieces
The bottom half of the SR100 contains the traverse mechanism
and stylus pickup assembly which is placed on the surface to be
measured. Its wide base ensures stability.
The upper half includes a large LCD display, start button, mode
and parameter buttons, comfortably hand-held for easy operation
and clear viewing.
How it Works
A diamond stylus is drawn across the part. The motorized traverse
mechanism is cam driven to ensure that the correct horizontal
distance is traveled.
Vertical movement of the stylus as it travels across peaks and
valleys is detected by a piezo-electric pickup which converts the
mechanical movement of the stylus into an electric signal.
The electrical signal is digitized and sent to a microprocessor
where the parameters are calculated using standardized
algorithms.
Features
• Large LCD window
• Measures Ra at the touch of a button
• In addition to basic roughness parameters Ra and Rz, also
measures advanced Rp, Rv and Rt parameters
• Five second cycle time
• Result saved until the next measurement is taken
• Switches between inch and metric mode without remeasuring
• Use right out of the box – little or no operator training required
• Automatic shut-off after five minutes of inactivity
• Configured with the most common industrial settings to ensure
correlation between multiple operators (see specifications)
• Simple and reliable calibration routine
• Uses standard off-the-shelf calculator type batteries with a
minimum life of 5,000 measurements
• Includes SR100 two-piece assembly, calibration standard,
batteries, operation guide and a carrying case
SR100 uses an infra-red (IrDA) link between the upper and lower units to
provide remote, cable free operation up to a distance of one metre (40").
Technical Specifications
Gauge range 200µm / 0.008"
Accuracy 5% of reading + 0.1µm / + 4µin
Pick up type Piezoelectric
Gauge force 200mg / .007 oz.
Stylus Diamond, Radius 5µm / 200µin
Cut off value 0.8mm / 0.03" ±15%
Filter 2CR
Traverse length 5mm / 0.2"
Traverse speed 2mm/sec, 0.08"/sec
Display units µm / µin
Battery life 5,000 operations minimum
Parameter results
Ra, Rz, Rv, Rp, Rt
Parameters Range Resolution
Ra: 40µm / 1600µin 0.01µm / 0.4µin
Rz, Rv, Rp, Rt: 199µm / 7800µin 0.1µm / 4µin
Dimensions
Overall dimensions 125 x 80 x 38mm / 4.92 x 3.15x 1.5"
Weight 200gm / 7oz
Component dimensions and condition
Min bore 65mm / 2.6"
Min diameter 25mm / 1.0"
Max temperature 35ºC / 95ºF
Nominal operating conditions
Temperature 20ºC / 68ºF
Humidity 0 to 80% non condensing
Storage conditions
Temperature 0 to 50ºC / 32ºF to 122ºF
Humidity 0 to 80% non condensing
SR100 Surface Roughness Tester & Accessories
Cat. No. EDP Description
SR100 20950
SR100 two-piece surface roughness tester assembly,
calibration standard, batteries, operation guide and a
carrying case
55
SR200 Surface Roughness
Tester
Powerful, Flexible & Accurate
The SR200 is a full featured, powerful and versatile surface
roughness tester. It can be used either freestanding (on
horizontal, vertical or even inverted surfaces) or bench
mounted with fixturing for batch measurement and laboratory
applications. It is battery powered for portability, with an AC
adapter available.
Fast & Flexible
The SR200 can calculate as many as ten parameters
(below) covering a comprehensive range of requirements. Its
electronics provide very fast analysis – results are calculated
and displayed even before the traverse unit returns. This fast
processing, combined with intuitive menu buttons ensures
measurement cycle productivity.
Large Display & Intuitive Operation
The SR200 has a large LCD to display a full menu and
all measurement results – scroll through the menus with
the two control buttons, make your selections, then press
the MEASURE key. All selections are saved for future
measurements with a built-in memory capacity that holds
up to 100 readings. The SR200 includes an RS232 port so all
measurement criteria and results can be exported.
Overview
• Large screen display
• Unique stylus lift mechanism for total flexibility
• Many application specific parameter options
• Comprehensive selection optional accessories and
pickups
• Long traverse length and extended pickup reach
• TalyProfile Lite Windows software included with available
Silver and Gold upgrade options
• Stores up to 100 readings
Technical Specifications
Pickup
Gauge range 300µm/0.012µ"
Resolution 0.01µm/0.04µ
Accuracy 2% of reading + LSD µm
Pickup type Inductive
Gauge force 150-300mg/.005-.01oz.
Diamond stylus Tip radius 5µm/200µ" unless otherwise specified
Instrument
Cut off value 0.25, 0.8, 2.5, 8mm / 0.01, 0.03, 0.3"
Filter 2CR or gaussian (selectable)
Traverse length 0.25-25mm / 0.01-0.98"
Traverse speed 1mm/sec, 0.04"/sec
Display units µm / µin
Data output RS232
Power 9V battery or (optional) power supply
Parameters
Ra, Rz, Rt, Rp, Rmr, Rpc, Rsm, Rz1max, Rsk, Rda
Storage Capacity
100 measurement results
Dimensions
Overall dimensions 127 x 85 x 60mm / 5 x 3.35 x2.4"
Weight 450gm / 1lb
Nominal operating conditions
Temperature 5-40ºC / 41-104ºF
Humidity 0 to 80% non-condensing
Storage conditions
Temperature 0 to 50ºC / 32ºF to 122ºF
Humidity 0 to 80% non-condensing
SR200 Surface Roughness Tester & Accessories
Cat. No. EDP Description
SR200 20951
SR200 display and traverse unit, TalyProfile Lite
software, pickup and diamond stylus, calibration
standard, manual and carrying case
SR-112-1510* 20961 200mm/7.875" Extension Rod with Lead
SR-112-1534* 20962 Reference Standard
SR-112-1517* 20963 Support Stand
SR-112-2693* 20964 Column and Stand
SR-112-1502* 20956 Standard Pickup with 5µm/200µ" Stylus
SR-112-1503* 20957 Standard Pickup with 10µm/400µ” Stylus
SR-112-1504* 20958 Small Bore Pickup
SR-112-1505* 20959 Right Angle Pickup
SR-112-1506* 20960 Recess Pickup
SR-112-3680* 20952 TalyProfile Gold - 2D Analysis Software w/cable
SR-112-3681* 20953 TalyProfile Silver - 2D Analysis Software w/cable
SR-K509-1578* 20954 TalyProfile 2.5m/8' Cable
SR-K509-1820* 20955 TalyProfile 1.5m/5' Cable
SR-112-3530* 20965 Power Adapter UK
SR-112-3532* 20967 Power Adapter 230 Volt EURO
* Not Stocked
56
Unique Stylus Lift Mechanism
The SR200 has a uniquely engineered
stylus lift mechanism which allows
a vertical adjustment of 50mm / 2"
and rotation of the pickup to different
measuring positions, including right
angle or inverted measurements. These
adjustments to the height and position
of the gauge allow areas and features
of a part to be easily measured without
additional complex fixturing. This feature
saves the operator a huge amount of
set up time and allows total flexibility.
Typical applications where the stylus lift
is invaluable include the measurement of
steps, bores, grooves and lands.
Built-in Memory/Storage
The SR200 is truly portable with no PC or
printer cables in the way of measurements
– take it to wherever you need to take
measurements, save up to 100 batch
readings and then download to your PC or
printer at your convenience.
Long Traverse Length and Extended
Pickup Reach
The SR200 can traverse up to
25mm / 1" (or as little as 0.25mm /
0.010") depending on your component.
In addition, the stylus length and pick-up
configuration give a long reach, making it
an ideal instrument for features such as
large and narrow bores.
Comprehensive Range of
Accessories & Pickups
An extensive range of pickups and
accessories are available to suit the varied
measurement needs of our customers.
Standard Pickup
For general surface roughness measurement.
Cat. No. SR-112-1502; EDP 20956
Small Bore Pickup
For general use in small bores, grooves and on
narrow surfaces.
Cat. No. SR-112-1504; EDP 20958
Right Angle Pickup
For measurement at right angles to the direction of
traverse.
Cat. No. SR-112-1505; EDP 20959
Recess Pickup
For recesses to a depth of 5.7mm / 0.23"
Cat. No. SR-112-1506; EDP 20960
Pickups
A range of pick-ups are available to meet a
variety of measurement requirements.
57
TalyProfile Features Lite Silver Gold
Acquisition interface x x x
Multiple file format reports x x x
Graphical display x x x
Desktop publishing templates x x x
Document page viewer x x x
Levelling x x x
Symmetries x x x
Zoom x x x
Distance measurement x x x
Profile curves x x x
Area of a hole / peak x x x
Abbott-Firestone Curve x x x
Mini Documents x x
Save Profile (export data) x x
Basic & 2D file formats x x
Tolerance limits x x
Join Two Profiles x
Resampling x
Form removal x
Retouch profile points x
Filtering by FFT x
Fractal analysis x
R & W Motifs (ISO 12085) x
Rk Calculation of Profiles x
Graphical RK Parameters x
Step height measurement x
Frequency spectrum x
Morphological Envelopes x
Thresholding x
Power spectrum density x
TalyProfile Lite Software
The SR200 includes TalyProfile Lite, Windows software with
powerful analysis features.
After receiving data from the SR200, TalyProfile Lite can
immediately analyze, print, export as a .txt or .csv file, or
save it as a document that can be reopened and used as a
template for future measurements.
Outstanding Graphics
TalyProfile Lite provides clear on screen profile images.
Users can take basic measurements and create a full report
using the software’s detailed analysis options and publishing
capabilities.
In-Depth Analysis
Profiles can be levelled and zoomed to remove unwanted
features or defects from the analysis. Distance measurement
between features and areas of a profile, step height, area of
a hole and peak can all be easily displayed, graphically and
numerically.
Time-saving Templates
A sequence of analysis functions can be saved as a
“template” and applied to future measurements, turning
detailed reporting tasks into routine documents.
Presentation
TalyProfile Lite includes professional presentation capabilities.
Graphs, profiles and results can be arranged and printed
within TalyProfile and also has the flexibility for export to other
presentation software.
Easy Upgrade Path
TalyProfile Lite provides an easy upgrade path to the more
advanced Silver and Gold versions. TalyProfile Silver has all
functions typically used for shopfloor inspection. TalyProfile
Gold includes complete laboratory analysis functions.
58
Squares,
Precision Rules &
Parallels
59
435
Cast Iron Heads:
With reversible lock bolts, scriber, spirit
level in both square head and protractor
head, direct reading double 180º protractor
scale, hardened steel, photo-engraved
blade. Cast iron heads with black wrinkle
finish. Also available with satin chrome
blade and protractor head.
Combination Sets with Square, Centre and Reversible Protractor Head and Blade
Size Graduation Blade
Cast Iron Heads with Black Wrinkle Finish
Cat. No. EDP
300mm mm and 1/2mm Both Sides
Regular
435M-300 66177
600mm 435M-600 66681
300mm & 11-3/40 1/2mm and 32nds One Side; mm and 64ths Reverse Side 435ME-300 51560
600mm & 23-1/2" 435ME-600 51561
Combination Sets with Square, Centre
and Reversible Protractor Head and Blade
60
434 Forged and Hardened Steel
Square and Centre Heads, Cast Iron
Protractor Head:
These superb quality squares have the
same features as the 435 except that the
square heads and centre heads are forged,
hardened steel with smooth, black enamel
finish.
Combination Sets with Square, Centre and Reversible Protractor Head and Blade
Size Graduation Blade
Forged and Hardened Square and Centre Heads, Cast
Iron Protractor Head with Smooth Black Finish
Cat. No. EDP
300mm mm and 1/2mm Both Sides Regular 434M-300 56255
600mm 434M-600 56256
61
Combination Sets with
Square, Centre and Non-
Reversible Protractor Head
and Blade
Cast Iron Heads:
9
With reversible lock bolts, scriber, spirit level in both square head
and protractor head, direct reading double 180º protractor scale,
and hardened steel, photo-engraved blade. Cast iron heads with
black wrinkle finish. Also available with satin chrome blade and
protractor head.
Combination Sets with Square, Centre and Non-reversible Protractor Head and Blade
Size Graduation Blade
Cast Iron Heads with Black Wrinkle Finish
Cat. No. EDP
300mm mm and 1/2mm Both Sides Regular 9M-300 56253
600mm 9M-600 56254
300mm & 11-3/4" 1/2mm and 32nds One Side; mm and 64ths Reverse Side Regular 9ME-300 50047
600mm & 23-1/2" 9ME-600 50048
62
Combination Squares
with Square Head
Cast Iron Heads:
11H
With reversible lock bolt, scriber, spirit level
and hardened steel, photo-engraved blade
with regular or satin chrome finish. Cast iron
head with black wrinkle finish.
Forged and Hardened Steel Heads:
33H
These squares have the same features as the
11 except that the square heads are forged
hardened steel with smooth, black enamel
finish.
11MH-150
33MH-300
150-600mm Combination Squares with Square Head 11MH 33MH
Size Graduation Blade
Cast Iron Heads with Black Wrinkle Finish
Forged and Hardened Steel Heads
with Smooth Black Enamel Finish
Cat. No. EDP Cat. No. EDP
300mm mm and 1/2mm Both Sides Regular 11MH-300 56243 33MH-300 56249
600mm Regular 11MH-600 56245 33MH-600 56251
63
14 Double Steel Squares– mm Both Edges One Side; mm and 1/2mm Reverse Side
Size Graduation Description Cat. No. EDP
50mm mm, 1/2mm With Graduated Blade Only 14MA 56260
Complete with Graduated Narrow Blade and Bevel Blade 14MD 56261
14 Double Steel
Squares with
hardened and
ground head and
blades
50mm
Designed for tool and diemakers, these
fine precision double steel squares have
adjustable blades, ideal for tight fits. A
knurled clamping nut accurately locks the
blades in any position.
Beveled blade is 45º on one end and 30º
on the other.
58mm narrow blade has 32nds and 64ths
graduations. It is 4mm wide over a length
of approximately 41mm and cut away at
one end to a width of 2.4mm.
13 Double Squares
with hardened
blades
100-150mm
These squares are very popular
with machinists, toolmakers, and
patternmakers. The sliding blades are
adjustable making it practical for a wide
variety of uses. The faces of the head are
ground square, and the 150mm size has
a level.
The bevel blade is available, featuring
an octagon angle 45º at one end and a
hexagon angle 60º at the other end, clearly
marked.
Millimetre Reading Double Squares – mm Both Edges One Side; mm and 1/2mm Reverse Side
Size Description Cat. No. EDP
100mm With Graduated Blade Only 13MA 56278
With Graduated and Bevel Blades 13MB 56279
150mm With Graduated Blade Only 13MC 56280
With Graduated and Bevel Blades 13ME 56263
64
3020 Toolmakers’
Grade Stainless
Steel Squares
50-175mm / 2-31/32 - 12-1/32"
• This high quality toolmakers’ square is
not graduated
• Squareness accuracy to 0.005mm
(.0002") for every 150mm (6")
• Hardened, ground and lapped
stainless steel construction on both
the blade and the beam
• Beam is machined at the inner corner
for clearance of burrs or dirt
• Packed one in a plastic case
• 300mm (12") square shipped in box
with fitted foam insert
3020 Toolmakers’ Grade Stainless Steel Squares
Size – Length of Blade* Length of Beam Cat. No. EDP
75mm/3" 50mm/2" 3020M-75 12392
100mm/4" 75mm/3" 3020M-100 12393
150mm/6" 100mm/4" 3020M-150 12394
300mm/12" 175mm/7" 3020M-300 12395
Complete Set of all 4 Squares S3020MZ 12396
*Length of blade from the inner edge of the beam to the end of the blade.
3020 Toolmakers’ Grade Stainless Steel Squares
Beveled type squares Plain type squares
Range Cat. No. EDP Cat. No. EDP
50 x 40mm/2 x 1.6" 60B-50 12339
75 x 50mm/3 x 2" 60B-75 12340 60F-75 12335
100 x 70mm/4 x 2.8" 60B-100 12341 60F-100 12336
150 x 100mm/6 x 4" 60B-150 12342 60F-150 12337
200 x 130mm/8" x 5.2" 60B-200 12343 60F-200 12338
60 Precision Steel
Squares
50-200mm / 2-8"
• Hardened, ground and lapped
stainless steel blade
• Accuracy: 0.005mm per 150mm
65
Millimetre Graduation Styles
30
First Edge: None
Second Edge: 1/2mm
Fourth Edge: 1/2mm
Third Edge: mm
35
First Edge: mm
Second Edge: 1/2mm
Fourth Edge: mm
Third Edge: 1/2mm
NOTE: All rules under 25mm in width have single row of millimetre figures. Rules 25mm and wider have
double row of millimetre figures, and each edge represents the bottom edge reading left to right.
Reads both left-to-
right and right-
to-left. A Starrett
original feature.
Millimetre and Inch
Graduation Styles
36*
First Edge: 32nds
Second Edge: 1/2mm
Fourth Edge: mm
Third Edge: 64ths
36* Style graduated as follows:
• 150mm end-to-end on mm edges and to 5-3/4" with a blank end on the inch edges
• 300mm end-to-end on mm edges and to 11-3/4" with a blank end on the inch edges
• 500mm end-to-end on mm edges and to 19-1/2" with a blank end on the inch edges
• 1000mm end-to-end on mm edges and to 39-1/4" with a blank end on the inch edges
NOTE: * Millimetre/Inch scale with emphasis on millimetre. Overall length is
150mm (5.905"). Inch graduations stop at 5-3/4" to avoid confusion.
66
Steel Rules with Millimetre
Graduations
150-1000mm
All rules furnished with Starrett satin chrome finish. Additional
sizes and variations available on special order.
Rules include:
• Full-Flexible
• Spring-Tempered
Full-Flexible Steel Rules with Millimetre Graduations
Length Width x Thickness Graduations Cat. No. EDP
150mm 12.7 x 0.4mm 30 – 1/2mm One Side; mm and 1/2mm on Reverse *C330-150 51329
300mm 12.7 x 0.4mm 30 – 1/2mm One Side; mm and 1/2mm on Reverse *C330-300 51330
Spring-Tempered Steel Rules with Millimetre Graduations
150mm 19 x 1.2mm 35 – mm and 1/2mm Both Sides C635-150 52630
300mm 25.4 x 1.2mm 35 – mm and 1/2mm Both Sides C635-300 52631
500mm 29 x 1.2mm 35 – mm and 1/2mm Both Sides C635-500 52632
1000mm 32 x 1.2mm 35 – mm and 1/2mm Both Sides C635-1000 52633
* Indicates rules with single row of millimetre figures (all rules under 25mm width). Rules without asterisk have double row of millimetre figures, and each edge represents the bottom edge
reading left to right (rules 25mm and wider).
Steel Rules with Millimetre
and Inch Graduations
All rules are full millimetre lengths, except where noted. Additional
sizes and variations available on special order.
Rules include:
• Spring-Tempered
Spring-Tempered Steel Rules with Millimetre and Inch Graduations
Length Width x Thickness Graduations Cat. No. EDP
150mm & 5-3/4" 19 x 1.2mm 36 – 32nds and 1/2mm on One Side; 64ths and mm on Reverse C636ME-150 52634
300mm & 11-3/4" 25.4 x 1.2mm 36 – 32nds and 1/2mm on One Side; 64ths and mm on Reverse C636-300 52635
500mm & 19-1/2" 29 x 1.2mm 36 – 32nds and 1/2mm on One Side; 64ths and mm on Reverse C636-500 52636
1000mm & 39-1/4" 32 x 1.2mm 36 – 32nds and 1/2mm on One Side; 64ths and mm on Reverse C636-1000 52637
67
154 Adjustable Parallels
9.5-57mm (3/8 – 2-1/4")
Starrett adjustable parallels provide a wide range of uses in layout,
gauging, inspection work and for setups on various machine tools.
Their adjustable feature makes it possible to adjust them to exact
size by micrometer measurement and also permits use in place of
several solid-type parallels.
These parallels are useful as gauges in checking the size of slots
and openings. They are also convenient for use in machine vises,
for leveling or adjusting work on setups of milling and grinding
machines, shapers, planers, drill presses and for many other
applications.
Parallels slide smoothly and can be easily adjusted. The smaller
sizes A, B, and C, are locked by one screw while the larger sizes,
D, E, and F, have two lock screws. All parallels are 7mm thick.
154 Adjustable Parallel Sets
Length Range Cat. No. EDP
45mm (1-3/4") 9.5-12.7mm (3/8 - 1/2") 154A 50578
55mm (2-1/8") 12.7-17.5mm (1/2 - 11/16") 154B 50579
70mm (2-11/16") 17.5-24mm (11/16 - 15/16") 154C 50580
90mm (3-9/16") 24-33mm (15/16 - 1-5/16") 154D 50581
105mm (4-3/16") 33-44mm (1-5/16 - 1-3/4") 154E 50582
130mm (5-1/16") 44-57mm (1-3/4 - 2-1/4") 154F 50583
Set of 4 Parallels in Case S154SZ 50584
154A: 45mm (1-3/4")
154B: 55mm (2-1/8")
154C: 70mm (2-11/16")
154D: 90mm (3-9/16")
9.5-12.7mm (3/8 - 1/2")
12.7-17.5mm (1/2 - 11/16")
17.5-24mm (11/16 - 15/16")
24-33mm (15/16 - 1-5/16")
Set of 6 Parallels in Case S154LZ 50586
154A: 45mm (1-3/4")
154B: 55mm (2-1/8")
154C: 70mm (2-11/16")
154D: 90mm (3-9/16")
154E: 105mm (4-3/16")
154F: 130mm (5-1/16")
9.5-12.7mm (3/8 - 1/2")
12.7-17.5mm (1/2 - 11/16")
17.5-24mm (11/16 - 15/16")
24-33mm (15/16 - 1-5/16")
33-44mm (1-5/16 - 1-3/4")
44-57mm (1-3/4 - 2-1/4")
Above: Set S154LZ with 154E in foreground
Right: Checking inside measurement of slot
with parallel and outside micrometer
384 Steel Parallels
3 x 25mm - 13 x 31mm
(1/8" x 1" - 1/2" x 1-1/4")
Starrett 384 Steel Parallels are hardened and ground to close
limits. They are indispensable for inspection and layout work
or for various setups on drill presses, milling and grinding
machines, shapers, etc. Furnished in pairs, 150mm / 6"
length, they are made from a special grade of tool steel,
hardened and accurately ground on the four sides. In tool
rooms or machine shops, several pairs of these parallels will
be of great value.
384 Steel Parallel Sets, 150mm Length
Description Cat. No. EDP
Set of 4 Pairs in Case
384A: 3mm x 25mm (1/8" x 1")
384C: 5mm x 22mm (3/16" x 7/8")
384E: 6mm x 19mm (1/4" x 3/4")
384G: 10mm x 13mm (3/8" x 1/2")
S384JZ 51453
Set of 4 Pairs in Case
384N: 6mm x 13mm (1/4" x 1/2")
384M: 6mm x 10mm (1/4" x 3/8")
384P: 6mm x 16mm (1/4" x 5/8")
384F: 6mm x 25mm (1/4" x 1")
S384-1Z 63676
Set of 4 Pairs in Case
384G: 10mm x 13mm (3/8" x 1/2")
384H: 10mm x 19mm (3/8" x 3/4")
384R: 10mm x 25mm (3/8" x 1")
384M: 6mm x 10mm (1/4" x 3/8")
S384-2Z 63677
Set of 5 Pairs in Case
384S: 13mm x 16mm (1/2" x 5/8")
384T: 13mm x 19mm (1/2" x 3/4")
384W: 13mm x 25mm (1/2" x 1")
384X: 13mm x 28mm (1/2" x 1-1/8")
384Y: 13mm x 31mm (1/2" x 1-1/4")
S384-3Z 63678
S384-3Z Parallel Set
68
Fixed Gauges
69
167 Radius or Fillet Gauges
0.5-15mm
Radii or fillets can be checked or laid out easier, faster, and more
accurately with Starrett 167 Radius Gauges.
Many different sets for maximum convenience. Each set is
furnished in an attractive case, providing complete protection and
easy, instant selection of the right gauge size for the job.
Gauge Features
• Made of satin finish stainless steel – rust and stain resistant
• Each gauge is clearly marked with its radius
• Each gauge has five different gauging surfaces for both
convex and concave radii
• All gauges have precision finished radii with extra smooth,
accurate edges
Gauge Holder Features
• Any gauge can be used with the Starrett 110 holder which
is especially useful for checking radii in confined or hard-to-
reach locations
• Two slots are provided in the holder permitting gauges to be
held at 30º or 45º, either square in the slot or tipped to one
side
• The holder is 100mm (4") long, providing good reach and
balance
Left: S167CHZ Radius
Gauge Set with 25
gauges and holder in
case
Above: Gauging radii
using gauge with holder
S167M Radius Gauge Sets – Millimetre
Radii Range Increments Gauges Description Cat. No. EDP
0.5-7mm; 8-15mm 0.5mm; 1mm 22 Sets 167MB and S167MAH Combined, With Holder S167MCHZ 55821
2
Fig 2. Checking concave
(internal) radius with arc
up to 180°. Also will check
radius shown in Fig. 1 but
not relationship of sides.
4
Fig 4. Checking convex
(external) radius with arc
of 90° or greater, or radii
with sides as shown which
would interfere with gauge
used as in Fig. 3.
1
Fig 1. Checking concave
(internal) radius with 90°
arc. Also checks if sides
are tangent to radius and
90° to each other.
3
Fig 3. Checking convex
(external) radius with 90°
arc. Also checks if sides
are tangent to radius and
90° to each other.
5
Fig 5. Checking convex
(external) radius with arc
of 180°; also less than
180° if sides of radius
offer no interference.
Five Different Gauging Surfaces – Ideal for Checking Convex and Concave Radii of All Types
70
269 Taper Gauges
2-25mm
• These gauges are for determining
hole sizes in dies and all kinds of
other work
• Read in 0.02mm, made of tempered
steel with a locking device for fixing
any leaf in position for use
270 Taper Gauge
0.3-4mm / .010-.150"
• Very useful tool, especially for bearing
work and for gauging slots
• Made of quality tool steel and
accurately tapered throughout entire
length for quick and convenient
measuring
• 11mm / 7/16" wide by 160mm / 6-1/4"
long
• Can be used as a precision shim
• One side graduated from 0.3mm
to 4mm in one-twentieth of a mm
(0.05mm); the reverse side from
.010" to .150" in thousandths of an
inch
272 Fillet or Radius
Gauges
0.75-13mm
An external and internal radius on each leaf
permits both concave and convex surfaces
to be measured. The leaves are specially
shaped for use in any position at any angle
to measure fillets and radii in corners or
against shoulders. Each leaf is stamped
with the radius size and has an eccentric
mounting for clearance between the leaf
and the case when the gauge is opened.
269 Taper Gauges - 0.02mm Graduation
Range Length Leaves Cat. No. EDP
2-12mm 64mm 10 269MA 56031
12-25mm 70mm 13 269MB 56032
270 Taper Gauge
Description Cat. No. EDP
Taper Gauge, 0.3-4mm range / .010-.150" 270 51292
272 Fillet or Radius Gauges
Range (Concave and Convex) Increments Leaves Cat. No. EDP
0.75-5mm 0.25mm 18 272MA 51297
5.5-13mm 0.5mm 16 272MB 51299
71
Thickness Gauges
0.03-5mm
These gauges are used in automotive,
aviation, diesel and farm equipment
manufacture and service and also in jig,
fixture, gauge and experimental work.
Especially useful in adjusting tappets,
spark plugs, distributor points, checking
bearing clearances and gear play, fitting
pistons, rings and pins and gauging narrow
slots. Made in a wide range of types and
sizes, each having from 6 up to 26 leaves
ranging in thickness from 0.03-5mm,
straight or tapered.
• Leaves made of finest tempered-steel,
carefully finished to correct thickness,
individually tested and marked with
thickness
• Locking device permits securely
locking one or more leaves in position
• Leaves easily removed or replaced
• Rugged, substantial steel case
protects leaves
66MA
173MAT
Millimetre Reading Thickness Gauges with Straight Leaves
Cat. No. EDP No. of Leaves Size Leaves
(Range)
Leaf Thickness (mm)
66MA 55974 20 12.7 x 77mm 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80,
0.85, 0.90, 0.95, 1.0
467M 52465 12.7 x 114mm 0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15, 0.20, 0.30, 1.0, 2.0, 3.0, 5.0
Millimetre Reading Thickness Gauges with Tapered Leaves
173MAT 57087 13 12.7-7 x 77mm 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50
173MCT 57088 12.7-7 x 152mm
173MCT
72
156 & 159
International Metric
Standard Screw
Pitch Gauges
60º Threads
Starrett screw pitch gauges are among
the most useful tools in any mechanics’
tool box. They quickly determine the pitch
of various threads. These gauges consist
of a substantial steel case with a number
of folding leaves at both ends, each leaf
having teeth corresponding to a definite
pitch, marked on each leaf.
Starrett screw pitch gauges are available
in a wide range of sizes with different
numbers of leaves in various pitch ranges
with which to gauge.
International Metric Standard 60º
Threads
Starrett screw pitch gauges feature a
locking device at both ends of the case, so
leaves can be securely locked in position
for use. Leaves on most gauges have a
special narrow design, permitting checking
internal threads in nuts, etc., as well as
external threads.
Screw Pitch Gauges
Cat. No. EDP No. of Leaves TPI Range Threads per 25.4mm/Inch (TPI) Description
156M 50589 28 0.25-2.50mm
0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75,
0.80, 0.85, 0.90, 1, 1.10, 1.20, 1.25, 1.30, 1.40, 1.50, 1.60,
1.70, 1.75, 1.80, 1.90, 2, 2.50
With Locking Device
159M 50591 28 0.5-11.5mm 0.5, 0.75, 1, 1.10, 1.25, 1.5, 1.75, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5,
6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5 With Locking Device and 60º Centre Gauge
156M
159M
73
666 Thickness Gauge or “Feeler” Stock
7.6m Dispenser Cases 0.03-0.35mm
6.1m Cardboard Boxes 0.40-0.50mm
This handy product includes 667 thickness stock, housed in convenient rewindable
dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off
the required length for adjusting tappets, spark plugs, distributor points, checking bearing
clearances and gear play, fitting pistons, rings and pins, gauging narrow slots, etc. This
stock is also useful for shimming in fixturing and die work.
• Handy 7.6m rolls, 12.7mm wide, in a compact, sturdy plastic rewindable dispenser
case. This case handles stock up to 0.35mm only
• Rewind feature permits retracting thinner feeler stock into the case, preventing
damage
• Roll stock in thicknesses of 0.40mm and over is furnished in 6m (nondispensable)
rolls in a cardboard box.
• Made of the finest tempered steel
• Marked every 150mm with a line, thickness in hundredths of a mm
• Case provides the ability to snip off the desired length without any waste
667 Thickness Gauges or “Feeler” Stock
0.03-0.50mm
These gauges are widely used in automotive, aviation, diesel and farm equipment
manufacture and service and also in jig, fixture, gauge and experimental work.
Furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from
0.03-0.50mm
Rounded ends – no ragged edges make stock easier to work with
Made of the finest tempered steel
With convenient 5mm hole punched in the end for hanging
666M Thickness Gauge Rolls – Dispenser Case
Thickness Length Cat. No. EDP
0.03mm
7.6m
666M-3 52823
0.04 mm 666M-4 52824
0.05mm 666M-5 52825
0.06mm 666M-6 52826
0.08mm 666M-8 52827
0.10mm 666M-10 52828
0.15mm 666M-15 52829
0.20mm 666M-20 52830
0.25mm 666M-25 52831
0.30mm 666M-30 52832
0.35mm 666M-35 52833
666M Thickness Gauge Rolls – Cardboard Box
0.40mm
6.1m
666M-40 52834
0.45mm 666M-45 52835
0.50mm 666M-50 52836
667 Thickness Gauges – 300mm
Thickness Cat. No. EDP
0.03mm 667M-3 52869
0.04mm 667M-4 52870
0.05mm 667M-5 52871
0.06mm 667M-6 52872
0.08mm 667M-8 52873
0.10mm 667M-10 52874
0.15mm 667M-15 52875
0.20mm 667M-20 52876
0.25mm 667M-25 52877
0.30mm 667M-30 52878
0.35mm 667M-35 52879
0.40mm 667M-40 52880
0.45mm 667M-45 52881
0.50mm 667M-50 52882
74
Precision Shop Tools
75
98 Machinists’ Levels with ground and graduated vials
Size mm Description Cat. No. EDP
100mm Without Cross Test Vial 98-4 50440
150mm With Cross Test Vial 98-6 50441
200mm With Cross Test Vial 98-8 50442
300mm With Single Plumb Vial and Cross Test Vial 98-12 50443
450mm With Double Plumb Vial and Cross Test Vial 98-18 50445
To guarantee extreme accuracy, the length of your level should not be longer than the work you are leveling.
End view showing involute groove
98 Machinists’
Levels with ground
and graduated vials
100-450mm
These levels have ground and graduated
main vials. All sizes have a cross test vial
except the 100mm model.
The 300mm model also has a plumb vial and
the 450mm size has a double plumb vial.
These vials are adjustable to a positive
setting and are housed in a satin finished
brass tube with a friction-fit closing cover to
prevent breakage.
The base of the levels features an involute
groove running the length of the base, which
provides a reliable seat for round work such
as pipes or shafting.
With the cross test vial, it is possible to
simultaneously level in both directions.
This prevents inaccuracies in the main vial
reading caused by canting the level sidewise
on round work.
The 150-450mm main level vials have
graduations that are approximately 0.42mm
per meter or 80-90 seconds. There are
five, six, or seven lines on each side of the
bubble, depending on the base length.
76
130 Bench Level
85mm
This is a very handy, compact bench level
with a sensitive and accurate single vial.
The body is made of seasoned cast iron
with black wrinkle finish and an accurately
machined base leveling surface.
130 Bench Level
Size Description Cat. No. EDP
85mm With Main Vial 130 50560
Cat No. EDP Size
3097Z 12312 200mm/8"
3097Z Precision
Level
• Main vials have seven graduations
on each side of the bubble with
10-second accuracy
• Auxiliary level vial shows lateral
position and assists in horizontal
setting
• One division on the vial represents
0.02mm/m
• Special alloy iron used to obtain
freedom from thermal effects
• Includes attractive aluminum case
77
827 Edge Finders
10mm Body Diameters
For fast, accurate work location
Work surfaces may be located easily,
quickly and accurately with these edge
finders. Work with flat, straight edges,
shoulders, grooves, round work, studs,
dowels or centre points and scribed lines
– all can be accurately located with this
handy tool. Body and contacts are made
of tool steel, hardened, ground and lapped
to close tolerances for diameter and
concentricity.
How To Use:
Edge finders are easy to use. They are
placed in a collet or chuck. The worktable
is then traversed to obtain contact between
the rotating edge finder and the work.
Contact will shift to concentric position
relative to the body and with very slight
additional table adjustment, will move off
centre with a decided wobble. At this point,
the centre of the finder is exactly one-half
the diameter of the contact from the work
edge, permitting accurate location for other
machining operations relative to the edge.
For locating centre points and scribed
lines, the pointed contact is used by putting
a pencil or rule against the centre point
and making it run concentrically. Then the
point is brought down to the centre point or
intersection of scribed lines and the table
is adjusted so that when the tool barely
touches the work, the lineup with the point
in question can be ascertained.
827 Edge Finders
Description Body Diameter Contact Diameter Cat. No. EDP
Single End 10mm 6mm 827MA 56041
Double End 10mm 6mm and pointed contact 827MB 66452
Furnished in attractive, protective case.
827B with double end
827MA single end
Locating the centre with 827MB
Locating the edge of a part with 827MA
78
73, 79, 83 “Yankee” Spring-
Type Calipers and Dividers
with flat legs and quick-spring
nut
100, 150, 200, 300mm
Starrett “Yankee” Calipers and Dividers are made from a high-
grade steel and well-finished. The legs are made of flat stock and
are very durable. The fulcrum stud is hardened and has a smooth
bearing surface. The bow spring, although flexible, is exceedingly
strong to assure reliability.
The Starrett quick-adjusting automatic-closing spring nut is
designed for making fast, positive adjustments. The threads of
the nut firmly engauge the screw at the slightest pressure from
the leg. When the pressure is withdrawn, the nut automatically
releases itself, sliding freely over the screw. This feature saves
time in opening and closing. 73 “Yankee” Spring-Type Inside Calipers
Size and Approx. Capacity Cat. No. EDP
100mm 73B-4 50335
150mm 73B-6 50337
200mm 73B-8 50339
300mm 73B-12 50343
79 “Yankee” Spring-Type Outside Calipers
100mm 79B-4 50365
150mm 79B-6 50367
200mm 79B-8 50369
300mm 79B-12 50373
83 “Yankee” Spring-Type Dividers
100mm 83B-4 50377
150mm 83B-6 50379
200mm 83B-8 50381
300mm 83B-12 50385
274 Toolmakers’ Spring-Type Inside Calipers
75mm 274-3 51301
150mm 274-6 51303
275 Toolmakers’ Spring-Type Outside Calipers
75mm 275-3 51305
150mm 275-6 51307
274, 275 Toolmakers’ Spring-
Type Calipers with round legs
and solid nut
75, 150mm
Starrett Toolmakers’ Calipers are the finest tools of their type.
Designed for toolmakers and all good mechanics who require finer
adjustment and better balance so a more sensitive “feel” can be
obtained. Precision made to rigid Starrett standards throughout.
The fulcrum stud is hardened and the bearing surfaces of the legs
are large enough to prevent any side deflection. The bow spring is
strong and flexible, and the adjustment is centrally located in the
legs to assure smooth action.
79
Improved Firm-Joint Calipers
26 (Outside)
150-900mm
27 (Inside)
150-600mm
• Improved joint designed for tension adjustment
• Tension will not change with leg movement
• Legs are made from a high-grade steel, are ruggedly
constructed and well-finished
26 Outside Calipers
Size* Cat. No. EDP
150mm 26-6 50186
300mm 26-12 50189
450mm 26-18 50190
600mm 26-24 50191
900mm 26-36 50192
27 Inside Calipers
150mm 27-6 50193
300mm 27-12 50196
450mm 27-18 50197
600mm 27-24 50198
* Actual capacity is one-third greater than the listed size.
162 Pin Vises
Range Cat. No. EDP
0-1mm 162A 50599
0.8-1.6mm 162B 50600
1.3-3.2mm 162C 50601
2.9-4.8mm 162D 50602
Set of All 4 Sizes in Protective Vinyl Case S162Z 50604
162 Pin Vises
0-4.8mm
Starrett pin vises are useful for securely holding small stock, taps,
drills, reamers, scribers, wire, small files, and other tools. The jaws
are hardened and with a few turns of the binding nut, a firm grip
may be obtained. Handles and binding nuts are nickel-plated.
A hole extends through the full length of the handles so that wires
of any length and any diameter up to the full size of the tool can
be held.
The handles of these pin vises are reduced in size so that they
can be rapidly rotated between thumb and finger when filing small
work.
80
93 T-Handle Tap Wrenches
Starrett 93 T-Handle Tap Wrenches are for holding taps, drills,
reamers and other small tools to be turned by hand. They are
properly heat treated to withstand ordinary shop use.
The body is centered, enabling the worker to use it on lathe
centres or on an upright drilling machine to start the tap straight.
The jaws conform to the tool being held, making it rigid and less
apt to loosen.
All wrenches have a sliding handle that is frictionally held. This
feature permits the handle to be removed entirely or positioned so
that leverage can be applied when working in close quarters.
The 93D, E and F sizes are identical in construction to the 93A, B
and C models, except that the bodies are proportionately longer.
These longer tap wrenches are very handy in machine, automobile
service and aviation repair shops because they eliminate the need
for stocking special long taps for depths which cannot be reached
with shorter wrenches.
Note: These tools are designed to hold square shanks. Round
shanks can be gripped, but care must be used. Excessive
tightening may break the binding nut.
70 Pocket Scribers
Carbide or Hardened Steel Points
The handle is of steel, knurled, and nickel plated. The scriber point
is steel, properly hardened or carbide and finely tapered so that
the location of the point is not obscured.
The scriber is held firmly in the handle by a knurled chuck and
when not in use can be reversed, telescoped into the handle, and
locked by the chuck. The hexagon-shaped head prevents rolling.
70 Pocket Scribers
Point Point Length Handle Diameter Cat. No. EDP
Steel 60mm 6.4mm 70A 50323
72mm 9.5mm 70B 50324
Carbide 60mm 6.4mm 70AX 50327
72mm 9.5mm 70BX 56092
93 T-Handle Tap Wrenches
Capacity Body
Length Cat. No. EDPTap Size Square Shank
1.6-4.7mm 1.6-4mm 50 93A 50427
5.5-11mm 4-6.4mm 65 93B 50428
6.4-12.7mm 4.7-8mm 90 93C 50429
1.6-4.7mm 1.6-4mm 150 93D 50430
5.5-11mm 4-6.4mm 250 93E 50431
6.4-12.7mm 4.7-8mm 330 93F 50432
81
18
Rugged automatic punches with all-steel
handles and parts
• Internal mechanism automatically
strikes a blow when downward
pressure is applied
• Adjustable knurled cap regulates the
force of the blow
• Spring tension, which regulates the
blow, is constant so marks made by the
point are uniform in depth and size for
each setting
• All sizes are identical in style, differing
only in the striking power
• The point can be easily removed for
regrinding or replacement
• Heavy-duty 18C is capable of striking
a much heavier blow than the other
sizes
818 Automatic Centre Punch
Length Diameter Cat. No. EDP
125mm 16mm 818 53048
819 Hinge-Locating Automatic Centre Punch
125mm 16mm 819 53049
Automatic Centre Punches with Adjustable Stroke
Easy one-hand precision
centre punching
Automatically locates and
centres holes through hinges,
latches, catches, etc.
Automatic Centre Punches with Adjustable Stroke
Description Length Diameter Cat. No. EDP
Punch 100mm 11mm 18AA 50119
125mm 14mm 18A 50120
Punch, Heavy-Duty 130mm 17mm 18C 56757
Rugged automatic centre
punch with adjustable stroke
818
This punch is similar to our 18C, except
that it has a lightweight, knurled aluminum
handle for a positive grip and easy
handling
• No hammer required! Just hold the
punch in an upright position, press
the handle down, and a built-in
mechanism strikes a perfect centre
mark every time
• The force of the blow can be adjusted
by turning the knurled cap
• All working parts made of properly
hardened tool steel. Hardened tool
steel point may easily be removed for
resharpening or replacement.
• Works on metal, plastics, wood and
other machinable materials
819 Hinge-Locating
This automatic centreing punch combines
all the features of our 818 lightweight
aluminum punch with an exclusive self-
centreing locating sleeve that automatically
centres starter holes for screws
• Simply engauge the beveled edge of
the sleeve with the countersunk hole
in the hinge and press down on the
handle until the built-in mechanism
strikes a blow for truly concentric
starting holes every time. To draw
hinges, etc., sideways, tilt the punch
slightly in the opposite direction.
• Eliminates the risk of drilling off
centre, causing screws to pull hinges
or hardware off centre
• Punch can be adjusted for striking
light or heavy impressions by turning
the knurled cap
• Point is easily removed for
replacement or resharpening
82
248 & B248 Drive Pin Punches
Length Diameter Punch Cat. No. EDP
200mm
3mm 248A 51181
5mm 248B 51182
6mm 248C 51183
8mm 248D 51184
9.5mm 248E 51185
Set of 5, A, B, C, D, E in Protective Vinyl Case S248PC 51186
248 Drive Pin Punches for
machine shop and motor
service work
• Extra-long drive pin punches, measuring 200mm. The bodies are
115mm and the drive pin sections are 90mm long
• Well-proportioned, hardened, properly tempered with a knurled
grip
• Designed to withstand hard use
• Provide a most satisfactory punch for machine shop and
motor service work
• Diameter of punches is slightly less than listed
117 Centre Punches with
Round Shanks
Starrett 117 Centre Punches are made of specially selected steel,
hardened and properly tempered. They are well proportioned,
nicely finished and have a knurled finger grip.
The points are ground at the proper angle to give maximum
service, and the tips are accurately centreed.
117 Punches with Round Shanks
Length Dia. at Top of Tapered Point Cat. No. EDP
75mm 1.5mm 117AA 50482
100mm
2mm 117A 50483
2.5mm 117B 50484
3mm 117C 50485
4mm 117D 50486
125mm 6.5mm 117E 50487
Set of 5, 117AA, A, B, C, D in Plastic Case S117PC 50488
83
565 Drive Pin Punches
Starrett 565 Drive Pin Punches are well proportioned, hardened,
properly tempered, nicely finished, and have a knurled finger grip.
Each punch has the size stamped on the head.
565 Drive Pin Punches
Length Diameter Punch Cat. No. EDP
100mm
1.5mm 565A 52578
2.5mm 565B 52579
3mm 565C 52580
4mm 565D 52581
5mm 565E 52582
5.5mm 565F 52583
6mm 565G 52584
8mm 565H 52585
Set of 8, A, B, C, D, E, F, G, H in Round Red Plastic Box S565WB 52586
Set of 8, A, B, C, D, E, F, G, H in Vinyl Case S565PC 52587
B565 Brass Drive Pin Punches
Length Diameter Punch Cat. No. EDP
100mm
1.5mm B565A 12465
2.5mm B565B 12466
3mm B565C 12467
4mm B565D 12468
5mm B565E 12469
5.5mm B565F 12470
6mm B565G 12471
8mm B565H 12472
Set of 8, A, B, C, D, E, F, G, H in Fabric Pouch SB565Z 12473
B565 Brass Drive Pin Punches
Our regular punches, made of hardened, tempered steel withstand
heavy duty work, but at times are too hard and can damage softer
materials. The new brass punches are ideal for these applications
as they are much softer than the steel version.
The obvious disadvantage of brass punches is the same as their
advantage -they are much softer than hardened steel. Obviously,
the brass is less able to stand up to years of hard use.
Ideally, it is good to have sets of both
types and use the brass punches
only when there is the possibility of
damage to the work piece.
Available in eight individual sizes
from 1.5mm to 8mm and as a
full set of eight in an attractive
pouch.
84
816 Prick Punches
When precise positioning of a point or an intersection of lines is
required, these are the punches to use. The points are carefully
ground to the correct taper, which is sharper than the normal
centre punch.
This allows exact placement of the point, providing sharp
impressions. These punches are properly hardened, tempered,
and nicely finished.
816 Prick Punches
Length Dia. at Top of Tapered Point Cat. No. EDP
100mm
2mm 816A 53043
3mm 816B 53044
4mm 816D 53046
Combination Starrett Punch Set in Plastic Case.
One Each 816A, B, D Prick Punches, and Two
Centre Punches 117AA, B.
S816PC 57078
800 Square-Head Nail Sets
• Round, knurled grip
• Large, square head provides a large striking surface and
prevents the tool from rolling
• Beveled end prevents breakage
• Cupped punch surface to follow nail without sliding off
• Punch diameter clearly marked on the head
• Made of hardened and tempered
steel
800 Square-Head Nail Sets
Length Punch Diameter Cat. No. EDP
100mm
0.8mm 800A 53029
1.5mm 800B 53030
2.5mm 800C 53031
3mm 800D 53032
4mm 800E 53033
Set of 5 in Protective Plastic Case. One
Each of 800A, B, C, D, E S800PC 64131
85
Rectangular Gauge Blocks
One Millimetre Base
Rectangular Steel Gauge Block Sets in Case B89.1.9 Accuracy Grade 0
Measuring Range
Blocks
Per Set Blocks Included In Sets Cat. No. EDP
1.0 Through 61.0mm in 1.0mm Steps
2.0 Through 61.0mm in .5mm Steps
4.0 Through 61.0mm in .25mm Steps
9
3 blocks 1.0mm, 2.0mm, 2.25mm
4 blocks 2.5mm, 3.0mm, 5.0mm, 10.0mm
2 blocks 15.0mm, 25.0mm
RS 9.MA1* 93356
3.0 Through 450mm in .001mm Steps
2.0 Through 450mm in .01mm Steps
1.0 Through 450mm in .1mm Steps
45
9 blocks 1.001mm Through 1.009mm (Steps of .001mm)
9 blocks 1.01mm Through 1.09mm (Steps of .01mm)
9 blocks 1.1mm Through 1.9mm (Steps of .1mm)
9 blocks 1mm Through 9mm (Steps of 1mm)
9 blocks 10mm Through 90mm (Steps of 10mm)
RS 45.MA1* 93059
3.0 Through 450mm in .0005mm Steps
2.0 Through 450mm in .001mm Steps
1.0 Through 450mm in .01mm Steps
1.0 Through 450mm in .1mm Steps
88
1 block .5mm
1 block 1.0005mm
9 blocks 1.001mm Through 1.009mm (Steps of .001mm)
49 blocks 1.01mm Through 1.49mm (Steps of .01mm)
18 blocks 1mm Through 9.5mm (Steps of .5mm)
10 blocks 10mm Through 100mm (Steps of 10mm)
RS 88.MA1* 92872
3.0 Through 250mm in .0005mm Steps
2.0 Through 250mm in .001mm Steps
1.0 Through 250mm in .01mm Steps
1.0 Through 250mm in .1mm Steps
112
1 block .5mm
1 block 1.0005mm
9 blocks 1.001mm Through 1.009mm (Steps of .001mm)
49 blocks 1.01mm Through 1.49mm (Steps of .01mm)
48 blocks 1mm Through 24.5mm (Steps of .5mm)
4 blocks 25mm Through 100mm (Steps of 25mm)
RS 112.MA1* 93060
Micrometer Checking Set B89.1.9 Accuracy Grade AS1
10 10 blocks 2.5mm, 5.1mm, 7.7mm, 10.3mm, 12.9mm 15.0 mm, 17.6mm,
20.2mm, 22.8mm, 25.0mm RS 10.MA* 99753
Rectangular Ceramic Gauge Block Sets in Case
3.0 Through 450mm in .001mm Steps
2.0 Through 450mm in .01mm Steps
1.0 Through 450mm in .1mm Steps
45
9 blocks 1.001mm Through 1.009mm (Steps of .001mm)
9 blocks 1.01mm Through 1.09mm (Steps of .01mm)
9 blocks 1.1mm Through 1.9mm (Steps of .1mm)
9 blocks 1mm Through 9mm (Steps of 1mm)
9 blocks 10mm Through 90mm (Steps of 10mm)
RY 45.MAA* 97634
3.0 Through 450mm in .0005mm Steps
2.0 Through 450mm in .001mm Steps
1.0 Through 450mm in .01mm Steps
1.0 Through 450mm in .1mm Steps
88
1 block .5mm
1 block 1.0005mm
9 blocks 1.001mm Through 1.009mm (Steps of .001mm)
49 blocks 1.01mm Through 1.49mm (Steps of .01mm)
18 blocks 1mm Through 9.5mm (Steps of .5mm)
10 blocks 10mm Through 100mm (Steps of 10mm)
RY 88.MAA* 97081
Sets include etched serial numbers and Commercial Calibration Certificate. Metric croblox® Wear Blocks and/or Master Calibration Certificate are available at extra cost.
* Not Stocked
Tolerances expressed in micrometers (0.001mm)
Webber Grade AA B89.1.9 Grade 00 Webber Grade A1 B89.1.9 Grade 0
Size Tolerance
Variation in Length
Tolerance Flatness Tolerance Size Tolerance
Variation in Length
Tolerance Flatness Tolerance
Thru 0.5mm +.10/-.10 .05 .05 +.14/-.14 .10 .10
Thru 10mm +.07/-.07 .05 .05 +.12/-.12 .10 .10
Thru 25mm +.07/-.07 .05 .05 +.14/-.14 .10 .10
Thru 50mm +.10/-.10 .06 .05 +.20/-.20 .10 .10
Thru 75mm +.12/-.12 .07 Rect (.05), Sq. (.07) +.25/-.25 .12 .10
Thru 100mm +.15/-.15 .07 Rect (.05), Sq. (.07) +.30/-.30 .12 .10
Thru 125mm +.20/-.20 .08 Rect (.05), Sq. (.07) +.40/-.40 .14 .10
Thru 150mm +.20/-.20 .08 Rect (.05), Sq. (.07) +.40/-.40 .14 .10
Thru 175mm +.25/-.25 .09 .10 +.50/-.50 .16 .15
Thru 200mm +.25/-.25 .09 .10 +.50/-.50 .16 .15
Thru 250mm +.30/-.30 .10 .10 +.60/-.60 .16 .15
Thru 300mm +.35/-.35 .10 .10 +.70/-.70 .18 .15
Thru 400mm +.45/-.45 .12 .10 +.90/-.90 .20 .15
Thru 500mm +.50/-.50 .14 .10 +1.1/-1.1 .25 .15
86
3047.0, 3047.1, 3088.0,
3088.1 Precision Gauge
Blocks
• Manufactured from a high grade of steel to ISO 3650
Grade “0” or Grade “1”
• Carefully heat treated and stress relieved for high stability
• Precision lapped for good wringing properties
• Each block is stamped with individual size
• Supplied with a UKAS Calibration Certificate
Cat No. EDP No. of Blocks Description
3047-0 20804 47 Grade "0" 1.005, 1.01 to 1.19 by 0.01mm step,
1.2 to 1.9 by 0.1mm step, 1-10 by 1mm
step,20-100 by 10mm step
3047-1 20805 47 Grade "1"
3088-0 20806 88 Grade "0" 1.0005, 1.001 to1.009 by 0.001mm step,
1.01 to 1.49 by 0.01mm step, 0.5 to 9.5
by 0.5mm step, 10-100 by 10mm step
3088-1 20807 88 Grade "1"
682EMZ Saw Tension Gauge
The Saw Tension Gauge will check for proper blade tension in
either English or metric, and is graduated both in pounds and
kilograms.
The tension gauge can be read directly on band saws of any
type or power hacksaws.
It is graduated to read up to 60,000 PSI or 4,000kg per cm2 and
is furnished with instructions, including suggested tensions.
682EMZ Saw Tension Gauge
Cat. No. EDP
682EMZ 57075
87
B
Bore Gauges ..................................... 36
C
Calibration, Accuracy/General Service Information ........v
Calipers
Leg Type ....................................... 79
Slide Type ...................................... 19
Dial ......................................... 24
Electronic ..................................... 20
Vernier ....................................... 24
Combination Squares .............................. 60
D
Depth Gauges .................................... 26
Dividers ......................................... 79
Durometer ....................................... 53
E
Edge Finders ..................................... 78
G
Gauge Blocks .................................... 86
Gauges
Crankshaft Distortion Dial/Strain ..................... 46
Dial
Groove ....................................... 45
Thickness .................................... 44
Universal Back-Plunger .......................... 41
"Feeler" Stock/Thickness ........................... 72
Fillet ........................................... 70
Fixed Gauges .................................... 69
Hole ........................................... 34
Radius ......................................... 70
Screw Pitch ..................................... 73
Taper .......................................... 71
Thickness ...................................... 72
H
Height Gauges .................................... 27
I
Indicators
Bases .......................................... 42
Dial ........................................... 40
Special Function ............................... 44
Spindle Squares ................................ 48
Electronic ....................................... 38
Holders ........................................ 42
L
Levels
Precision ....................................... 76
M
Machinists’ Precision Shop Tools .................... 75
Micrometers
Depth .......................................... 15
Electronic
Depth ........................................ 16
Outside ....................................... 2
Heads ......................................... 12
Inside .......................................... 17
End Measuring Rods ............................ 12
Heads & Solid Rods ............................. 12
Internal Micrometers ............................ 17
Tubular ...................................... 18
Outside ......................................... 2
Blade-Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Can Seam ..................................... 9
Disc-Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Insulated Frame ................................. 5
Interchangeable Anvil ............................. 6
Mechanical .................................... 4
Mul-T-Anvil ................................... 10
Rounded Anvils ................................. 9
Sheet Metal ................................... 11
Special Function ................................ 7
V-Anvil ........................................ 8
Stand ........................................... 5
P
Parallels ........................................ 68
Pin Vises ........................................ 80
Precision Shop Tools .............................. 75
Punches ........................................ 82
R
Rules
Precision ....................................... 66
S
Saw Tension Gauge ............................... 87
Scribers
Pocket ......................................... 81
Squares
Double ......................................... 64
Solid .......................................... 65
Toolmakers' Stainless Steel ......................... 65
T
Tap Wrenches .................................... 81
Testers
Hardness ....................................... 50
Surface & Hardness ............................... 49
Surface Roughness ............................... 55
Thickness ...................................... 54
88
9 Combination Squares ..........................62
11H Combination Squares ..........................63
13 Double Squares with hardened blades ..............64
14 Double Steel Squares ..........................64
18 Automatic Centre Punches ......................82
26 Firm-Joint Calipers, Outside. . . . . . . . . . . . . . . . . . . . . . 80
27 Firm-Joint Calipers, Inside .......................80
33H Combination Squares ..........................63
60 Precision Steel Squares .........................65
63 Long Range Micrometer Heads ...................13
66 Thickness Gauge ..............................72
70 Pocket Scribers ...............................81
73 "Yankee" Inside Calipers ........................79
79 "Yankee" Outside Calipers .......................79
83 "Yankee" Dividers .............................79
93 T-Handle Tap Wrenches .........................81
98 Machinists’ Levels .............................76
SR100 Surface Roughness Tester .......................55
117 Centre Punches ...............................83
124 Inside Micrometers ............................17
125 Vernier Calipers ...............................24
130 Bench Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
154 Adjustable Parallels ............................68
156 Screw Pitch Gauge ............................73
159 Screw Pitch Gauge ............................73
162 Pin Vises ....................................80
167 Radius/Fillet Gauges ...........................70
173 Thickness Gauges .............................72
196 Universal Back-Plunger Dial Indicators .............41
SR200 Surface Roughness Tester .......................56
207 Can Seam Outside Micrometers. . . . . . . . . . . . . . . . . . . . 9
208 Can Seam Outside Micrometers. . . . . . . . . . . . . . . . . . . . 9
220 Mul-T-Anvil Micrometer .........................10
222 Sheet Metal Micrometer ........................11
224 Interchangeable Anvil Micrometers .................6
234 End Measuring Rods ...........................12
248 Drive Pin Punches .............................83
256 Disc-Type Outside Micrometers ....................7
263 Micrometer Heads .............................12
269 Taper Gauges ................................71
270 Taper Gauge .................................71
272 Fillet or Radius Gauges .........................71
274 Toolmakers’ Inside Calipers ......................79
275 Toolmakers’ Outside Calipers. . . . . . . . . . . . . . . . . . . . . 79
C330 Steel Rules ..................................67
384 Steel Parallels ................................68
434 Combination Squares ..........................61
435 Combination Squares ..........................60
436 Outside Micrometers ............................4
440 Depth Micrometers ............................15
444 Micrometers with Insulated Frames .................5
445 Depth Micrometers ............................15
449 Micrometer Depth Gauges .......................15
460 Micrometer Heads .............................13
463 Micrometer Heads .............................13
467 Thickness Gauges .............................72
483 V-Anvil Outside Micrometers ......................8
486 Blade Type Outside Micrometers ...................8
565 Drive Pin Punches .............................84
B565 Brass Drive Pin Punches ........................84
576 Rounded Anvil Outside Micrometers ................9
577 Rounded Anvil OUtside Micrometers ................9
579 Telescoping Gauges ............................35
C635 Steel Rules ..................................67
649 Spindle Square ...............................48
653 Dial Gauge Stands .............................42
660 Magnetic Base Indicator Holder ...................42
661 Mini Magnetic Indicator Holder ...................43
666 Thickness Gauges/“Feeler” Stock .................74
667 Thickness Gauges/“Feeler” Stock .................74
682EMZ Saw Tension Gauge ............................87
696 Crankshaft Distortion Dial/Strain Gauge .............46
733 Electronic Micrometers (w/ output) .................3
749 Electronic Micrometer Depth Gauge ................16
762 Micrometer Heads .............................14
795 Electronic Micrometers (w/ output) .................2
796 Electronic Micrometers ..........................2
798 Electronic Calipers .............................20
799 Electronic Calipers .............................22
800 Square-Head Nail Sets .........................85
816 Prick Punches ................................85
818 Automatic Centre Punches ......................82
819 Automatic Centre Punches ......................82
823 Tubular Inside Micrometer Sets ...................18
827 Edge Finders .................................78
829 Small Hole Gauges ............................34
831 Small Hole Gauges ............................34
1015 Portable Dial Thickness Gauges ...................44
1175 Dial Indicator Groove Gauges .....................45
1202 Dial Calipers .................................24
2000 Altissimo® Electronic Height Gauges ..............30
2900 Electronic Indicators ...........................38
3015 Portable Dial Thickness Gauge ....................44
3020 Toolmakers’ Grade Stainless Steel Squares ..........65
3025 Dial Indicators ................................40
3047.0 Precision Gauge Blocks .........................87
3047.1 Precision Gauge Blocks .........................87
3081 Dial Indicators ................................40
3088.0 Precision Gauge Blocks .........................87
3088.1 Precision Gauge Blocks .........................87
3089 Dial Bore Gauge ..............................36
3097Z Precision Level ...............................77
3206 Outside Micrometer Stand ........................5
3259 Dial & Digital Height Gauges .....................32
3600 Electronic Indicators ...........................39
3657 Magnetic Indicator Holders ......................43
3732 Electronic Micrometers ..........................3
3751 Electronic Height Gauge ........................27
3752 Electronic Height Gauges ........................28
3753 Electronic Depth Gauges ........................26
3805A Electronic Durometer ...........................53
3808 Dial Indicators ................................40
3809 Dial Indicators ................................40
3811A Compact Hardness Tester .......................52
3812 Ultrasonic Thickness Tester ......................54
3814 Analog Bench Hardness Tester. . . . . . . . . . . . . . . . . . . . 50
3815 Twin Analog Bench Hardness Tester ................51
RS 9.MA1 Rectangular Steel Gauge Block Set ................86
RS 10.MA Micrometer Checking Set .......................86
RS 45.MA1 Rectangular Steel Gauge Block Set ................86
RS 88.MA1 Rectangular Steel Gauge Block Set ................86
RS 112.MA1 Rectangular Steel Gauge Block Set ................86
RY 45.MAA Rectangular Ceramic Gauge Block Set .............. 86
RY 88.MAA Rectangular Ceramic Gauge Block Set .............. 86
89
Bore Gauges....................................36
Calipers & Dividers ..............................79
Depth Gauges...................................26
Fixed Gauges ...................................69
Gauge Blocks...................................86
Height Gauges ..................................25
Hole Gauges ....................................34
Indicators & Gauges .............................37
Indicators, Dial..................................40
Indicators, Electronic ............................38
Indicators, Holders ..............................42
Indicators, Special Function .......................44
Levels, Precision ................................76
Micrometers, Depth ..............................15
Micrometers, Electronic Outside.....................2
Micrometers, End Measuring Rods..................12
Micrometers, Heads..............................14
Micrometers, Inside..............................17
Micrometers, Mechanical Outside ...................4
Micrometers, Special Function Outside ...............7
Parallels .......................................68
Precision Shop Tools .............................75
Precision Gauge Blocks...........................86
Rules, Precision .................................66
Slide Calipers, Dial...............................24
Slide Calipers, Electronic..........................20
Slide Calipers, Vernier ............................24
Squares, Combination ............................60
Squares, Double.................................64
Squares, Solid ..................................65
Testers, Hardness ...............................50
Testers, Surface Roughness .......................55
Testers, Thickness ...............................54
90
Precision, Quality, Innovation
The L. S Starrett Company
Oxnam Road
Jedburgh
Scotland
TD8 6LR
Tel: +44 (0) 1835 863501
Fax: +44 (0) 1835 863018
sales@starrett.co.uk
How to Order
For prompt delivery, technical support and assistance, contact your
nearest industrial distributor.
Product Demonstration
All Starrett manufacturing and branch locations and many distributors
can demonstrate an array of Starrett products at work. Contact your local
distributor to learn more.
www.starrett.co.uk
Catalogue 32E © The L.S. Starrett Company 11/11
Product specifications and availability subject to change.
