SPECIFICATIONS:
Models: 9095-N-XX, 9095-SMA-XX, 9095-TNC-XX
Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only.
9095: REV E
DC BIAS PASSING ATTENUATOR
50 MHz - 3 GHz, 100 Volts
*Other dB values available for special order.
SCHEMATIC DIAGRAM
TNC Connectors
Model Number: 9095-TNC-XX
SMA Connectors
Model Number: 9095-SMA-XX
Type N Connectors
Model Number: 9095-N-XX
9095-YYY-XX
HOW TO ORDER:
Model Number: 10 dB; Type N; Male/Fem
dB Value
20 dB; TNC; Male/Fem
Model Number: 9095-TNC-20
Model Number:
Ordering Examples:
9095-N-10
Connector Type
N = Type N
SMA = SMA
TNC = TNC
Length
See Table Ø.36 [9.1]
Length
See Table
Ø.56
[14.2]
Length
dB Value
3,4,6&10
20
1.21 ±.05
1.57 ±.05
Inches Millimeters
[30.7 ±1.3]
[39.9 ±1.3]
Length
dB Value
3,4,6&10
20 2.45 ±.05
Inches
2.07 ±.05
Millimeters
[52.6 ±1.3]
[62.2 ±1.3]
Diameter
See Table
Length
See Table
[14.2][57.9 ±1.3]
dB Value
3,4,6&10
20
[44.7 ±1.3]
2.28 ±.05
Length
1.76 ±.05
Ø.56
[15.8]
Ø.62
Diameter
Mechanical:
Electrical:
Mates with MIL-STD-348
(0 - 100 Watts)
(CC IN TO CC OUT)
**CENTER CONDUCTOR TO CASE DC ISOLATED > 5 MEGAOHMS
**dB Values < 15 dB are Typically Within + 1.0dB
Gold Plated Beryllium Copper or Brass
VSWR
Standard dB Values*
Operating Temp. Range
Connectors
Conductors
Voltage Rating
Frequency Range
1.35:1 Max.
Passivated Stainless Steel
100 Volts Max.
-55°C to +85°C
50 MHz - 3 GHz
Attenuation Accuracy
DC Current 2 Amps. Max.
±2.0 dB **
(@ 25°C Ambient)
RF Power (Avg) 2 Watts Max.
3, 4, 6, 10 & 20dB
Impedance 50 Ohms
0.25 Ohms Max.DC Resistance ***
Impedance
Derated Linearly to 0.7 Watts @ +85 C
o
Aeroflex / Inmet, Inc. 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A.
888-244-6638 or 734-426-5553 FAX: 734-426-5557
www.aeroflex.com/inmet • inmetsales@aeroflex.com
•
•
