DC BIAS PASSING ATTENUATOR 50 MHz - 3 GHz, 100 Volts SPECIFICATIONS: Models: 9095-N-XX, 9095-SMA-XX, 9095-TNC-XX Electrical: (@ 25C Ambient) Frequency Range Standard dB Values* Attenuation Accuracy Impedance DC Resistance *** 50 MHz - 3 GHz 3, 4, 6, 10 & 20dB 2.0 dB ** 50 Ohms 0.25 Ohms Max. (CC IN TO CC OUT) 1.35:1 Max. 100 Volts Max. 2 Amps. Max. VSWR Voltage Rating DC Current (0 - 100 Watts) RF Power (Avg) 2 Watts Max. Derated Linearly to 0.7 Watts @ +85oC -55C to +85C Operating Temp. Range **CENTER CONDUCTOR TO CASE DC ISOLATED > 5 MEGAOHMS Mechanical: Passivated Stainless Steel Connectors Mates with MIL-STD-348 Conductors Gold Plated Beryllium Copper or Brass SCHEMATIC DIAGRAM **dB Values < 15 dB are Typically Within + 1.0dB Length See Table Model Number: 9095-N-XX Type N Connectors Length Diameter 3, 4, 6 & 10 1.76 .05 [44.7 1.3] O.62 [15.8] 20 2.28 .05 [57.9 1.3] O.56 [14.2] dB Value Model Number: 9095-SMA-XX SMA Connectors Diameter See Table Length See Table O.36 [9.1] Length dB Value 3, 4, 6 & 10 20 Inches 1.21 .05 1.57 .05 Millimeters [30.7 1.3] [39.9 1.3] Length See Table Model Number: 9095-TNC-XX TNC Connectors Length dB Value 3, 4, 6 & 10 20 Inches 2.07 .05 2.45 .05 HOW TO ORDER: Model Number: 9095-YYY-XX O.56 [14.2] Millimeters [52.6 1.3] [62.2 1.3] Ordering Examples: Model Number: 9095-N-10 10 dB; Type N; Male/Fem Connector Type dB Value N = Type N Model Number: 9095-TNC-20 SMA = SMA 20 dB; TNC; Male/Fem TNC = TNC Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. *Other dB values available for special order. 9095: REV E Aeroflex / Inmet, Inc. * 300 Dino Drive, Ann Arbor, MI 48103 * U.S.A. 888-244-6638 or 734-426-5553 * FAX: 734-426-5557 www.aeroflex.com/inmet * inmetsales@aeroflex.com