tentative data sheet
product still under
development
Converter - Brake - Inverter Module
Features
•Package with DCB ceramic base plate
•High level of integration - only one
power semiconductor module required
for the whole drive
•Planar glass passivated chips
•NPT IGBT technology with low
saturation voltage, low switching
losses, high RBSOA and short circuit
ruggedness
•Epitaxial free wheeling diodes with
hiperfast and soft reverse recovery
•Temperature sense included
•Leads suitable for PC board
soldering
•UL Release applied
Application: AC motor drives with
•Input from single or three phase grid
•Three phase synchronous or
asynchronous motor
•Electric braking operations
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Preliminary Data Sheet
Caution: These Devices are sensitive
to electrostatic discharge. Users should
observe proper ESD handling precautions.
PSIPM 35/12
Symbol Test Conditions Characteristic Value
IRVR = VRRM, TVJ = TVJM ≤ 3 mA
VR = VRRM, TVJ = 25°C ≤0.5mA
V
F
IF = 55 A, TVJ = 25 °C ≤ 1.46 V
V
TO
For power-loss calculations only 0.8 V
r
T
13 mΩ
RthJC per diode; DC 1.1 K/W
I*
dAV
TC = 100 °C, (per circuit) 68 A
I
FSM
TVJ = 25°C; t = 10 ms; sin 50 Hz 300 A
V
RRM
1600 V
Symbol Test Conditions Maximum Ratings
Three Phase Brake Chopper Three Phase
Rectifier Inverter
VRRM = 1600 V VCES = 1200 V VCES = 1200 V
IFAVM = 68 A IC25 = 30 A IC25 = 49 A
IFSM = 300 A VCE(sat) = 2.6 V VCE(sat) = 3.1 V
Input Rectifiers
V4 V7
F1
C1
A15 A10 A5
V15
F15
H1 U1
V1
N1
L1 P1 R1
H15 N15 S15
U15
D15 J15 O15 V13
V11Q15L15
ECO-TOPTM 1
http://store.iiic.cc/
tentative data sheet
product still under
development
PSIPM 35/12
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Output Inverter IGBTs
Symbol Conditions Maximum Ratings
VCES TVJ = 25°C to 150°C 1200 V
VGES ± 20 V
IC25 TC = 25°C 49 A
IC80 TC = 80°C 33 A
ICM VGE = ±15 V; RG = 47 Ω; TVJ = 125°C 50 A
VCEK RBSOA, Clamped inductive load; L = 100 µH VCES
tSC VCE = VCES; VGE = ±15 V; RG = 47 Ω; TVJ = 125°C 10 µs
(SCSOA) non-repetitive
Ptot TC = 25°C 208 W
Symbol Conditions Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min. typ. max.
VCE(sat) IC = 50 A; VGE = 15 V; TVJ = 25°C 3.1 3.7 V
TVJ = 125°C 3.5 V
VGE(th) IC = 1 mA; VGE = VCE 4.5 6.5 V
ICES VCE = VCES;V
GE = 0 V; TVJ = 25°C 1.1 mA
TVJ = 125°C 4.2 mA
IGES VCE = 0 V; VGE = ± 20 V 180 nA
td(on) 100 ns
tr70 ns
td(off) 500 ns
tf70 ns
Eon 4.6 mJ
Eoff 3.4 mJ
Cies VCE = 25 V; VGE = 0 V; f = 1 MHz 1.65 nF
RthJC (per IGBT) 0.6 K/W
Inductive load, TVJ = 125°C
VCE = 600 V; IC = 30 A
VGE = 15/0 V; RG = 47 Ω
Output Inverter Reverse Diodes (FRED)
Symbol Conditions Maximum Ratings
IF25 TC = 25°C 49 A
IF80 TC = 80°C 31 A
Symbol Conditions Characteristic Values
min. typ. max.
VFIF = 30 A; TVJ = 25°C 2.4 2.7 V
TVJ = 125°C 1.77 V
IRM IF = 30 A; diF/dt = 500 A/µs; TVJ = 125°C 27 A
trr VR = 600 V; VGE = 0 V 150 ns
RthJC 1.3 K/W
http://store.iiic.cc/
tentative data sheet
product still under
development
PSIPM 35/12
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Brake Chopper Diode (FRED)
Symbol Conditions Maximum Ratings
IF25 TC = 25°C 26 A
IF80 TC = 80°C 17 A
Symbol Conditions Characteristic Values
min. typ. max.
VFIF = 17.5 A; TVJ = 25°C 2.48 2.79 V
TVJ = 125°C 1.84 V
IRM IF = 15 A; diF/dt = 400 A/µs; TVJ = 125°C 16 A
trr VR = 600 V; VGE = 0 V 130 n s
RthJC 2.3 K/W
Brake Chopper IGBT
Symbol Conditions Maximum Ratings
VCES TVJ = 25°C to 150°C 1200 V
VGES ± 20 V
IC25 TC = 25°C 30 A
IC80 TC = 80°C 21 A
ICM VGE = ±15 V; RG = 82 Ω; TVJ = 125°C 35 A
VCEK RBSOA, Clamped inductive load; L = 100 µH VCES
tSC VCE = VCES; VGE = ±15 V; RG = 82 Ω; TVJ = 125°C 10 µs
(SCSOA) non-repetitive
Ptot TC = 25°C 130 W
Symbol Conditions Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min. typ. max.
VCE(sat) IC = 25 A; VGE = 15 V; TVJ = 25°C 2.6 3.3 V
TVJ = 125°C 2.9 V
VGE(th) IC = 0.6 mA; VGE = VCE 4.5 6.5 V
ICES VCE = VCES;V
GE = 0 V; TVJ = 25°C 0.9 mA
TVJ = 125°C 3.7 mA
IGES VCE = 0 V; VGE = ± 20 V 100 nA
td(on) 100 ns
tr75 ns
td(off) 500 ns
tf70 ns
Eon 2.7 mJ
Eoff 2.1 mJ
Cies VCE = 25 V; VGE = 0 V; f = 1 MHz 1 nF
RthJC (per IGBT) 0.96 K/W
Inductive load, TVJ = 125°C
VCE = 600 V; IC = 17.5 A
VGE = 15/0 V; RG = 82 Ω
http://store.iiic.cc/
tentative data sheet
product still under
development
PSIPM 35/12
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Module
Symbol Conditions Maximum Ratings
TVJ -40...+125 °C
Tstg -40...+125 °C
VISOL IISOL ≤ 1 mA; 50/60 Hz 2500 V~
MdMounting torque (M5) 3 N m
26 lb.in.
aMax. allowable acceleration 50 m/s2
Symbol Conditions Characteristic Values
min. typ. max.
dSCreepage distance on surface (Pin to heatsink) 11.2 mm
dAStrike distance in air (Pin to heatsink) 11.2 mm
Weight 86 g
Temperature Sensor NTC
Symbol Conditions Characteristic Values
min. typ. max.
R25 T = 25°C 4.75 5.0 5.25 kΩ
B25/50 3375 K
Package style and outline
Dimensions in mm (1mm = 0.0394“)
http://store.iiic.cc/
