Converter - Brake - Inverter Module PSIPM 35/12 Preliminary Data Sheet C1 V15 U15 H15 A15 A10 A5 N15 L15 J15 D15 Q15 O15 L1 F15 F1 H1 S15 V11 V13 P1 R1 N1 U1 V1 t e e h r s e a t d a n d u l e l t i v t i n t s e a t t m c n p te odu elo pr dev V4 V7 Three Phase Rectifier Brake Chopper Three Phase Inverter V RRM I FAVM I FSM VCES = 1200 V IC25 = 30 A VCE(sat) = 2.6 V VCES = 1200 V IC25 = 49 A VCE(sat) = 3.1 V = 1600 V = 68 A = 300 A ECO-TOPTM 1 Input Rectifiers Symbol Test Conditions I* TC = 100 C, I dAV FSM V (per circuit) 68 TVJ = 25C; t = 10 ms; sin 50 Hz RRM Symbol IR Test Conditions VR = VRRM, TVJ = TVJM Features Maximum Ratings A 300 A 1600 V Characteristic Value 3 mA VR = VRRM, TVJ = 25C 0.5 mA V IF = 55 A, TVJ = 25 C 1.46 V V For power-loss calculations only F r TO T RthJC per diode; DC 0.8 V 13 m 1.1 K/W * * * * * * * * Package with DCB ceramic base plate High level of integration - only one power semiconductor module required for the whole drive Planar glass passivated chips NPT IGBT technology with low saturation voltage, low switching losses, high RBSOA and short circuit ruggedness Epitaxial free wheeling diodes with hiperfast and soft reverse recovery Temperature sense included Leads suitable for PC board soldering UL Release applied Application: AC motor drives with * * Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. * Input from single or three phase grid Three phase synchronous or asynchronous motor Electric braking operations 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ PSIPM 35/12 Output Inverter IGBTs Symbol Conditions VCES TVJ = 25C to 150C VGES IC25 IC80 ICM VCEK tSC (SCSOA) Ptot Symbol VCE(sat) VGE(th) ICES IGES td(on) tr td(off) tf Eon Eoff Maximum Ratings 1200 V t e e h r s e a t d a n d u l e l t i v t i n t s e a t t m c n p te odu elo pr dev 20 V TC = 25C TC = 80C 49 33 A A VGE = 15 V; RG = 47 ; TVJ = 125C RBSOA, Clamped inductive load; L = 100 H 50 A VCES VCE = VCES; VGE = 15 V; RG = 47 ; TVJ = 125C non-repetitive TC = 25C Conditions s 208 W Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. IC = 50 A; VGE = 15 V; TVJ = 25C TVJ = 125C 3.1 3.5 IC = 1 mA; VGE = VCE VCE = VCES; 10 VGE = 0 V; 4.5 TVJ = 25C TVJ = 125C VCE = 0 V; VGE = 20 V Inductive load, TVJ = 125C VCE = 600 V; IC = 30 A VGE = 15/0 V; RG = 47 Cies VCE = 25 V; VGE = 0 V; f = 1 MHz RthJC (per IGBT) 3.7 V V 6.5 V 1.1 4.2 mA mA 180 nA 100 70 500 70 4.6 3.4 ns ns ns ns mJ mJ 1.65 nF 0.6 K/W Output Inverter Reverse Diodes (FRED) Symbol Conditions Maximum Ratings IF25 IF80 TC = 25C TC = 80C 49 31 Symbol Conditions Characteristic Values min. typ. max. VF IF = 30 A; IRM t rr IF = 30 A; diF/dt = 500 A/s; TVJ = 125C VR = 600 V; VGE = 0 V TVJ = 25C TVJ = 125C 2.4 1.77 27 150 RthJC A A 2.7 V V A ns 1.3 K/W 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ PSIPM 35/12 Brake Chopper IGBT Symbol Conditions Maximum Ratings VCES TVJ = 25C to 150C 1200 V 20 V 30 21 A A VGE = 15 V; RG = 82 ; TVJ = 125C RBSOA, Clamped inductive load; L = 100 H 35 VCES A tSC (SCSOA) VCE = VCES; VGE = 15 V; RG = 82 ; TVJ = 125C non-repetitive 10 s P tot TC = 25C 130 W VGES IC25 IC80 I CM VCEK TC = 25C TC = 80C t e e h s r e a t d a n d u l e l t i v t i n t s e a t t m c n te odu elop r p dev Symbol Conditions Characteristic Values (TVJ = 25C, unless otherwise specified) min. VCE(sat) VGE(th) ICES IGES td(on) tr t d(off) tf Eon Eoff Cies RthJC IC = 25 A; VGE = 15 V; TVJ = 25C TVJ = 125C 2.6 2.9 IC = 0.6 mA; VGE = VCE VCE = VCES; VGE = 0 V; typ. max. 4.5 TVJ = 25C TVJ = 125C VCE = 0 V; VGE = 20 V 3.3 V V 6.5 V 0.9 3.7 mA mA 100 nA Inductive load, TVJ = 125C VCE = 600 V; IC = 17.5 A VGE = 15/0 V; RG = 82 100 75 500 70 2.7 2.1 ns ns ns ns mJ mJ VCE = 25 V; VGE = 0 V; f = 1 MHz 1 nF (per IGBT) 0.96 K/W Brake Chopper Diode (FRED) Symbol Conditions Maximum Ratings IF25 IF80 TC = 25C TC = 80C Symbol Conditions VF IF = 17.5 A; TVJ = 25C TVJ = 125C 2.48 1.84 I RM trr IF = 15 A; diF/dt = 400 A/s; TVJ = 125C VR = 600 V; VGE = 0 V 16 130 26 17 A A Characteristic Values min. typ. max. RthJC 2.79 V V A ns 2.3 K/W 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/ PSIPM 35/12 Temperature Sensor NTC Symbol R25 B25/50 Conditions Characteristic Values min. typ. max. T = 25C 4.75 t e e h s r e a t d a n d u l e l t i v t i n t s e a t t m c n p te odu elo pr dev 5.0 3375 5.25 k K Module Symbol TVJ Tstg VISOL Md a Symbol dS dA Weight Conditions Maximum Ratings -40...+125 -40...+125 C C IISOL 1 mA; 50/60 Hz 2500 V~ Mounting torque (M5) 3 26 50 Nm lb.in. m/s 2 Max. allowable acceleration Conditions Characteristic Values min. typ. max. Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) 11.2 11.2 mm mm 86 g Package style and outline Dimensions in mm (1mm = 0.0394") 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 http://store.iiic.cc/