EAO – Your Expert Partner for
Human Machine Interfaces
EAO Product Information
Series 84
84
Switches and Indicators
84
Contents
2
05.2009
Description......................................................................................................3
Product Assembly ..........................................................................................4
Mounting instruction......................................................................................6
Devices raised mounting ...............................................................................7
Devices flush mounting .................................................................................9
Accessories...................................................................................................13
Technical Data...............................................................................................27
Application guidelines..................................................................................30
Drawings........................................................................................................31
Index...............................................................................................................45
3
05.2009
84
Description
General notes
The Series 84 consists of indicators, pushbuttons and emergency-stop
switches. The indicators and pushbuttons are a modular system of lens,
actuator, switching element and a variety of means of connection and
mounting. Different front protection of IP 67, IP 65 or IP 40 ensure that
the pushbuttons are suited for industrial use.
Anodized aluminium parts can have visible variations due production-
technical reasons.
Mounting
The actuators of the Series 84 are inserted in a 22.5 mm diameter
mounting hole and the switching units are clipped on to the rear of the
actuators. The pushbutton system can be mounted as a complete unit
(actuator and switching unit). Mounting from the front with the wiring
already attached is also possible.
When mounted on printed circuit boards the actuators are inserted in
the mounting hole 22.5 mm dia. and the switching elements are fixed on
the board. The printed circuit board is connected to the preassembled
actuator by means of the mounting flange. There is no need for
subsequent adjustment or spacing studs.
Lenses
The lenses are available in various colours and made either from plastic
or anodized aluminium.
Marking
The marking plates of the Series 84 can be marked by engraving or hot
stamping.
Specific symbols and markings are available on request.
The lenses are without holder not engravable, since by mounting no
accurate position of the engraving text is reached.
Illumination
To ensure full illumination, the switching elements can be supplied with
integrated single LEDs in the colours red, orange, yellow, green, blue or
white. The series resistor is integrated.
Luminosity and wave length scattering caused by the technology used
in the LED manufacturing processes may lead to visual differences in
our products.
Emergency-stop pushbutton, foolproof
The E-stop pushbutton can be mounted in front panels with a thickness
between 1 and 4 mm. It has a low behind-panel depth of 13.5 mm
(max.) respectively 18.5 mm with plug-in terminlas and can be safely
and easily adapted to PCBs of different heights. The front protection
degree is IP 65.
Importantly, the Series 84 emergency-stop requires no additional
assembly because of its single-piece 'monoblock' design.
The switch's status is clearly indicated by a black or green colour ring
on the shaft, and the foolproof actuator design conforms to DIN EN ISO
13850 and EN IEC 60947.
It can be supplied with LED illumination that is visible even from the
side.
Specimen order
0
We reserve the right to modify technical data
All dimensions in mm
Product Information Indicator :
- Indicator actuator, IP67 84-0100.0
Essential accessories :
- Lens plastic blue 84-7111.600
- Illumination element
Single-LED blue 24VDC, plug-in terminal 84-8001.6620
or
Indicator with PCB terminal :
- Indicator actuator, IP67 84-3100.1
Essential accessories :
- Lens plastic red 84-7111.200
- Illumination element with PCB terminal 92-800.042
- Single-LED red 2.1VDC 10-2602.3202L
- Mounting flange 92-960.0
84
Product Assembly
4
05.2009
Indicator and pushbutton illuminative, 25 mm dia.
01 Lens
2 Marking plate
3 Lens holder
4 Actuator housing
5 Outer sealing
6 Inner sealing
7 Front panel
8 Fixing nut
9 Switching-/Illumination element with plug-in terminal (solderable)
Indicator and pushbutton illuminative, 40 mm dia.
01 Lens
2 Marking plate
3 Lens holder
4 Actuator housing
5 Sealing
6 Front panel
7 Fixing nut
8 Switching-/Illumination element with flat ribbon cable
1
2
3
7
4
5
6
8
9
1
2
3
6
4
5
7
8
84
Product Assembly
5
05.2009
Indicator and pushbutton illuminative, 25 mm dia., PCB version
01 Lens
2 Marking plate
3 Lens holder
4 Actuator housing
5 Sealing
6 Front panel
7 Fixing nut
8 Mounting flange
9 Switching-/Illumination element with PCB terminal
10 PCB
11 Fixing screws
Emergency-stop pushbutton
01 Emergency-stop pushbutton
2 Fixing nut
3 Position indication ring green or black
1
2
3
7
4
5
6
8
9
10
11
1
3
2
84
Mounting instruction
6
05.2009
0
The arrangement of the mounting flanges and their number is determined by the size of
the front panel or PCB. To ensure uniform, tactile switching, we recommend a layout of
the flanges as per adjacent sketch.
For large PCBs with several switching elements we recommend the following procedure :
1. Fit the actuator to the front panel.
2. Clip the mounting flange to the rear of the intended actuator.
3. Screw the PCB with the components soldered to it to the assembled mounting flange.
This arrangement applies to PCBs 1.6 mm thick.
>
The tool 84-998 must be used for removing the mounting flange from the actuator. Before
removing the flange, the PCB fixing srews must be loosened.
Arrangement mounting flange for switching- and illumination element, PCB mounting
Dismantling mounting flange
84
Devices raised mounting
7
10.2011
Application as per DIN EN ISO 13850 and EN 60204-1
Continuation see next page
Standard version:
Flat ribbon-cable length 300 mm; Plug-in terminal 2.8 x 0.5 mm.
Other options on request:
Customisation of flat ribbon-cable and connectors.
Switching action: MA = Maintained action
Terminals: FR = Flat ribbon cable, PT 2.8 s = Plug-in terminal 2.8 mm (solderable)
Contacts: NC = Normally closed, NO = Normally open
Component layout from page 31, Mounting dimensions from page 34, Technical drawing from page 35, Circuit drawing from page 43
Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete
Front protection
Switching action
Mushroom
had cap
Illumination
Terminals
Contacts
Ø 32 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Emergency-stop pushbutton,
foolproof EN IEC 60947-5-5,
complete
Position indication ring black
Twist to unlock clockwise
IP 65 MA Plastic red without FR 1 NC 84-5020.0040 2 2 17 80.036
1 NC + 1 NO 84-5030.0040 2 2 17 90.036
2 NC 84-5040.0040 2 2 17 10 0.036
PT 2.8 s 1 NC 84-5020.0020 1 2 17 80.028
1 NC + 1 NO 84-5030.0020 1 2 17 90.028
2 NC 84-5040.0020 1 2 17 10 0.028
Position indication ring black
Twist to unlock clockwise
LED operating voltage: 5 ... 30 VDC
Current consumption: 9.7 ...12.4 mA
IP 65 MA Plastic red LED red FR 1 NC 84-5021.2B40 2 2 17 11 0.036
1 NC + 1 NO 84-5031.2B40 2 2 17 12 0.036
2 NC 84-5041.2B40 2 2 17 13 0.036
PT 2.8 s 1 NC 84-5021.2B20 1 2 17 11 0.028
1 NC + 1 NO 84-5031.2B20 1 2 17 12 0.028
2 NC 84-5041.2B20 1 2 17 13 0.028
Position indication ring green
Twist to unlock clockwise
IP 65 MA Plastic red without FR 1 NC 84-5120.0040 2 2 17 80.036
1 NC + 1 NO 84-5130.0040 2 2 17 90.036
2 NC 84-5140.0040 2 2 17 10 0.036
PT 2.8 s 1 NC 84-5120.0020 1 2 17 80.028
1 NC + 1 NO 84-5130.0020 1 2 17 90.028
2 NC 84-5140.0020 1 2 17 10 0.028
Position indication ring green
Twist to unlock clockwise
LED operating voltage: 5 ... 30 VDC
Current consumption: 9.7 ... 12.4 mA
IP 65 MA Plastic red LED red FR 1 NC 84-5121.2B40 2 2 17 11 0.036
1 NC + 1 NO 84-5131.2B40 2 2 17 12 0.036
2 NC 84-5141.2B40 2 2 17 13 0.036
PT 2.8 s 1 NC 84-5121.2B20 1 2 17 10 0.028
1 NC + 1 NO 84-5131.2B20 1 2 17 12 0.028
2 NC 84-5141.2B20 1 2 17 13 0.028
84
Devices raised mounting
8
10.2011
Continuation see next page
Standard version:
Flat ribbon-cable length 300 mm; Plug-in terminal 2.8 x 0.5 mm.
Other options on request:
Customisation of flat ribbon-cable and connectors.
Switching action: MA = Maintained action
Terminals: FR = Flat ribbon cable, PT 2.8 s = Plug-in terminal 2.8 mm (solderable)
Contacts: NC = Normally closed, NO = Normally open
Component layout from page 31, Mounting dimensions from page 34, Technical drawing from page 35, Circuit drawing from page 43
Stop pushbutton grey, complete
Front protection
Switching action
Mushroom
had cap
Illumination
Terminals
Contacts
Ø 32 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Stop pushbutton grey, complete
Position indication ring black
Twist to unlock clockwise
IP 65 MA Plastic grey without FR 1 NC 84-6820.0040 2 2 17 80.036
1 NC + 1 NO 84-6830.0040 2 2 17 90.036
2 NC 84-6840.0040 2 2 17 10 0.036
PT 2.8 s 1 NC 84-6820.0020 1 2 17 80.028
1 NC + 1 NO 84-6830.0020 1 2 17 90.028
2 NC 84-6840.0020 1 2 17 10 0.028
Position indication ring black
Twist to unlock clockwise
LED operating voltage: 5 ... 30 VDC
Current consumption: 9.7 ...12.4 mA
IP 65 MA Plastic grey LED red FR 1 NC 84-6821.2B40 2 2 17 11 0.036
1 NC + 1 NO 84-6831.2B40 2 2 17 12 0.036
2 NC 84-6841.2B40 2 2 17 13 0.036
PT 2.8 s 1 NC 84-6821.2B20 1 2 17 11 0.028
1 NC + 1 NO 84-6831.2B20 1 2 17 12 0.028
2 NC 84-6841.2B20 1 2 17 13 0.028
84
Devices flush mounting
9
05.2009
Illuminated lens, non-illuminated bezel
Essential Accessories:
d Illumination element page 17
d Lens plastic page 13
Continuation see next page
Mounting dimensions from page 34, Technical drawing from page 35
Illuminated lens, non-illuminated bezel
Essential Accessories:
d Lens plastic page 13
d Switching element illuminated page 19
Continuation see next page
Switching action: M = Momentary action
Mounting dimensions from page 34, Technical drawing from page 35, Circuit drawing from page 43
Indicator actuator
Front protection
Front ring Ø 25 mm
Typ-Nr.
Mounting dimensions
Technical drawing
e
Indicator actuator IP 40 Plastic black 84-3100.0 1160.004
IP 67 Aluminium natural 84-0200.7 1160.008
Plastic black 84-0100.0 1160.003
Illuminated pushbutton actuator
Switching action
Front protection
Front ring Ø 40 mm
Typ-Nr. Ø 25 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Illuminated pushbutton actuator M IP 67 Aluminium natural 84-1221.7 3 18 4 0.022
IP 40 Plastic black 84-2101.0 1 16 4 0.004
IP 67 Aluminium black 84-1201.0 1 16 4 0.008
Aluminium blue 84-1201.6 1 16 4 0.008
Aluminium gold 84-1201.4 1 16 4 0.008
Aluminium natural 84-1201.7 1 16 4 0.008
Aluminium olive-green 84-1201.5 1 16 4 0.008
Aluminium red 84-1201.2 1 16 4 0.008
Plastic black 84-1101.0 1 16 4 0.003
84
Devices flush mounting
10
05.2009
Non-illuminated lens and bezel
Essential Accessories:
d Lens metal page 14
d Switching element non-illuminated page 20
Continuation see next page
Switching action: M = Momentary action
Mounting dimensions from page 34, Technical drawing from page 35, Circuit drawing from page 43
Essential Accessories:
d Illumination element page 17
d Lens metal for Ring illumination page 14
Continuation see next page
Accessories for ring illumination:
Essential lenses Typ-Nr. 84-7202.x00A and 84-7205.x00A
Bi-colour illumination elements are not recommended.
Mounting dimensions from page 34, Technical drawing from page 35
Pushbutton actuator
Front protection
Switching action
Front ring Ø 40 mm
Typ-Nr. Ø 25 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Pushbutton actuator IP 67 M Aluminium natural 84-1221.7 3 18 4 0.022
IP 40 M Plastic black 84-2101.0 1 16 4 0.004
IP 67 M Aluminium black 84-1201.0 1 16 4 0.008
Aluminium blue 84-1201.6 1 16 4 0.008
Aluminium gold 84-1201.4 1 16 4 0.008
Aluminium natural 84-1201.7 1 16 4 0.008
Aluminium olive-green 84-1201.5 1 16 4 0.008
Aluminium red 84-1201.2 1 16 4 0.008
Plastic black 84-1101.0 1 16 4 0.003
Indicator actuator with ring illumination (illuminated bezel)
Front protection
Front ring Ø 25 mm
Typ-Nr.
Mounting dimensions
Technical drawing
e
Indicator actuator with ring illumination (illuminated bezel) IP 67 Plastic translucent 84-0090.7 1 16 0.006
84
Devices flush mounting
11
05.2009
Essential Accessories:
d Lens metal for Ring illumination page 14
d Switching element illuminated page 19
Continuation see next page
Accessories for ring illumination:
Essential lenses Typ-Nr. 84-7202.x00A and 84-7205.x00A
Bi-colour switching elements are not recommended.
Switching action: M = Momentary action
Mounting dimensions from page 34, Technical drawing from page 35, Circuit drawing from page 43
Essential Accessories:
d IIlumination element PCB mounting page 21
d Lens plastic page 13
d Mounting flange page 21
d Single-LED page 22
Continuation see next page
Mounting dimensions from page 34, Technical drawing from page 35
Pushbutton actuator with ring illumination (illuminated bezel)
Switching action
Front protection
Front ring Ø 25 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Pushbutton actuator with ring illumination (illuminated bezel) M IP 67 Plastic translucent 84-1091.7 1 16 4 0.006
Indicator actuator with ring illumination (illuminated multi-colour bezel)
Front protection
Front ring Ø 25 mm
Typ-Nr.
Mounting dimensions
Technical drawing
e
Indicator actuator with ring illumination (illuminated multi-colour bezel) IP 67 Plastic transparent 84-0080.7 1160.006
84
Devices flush mounting
12
05.2009
Essential Accessories:
d Lens plastic page 13
d Mounting flange page 21
d Single-LED page 22
d Switching element PCB mounting illuminative page 21
Continuation see next page
Switching action: M = Momentary action
Mounting dimensions from page 34, Technical drawing from page 35, Circuit drawing from page 43
Pushbutton actuator with ring illumination (illuminated multi-colour bezel)
Switching action
Front protection
Front ring Ø 25 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Pushbutton actuator with ring illumination
(illuminated multi-colour bezel) M IP 67 Plastic transparent 84-1081.7 1 16 4 0.006
13
05.2009
84
Accessories
Continuation see next page
can be hot stamped
Continuation see next page
Continuation see next page
The silvery coat is being applied on the lens (screen print) with an additional protective lacquer.
Front
Lens plastic
Mounting type Lens Ø 25 mm
Typ-Nr. e
Lens plastic
flush - level, illuminative level with bezel blue transparent 84-7111.600 0.001
colourless transparent 84-7111.700 0.001
green transparent 84-7111.500 0.001
orange transparent 84-7111.300 0.001
red transparent 84-7111.200 0.001
yellow transparent 84-7111.400 0.001
flush - level, non-illuminative level with bezel black opaque 84-7121.000 0.001
level with bezel grey opaque 84-7121.800 0.001
flush - raised, illuminative raised above bezel blue transparent 84-7115.600 0.001
colourless transparent 84-7115.700 0.001
green transparent 84-7115.500 0.001
orange transparent 84-7115.300 0.001
red transparent 84-7115.200 0.001
yellow transparent 84-7115.400 0.001
flush - raised, non-illuminative raised above bezel black opaque 84-7125.000 0.001
grey opaque 84-7125.800 0.001
Marking plate for lens plastic
Marking plate Typ-Nr. e
Marking plate for lens plastic Plastic colourless transparent 61-9707.7 0.001
Lens plastic with symbol
Mounting type Symbol Lens Ø 25 mm
Typ-Nr. e
Lens plastic with symbol
flush - level, illuminative level with bezel ON/OFF blue transparent 84-7111.602 0.002
colourless transparent 84-7111.702 0.002
green transparent 84-7111.502 0.002
red transparent 84-7111.202 0.002
Ring blue transparent 84-7111.601 0.002
colourless transparent 84-7111.701 0.002
green transparent 84-7111.501 0.002
orange transparent 84-7111.301 0.002
red transparent 84-7111.201 0.002
yellow transparent 84-7111.401 0.002
Stand by blue transparent 84-7111.603 0.002
colourless transparent 84-7111.703 0.002
green transparent 84-7111.503 0.002
red transparent 84-7111.203 0.002
14
05.2009
84
Accessories
Continuation see next page
Continuation see next page
Lens metal
Mounting type Lens Ø 25 mm
Typ-Nr. e
Lens metal
convex - level, non-illuminative level with bezel Aluminium black 84-7202.000 0.003
Aluminium blue 84-7202.600 0.003
Aluminium gold 84-7202.400 0.003
Aluminium natural 84-7202.800 0.003
Aluminium olive-green 84-7202.500 0.003
Aluminium red 84-7202.200 0.003
flush - level, non-illuminative level with bezel Aluminium black 84-7201.000 0.003
Aluminium blue 84-7201.600 0.003
Aluminium gold 84-7201.400 0.003
Aluminium natural 84-7201.800 0.003
Aluminium olive-green 84-7201.500 0.003
Aluminium red 84-7201.200 0.003
flush - raised, non-illuminative raised above bezel Aluminium black 84-7205.000 0.003
Aluminium blue 84-7205.600 0.003
Aluminium gold 84-7205.400 0.003
Aluminium natural 84-7205.800 0.003
Aluminium olive-green 84-7205.500 0.003
Aluminium red 84-7205.200 0.003
Lens metal for Ring illumination
Mounting type Lens Ø 25 mm
Typ-Nr. e
Lens metal for Ring illumination
convex - raised, non-illuminative raised above bezel Aluminium black 84-7202.000A 0.004
Aluminium blue 84-7202.600A 0.004
Aluminium gold 84-7202.400A 0.004
Aluminium natural 84-7202.800A 0.004
Aluminium olive-green 84-7202.500B 0.004
Aluminium red 84-7202.200A 0.004
flush - raised, non-illuminative raised above bezel Aluminium black 84-7205.000A 0.003
Aluminium blue 84-7205.600A 0.003
Aluminium gold 84-7205.400A 0.003
Aluminium natural 84-7205.800A 0.003
Aluminium olive-green 84-7205.500A 0.003
Aluminium red 84-7205.200A 0.003
15
05.2009
84
Accessories
Continuation see next page
Continuation see next page
for flush - level lenses only for protection IP 68
Continuation see next page
ATTENTION
when using the front protection cover the external sealing in the actuator has to be removed !
for devices 25 mm dia.
Continuation see next page
Technical drawing from page 35
Lens metal with spot
Mounting type Lens Ø 25 mm
Typ-Nr. e
Lens metal with spot
flush - level, illuminative level with bezel Aluminium black 84-7211.000 0.002
Aluminium blue 84-7211.600 0.002
Aluminium gold 84-7211.400 0.002
Aluminium natural 84-7211.800 0.002
Aluminium olive-green 84-7211.500 0.002
Aluminium red 84-7211.200 0.002
flush - raised, illuminative raised above bezel Aluminium black 84-7215.000 0.002
Aluminium blue 84-7215.600 0.002
Aluminium gold 84-7215.400 0.002
Aluminium natural 84-7215.800 0.002
Aluminium olive-green 84-7215.500 0.002
Aluminium red 84-7215.200 0.002
Mushroom-head cap
Mushroom had cap Ø 32 mm
Typ-Nr. e
Mushroom-head cap Plastic black opaque 84-7124.000A 0.004
Plastic blue opaque 84-7124.600A 0.004
Plastic blue transparent 84-7114.600A 0.004
Plastic green opaque 84-7124.500A 0.004
Plastic red opaque 84-7124.200A 0.004
Plastic yellow opaque 84-7124.400A 0.004
Front protective cap
Front protective cap Typ-Nr. e
Front protective cap Silicone natural transparent 84-9103.7 0.001
Legend frame
Typ-Nr.
Technical drawing
e
Legend frame
30 x 50 mm, adhesive, Aluminium black 61-9980.0 7 0.001
16
05.2009
84
Accessories
for Legend frame 61-9980.0
Continuation see next page
Continuation see next page
Technical drawing from page 35
Legend pl at e in se rt
Typ-Nr. e
Legend plate insert
14.5 x 23.5 mm, adhesive, Aluminium black 704.968.1 0.001
14.5 x 23.5 mm, adhesive, Aluminium natural 704.968.0 0.001
Blind plug
Blind plug Typ-Nr.
Technical drawing
e
Blind plug
Size 25 mm dia., for mounting hole 22.5 mm dia. Plastic black 61-9453.0 8 0.006
Size 36 mm dia., for mounting hole 30.5 mm dia. Plastic black 704.964.8 1 0.007
17
05.2009
84
Accessories
>
Continuation see next page
Standard version:
Cable length 300 mm with insulated ferrule; Plug-in terminal 2.8 x 0.8 mm.
Other options on request:
Customisation of cable and connectors; Rear side fully sealed (IP 67).
Protection degree (rear side):
IP 40, upgrade to IP 67 with plug typ-Nr. 84-900 possible; With applications where strong vibrations occure, the plugs may
become loose.
Terminals: FR = Flat ribbon cable, PT 2.8 s = Plug-in terminal 2.8 mm (solderable)
Circuit drawing from page 43
Backside
Illumination element
Protection degree
Illumination Operating voltage/-
current
Terminals
Typ-Nr.
Circuit drawing
e
Illumination element
LED and built-in resistor
included
IP 40 Single-LED blue 12 VDC, 10 mA FR 84-8001.6340 5 0.010
PT 2.8 s 84-8001.6320 5 0.005
24 VDC, 10 mA FR 84-8001.6640 5 0.010
PT 2.8 s 84-8001.6620 5 0.005
Single-LED green 12 VDC, 10 mA FR 84-8001.5340 5 0.010
PT 2.8 s 84-8001.5320 5 0.005
24 VDC, 10 mA FR 84-8001.5640 5 0.010
PT 2.8 s 84-8001.5620 5 0.005
Single-LED orange 12 VDC, 10 mA FR 84-8001.3340 5 0.010
PT 2.8 s 84-8001.3320 5 0.005
24 VDC, 10 mA FR 84-8001.3640 5 0.010
PT 2.8 s 84-8001.3620 5 0.005
Single-LED red 12 VDC, 10 mA FR 84-8001.2340 5 0.010
PT 2.8 s 84-8001.2320 5 0.005
24 VDC, 10 mA FR 84-8001.2640 5 0.010
PT 2.8 s 84-8001.2620 5 0.005
Single-LED white 12 VDC, 10 mA FR 84-8001.9340 5 0.010
PT 2.8 s 84-8001.9320 5 0.005
24 VDC, 10 mA FR 84-8001.9640 5 0.010
PT 2.8 s 84-8001.9620 5 0.005
Single-LED yellow 12 VDC, 10 mA FR 84-8001.4340 5 0.010
PT 2.8 s 84-8001.4320 5 0.005
24 VDC, 10 mA FR 84-8001.4640 5 0.010
PT 2.8 s 84-8001.4620 5 0.005
18
05.2009
84
Accessories
Continuation see next page
Standard version:
Cable length 300 mm with insulated ferrule; Plug-in terminal 2.8 x 0.8 mm.
Other options on request:
Customisation of cable and connectors; Rear side fully sealed (IP 67).
Best illumination level will be reached with Alu lens with window, Typ-Nr. 84-7215.x00 and 84-7211.x00.
Protection degree (rear side):
- Plug-in terminal IP 40, upgrade to IP 67 with plug typ-Nr. 84-900 possible. With applications where strong vibrations oc-
cure, the plugs may become loose.
- Cabel connection IP 67, rear side fully sealed. The illumination element of the cable version cannot be disconnected from
the actuator any longer.
Terminals: PT 2.8 s = Plug-in terminal 2.8 mm (solderable), FR = Flat ribbon cable
Circuit drawing from page 43
Illumination element with Bi-colour illumination
Illumination Operating voltage/-
current
Protection degree
Terminals
Typ-Nr.
Circuit drawing
e
Illumination element with
Bi-colour illumination
LED and built-in resistor included
Bi-colour LED
red/green 24 VDC, 20 mA IP 40 PT 2.8 s 84-8005.8620 10.005
IP 67 FR 84-8005.8640 20.011
Bi-colour LED
yellow/green 24 VDC, 20 mA IP 40 PT 2.8 s 84-8005.7620 10.005
IP 67 FR 84-8005.7640 20.011
19
05.2009
84
Accessories
Continuation see next page
Standard version:
Cable length 300 mm with insulated ferrule; Plug-in terminal 2.8 x 0.8 mm.
Other options on request:
Customisation of cable and connectors; Rear side fully sealed (IP 67).
Protection degree (rear side):
IP 40, upgrade to IP 67 with plug typ-Nr. 84-900 possible; With applications where strong vibrations occure, the plugs may
become loose.
Contacts: NO = Normally open
Terminals: FR = Flat ribbon cable, PT 2.8 s = Plug-in terminal 2.8 mm (solderable)
Circuit drawing from page 43
Switching element illuminated
Protection degree
Contacts
Illumination Operating voltage/-
current
Terminals
Typ-Nr.
Circuit drawing
e
Switching element
illuminated
LED and built-in
resistor included
IP 40 1 NO Single-LED blue 12 VDC, 10 mA FR 84-8511.6340 7 0.015
PT 2.8 s 84-8511.6320 7 0.006
24 VDC, 10 mA FR 84-8511.6640 7 0.015
PT 2.8 s 84-8511.6620 7 0.006
Single-LED green 12 VDC, 10 mA FR 84-8511.5340 7 0.015
PT 2.8 s 84-8511.5320 7 0.006
24 VDC, 10 mA FR 84-8511.5640 7 0.015
PT 2.8 s 84-8511.5620 7 0.006
Single-LED orange 12 VDC, 10 mA FR 84-8511.3340 7 0.015
PT 2.8 s 84-8511.3320 7 0.006
24 VDC, 10 mA FR 84-8511.3640 7 0.015
PT 2.8 s 84-8511.3620 7 0.006
Single-LED red 12 VDC, 10 mA FR 84-8511.2340 7 0.015
PT 2.8 s 84-8511.2320 7 0.006
24 VDC, 10 mA FR 84-8511.2640 7 0.015
PT 2.8 s 84-8511.2620 7 0.006
Single-LED white 12 VDC, 10 mA FR 84-8511.9340 7 0.015
PT 2.8 s 84-8511.9320 7 0.006
24 VDC, 10 mA FR 84-8511.9640 7 0.015
PT 2.8 s 84-8511.9620 7 0.006
Single-LED yellow 12 VDC, 10 mA FR 84-8511.4340 7 0.015
PT 2.8 s 84-8511.4320 7 0.006
24 VDC, 10 mA FR 84-8511.4640 7 0.015
PT 2.8 s 84-8511.4620 7 0.006
20
05.2009
84
Accessories
Continuation see next page
Protection degree IP 67, rear side fully sealed. The switching element cannot be disconnected from the actuator any lon-
ger.
Best illumination level will be reached with Alu lens with window, Typ-Nr. 84-7215.x00 and 84-7211.x00.
Standard version:
Cable length 300 mm with insulated ferrule.
Other options on request:
Customisation of cable and connectors.
Contacts: NO = Normally open
Terminals: FR = Flat ribbon cable
Circuit drawing from page 43
Continuation see next page
Standard version:
Cable length 300 mm with insulated ferrule; Plug-in terminal 2.8 x 0.8 mm (solderable).
Other options on request:
Customisation of cable and connectors; Rear side fully sealed (IP 67).
Protection degree (rear side):
IP 40, upgrade to IP 67 with plug typ-Nr. 84-900 possible; With applications where strong vibrations occure, the plugs may
become loose.
Contacts: NO = Normally open
Terminals: FR = Flat ribbon cable, PT 2.8 s = Plug-in terminal 2.8 mm (solderable)
Circuit drawing from page 43
Switching element with Bi-colour illumination
Protection degree
Contacts
Illumination Operating voltage/-
current
Terminals
Typ-Nr.
Circuit drawing
e
Switching element with
Bi-colour illumination
LED and built-in resistor
included
IP 67 1 NO Bi-colour LED
red/green 24 VDC, 20 mA FR 84-8515.8640 3 0.015
Bi-colour LED
yellow/green 24 VDC, 20 mA FR 84-8515.7640 3 0.015
Switching element non-illuminated
Protection degree
Contacts
Terminals
Typ-Nr.
Circuit drawing
e
Switching element non-illuminated IP 40 1 NO FR 84-8510.0040 6 0.010
PT 2.8 s 84-8510.0020 6 0.005
21
05.2009
84
Accessories
The customer has to decide what series resistor shall be used to the LED
Continuation see next page
Illumination and mounting flange to be ordered separately.
Contacts: NO = Normally open
Terminals: P = PCB terminal
Component layout from page 31, Technical drawing from page 35, Circuit drawing from page 43
The customer has to decide what series resistor shall be used to the LED
Continuation see next page
Illumination and mounting flange to be ordered separately.
Terminals: P = PCB terminal
Component layout from page 31, Technical drawing from page 35
Continuation see next page
Technical drawing from page 35
Continuation see next page
Switching element PCB mounting illuminative
Contacts
Terminals
Typ-Nr.
Component layout
Technical drawing
Circuit drawing
e
Switching element PCB mounting illuminative 1 NO P 92-851.342 415140.001
IIlumination element PCB mountin g
Terminals
Typ-Nr.
Component layout
Technical drawing
e
IIlumination element PCB mounting P92-800.042 3 9 0.001
Mounting flange
Typ-Nr.
Technical drawing
e
Mounting flange
Ring illumination (illuminated multi-color bezel) 84-960.0 13 0.001
Standard version (non-illuminated) 92-960.0 10 0.001
Flat receptacle
Typ-Nr. e
Flat receptacle
2.8 x 0.8 mm 84-9420 0.001
22
05.2009
84
Accessories
Continuation see next page
Continuation see next page
for back protection IP67 of switching elements and illumination elements.
Two plugs are nessecary per element.
>
The customer has to decide what series resistor shall be used to the LED
Continuation see next page
The customer has to decide what series resistor shall be used to the LED
Continuation see next page
The customer has to decide what series resistor shall be used to the LED
Continuation see next page
Insulation sleeve
Typ-Nr. e
Insulation sleeve
for Flat receptacles 84-9420 31-929 0.001
Plug
Typ-Nr. e
Plug 84-900 0.001
Illumination
Single-LED
Socket Light colour Operating voltage/-current Typ-Nr. e
Single-LED T1 Bi-Pin blue 3.5 VDC, 20 mA 10-2602.3206L 0.001
green 3.5 VDC, 20 mA 10-2602.3205L 0.001
orange 2.1 VDC, 20 mA 10-2602.3203L 0.001
red 2.1 VDC, 20 mA 10-2602.3202L 0.001
white 3.5 VDC, 20 mA 10-2602.3209L 0.001
yellow 2.2 VDC, 20 mA 10-2602.3174D 0.001
Bi-colour LED
Socket Light colour Operating voltage/-current Typ-Nr. e
Bi-colour LED T1 Bi-Pin red/green 1.9/3.5 VDC, 20 mA 10-2603.320AL 0.001
yellow/green 2.0/3.2 VDC, 20 mA 10-2603.320CL 0.001
Multi-LED
Socket Light colour Operating voltage/-current Typ-Nr. e
Multi-LED T1 Bi-Pin yellow 12 VDC, 40 mA 10-5609.3174D 0.001
23
05.2009
84
Accessories
>
front panel thickness 3 mm max.
Continuation see next page
Front panel thickness 1 ... 3 mm
Continuation see next page
Please note: By using the protective shroud Typ-Nr. 84-909 the E-stop or Stop-Switch has to be mounted twisted by
180 °. Consult the dimensional drawing therfore.
Technical drawing from page 35
Continuation see next page
Emergency-stop and Stop pushbutton
Emergency-stop label
Marking Typ-Nr. e
Emergency-stop label
60 mm dia., yellow, Mounting hole size 22.5 mm dia. ARRET D'URGENCE 704.963.7 0.011
EMERGENCY STOP 704.963.6 0.011
NOT AUS 704.963.5 0.011
NOT HALT 704.963.8 0.011
90 mm dia., yellow, Mounting hole size 22.5 mm dia. ARRET D'URGENCE 704.963.2 0.011
EMERGENCY STOP 704.963.1 0.011
NOT AUS 704.963.0 0.011
NOT HALT 704.963.3 0.011
Emergency-stop protective shroud
Protective shroud Marking Typ-Nr.
Technical drawing
e
Emergency-stop protective shroud
45 mm dia., IP 40, mounting hole 22.5 mm
dia., with anti-twist device
Metal yellow RAL 1004 without 84-909 12 0.021
50 mm dia., IP 65, mounting hole 22.5 mm
dia., with anti-twist device Plastic yellow EMERGENCY STOP 84-902B 14 0.006
NOT - AUS 84-902A 14 0.006
NOT - HALT 84-902D 14 0.006
without 84-902 14 0.006
Fixing nut
Fixing nut Typ-Nr. e
Fixing nut
28 mm dia., for limited-space applications Plastic black 84-905 0.002
30 mm dia., standard delivery Plastic black 84-908 0.002
24
05.2009
84
Accessories
Bottom grey similar RAL 7035; cover lead-sealable, yellow similar RAL 1004
Continuation see next page
Openings for cable gland M16 or M20.
Protection class IP 66.
Technical drawing from page 35
Grey similar RAL 7035; cover lead-sealable
Continuation see next page
Technical drawing from page 35
Continuation see next page
with traction relief; protection degree IP 68.
Continuation see next page
Emergency-stop enclosures
Dimension Typ-Nr.
Technical drawing
e
Emergency-stop enclosures
with mounting hole 22.5 mm dia., with anti- twist device L 65 mm, W 65 mm, H 57 mm 84-910 11 0.099
Stop pushbutton enclosure
Dimension Typ-Nr.
Technical drawing
e
Stop pushbutton enclosure
with mounting hole 1 x 22.5 mm dia., with anti-twist device L 94 mm, W 94 mm, H 81 mm 704.945.1 2 0.211
with mounting hole 2 x 22.5 mm dia., with anti-twist device L 130 mm, W 94 mm, H 81 mm 704.945.2 3 0.251
with mounting hole 3 x 22.5 mm dia., with anti-twist device L 180 mm, W 94 mm, H 81 mm 704.945.3 4 0.313
with mounting hole 4 x 22.5 mm dia., with anti-twist device L 180 mm, W 182 mm, H 110 mm 704.945.4 5 0.572
with mounting hole 6 x 22.5 mm dia., with anti-twist device L 180 mm, W 182 mm, H 110 mm 704.945.5 6 0.568
Cable gland
Typ-Nr. e
Cable gland
M16, Plastic grey 61-9481.6 0.007
M20, Plastic grey 704.945.6 0.011
Flat receptacle
Typ-Nr. e
Flat receptacle
2.8 x 0.5 mm for Plug-in terminal 31-946 0.001
25
05.2009
84
Accessories
Continuation see next page
>
Continuation see next page
Screws are not contained in the scope of supply.
Technical drawing from page 35
Continuation see next page
Screws are not contained in the scope of supply.
Technical drawing from page 35
Continuation see next page
Technical drawing from page 35
Insulation sleeve
Typ-Nr. e
Insulation sleeve
for Flat receptacles 31-946 31-929 0.001
Stop request pushbutton
Housing, pole mounting 35 mm dia.
Housing Colour Typ-Nr.
Technical drawing
e
Housing, pole mounting 35 mm dia. Plastic blue RAL 5017 traffic blue 84-9500.6A 19 0.035
Plastic grey RAL 7016 84-9500.8 19 0.035
Plastic yellow RAL 1023 84-9500.4 19 0.035
Housing, pole mounting 38 mm dia.
Housing Colour Typ-Nr.
Technical drawing
e
Housing, pole mounting 38 mm dia. Plastic grey RAL 7016 84-9600.8 20 0.030
Plastic yellow RAL 1023 84-9600.4 20 0.030
Adaptor, reducing to 30 mm dia.
Housing Colour Typ-Nr.
Technical drawing
e
Adaptor, reducing to 30 mm dia.
for housing, pole mounting 35 mm dia. Plastic grey RAL 7016 84-9700.8 23 0.024
Plastic yellow RAL 1023 84-9700.4 23 0.024
26
05.2009
84
Accessories
Continuation see next page
Technical drawing from page 35
Continuation see next page
Screws are not contained in the scope of supply.
Technical drawing from page 35
>
Continuation see next page
Continuation see next page
Continuation see next page
Adaptor, reducing to 25 mm dia.
Housing Colour Typ-Nr.
Technical drawing
e
Adaptor, reducing to 25 mm dia.
for housing, pole mounting 35 mm dia. Plastic grey RAL 7016 84-9300.8 22 0.008
Plastic yellow RAL 1023 84-9300.4 22 0.008
Housing, wall mounting
Housing Colour Typ-Nr.
Technical drawing
e
Housing, wall mounting Plastic grey RAL 7016 84-9800.8 21 0.024
Plastic yellow RAL 1023 84-9800.4 21 0.024
Assembling
Lens remover
Typ-Nr. e
Lens remover 61-9730.0 0.011
Mounting tool
Typ-Nr. e
Mounting tool
for tightening or loosening of Emergency-stop and Stop-Switch fixing nut 84-996 0.014
for tightening or loosening of Fixing nut, Indicator and Pushbutton 84-997 0.027
Dismantling tool
Typ-Nr. e
Dismantling tool
for actuator dismantling of switching- and illumination element and mounting flange 84-998 0.002
27
05.2009
84
Technical Data
Switching system
The double-break switching system can be supplied for the
following switching functions:
1 Normally closed, 2 Normally closed, 1 Normally closed +
1 Normally open.
The Normally closed contacts have forced opening according to
EN IEC 60947-5-1
Material
Connection cable
Polyvinylchloride (PVC), operating temperature up to +65 °C
Mushroom-head cap
Polybutylenterephthalate (PBT), as per UL 94 V0 (red items)
Actuator housing
Polyamide (PA 66), as per UL 94 V0, Flat ribbon cable-cover
Polyamide (PA 6.6), as per UL 94 V0
Material of contact
Silver alloy gold plated
Mechanical characteristics
Front panel thickness
Standard 1 ... 4 mm
with E-stop protective shroud Typ-Nr. 84-902 1 ... 3 mm
Mounting hole
22.5 mm dia. as per EN IEC 60947-5-1 with anti-twist device
Terminals
Soldering terminals 2.8 x 0.5 mm (solderable), CuSn6 tin-plated
Flat ribbon cable 2-, 4-, or 6-poles 0.35 mm² (AWG 22)
Tightening torque
Fixing nut 80 Ncm
Actuating force
22 N ±4 N
Actuating travel
approx. 4 mm to release the internal operation part
Mechanical lifetime
≥50.000 cycles of operations
Electrical cha rac te ris tic s
Standards
The devices comply with : EN IEC 60947-5-1, EN IEC 60947-5-5
(Emergency-stop), DIN EN ISO 13850, EN IEC 60204
Illumination
LED red with pole reversal, constant current source
0
Rated Operational Voltage Ue
250 VAC, as per EN IEC 60947-1
Rated Insulation Voltage Ui
250 V, as per EN IEC 60947-1
Rated Impulse Withstand Voltage Uimp
2.5 kV, as per EN IEC 60947-1
Contact resistance
New state ≤ 50 mΩ, as per DIN IEC 60512-2-3
Isolation resistance
>1011 Ω between the opend contats at 500 VDC, as per DIN IEC
60512-2-10
Electrical life
≥50 000 cycles of operations (inductive cosφ 0.4), as per EN IEC
60947-5-1
0
Conventional free air thermal current Ith
5 A, as per EN IEC 60947-5-1
the maximum current in continuous operation and at ambient
temperature must not exceed the quoted maximum values.
Switch rating
Switch rating AC with silver contact (gold plated), service category
AC-15, as per EN IEC 60947-5-1
0
Switch rating DC for silver contact (gold plated), service category
DC-13, as per EN IEC 60947-5-1 (inductive)
0
Recommended minimum operational data
Silver contacts (gold plated)
0
Electric strength
500 VAC, 50 Hz, 1 min, as per DIN IEC 60512-2
Rated conditional short-circuit current
1000 A, type of short-circuit unit 6 A gG, as per EN IEC 60947-5-1
Protection class
Class II, as per EN IEC 60947-5
Overvoltage category
II, as per EN IEC 60947-1
Degree of pollution
3, as per EN IEC 60947-1
Environmental conditions
Storage temperature
-25 °C ... +80 °C
Operating temperature
-25 °C ... +65 °C
Front protection
IP 65, as per EN IEC 60529
Emergency-stop
Operation Voltage 5 VDC ... 30 VDC
Current consumption 9.7 mA ... 12.4 mA
Voltage 120 VAC 240 VAC 125 VDC 250 VDC
Current 3 A 1.5 A 0.55 A 0.27 A
Reduced load ≥50'000 cycles of operations (resistive)
Voltage 1 VAC/DC 42 VAC/DC
Current 100 mA 200 mA
Voltage 120 VAC 240 VAC
Current 3 A 1.5 A
Voltage 12 VDC 24 VDC 48 VDC 60 VDC 125 VDC 250 VDC
Current Plug 5 A 4 A 2.1 A 1.7 A 0.55 A 0.27 A
Current Cable 3 A 3 A 2.1 A 1.7 A 0.55 A 0.27 A
Voltage 1 VAC/DC
Current 1 mA
28
05.2009
84
Technical Data
Shock resistance
(semi-sinusoidal)
max. 150 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-
27
Vibration resistance
(sinusoidal)
max. 50 m/s² at 10 Hz ... 500 Hz, 10 cycles, 3-axis, as per EN IEC
60068-2-6
Climate resistance
Damp heat, cyclic
96 hours, +25 °C / 97 %, +55 °C / 93 % relative humidity, as per EN
IEC 60068-2-30
Damp heat, steady
56 days, +40 °C / 93 % relative humidity, as per EN IEC 60068-2-78
Dry heat
96 hours, +70 °C, as per EN IEC 60068-2-2
Low temperature
96 hours, -40 °C, as per EN IEC 60068-2-1
Saline mist
96 Stunden, +35 °C in chemical solution NaCl, as per EN IEC
60068-2-11
Approvals
Approbations
SEV
UL
Declaration of conformity
CE
>
Switching system
Short-travel switching system with 2 independent contact points
and tactile operation.
Guarantees reliable switching even of very light loads.
Fitted with 1 normally open contact.
Material
Connection cable
Polyvinylchloride (PVC), short-time heat-resistant up to 105 °C
Material of contact
Silver alloy gold plated
Switching element
Thermoplastic polyester (PET, PBT), as per UL 94 V0 and Polyace-
tale (POM), as per UL 94 HB
Mechanical characteristics
Terminals
Plug-in terminals 2.8 x 0.8 mm (solderable)
Flat ribbon cable 0.5 mm²
PCB terminal
Actuating force
4.0 N ±0.2 N (measured at the lens)
Actuating travel
~0.5 mm
Rebound time
≤1 ms
Resistance to heat of soldering
260 °C, 5 s (PCB assembly)
350 °C, 10 s (when using a soldering iron)
as per EN IEC 60068-2-20
Mechanical lifetime
≥1 million cycles of operations
Electrical characteristics
Illumination
Single-Chip or Multi-Chip LED, green, orange, red, yellow, white
and blue
0
Contact resistance
Starting value (initial) ≤100 mΩ, as per DIN IEC 60512-2
Isolation resistance
≥1 G Ω between all terminals at 100 VDC, as per DIN IEC 60512-2
Electrical life
as per EN IEC 60512-5
0
Switch rating
0
Electric strength
500 VAC, 50 Hz, 1 min, as per DIN IEC 60512-2
Environmental conditions
Storage temperature
-40 °C ... +85 °C
Operating temperature
-25 °C ... +70 °C
Protection degree
Back protection:
IP 40, standard version
IP 67, fully sealed version, with mounted actuator only.
Switching element illuminated pushbutton
Operation Voltage 12 VDC 24 VDC
Current consumption 40 mA 20 mA
5 million cycles of operation 24 VAC, 50 mA at 480 Ω
5 million cycles of operation 24 VAC, 100 mA at 240 Ω
2 million cycles of operation 42 VAC, 50 mA at 840 Ω
2 million cycles of operation 42 VAC, 100 mA at 420 Ω
300 000 cycles of operation 42 VAC, 100 mA at cosφ 0,4
250 000 cycles of operation 42 VAC, 200 mA at cosφ 0,395
1 million cycles of operation 12 VDC, 250 mA at 48 Ω
1 million cycles of operation 24 VDC, 50 mA at 480 Ω
1 million cycles of operation 24 VDC, 100 mA at 240 Ω
5 million cycles of operation 42 VDC, 25 mA at 1680 Ω
1.5 million cycles of operation 42 VDC, 50 mA at 840 Ω
100 000 cycles of operation 42 VDC, 100 mA at 420 Ω
500 000 cycles of operation 24 VDC, 200 mA at L/R=30 ms
300 000 cycles of operation 42 VDC, 100 mA at L/R=30 ms
100 000 cycles of operation 42 VDC, 200 mA at L/R=30 ms
Voltage 50 mVAC/DC ... 42 VAC/DC
Current 10 uA ... 100 mA
Power max. 2 W
29
05.2009
84
Technical Data
Shock resistance
(semi-sinusoidal)
max. 100 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-
27
Vibration resistance
(sinusoidal)
max. 50 m/s² at 10 Hz ... 500 Hz, 10 cycles, 3-axis, as per EN IEC
60068-2-6
>
Material
Lens
Polycarbonate (PC), as per UL 94 V2 or Aluminium anodised
Actuator housing
Polyetherimid (PEI), as per UL 94 V0 or Aluminium anodised
Mechanical characteristics
Mounting hole
22.5 mm dia. and 30.5 mm dia.
Tightening torque
Fixing nut max. 80 Ncm
Actuating force
4.0 N ±0.2 N (measured at the lens)
Actuating travel
Total switching travel 1.2 mm
Mechanical lifetime
≥1 million cycles of operations
Electrical cha rac te ris tic s
Electrostatic breakdown value
0
as per IEC 61000-4-2, mounted in plastic front panel
Environmental conditions
Storage temperature
-40 °C ... +85 °C
Operating temperature
-25 °C ... +70 °C
Front protection
IP 67 and IP40, as per EN IEC 60529
Climate resistance
Damp heat, cyclic
96 hours, +25 °C / 97 %, +55 °C / 93 % relative humidity, as per EN
IEC 60068-2-30
Damp heat, state
56 days, +40 °C / 93 % relative humidity, as per EN IEC 60068-2-78
Rapid change of temperature
100 cycles, -40 °C ... +80 °C, as per EN IEC 60068-2-14
Actuator
Plastic case ≥15 kV
Aluminium case ≥5 kV
84
Application guidelines
30
05.2009
When switching inductive loads such as r elays, DC motors, and DC solenoids, it is always important
to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched
off, a counter emf can severely damage switch contacts and greatly shorten lifetime.
Fig. 1 shows an induct ive load with a free-wheeling diode connected in parallel. This free-wheeling
diode provides a path for the inductor current to flow when the current is interrupted by the switch.
Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric break-
down voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude
even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2.
The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the
voltage driving the inductive load. The DC blocking voltage (VR) of t he free-wheeling diode can be
found in the datasheet of a diode. The forward current should be equal or greater than the maximum
current flowing through the load.
To get an efficient protection, the free-wheeling diode must be connected as close as possible
to the inductive load!
0
Suppressor circuits
Sveral hundred
to several
thousend volts
ON OFF
0
e = L di
dt
__
VDC
Switch
Free-wheeling
diode
Inductive
load
Counter emf
over load without free-wheeling diode
Fig. 2
Switching with inductive load
Fig. 1
+
_
84
Drawings
31
05.2009
1 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop pushbutton grey, complete page 8
2 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop pushbutton grey, complete page 8
Component layout
84
Drawings
32
05.2009
3 IIlumination element PCB mounting page 21
Libraries for the PCB layout-system p-cad 200X see : www.pcad.com/en/library Third-party Libraries
Drilling plan (Elementside)
A Fixing holes for mounting flange (92-960.0)
B Holes for Bi-colour LED:
BA1 (green) + BA2 (yellow or red) = Anodes, BC = Cathode
C Holes for centering pins
Drilling plan (Elementside)
A Fixing holes for mounting flange (92-960.0)
B Holes for LED
C Holes for centering pins
Drilling plan (Elementside)
A Fixing holes for mounting flange (84-960.0)
Pads
C
C
A
B
B
A
A
A
15.24
10.16
6.35
6.35
10.16
15.24
A
BA2
C
C
Ø1.0
Ø2.0
BA1
BC
A
15.24
10.16
6.35
6.35
10.16
15.24
Ø1.0
Ø2.0
2.8
1
10.61 10.61
10.61
10.61
0.8
Ø20.8
Ø2.0
Single-LED Bi-colour-LED
Hyper mini SMD-LED
84
Drawings
33
05.2009
4 Switching element PCB mounting illuminative page 21
Libraries for the PCB layout-system p-cad 200X see : www.pcad.com/en/library Third-party Libraries
Drilling plan (Elementside)
A Fixing holes for mounting flange (92-960.0)
B Holes for LED
C Holes for contact pins
Pad max. Ø 2.5 mm
Through-connection recommended
Drilling plan (Elementside)
A Fixing holes for mounting flange (84-960.0)
Drilling plan (Elementside)
A Fixing holes for mounting flange (92-960.0)
B Holes for Bi-colour LED:
BA1 (green) + BA2 (yellow or red) = Anodes, BK = Cathode
C Holes for contact pins
Pad max. Ø 2.5 mm
Through-connection recommended
A
A
B
C
C
C
C
C
C
C
C
B
Pads
A
A
A
A
BA1 BK
BA2
2.8
1
10.61 10.61
10.61
10.61
0.8
Ø 20.8
15.24
12.7
10.16
5.08
15.24
10.16
Ø1.3
Ø1.0
Ø2.0
15.24
12.7
10.16
5.08
15.24
10.16
Ø1.3
Ø1.0
Ø2.0
Ø2.0
Single-LED Bi-colour-LED
Hyper mini SMD-LED
84
Drawings
34
05.2009
1 Indicator actuator page 9 | Illuminated pushbutton actuator page 9 | Pushbutton actuator page 10 | Indicator actuator with ring illumi-
nation (illuminated bezel) page 10 | Pushbutton actuator with ring illumination (illuminated bezel) page 11 | Indicator actuator with ring
illumination (illuminated multi-colour bezel) page 11 | Pushbutton actuator with ring illumination (illuminated multi-colour bezel) page 12
Hole spacing 31 mm min. by using blind plug 704.960.4
2 Emergency-stop push button, foolproof EN IEC 60947-5-5, complete page 7 | Stop pushbutton grey, complete page 8
3 Illuminated pushb utton actuator page 9 | Pushbutton actuator page 10
Mounting dimensions
84
Drawings
35
05.2009
1 Blind plug page 16
2 Stop pushbutton enclosure page 24
3 Stop pushbutton enclosure page 24
Technical drawing
94
94 81
50
50
79
79
81
94
79
130
50
90
115
50
84
Drawings
36
05.2009
4 Stop pushbutto n enclosure page 24
5 Stop pushbutto n enclosure page 24
180
100
50
120
165
79
94 81
111
180
120
120
182
165
167
50
50
84
Drawings
37
05.2009
6 Stop pushbutton enclosure page 24
7 Legend frame page 15
8 Blind plug page 16
With this print version of the series 84, the panel thickness is reduced to 2.5 mm max.
111
182
180
50 50
50
120
120
167
165
14.5
50
30
23.5
4
Ø25
25
1...5
23.5
2
16.5 min.
20.5 max.
84
Drawings
38
05.2009
9 IIlumination element PCB mounting page 21
10 Mounting flange page 21
11 Emergency-stop enclosures page 24
12 Emergency-stop protective shroud page 23
20
7.14
4.9
R2.2
21.55
0.1
-
+
57
65
50
50
25
65
+
0.3
0
22.3
26
15
1
Ø45
Ø37
84
Drawings
39
05.2009
13 Mounting flange page 21
14 Emergency-stop protective shroud page 23
15 Switching element PCB mounting illuminative page 21
24.5
7.35
6.85
30
0.04
-
+
R2.2
10.8
1.3
1.8
Ø50.2
Ø31.8
22.5
0.1
-
+
84
Drawings
40
05.2009
16 Indicator actuator page 9 | Illuminated pushbutton actuator page 9 | Pushbutton actuator page 10 | Indicator actuator with ring illumi-
nation (illuminated bezel) page 10 | Pushbutton actuator with ring illumination (illuminated bezel) page 11 | Indicator actuator with ring
illumination (illuminated multi-colour bezel) page 11 | Pushbutton actuator with ring illumination (illuminated multi-colour bezel) page 12
17 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop p ushbutton grey, complete page 8
PCB terminal
Flat ribbon cable
Plug-in terminal
Lenses
flush - levelflush - raised
convex - levelconvex - raisedmushroom
25
32
31
6 max.
6 max.
23
4 max.
18 3.6
L = 300
10
-
+
2
4
5
7
9.5
84
Drawings
41
05.2009
18 Illuminated pushbutton actuator page 9 | Pushbutton actuator page 10
19 Housing, pole mounting 35 mm dia. page 25
Please note: The cut-out of the pole must read min. 22 mm dia. and needs to be aligned with the switch!
PCB terminal
Flat ribbon cable
Plug-in terminal
40
21
4 flush - level
16
= 30
3 max.
7
29
L0
10
-
+
convex - level
Ø 4.8
111
31
38.7
Ø 35
50
98
Ø 22.5
84
Drawings
42
05.2009
20 Housing, pole mounting 38 mm dia. page 25
Please note: The cut-out of the pole must read min. 22 mm dia. and needs to be aligned with the switch!
21 Housing, wall mounting page 26
Please note: The cut-out of the wall must read min. 22 mm dia. and needs to be aligned with the switch!
22 Adaptor, reducing to 25 mm dia. page 26
23 Adaptor, reducing to 30 mm dia. page 25
Ø 4.8
110.5
38
31
42.5
Ø 38
98
Ø 22.5
Ø 4.8
110 36
31
31
98
Ø 22.5
111
20.5
98
Ø 4.8
Ø 25
111
20.5
Ø 30
Ø 4.8
98
84
Drawings
43
05.2009
1 Illumination element with Bi-colour illumination page 18
2 Illumination element with Bi-colour illumination page 18
3 Switching element with Bi-colour illumination page 20
4 Illuminated pushbutton actuator page 9 | Pushbutton actuator page 10 | Pushbutton actuator with ring illumination (illuminated bezel)
page 11 | Pushbutton actuator with ring illumination (illuminated multi-colour bezel) page 12
5 Illumination element page 17
6 Switching element non-illuminated page 20
7 Switching element illuminated page 19
8 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop pushbutton grey, complete page 8
Circuit drawing
X3+
24 VDC
X1-
0 V
X2+
+24 VDC
green red or yellow
gb
+24 VDC
bl
0 V
rt
+24 VDC
green red or yellow
gr ye gn
+24 VDC
wt
0 V
bn
+24 VDC
green red or yellow
84
Drawings
44
05.2009
9 Emergency-stop push button, foolproof EN IEC 60947-5-5, complete page 7 | Stop pushbutton grey, complete page 8
10 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop p ushbutton grey, complete page 8
11 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop p ushbutton grey, complete page 8
12 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop p ushbutton grey, complete page 8
13 Emergency-stop pushbutton, foolproof EN IEC 60947-5-5, complete page 7 | Stop p ushbutton grey, complete page 8
14 Switching element PCB mounting illuminative page 21
Index from Typ-Nr.
45
10.2011
Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page
10-2602.3174D .......................... 22
10-2602.3202L ........................... 22
10-2602.3203L ........................... 22
10-2602.3205L ........................... 22
10-2602.3206L ........................... 22
10-2602.3209L ........................... 22
10-2603.320AL .......................... 22
10-2603.320CL .......................... 22
10-5609.3174D .......................... 22
31-929 ........................................ 22
31-929 ........................................ 25
31-946 ........................................ 24
61-9453.0 ................................... 16
61-9481.6 ................................... 24
61-9707.7 ................................... 13
61-9730.0 ................................... 26
61-9980.0 ................................... 15
704.945.1 ................................... 24
704.945.2 ................................... 24
704.945.3 ................................... 24
704.945.4 ................................... 24
704.945.5 ................................... 24
704.945.6 ................................... 24
704.963.0 ................................... 23
704.963.1 ................................... 23
704.963.2 ................................... 23
704.963.3 ................................... 23
704.963.5 ................................... 23
704.963.6 ................................... 23
704.963.7 ................................... 23
704.963.8 ................................... 23
704.964.8 ................................... 16
704.968.0 ................................... 16
704.968.1 ................................... 16
84-0080.7 ................................... 11
84-0090.7 ................................... 10
84-0100.0 ..................................... 9
84-0200.7 ..................................... 9
84-1081.7 ................................... 12
84-1091.7 ................................... 11
84-1101.0 ................................... 10
84-1101.0 ..................................... 9
84-1201.0 ................................... 10
84-1201.0 ..................................... 9
84-1201.2 ................................... 10
84-1201.2 ..................................... 9
84-1201.4 ................................... 10
84-1201.4 ..................................... 9
84-1201.5 ................................... 10
84-1201.5 ..................................... 9
84-1201.6 ................................... 10
84-1201.6 ..................................... 9
84-1201.7 ................................... 10
84-1201.7 ..................................... 9
84-1221.7 ................................... 10
84-1221.7 ..................................... 9
84-2101.0 ................................... 10
84-2101.0 ..................................... 9
84-3100.0 ..................................... 9
84-5020.0020 ............................... 7
84-5020.0040 ............................... 7
84-5021.2B20 .............................. 7
84-5021.2B40 .............................. 7
84-5030.0020 ............................... 7
84-5030.0040 ............................... 7
84-5031.2B20 ............................... 7
84-5031.2B40 ............................... 7
84-5040.0020 ............................... 7
84-5040.0040 ............................... 7
84-5041.2B20 ............................... 7
84-5041.2B40 ............................... 7
84-5120.0020 ............................... 7
84-5120.0040 ............................... 7
84-5121.2B20 ............................... 7
84-5121.2B40 ............................... 7
84-5130.0020 ............................... 7
84-5130.0040 ............................... 7
84-5131.2B20 ............................... 7
84-5131.2B40 ............................... 7
84-5140.0020 ............................... 7
84-5140.0040 ............................... 7
84-5141.2B20 ............................... 7
84-5141.2B40 ............................... 7
84-6820.0020 ............................... 8
84-6820.0040 ............................... 8
84-6821.2B20 ............................... 8
84-6821.2B40 ............................... 8
84-6830.0020 ............................... 8
84-6830.0040 ............................... 8
84-6831.2B20 ............................... 8
84-6831.2B40 ............................... 8
84-6840.0020 ............................... 8
84-6840.0040 ............................... 8
84-6841.2B20 ............................... 8
84-6841.2B40 ............................... 8
84-7111.200 ............................... 13
84-7111.201 ............................... 13
84-7111.202 ............................... 13
84-7111.203 ............................... 13
84-7111.300 ............................... 13
84-7111.301 ............................... 13
84-7111.400 ............................... 13
84-7111.401 ............................... 13
84-7111.500 ............................... 13
84-7111.501 ............................... 13
84-7111.502 ............................... 13
84-7111.503 ............................... 13
84-7111.600 ............................... 13
84-7111.601 ............................... 13
84-7111.602 ............................... 13
84-7111.603 ............................... 13
84-7111.700 ............................... 13
84-7111.701 ............................... 13
84-7111.702 ............................... 13
84-7111.703 ............................... 13
84-7114.600A ............................. 15
84-7115.200 ............................... 13
84-7115.300 ............................... 13
84-7115.400 ............................... 13
84-7115.500 ............................... 13
84-7115.600 ............................... 13
84-7115.700 ............................... 13
84-7121.000 ............................... 13
84-7121.800 ............................... 13
84-7124.000A ............................. 15
84-7124.200A ............................. 15
84-7124.400A .............................15
84-7124.500A .............................15
84-7124.600A .............................15
84-7125.000 ............................... 13
84-7125.800 ............................... 13
84-7201.000 ............................... 14
84-7201.200 ............................... 14
84-7201.400 ............................... 14
84-7201.500 ............................... 14
84-7201.600 ............................... 14
84-7201.800 ............................... 14
84-7202.000 ............................... 14
84-7202.000A .............................14
84-7202.200 ............................... 14
84-7202.200A .............................14
84-7202.400 ............................... 14
84-7202.400A .............................14
84-7202.500 ............................... 14
84-7202.500B .............................14
84-7202.600 ............................... 14
84-7202.600A .............................14
84-7202.800 ............................... 14
84-7202.800A .............................14
84-7205.000 ............................... 14
84-7205.000A .............................14
84-7205.200 ............................... 14
84-7205.200A .............................14
84-7205.400 ............................... 14
84-7205.400A .............................14
84-7205.500 ............................... 14
84-7205.500A .............................14
84-7205.600 ............................... 14
84-7205.600A .............................14
84-7205.800 ............................... 14
84-7205.800A .............................14
84-7211.000 ............................... 15
84-7211.200 ............................... 15
84-7211.400 ............................... 15
84-7211.500 ............................... 15
84-7211.600 ............................... 15
84-7211.800 ............................... 15
84-7215.000 ............................... 15
84-7215.200 ............................... 15
84-7215.400 ............................... 15
84-7215.500 ............................... 15
84-7215.600 ............................... 15
84-7215.800 ............................... 15
84-8001.2320 .............................17
84-8001.2340 .............................17
84-8001.2620 .............................17
84-8001.2640 .............................17
84-8001.3320 .............................17
84-8001.3340 .............................17
84-8001.3620 .............................17
84-8001.3640 .............................17
84-8001.4320 .............................17
84-8001.4340 .............................17
84-8001.4620 .............................17
84-8001.4640 .............................17
84-8001.5320 .............................17
84-8001.5340 .............................17
84-8001.5620 .............................17
84-8001.5640 .............................17
Index from Typ-Nr.
46
10.2011
Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page
84-8001.6320 .............................17
84-8001.6340 .............................17
84-8001.6620 .............................17
84-8001.6640 .............................17
84-8001.9320 .............................17
84-8001.9340 .............................17
84-8001.9620 .............................17
84-8001.9640 .............................17
84-8005.7620 .............................18
84-8005.7640 .............................18
84-8005.8620 .............................18
84-8005.8640 .............................18
84-8510.0020 .............................20
84-8510.0040 .............................20
84-8511.2320 .............................19
84-8511.2340 .............................19
84-8511.2620 .............................19
84-8511.2640 .............................19
84-8511.3320 .............................19
84-8511.3340 .............................19
84-8511.3620 .............................19
84-8511.3640 .............................19
84-8511.4320 .............................19
84-8511.4340 .............................19
84-8511.4620 .............................19
84-8511.4640 .............................19
84-8511.5320 .............................19
84-8511.5340 .............................19
84-8511.5620 .............................19
84-8511.5640 .............................19
84-8511.6320 .............................19
84-8511.6340 .............................19
84-8511.6620 .............................19
84-8511.6640 .............................19
84-8511.9320 .............................19
84-8511.9340 .............................19
84-8511.9620 .............................19
84-8511.9640 .............................19
84-8515.7640 .............................20
84-8515.8640 .............................20
84-900 ........................................22
84-902 ........................................23
84-902A ......................................23
84-902B ......................................23
84-902D ......................................23
84-905 ........................................23
84-908 ........................................23
84-909 ........................................23
84-910 ........................................24
84-9103.7 ...................................15
84-9300.4 ...................................26
84-9300.8 ...................................26
84-9420 ......................................21
84-9500.4 ...................................25
84-9500.6A .................................25
84-9500.8 ...................................25
84-960.0 .....................................21
84-9600.4 ...................................25
84-9600.8 ...................................25
84-9700.4 ...................................25
84-9700.8 ...................................25
84-9800.4 ...................................26
84-9800.8 ...................................26
84-996 ........................................26
84-997 ........................................26
84-998 ........................................26
92-800.042 .................................21
92-851.342 .................................21
92-960.0 .....................................21
EAO AG
Tannwaldstrasse 88
4601 Olten, Switzerland
E-mail info@eao.com
Website www.eao.com
Austria
Phone +49 201 85 87 0
Fax +49 201 85 87 210
E-mail sales.ede@eao.com
Belgium
Phone +32 3 777 82 36
Fax +32 3 777 84 19
E-mail sales.ebl@eao.com
China
Phone +852 27 86 91 41
Fax +852 27 86 95 61
E-mail sales.ehk@eao.com
France
Phone +33 1 64 43 37 37
Fax +33 1 64 43 37 49
E-mail sales.ese@eao.com
Germany
Phone +49 201 85 87 0
Fax +49 201 85 87 210
E-mail sales.ede@eao.com
Italy
Phone +39 035 481 0189
Fax +39 035 481 3786
E-mail sales.eit@eao.com
Japan
Phone +81 3 5444 5411
Fax +81 3 5444 0345
E-mail sales.esj@eao.com
Netherlands
Phone +31 78 653 17 00
Fax +31 78 653 17 99
E-mail sales.enl@eao.com
Sweden
Phone +46 8 683 86 60
Fax +46 8 724 29 12
E-mail sales.esw@eao.com
Switzerland
Phone +41 62 388 95 00
Fax +41 62 388 95 55
E-mail sales.ech@eao.com
United Kingdom
Phone +44 1444 236 000
Fax +44 1444 236 641
E-mail sales.euk@eao.com
USA
Phone +1 203 877 4577
Fax +1 203 877 3694
E-mail sales.eus@eao.com
Other Countries
Phone +41 62 286 92 10
Fax +41 62 296 21 62
E-mail info@eao.com
EAO reserves the right to alter specifications without further notice
