IAA170P Integrated Circuits Load Voltage Load Current Max RON IAA170P 350 100 50 Description The IAA170P multifunction switch combines 350V, 100mA, 50 relay(s) and optocoupler(s) into a single package. Various combinations are available depending on the part number. This switch provides an ideal way to consolidate functionality into a single package. Units V mA Features * Three Functions in One Package * Small 16 Pin SOIC Package (PCMCIA Compatible) * Bi-Directional Current Sensing * Bi-Directional Current Switching * Replaces up to Three or Four Components * 3750VRMS Input/Output Isolation * FCC Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * Tape & Reel Versions Available * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-12 * VDE Compatible * BSI Certified: * BS EN 60950:1992 (BS7002:1992) Certificate #:7969 * BS EN 41003:1993 Certificate #:7969 Ordering Information Part # IAA170P IAA170PTR Description 16 Pin SOIC (50/Tube) 16 Pin SOIC (1000/Reel) Pin Configuration IAA170P Pinout (N/C) 1 16 2 15 (Form A) 10ms CONTROL (N/C) 3 14 4 13 5 12 (Form A) 6 11 7 10 8 9 1. (N/C) 2. + LED - Form A Relay #1 3. - LED - Form A Relay #1 4. + LED - Form A Relay #2 5. - LED - Form A Relay #2 6. Emitter - Phototransistor 7. Collector - Phototransistor 8. (N/C) 9. LED - Phototransistor +/- 10. LED - Phototransistor -/+ 11. Output - Form A Relay #2 12. Common Source Relay #2 13. Output - Form A Relay #2 14. Output - Form A Relay #1 15. Common Source Relay #1 16. Output - Form A Relay #1 DS-IAA170P-R1 Switching Characteristics of Normally Closed (Form B) Devices www.clare.com 90% + + 90% +10% TON TOFF Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON TOFF 1 IAA170P Absolute Maximum Ratings (@ 25 C) Parameter Min - - 11 3750 - - VRMS Operational Temperature -40 - +85 C Storage Temperature -40 - +125 C - - +220 C Total Package Dissipation Isolation Voltage Input to Output Soldering Temperature (10 Seconds Max.) 1 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units W Above 25 derate linerity 1.67mw/C Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units - VL - - 350 V Relay Portion Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) Peak Load Current On-Resistance Off-State Leakage Current - IL - - 100 mA 10ms ILPK - - 350 mA IL=100mA RON - - 50 VL=350V; TJ=25C ILEAK - - 1 A Switching Speeds Turn-On Turn-Off IF=5mA, VL=10V IF=5mA, VL=10V TON TOFF - - 5 5 ms ms Output Capacitance VL=50V, f=1MHz - - 25 - pF Relay Portion Input Characteristics @ 25C Input Control Current IL=100mA IF 5 - 50 mA Input Dropout Current IL=1mA IF 0.4 - - mA Input Voltage Drop IF=5mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 A Detector Portion Output Characteristics @ 25C Phototransistor Blocking Voltage IC=10A BVCEO 20 50 - V VCE=5V, IF=0mA ICEO - 50 500 nA Saturation Voltage IC=2mA, IF=16mA VSAT - 0.3 0.5 V Current Transfer Ratio IF=6mA, VCE=0.5V CTR 33 - - % IC=2mA,VCE=0.5V IF 6 2 - mA Phototransistor Dark Current Detector Portion Input Characteristics @ 25C Input Control Current Input Voltage Drop IF=5mA ICEO 0.9 1.2 1.4 V Input Current (Detector must be off) IC=1A, VCE=5V - 5 25 - A Input to Output Capacitance VL=50V, f=1MHz CI/O - 3 - pF - VI/O 3750 - - VRMS Input to Output Isolation 2 www.clare.com Rev. 1 IAA170P PERFORMANCE DATA* IAA170P Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 35 Device Count (N) 25 20 15 10 5 25 25 20 20 15 10 5 0 0 1.17 1.19 1.21 1.23 1.25 0 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (V) IAA170P Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 25 20 20 20 10 5 0 Device Count (N) 25 Device Count (N) Device Count (N) 5 IAA170P Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 15 15 10 5 0.50 0.56 0.62 0.69 0.75 0.81 0.44 0.50 LED Current (mA) Load Current (mA) 20 15 10 5 0.56 0.62 0.69 0.75 0.67 0.81 0.22 160 0.016 140 0.014 120 0.012 100 80 10mA 5mA 2mA 60 40 0.25 0 20 40 60 80 100 120 -40 440 435 430 1.20 1.00 10mA 0.80 20mA 0.60 0.40 425 0.20 420 0 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 80 100 120 Temperature (C) Turn-Off (ms) Turn-On (ms) 445 20 0 20 40 60 80 100 IAA170P Typical Turn-Off vs. Temperature (Load Current = 120mADC) 1.40 0 -20 Temperature (C) 5mA 1.60 -20 0.006 0 -20 1.80 450 1.14 0.008 IAA170P Typical Turn-On vs. Temperature (Load Current = 100mADC) 455 1.06 0.010 Temperature (C) IAA170P Typical Blocking Voltage vs. Temperature 0.99 0.002 -40 0.28 0.91 0.004 Turn-Off (ms) -40 0.83 IAA170P Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0 0 0.19 0.75 Turn-On (ms) 20 0.17 5 IAA170P Typical Load Current vs. Temperature 25 0.14 10 LED Current (mA) IAA170P Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 0.11 15 0 0 0.44 Device Count (N) 10 On-Resistance () IAA170P Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) Blocking Voltage (VRMS) 15 29.09 29.86 30.63 31.40 32.16 32.93 33.70 LED Forward Voltage Drop (V) Leakage (A) Device Count (N) 30 IAA170P Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) Device Count (N) IAA170P Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1 www.clare.com 3 IAA170P PERFORMANCE DATA* 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 Temperature (C) 25 30 35 40 45 0 50 6.0 5.0 5.0 50 40 30 20 4.0 3.0 2.0 10 1.0 0 0 20 40 60 80 LED Current (mA) 6.0 0 -40 100 120 -2 -1 0 1 2 3 4 -20 0 20 40 60 80 30 35 40 45 50 2.0 0 100 120 -40 -20 0 20 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 40 60 80 100 120 Temperature (C) IAA170P Typical Normalized CTR vs Forward Current (VCE = 0.5V) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 10s 100s 1s Load Voltage (V) Time IAA170P Typical Normalized CTR vs. Temperature (VCE = 0.5V) IAA170P Typical Collector Current vs Forward Current (VCE = 0.5V) 8 25 3.0 IAA170P Energy Rating Curve Load Current (A) 100 80 60 40 20 0 -20 -40 -60 -80 -100 20 4.0 Temperature (C) IAA170P Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC -3 15 1.0 Temperature (C) -4 10 IAA170P Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 60 -20 5 LED Forward Current (mA) 70 -40 Load Current (mA) 20 IAA170P Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) LED Current (mA) On-Resistance () 15 LED Forward Current (mA) IAA170P Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mADC) 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) 12 7 10 6 8 5 IC (mA) Normalized CTR (%) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Turn-Off (ms) Turn-On (ms) 1.6 Normalized CTR (%) LED Forward Voltage Drop (V) 1.8 1.4 IAA170P Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) IAA170P Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) IAA170P Typical LED Forward Voltage Drop vs. Temperature 4 3 2 1 0 -40 -20 0 20 40 60 Temperature (C) 1mA 2mA 5mA 10mA 15mA 20mA 80 100 120 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 1 IAA170P Mechanical Dimensions 16 Pin SOIC ("P" Suffix) 1.981 TYP. (.078) 2.108 MAX. (.083) 1.270 TYP. (.050) 7.493 .051 (.295 .002) 1.016 (.040) PC Board Pattern (Top View) 10.160 .051 (.400 .002) 7.493 .127 (.295 .005) 1.270 (.050) 10.363 .127 (.408 .005) 9.728 .051 (.383 .002) .254 (.010) 1.193 (.047) .406 TYP. (.016) 8.890 TYP. (.350) .787 (.031) Tape and Reel Packaging for 16 Pin SOIC Package 330.2 DIA. (13.00) 6.731 MAX. (.265) Top Cover Tape Thickness .102 MAX. (.004) 1.753 .102 (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 16 10.693 .025 (.421 .001) 12.090 (.476) 3.175 (.125) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.897 .025 (.429 .001) 1.549 .102 (.061 .004) User Direction of Feed Embossment Dimensions mm (inches) Rev. 1 www.clare.com 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-IAA170P-R1.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02