Bulletin I27145 rev. B 06/02 MTP 3-Phase Rectifier Series Power Module THREE PHASE BRIDGE Features Low VF Low profile package Direct Mounting to heatsink Flat-Pin/ Round-Pin versions with PCB solderable terminals Low junction-to-case Thermal Resistance 3500 VRMS insulation voltage UL approval pending 45 A 75 A 100 A Applications: Power conversion machines Welding UPS SMPS Motor Drives General Purpose & Heavy Duty Applications Description A range of extremely compact three-phase rectifier bridges offering efficient and reliable operation. The low profile package has been specifically conceived to maximize space saving and optimize the electrical layout of the application specific Power Supplies. Major Ratings and Characteristics Parameters IO 40MT 70MT 100MT Units 45 75 100 A 100 80 80 C IFSM @ 50Hz 270 380 450 A @ 60Hz 280 398 470 @ 50Hz 365 724 1013 @ 60Hz 325 660 920 3650 7240 10130 @ TC 2 I t 2 I t VRRM A2s A2s 1400 & 1600 V TSTG range - 40 to 125 C TJ - 40 to 150 range www.irf.com MT...PA MT...PB 1 MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Code reverse voltage V VRRM, maximum repetitive peak reverse voltage V VRSM, maximum non-repetitive peak @ TJ = 150C V mA 40-70-100MT140P 140 1400 1500 5 40-70-100MT160P 160 1600 1700 Type number IRRM max. Forward Conduction 40MT 70MT 100MT IO Maximum DC output current @ Case temperature Parameter 45 100 75 80 100 80 A C 120 Rect conduction angle IFSM Maximum peak, one-cycle 270 380 450 A t = 10ms forward, non-repetitive 280 398 470 t = 8.3ms reapplied on state surge current 225 320 380 t = 10ms 100% VRRM 240 335 400 365 325 724 660 1013 920 253 512 240 467 I2t Maximum I2 t for fusing Units Conditions No voltage t = 8.3ms reapplied t = 10ms t = 8.3ms No voltage reapplied 600 t = 10ms 100% VRRM 665 t = 8.3ms reapplied A2s I2t Maximum I2t for fusing 3650 7240 10130 A2s VF(TO) Value of threshold voltage 0.78 0.82 0.75 V rt Slope resistance 14.8 9.5 8.1 m VFM Maximum forward voltage drop 1.45 Ipk = 40A 1.45 Ipk = 70A 1.51 Ipk = 100A V 40MT 70MT 100MT Initial TJ = TJ max. t = 0.1 to 10ms, no voltage reapplied @ TJ max. TJ = 25C tp = 400s single junction Insulation Table Parameter VINS RMS insulation voltage 3500 Units Conditions V TJ = 25oC all terminal shorted f = 50Hz, t = 1s 2 www.irf.com MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Thermal and Mechanical Specifications Parameter TJ 40MT 70MT Maximum junction operating 100MT Units Conditions - 40 to 150 C -40 to 125 C temperature range Tstg Maximum storage temperature range RthJC Maximum thermal resistance, 0.27 0.23 0.19 1.6 1.38 1.14 DC operation per junction 0.38 0.29 0.22 120 Rect condunction angle per module 2.25 1.76 1.29 junction to case RthCS Maximum thermal resistance, K/W DC operation per module 120 Rect condunction angle per junction 0.1 K/W 4 Nm 65 g Per module. Mounting surface smooth, flat and greased. Heatsink compound thermal conductivity = 0.42W/mK case to heatsink T Mounting torque 10% A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads. to heatsink wt Approximate weight Clearance and Creepage Distances Parameter MT...PA MT...PB Units Clearance (external shortest distance in air between terminals which are not internally short circuited together) 10.9 12.3 mm Creepage distance (shortest distance along external surface of the insulating material between terminals which are not internally short circuited together) 10.9 12.3 mm Ordering Information Table Device Code www.irf.com 10 0 1 2 MT 160 3 4 P B 5 4 = 45A 7 = 75A 10 = 100A 1 - Current rating code 2 - Circuit configuration code: 0 = 3-Phase Rectifier Bridge 3 - Essential part number 4 - Voltage code: code x 10 = VRRM (See Voltage Ratings table) A = Flat pins 5 - Pinout code: B = Round pins 3 MTP 3-Phase Rectifier Series Bulletin I27145 rev. B 06/02 Outline Table MT...PA (Flat pin) Dimensions in millimeters MT...PB (Round pin) Dimensions in millimeters 4 www.irf.com MTP 3-Phase Rectifier Series 160 Instantaneous On-state Current (A) 150 140 130 120 120 (Rect) 110 100 90 Tj = 25C Tj = 150C 100 10 40MT...P 1 80 0 Peak Half Sine Wave On-state Current (A) 1000 40MT...P R thJC (DC) = 0.27 K/W Per Module 10 20 30 40 0 50 1 2 3 4 5 6 Total Output Current (A) Instantaneous On-state Voltage (V) Fig. 1 - Current Rating Characteristics Fig. 2 - On-state Voltage Drop Characteristics 250 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 200 150 100 40MT...P Per Junction 50 1 10 300 Peak Half Sine Wave On-state Current (A) Maximum Allowable Case Temperature (C) Bulletin I27145 rev. B 06/02 250 200 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 150C No Voltage Reapplied Rated V rrm Reapplied 150 100 40MT...P Per Junction 50 0.01 100 0.1 1 Pulse Train Duration(s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 3 - Maximum Non-Repetitive Surge Current Fig. 4 - Maximum Non-Repetitive Surge Current 40MT...P Tj = 150C 1 0. W K/ a elt -D R 120 (Rect) 150 0. 2 K/ 0. W 3 K/ 0.5 W K/ W 0.4 K/ W = 200 A hS Rt Maximum Total Power Loss (W) 250 1K /W 100 50 0 0 10 20 30 40 50 Total Output Current (A) 0 30 60 90 120 150 60 Maximum Allowable Ambient Temperature (C) Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink) www.irf.com 5 MTP 3-Phase Rectifier Series 160 1000 70MT...P R thJC(DC) = 0.23 K/W Per Module 150 140 Instantaneous On-state Current (A) Maximum Allowable Case Temperature (C) Bulletin I27145 rev. B 06/02 130 120 110 120 (Rect) 100 90 80 70 Tj = 25C Tj = 150C 100 10 70MT...P 60 1 0 10 20 30 40 50 60 70 80 0 Total Output Current (A) At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 300 250 200 150 70MT...P Per Junction 100 1 10 2 3 4 5 Fig. 7 - On-state Voltage Drop Characteristics Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Fig. 6 - Current Rating Characteristics 350 1 Instantaneous On-state Voltage (V) 400 350 300 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T j = 150C No Voltage Reapplied Rated V rrm Reapplied 250 200 150 70MT...P Per Junction 100 50 0.01 100 0.1 1 Pulse Train Duration(s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 8 - Maximum Non-Repetitive Surge Current Fig. 9 - Maximum Non-Repetitive Surge Current 70MT...P 0. 2 R 120 (Rect) 150 a elt -D 200 W K/ K/ W 0.3 K/ W 0.4 K/W 0.5 K/W 1 0. Tj = 150C = 250 A hS Rt Maximum Total Power Loss (W) 300 1K /W 100 50 0 0 20 40 60 Total Output Current (A) 0 80 30 60 90 120 150 Maximum Allowable Ambient Temperature (C) Fig. 10 - Current Rating Nomogram (1 Module Per Heatsink) 6 www.irf.com MTP 3-Phase Rectifier Series 1000 140 100MT...P R thJC (DC) = 0.19 K/W 120 Instantaneous On-state Current (A) Maximum Allowable Case Temperature (C) Bulletin I27145 rev. B 06/02 Per Module 100 80 120 (Rect) 60 100MT...P 100 10 Tj = 150C Tj = 25C 1 0.5 40 40 50 60 70 80 90 100 110 120 130 Total Output Current (A) At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 350 300 250 200 100MT...P Per Junction 150 100 1 10 1.5 2 2.5 3 3.5 4 Fig. 12 - On-state Voltage Drop Characteristics Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) Fig. 11 - Current Rating Characteristics 400 1 Instantaneous On-state Voltage (V) 100 500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 400 Initial T j = 125C No Voltage Reapplied 350 Rated V rrm Reapplied 450 300 250 200 150 100 50 100MT...P Per Junction 0 0.01 0.1 1 10 Pulse Train Duration(s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 14 - Maximum Non-Repetitive Surge Current Fig. 13 - Maximum Non-Repetitive Surge Current Maximum Total Power Loss (W) 500 Rt hS 0.0 A = 5K 0 .0 0.1 /W 25 K/ K/ W W 100MT...P Tj = 150C 400 300 120 (Rect) 200 0.2 K/W 0.3 K/W -D elt a R 0.5 K/W 1 K/W 100 0 0 20 40 60 80 Total Output Current (A) 0 30 60 90 120 150 100 Maximum Allowable Ambient Temperature (C) Fig. 15 - Current Rating Nomogram (1 Module Per Heatsink) www.irf.com 7 MTP 3-Phase Rectifier Series Transient Thermal Impedance Z thJC (K/W) Bulletin I27145 rev. B 06/02 10 Steady State Value RthJC per junction = 1.6 K/W (40MT...P) 1 1.38 K/W (70MT...P 1.14 K/W (100MT...P) 40MT...P 70MT...P 100MT...P DC Operation) 0.1 0.01 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 16 - Thermal Impedance Z thJC Characteristics Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/02 8 www.irf.com