SIM card 8-pin Super low profile H=1.5 Push-lock push-eject connector Product NameFMS008-6001-0 Feature Push-lock push-eject type Super low profile H=1.5 Top mount Card mis-insertion prevention design Card detection switch integrated EMI prevention design RoHS compliant Pb-free soldering capable Packing Quantity 1,000pcs/ Tape and Reel Material & Plating Product Name Metal Shell Cover Ejector Lock Pin Coil Spring Insulator Contact Detection Switch Specification Current Rating Voltage Rating Insulation Resistance Withstanding Voltage Contact Resistance Operating Temperature Durability 0.5A 5V AC rms 1000M Minimum at 500V DC 500V AC rms 1 minute at 1mA/20mV Contact Initial value100m Max. Finished test40m Max. Switch Initial value200m Max. Finished test80m Max. -55 +85 5,000cycles Material & Plating SUS, Ni-Au Heat Resistance Plastic SUS SUS Heat Resistance Plastic Copper Alloy, Ni-Au Copper Alloy, Ni-Au Recommended Foot Pattern Soldering tub pad Connector outline Outline Dimension Terminal pad Tolerance 0.05 unless specified Indicates pattern prohibited area. Indicates pattern exposure prohibited area. Please request latest drawing and specification when this P/N is considered to adopt. InquiryYamaichi Electronics Co.,Ltd. CS Business Planning Section TEL 03-3778-6160 w FAX 03-3778-6177 Specification in this document is as for reference on representative p/n of each series and may change without prior notice. Since product improvement entails changes to electrical, material and mechanical properties, the purchasing party is strongly recommended to inquire the latest specification before placing purchase order. All other service, product and company names mentioned herein are the trademark or registered trademarks of their respective owners. Issued: 2009 Aug. w Rev.A