AT-4003-A - AMPROBE INSTRUMENTS

Quickly trace energized and non-energized wires effortlessly with the

Amprobe AT-4000-A Wire Tracer Series. Out-performing other wire

tracers in its class, these advanced tracers combine features and functions

to make locating wires more accurate and your job more efﬁcient.

AT-4001-A Advanced Wire Tracer with Soft Case

AT-4003-A Advanced Wire Tracer

AT-4004-A Advanced Wire Tracer with Clamp-On Attachment

AT-4005-A Advanced Wire Tracer with Clamp-On

Attachment, Battery Booster & Charger

AT-4000-A

Advanced Wire Tracer Series

www.Amprobe.com

Advanced in Wire Tracing Technology

AT-4000-A SPECIFICATIONS

Speciﬁcations AT-4001-A AT-4003-A AT-4004-A AT-4005-A

Transmitter operating voltage 9 - 300 V ac

Operating frequency 32.786kHz

Receiver short mode range 6.01m (20’) in air from the traced wire under test conditions

Receiver open mode range 3.7m (12’) in air from the traced wire under test conditions

Receiver R-4000 ■ ■ ■ ■

Transmitter T-4000-A ■ ■ ■ ■

110V Pigtail - banana plug cord set C2901 ■ ■ ■ ■

Alligator clip – banana plug cord set C2902 ■ ■ ■ ■

Grounding test lead 25’ (7.6 m) MTL-G ■ ■ ■ ■

Alligator clip for ground lead VRC-320 ■ ■ ■ ■

Clamp-on transmitter accessory A2202 ■ ■

Rechargeable battery pack B2024 ■

Battery pack recharger B2025 ■

Users manual ■ ■ ■ ■

Carrying case Soft SV-1000 Hard CC-AT-4000 Hard CC-AT-4000 Hard CC-AT-4000

For more detailed speciﬁcations see users manual.

• Determines presence of energized or non-

energized wires hidden behind walls, ﬂooring

or conduit

• Pinpoints wires, breakers, neutrals, shorts,

broken wires and ground lines

• Operates safely and easily without interrupting

power or interfering with sensitive electronic

equipment

• Get accurate readings without rotating the unit

– receiver is not position sensitive

• Clamp-on attachment injects signal for non-

contact operation (AT-4004-A and AT-4005-A

only)

• Optional Battery Booster accessory strengthens

signal for open tracing (AT-4005-A only)

For detailed speciﬁcations and ordering info go to www.Amprobe.com 6001562 A

R-4000 T-4000-A

AT-4005-A

www.Amprobe.com

AT-4000-A DETAILED SPECIFICATIONS

Speciﬁcations Range

Transmitter operating voltage 9 - 300 V ac

Operating frequency 32.786 kHz

Receiver range short mode (in air) 6.01m (20’) in air from the traced wire under test conditions

Receiver range open mode (in air) 3.7m (12’) in air from the traced wire under test conditions

Operating temperature -18°C to 49°C (0 to 120°F)

Storage temperature -40° to 66°C (-40° to 150°F)

Case material ABS

Case size 14 x 6.7mm (0.55” x 0.26”)

Weight (AT-4005-A) 3.72 kg (8.2lbs)

R-4000 Receiver

Detectors Electromagnetic Coil Array pick up for short mode. Electrostatic plate pick up for open mode.

Sensitivity Low, mid, and high gain with precise sensitivity adjustment

Short mode performance Over 6.01m (20’) in air from the traced wire under test conditions.

Open mode performance Over 3.7m (12’) from the traced wire in air under test conditions.

50HZ, 60HZ, and 400HZ rejection 120db

Power source 9V alkaline battery

Display 10 LEDs

Case Flame retardant ABS

Weight 143.5 g (0.32 lbs)

T-4000-A Transmitter

Operating voltage 9 - 300 V

Operating frequency 32.768 KHZ

Duty cycle Transmit 2 pulses with a duration of 0.0625 seconds each, every 0.5 seconds

Case Flame retardant ABS

Display LCD

Weight 143.5 g (0.32 lbs)

Current output of the signal

Low mode: 11 mA average, 30 mA peak

Medium mode: 12 mA average, 36 mA peak

High mode: 13 mA average, 63 mA peak

Fuse Fast acting 250 mA @ 1000V (6X46mm) P/N: FA6X46MM

Signal output (9v supply) High setting: 0.74 V ac; Medium setting: 0.61 V ac; Low setting: 0.53 V ac

Battery 9V alkaline- 24 V jack will accept battery pack accessory (B2024 or B2025)

A2202 Clamp-on Transmitter Accessory

Operating frequency 32.768KHZ as supplied by T-4000

Case breakdown voltage 3000 V

Maximum wire size 2000 MCM or 5.08cm (2") diameter

T-4000-A B2024 Battery Pack

Type Nickel-cadmium rechargeable (20 AA cells)

Capacity 24 V, 600 mah

Rechargeable time 14 hours

Fuse Internal, self-resetting

B2025 Recharger / Converter

Input 115 V ac

Output 24 V dc @ 350 mah

For complete speciﬁcations please download the product datasheet and the users manual on www.Amprobe.com.

Amprobe®

info@amprobe.com

Everett, WA 98203

Tel: 877-AMPROBE (267-7623)

Amprobe® Europe

In den Engematten 14,

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

For detailed speciﬁcations and ordering info go to www.Amprobe.com 6001562 A