Feedthroughs
4-75
Catalog 1654025 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 12-04 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Japan: 81-44-900-5102
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Singapore: 65-4866-151
www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-1793-528171
4
Molded Parts
207W213 to 256
Applications
Use for strain relief and
abrasion protection when
cables pass through equip-
ment boxes or panels.
J Dia.
SU
J Dia.
Slight taper
JW
H
M
JO
Tan
B nut (-01 modification)
A nut (standard)
207W213 to 256
SU
J Dia.
Slight taper
JW
H
M
JO
Tan
B nut (-01 modification)
A nut (standard)
207W213 to 256
J Dia.
SU
J Dia.
Slight taper
JW
H
M
JO
Tan
B nut (-01 modification)
A nut (standard)
207W213 to 256
Material Dash Number Material Description Precoating No. Adhesive PartNo.
-3 Semirigid polyolefin /42 or /86 S-1017 or S-1048
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Viton®N/A S-1255-04
-25 Fluid-resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
*For more information, please see the appropriate material page in this section.
**For more information, please see section 5.
AsSupplied (a)
After Unrestricted Recovery (b)
J
Part H Min. JO M P R S U JW Hole
No. Ref. -3, -4, -12, -100 Max. Max. Thread ±10% ±10% ±10% ±10% ±20% Dia.
b-25 abbb b b b b b ±.51 [.02]
a
207W213 11.9 [.47] 9.9 [.39] 8.5 [.33] 4.1 [.16] 15.2 [.60] 20.1 [.79] 62.0 [2.44] 49.0 [1.93] 13.0 [.51] 9.9 [.39] 1.3 [.05] 23.9 [.94]
207W223 20.1 [.79] 18.0 [.71] 16.5 [.65] 7.1 [.28] 19.3 [.76] 30.0 [1.18] 71.9 [2.83] 58.9 [2.32] 16.0 [.63] 9.9 [.39] 1.8 [.07] 34.0 [1.34]
207W234 30.1 [1.22] 27.9 [1.10] 26.5 [1.04] 11.9 [.47] 26.9 [1.06] 41.9 [1.65] 87.1 [3.43] 73.9 [2.91] 18.0 [.71] 9.9 [.39] 2.03 [.08] 47.0 [1.85]
207W245 45.0 [1.77] 41.9 [1.65] 40.5 [1.59] 18.0 [.71] 32.0 [1.26] 55.9 [2.20] 102.1 [4.02] 88.9 [3.50] 18.0 [.71] 9.9 [.39] 3.05 [.12] 60.5 [2.38]
207W256 68.1 [2.68] 64.0 [2.52] 64.5 [2.54] 30.0 [1.18] 39.1 [1.54] 80.0 [3.15] 121.9 [4.80] 109.0 [4.29] 18.0 [.71] 9.9 [.39] 3.05 [.12] 85.1 [3.35]
Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max.
Two-Part Feedthrough
Materials Available
Product Dimensions
VITON is a trademark of DuPont
Performance Elastomers
