Rev. 1.2 July 2009 www.aosmd.com Page 1 of 7
AOZ8045
6-Line EMI Filter with Integrated ESD Protection
General Description
The AOZ8045 is a 6-line device integrating EMI filtering
with ESD protection for each line. It is designed to
suppress unwanted EMI/RFI signals and provide electro-
static discharge (ESD) protection in portable electronic
equipment. This state-of-the-art device utilizes AOS
leading edge Trench Vertical Structure [TVS]2 ™
technology for superior clamping performance and filter
attenuation over the full operating display range. The
AOZ8045 has been optimized for protection of color LCD
displays and CCD camera lines in cellular phones and
other portable consumer electronic devices.
The AOZ8045 consists of six identical circuits
comprised of TVS diodes for ESD protection, and a
resistor–capacitor network for EMI/RFI filtering.
A series resistor value of 100Ω and a capacitance
value of 9pF are used to achieve -20dB minimum
attenuation from 1.0GHz to 3.0GHz. The TVS diodes
provide effective suppression of ESD voltages in excess
of ±20kV (contact discharge) and ±20kV (air discharge).
This exceeds IEC 61000-4-2, level 4 ESD immunity test.
The AOZ8045 comes in an RoHS compliant, 2.50mm x
1.20mm DFN package and is rated over a -40°C to
+85°C ambient temperature range.
Features
●6 lines for EMI filtering and ESD protection:
– Exceeds IEC 61000-4-2, level 4 (ESD) immunity test
– ±20kV (contact discharge) and ±20kV (air discharge)
●Trench Vertical Structure [TVS]2 ™ based technology
used to achieve excellent ESD clamping and filter
performance over the full operating display range
●Filter performance: -20db attenuation from 1.0GHz to
3.0GHz
●Low operating voltage: 5.0V
●Capacitance stability over wide range of voltages and
temperatures
●DFN package 2.50mm x 1.20mm
●Pb-Free device
Applications
●EMI filtering and ESD protection for data lines
●LCD displays, camera interface, I/O interface
●Portable handheld devices, cell phones,
PDA phones
Electrical Schematic
Figure 1.
CH1
9pF 9pF
100Ω
9pF 9pF
100Ω
9pF 9pF
100Ω
D0
CH2
D1
CH6
D5
LCD/Camera
Module
AOZ8045
Rev. 1.2 July 2009 www.aosmd.com Page 2 of 7
Ordering Information
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
Pin Description
Part Number Ambient Temperature Range Package Environmental
AOZ8045DI -40°C to +85°C DFN-12 RoHS Compliant
Green Product
DFN-12
(Bottom View)
12
11
10
9
8
7
1
2
3
4
5
6
Exposed Pad (GND)
112
211
310
49
58
67
Top View
Pin Number Pin Name Pin Function
1,12 CH 1 Channel 1 Connections
2, 11 CH 2 Channel 2 Connections
3, 10 CH 3 Channel 3 Connections
4, 9 CH 4 Channel 4 Connections
5, 8 CH 5 Channel 5 Connections
6, 7 CH 6 Channel 6 Connections
Exposed Pad GND Common Ground Connection
AOZ8045
Rev. 1.2 July 2009 www.aosmd.com Page 3 of 7
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Notes:
1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω.
2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ.
Electrical Characteristics
TA = 25°C unless otherwise specified.
Notes:
3. The working peak reverse voltage, VRWM, should be equal to or greater than the DC or continuous peak operating voltage level.
4. VBR is measured at the pulse test current IT.
5. Measurements performed using a 100ns Transmission Line Pulse (TLP) system.
6. Total capacitance is equal to 2 x CCH.
7. Measured at 25°C, VR = 2.5V, f = 1.0MHz.
8. Guaranteed by design.
Parameter Rating
Storage Temperature (TS) -65°C to +150°C
ESD Rating per IEC61000-4-2, contact(1) ±20kV
ESD Rating per IEC61000-4-2, air(1) ±20kV
ESD Rating per Human Body Model(2) ±30kV
Symbol Parameter Conditions Min. Typ. Max. Units
VRWM Reverse Working Voltage (3) 5.0 V
VBR Reverse Breakdown Volt-
age
IT = 1mA(4) 678V
IRReverse Leakage Current VRWM = 3.3V 0.1 µA
VCL Signal Clamp Voltage ILOAD = 1A, positive clamp(5)(8)
ILOAD = 1A, negative clamp(5)(8)
7.0
-3.0
V
ILOAD = 5A, positive clamp(5)(8)
ILOAD = 5A, negative clamp(5)(8)
8.0
-8.0
ILOAD = 12A, positive clamp(5)(8)
ILOAD = 12A, negative clamp(5)(8)
10.0
-10.0
RCH Total Series Resistance IR = 20mA 90 100 110 Ω
CCH Channel Capacitance Input to Ground(6)(7)(8) 8910pF
fCCut-off Frequency Measured with 50Ω source and 50Ω load
termination
250 MHz
Attenuation from 1.0GHz
to 3.0GHz
VR = 0V Measured with 50Ω source and 50Ω
load termination
-20 dB
Rev. 1.2 July 2009 www.aosmd.com Page 4 of 7
AOZ8045
Typical Performance Characteristics
-45 -25 -5 5 25 45 65 85
Frequency (MHz)
Peak Pulse Current, Ipp (A)
Analog Crosstalk
0
-20
-40
-60
-80
-100
1 10 100 1000 10000
S21 (db)
Clamping Voltage vs. Peak Pulse Current
Clamping Voltage, Vcl (V)
Insertion Loss Characteristics
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
1 10 100 1000 10000
Frequency (MHz)
S21 (db)
6
7
8
9
10
11
024681012
Temparature (°C)
Typical Resistance vs. Temperature
Resistance (Ω)
110
105
100
95
90
Forward Current (A)
Forward Voltage vs. Forward Current
Forward Voltage (V)
2
4
6
8
10
12
02 46 81012
Rev. 1.2 July 2009 www.aosmd.com Page 5 of 7
AOZ8045
Package Dimensions, DFN 2.5 x 1.2, 12L EP1 S
E
D
12x
L
be
Pin 1 Marking
Pin 1 ID
(C0.2x45°)
UNIT: mm
Notes:
1. All dimensions are in millimeters. Converted inch dimensions are not necessarily exact.
Symbols
A
A1
b
A3
D
E
D1
D1
e
L
Dimensions in millimeters
RECOMMENDED LAND PATTERN
TOP VIEW
SIDE VIEW
BOTTOM VIEW
Min.
0.50
0.00
0.15
1.15
2.45
0.25
1.75
0.20
Nom.
0.55
—
0.20
0.152 REF
1.20
2.50
0.30
1.80
0.40 BSC
0.24
Max.
0.60
0.05
0.25
1.25
2.55
0.35
1.85
0.30
Symbols
A
A1
b
A3
D
E
D1
D1
e
L
Dimensions in inches
Min.
0.020
0.000
0.006
0.045
0.096
0.010
0.069
0.008
Nom.
0.022
—
0.008
0.006 REF
0.047
0.098
0.012
0.071
0.016 BSC
0.010
Max.
0.024
0.002
0.010
0.049
0.100
0.014
0.073
0.012
D1
A3
0.15
0.20
0.30
0.35
1.05
0.20
0.20
0.40
C0.15x45°
1.80
A1
A
E1
Rev. 1.2 July 2009 www.aosmd.com Page 6 of 7
AOZ8045
Tape and Dimensions, DFN 2.5 x 1.2
Carrier Tape
Reel
A–A
Leader / Trailer & Orientation
Tape Size
8mm
Reel Size
ø178
M
ø178.0
±1.0
Package
DFN 2.5x1.2
T
0.30
±0.05
B0
2.80
±0.05
A0
1.45
±0.05
K0
0.70
±0.05
D0
ø1.55
±0.05
D1
ø0.80
±0.05
E1
1.75
±0.1
E
8.00
±0.03
E2
3.50
±0.05
P0
4.00
±0.10
P1
4.0
±0.10
P2
2.0
±0.05
N
ø60.0
±0.5
Trailer Tape
300mm Min.
Components Tape
Orientation in Pocket
Leader Tape
500mm Min.
E1
E2 E
T
R
G
UNIT: mm
UNIT: mm
Feeding Direction
W
11.80
±0.5
H
ø13.0
+0.5 / –0.2
W1
9.0
±0.5
S
2.40
±0.1
K
10.25
±0.2
E
ø9.8
W1
M
W
N
H
SK
Ref 5°
B0
K0
P1
P2
D0 D1
P0 A0
Rev. 1.2 July 2009 www.aosmd.com Page 7 of 7
AOZ8045
Package Marking
32V
Assembly Location Code
Week & Year Code
Part Number Code
Underscore Denotes Green Product
AOZ8045DI
(DFN-12)
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
This data sheet contains preliminary data; supplementary data may be published at a later date.
Alpha & Omega Semiconductor reserves the right to make changes at any time without notice.
LIFE SUPPORT POLICY
ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
