1.27 mm pitch connector Cable-side IDC type male connector for mounting on a panel PCR-E( )PM( ) For panel IDC EMI-filtered Configuration of product Part No. PCR-E ( ) PM ( ) Series name No. of contacts: 20, 28, 36, 50, 68 or 96 Type of connector: Panel mount type, male Cable sizes for reference purposes (In case the cable sheath is made of PVC resin) PM : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.8-1 mm. For loose wire. PMA: AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of wire is 0.5-0.65 mm. For loose wire. PMB: AWG#30(7 / 0.1). Outside diameter of wire is 0.5-0.65 mm. For loose wire. (See Note #1) PMC: AWG#28(7 / 0.127) or AWG#30(1 / 0.254). IDC for fusible cable. (See Note #1) PMD: AWG#30(7 / 0.1). IDC for fusible cable. (See Note #2) A C TM B G 15 2-M2.5 2.8 D H B R1.4 7.5 MIN. 5.7 7.1 10.5 1.27 Recommended panel cut-out dimensions E 0.85 Cable housing for loose wires 16 1.3 5.4 3.9 0.85 Cable housing for flat cable 2 4.1 12.7 C F Note 1: PMB is not available for 28-contact connector. PMC is not available for 96-contact connector. Note 2: PMD is available only for 50 or 68-contact connectors. Panel mounting-hole dimensions for reference purposes Dimensions Components Contacts Insulator Shell Spacer Cable housings A Part No. PCR-E20PM( ) 33.40 PCR-E28PM( ) 38.48 B 27.40 C 11.43 D 13.20 E 21.60 F 21.65 G 23.80 H 16.45 32.48 16.51 18.28 26.68 26.70 28.90 21.53 PCR-E36PM( ) 43.56 PCR-E50PM( ) 52.45 37.56 21.59 23.36 31.76 31.80 34.00 26.61 46.45 30.48 32.25 40.65 40.70 42.90 35.50 PCR-E68PM( ) 63.88 PCR-E96PM( ) 81.66 57.88 41.91 43.68 52.08 52.10 54.60 46.93 75.66 59.69 61.46 69.86 69.90 72.10 64.71 Mating connectors: PCR series cable-side IDC type or soldering type female connector Accessories: Dust-proof cap, PCS-E( )C Tool: (Refer to page Tool-12) Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others