CX20548-11Z/APP - CONEXANT SYSTEMS

Chip Card & Security

Short Product Information

2011-11-24

SLE 66R01P

SLE 66R01PN

Intelligent 1216 bit EEPROM with

Contactless Interface compliant to

ISO/IEC 14443-3 Type A and support of

NFC Forum™ Type 2 Tag Operation

my-d™ move

my-d™ move NFC

Edition 2011-11-24

Published by

Infineon Technologies AG

81726 Munich, Germany

2011

Infineon Technologies AG

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or

characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any

information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties

and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights

of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest

Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in

question, please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written

approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure

of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support

devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain

and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may

be endangered.

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Short Product Information 3 / 14 2011-11-24

Trademarks of Infineon Technologies AG

BlueMoon™, COMNEON™, C166™, CROSSAVE™, CanPAK™, CIPOS™, CoolMOS™, CoolSET™,

CORECONTROL™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPACK™, EconoPIM™,

EiceDRIVER™, EUPEC™, FCOS™, HITFET™, HybridPACK™, ISOFACE™, I²RF™, IsoPACK™, MIPAQ™,

ModSTACK™, my-d™, NovalithIC™, OmniTune™, OptiMOS™, ORIGA™, PROFET™, PRO-SIL™,

PRIMARION™, PrimePACK™, RASIC™, ReverSave™, SatRIC™, SensoNor™, SIEGET™, SINDRION™,

SMARTi™, SmartLEWIS™, TEMPFET™, thinQ!™, TriCore™, TRENCHSTOP™, X-GOLD™, XMM™, X-PMU™,

XPOSYS™.

Other Trademarks

Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, PRIMECELL™,

REALVIEW™, THUMB™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership.

Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation

Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corporation.

FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of

Commission Electrotechnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of

Maxim Integrated Products, Inc. MICROTEC™, NFC Forum™ is trademark of Near Field Communication Forum,

NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS

Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of

Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems

Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Sattelite Radio Inc. SOLARIS™

of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited.

TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of

TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence

Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND

RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited.

my-d™ move / my-d™ move NFC - SLE 66R01P / SLE 66R01PN Short Product Information

The information in this document is subject to change without notice.

Revision History: Current Version 2011-11-24

Previous Release: Preliminary 2011-11-18

Page Subjects (major changes since last revision)

All Editorial changes; removed “Preliminary” status

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Short Product Information 4 / 14 2011-11-24

Features

Intelligent 1216 bit EEPROM with Contactless Interface compliant to

ISO/IEC 14443-3 Type A and support of NFC Forum™ Type 2 Tag Operation

Contactless Interface

• Physical Interface and Anticollision compliant to ISO/IEC 14443-3 Type A

– Operation frequency 13.56 MHz

– Data rate 106 kbit/s in both direction

– Contactless transmission of data and supply energy

– Anticollision logic: several cards may be operated in the field simultaneously

• Unique IDentification number (7-byte double-size UID) according to ISO/IEC 14443-3 Type A

• Read and Write Distance up to 10 cm and more (influenced by external circuitry i.e. reader and inlay design)

152 byte EEPROM

• Organized in 38 blocks of 4 bytes each

• 128 bytes freely programmable User Memory

• 24 bytes of Service Area reserved for UID, Configuration, LOCK Bytes, OTP Block and Manufacturer Data

• Read and Write of 128 bytes of User Memory in less than 100 ms

• Programming time per block < 4 ms

• Endurance minimum 10,000 erase/write cycles

• Data Retention minimum 5 years

Privacy Features

• 32 bit of One Time Programmable (OTP) memory area

• Locking mechanism for each block

• Block Lock mechanism

• Optional 32 bit Password for Read/Write or Write access

• Optional Password Retry Counter

• Optional 16 bit Value Counter

Data Protection

• Data Integrity supported by 16 bit CRC, parity bit, command length check

• Anti-tearing mechanism for OTP, Password Retry Counter and Value Counter

NFC Forum™ Operation

• Compliant to NFC Forum™ Type 2 Tag Operation

• Support of Static and Dynamic Memory Structure according to NFC Forum™ Type 2 Tag Operation

• SLE 66R01PN: pre-configured NFC memory with empty NDEF message (INITIALIZED state, non-reversible)

• SLE 66R01P: UNINITIALIZED state, may be configured to INITIALIZED state

Electrical Characteristics

• On-Chip capacitance 17 pF + 5%

• ESD protection minimum 2 kV

• Ambient Temperature -25°C … +70°C (for the chip)

1) Values are temperature dependent

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Ordering and packaging information

Short Product Information 5 / 14 2011-11-24

1 Ordering and packaging information

For more ordering information about the form of delivery please contact your local Infineon sales office.

1.1 Pin description

Figure 1 Pin configuration die

Table 1 Ordering information

Type Package Total Memory / User Memory

1) Total memory size includes the service area whereas user memory size is freely programmable for user data.

Ordering code

SLE 66R01P C wafer sawn / unsawn

152 / 128 bytes

on request

SLE 66R01P NB NiAu Bumped (sawn wafer) SP000911428

SLE 66R01PN C wafer sawn / unsawn on request

SLE 66R01PN NB NiAu Bumped (sawn wafer) SP000953914

Table 2 Pin description and function

Symbol Function

Antenna Connection

my-d™ move (NFC)

SLE 66R01P(N)

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

my-d™ Product Family

Short Product Information 6 / 14 2011-11-24

2 my-d™ Product Family

my-d™ products are available both in plain mode with open memory access and in secure mode with memory

access controlled by authentication procedures. The my-d™ product family provides users with different memory

sizes, features NFC Forum™ Type 2 Tag functionality and incorporates security features to enable considerable

flexibility in the application design.

Flexible controls within the my-d™ devices start with plain mode operation featuring individual page locking; for

more complex applications various settings in secure mode can be set for multi user / multi application

configurations.

In plain mode access to the memory is supported by both 4-byte block as well as 8-byte page structure.

In secure mode a cryptographic algorithm based on a 64-bit key is available. Mutual authentication, message

authentication codes (MAC) and customized access conditions protect the memory against unauthorized access.

The functional architecture, meaning the memory organization and authentication of my-d™ products is the same

for both my-d™ proximity (ISO/IEC 14443) and my-d™ vicinity (ISO/IEC 18000-3 mode 1 or ISO/IEC 15693). This

eases the system design and allows simple adaptation between applications.

Configurable Value Counters featuring anti-tearing functionality are suitable for value token applications, such as

limited use transportation tickets.

Architectural interoperability of my-d™ products enables an easy migration from simple to more demanding

applications.

The my-d™ move family is designed for cost optimized applications and its implemented command set eases the

usage in existing applications and infrastructures.

In addition, the my-d™ light (ISO/IEC 18000-3 mode 1 or ISO/IEC 15693) is part of the my-d™ family. Its optimized

command set and memory expands the range of applications to cost sensitive segments.

2.1 my-d™ move and my-d™ move NFC

The my-d™ move and my-d™ move NFC are part of Infineon’s my-d™ product family and are designed to meet

the requirements of the increasing NFC market demanding smart memories. They are compliant to

ISO/IEC 14443-3 Type A, to ISO/IEC 18092 and to NFC Forum™ Type 2 Tag Operation.

128 Bytes of memory can be arranged in static or dynamic memory structures for NFC applications.

my-d™ move and my-d™ move NFC products also feature configurable Value Counters which support anti-

tearing protection.

Privacy features like a password protection including password retry counter provide basic security to the

applications.

Based on SLE 66R01P the SLE 66R01PN already contains a pre-configuration of the NFC memory indicating the

INITIALIZED state according to the definition of the NFC Forum™ Type 2 Tag life cycle. Due to that the

my-d™ move NFC is ready to be used in NFC infrastructures.

my-d™ move and my-d™ move NFC products are suited for a broad range of applications like public transport,

event ticketing or smart posters.

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

my-d™ Product Family

Short Product Information 7 / 14 2011-11-24

2.2

Application Segments

my-d™ products are optimized for personal and object identification. Please find in the following table some

dedicated examples

Table 3 my-d™ family product overview

Product Application

my-d™ move - SLE 66R01P Public Transport, Smart Posters, NFC Device Pairing

my-d™ move NFC - SLE 66R01PN Public Transport, Smart Posters, NFC Device Pairing,

NFC INITIALIZED state

my-d™ move lean - SLE 66R01L Public Transport, Smart Posters, NFC Device Pairing

my-d™ NFC

SLE 66RxxP Smart Posters and Maps, NFC Device Pairing, Loyalty

Schemes, Consumer Good Information, Healthcare

Monitoring

my-d™ proximity 2

SLE 66RxxS Access Control, Entertainment, Public Transport,

Customer Loyalty Schemes, Micro Payment

my-d™ proximity enhanced

SLE 55RxxE Access Control, Gaming, Entertainment, Customer Loyalty

Schemes

my-d™ light

SRF 55V01P Libraries, Laundry, Factory Automation, Media

Management, Event Ticketing, Leisure Park Access

my-d™ vicinity plain

SRF 55VxxP Factory Automation, Healthcare, Ticketing, Access Control

my-d™ vicinity plain HC

SRF 55VxxP HC Ticketing, Brand Protection, Loyalty Schemes, Ski passes

my-d™ vicinity secure

SRF 55VxxS Ticketing, Brand protection, Loyalty Schemes, Access

Control

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Scope of my-d™ move / my-d™ move NFC

Short Product Information 8 / 14 2011-11-24

3 Scope of my-d™ move / my-d™ move NFC

The SLE 66R01P and SLE 66R01PN are part of the Infineon my-d™ product family and support Infineon’s

transport and ticketing strategy and are designed to meet the requirements of NFC applications.

They are compliant to ISO/IEC 14443-3 Type A, to ISO/IEC 18092 and to NFC Forum™ Type 2 Tag Operation.

3.1

Circuit Description

The SLE 66R01P and SLE 66R01PN are made up of an EEPROM memory unit, an analog interface for

contactless operation, a data transmission path and a control unit. The following diagram shows the main blocks

of the SLE 66R01P and SLE 66R01PN.

Figure 2 Block Diagram of the SLE 66R01P and SLE 66R01PN

The SLE 66R01P and SLE 66R01PN comprise the following three parts:

• Analog Contactless Interface

– The Analog Contactless Interface contains the voltage rectifier, voltage regulator and system clock to supply

the IC with appropriate power. Additionally the data stream is modulated and demodulated.

• Memory Unit

– The Memory Unit consists of 38 blocks of 4 bytes each.

• Control Unit

– The Control Unit decodes and executes all commands. Additionally the control unit is responsible for the

correct anticollision flow.

POWER

Control Unit

Memory

Access

IO Command

Analog

Contactless

Interface

Anticollision

DATA

Power Circuit

Rectifier

Clock Extractor

Voltage Regulator

Power on Reset

CLOCK

Parallel

Serial

Antenna

Memory Unit

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Scope of my-d™ move / my-d™ move NFC

Short Product Information 9 / 14 2011-11-24

3.2

Memory Principle

The total amount of addressable memory is 152 bytes organized in blocks of 4 bytes each.

The general structure comprises Service Areas as well as User Areas:

• 24 bytes of service and administration data (located in Service Area 1 and 2) reserved for

– 7-byte double-size UID

– configuration data

– LOCKx bytes

– OTP memory

– Manufacturing Data

• 128 bytes of User memory (located in User Area 1 and 2) reserved for

– User Data

– Value Counter

Additionally the Password and Password Retry Counter are available and accessible via dedicated commands.

Figure 3 SLE 66R01P and SLE 66R01PN memory principle

Password protectable

PASSWORD

PASSWORD RETRY COUNTER

Service Area 1

Service Area 2

User Area 2

User Area 1

Unique serial number (UID)

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Scope of my-d™ move / my-d™ move NFC

Short Product Information 10 / 14 2011-11-24

3.2.1 Service Area 1

Service Area 1 contains

• the 7-byte UID which is programmed at manufacturing of the chip and cannot be changed

• CONFIG byte to enable the Password (incl. the Password Retry counter) and the Value Counter functionality

• LOCK0, LOCK1 bytes to enable an irreversible write-protection for the blocks located in User Area 1

• 32 bits of the One-Time-Programmable (OTP) memory block can irreversibly be programmed from 0

to 1

3.2.2 User Area 1

48 bytes (12 blocks, 4 bytes each) of memory for user data.

3.2.3 User Area 2

User Area 2 contains

• 80 bytes (20 blocks, 4 bytes each) of user memory for user data. These memory blocks can be used to store

user data. This portion of the memory may be protected with a 32 bit password.

• a 16-bit Value Counter may be activated providing a mechanism to store some value (points, trips, ...) on the

my-d™ move and my-d™ move NFC chip.

3.2.4 Service Area 2

Service Area 2 contains

• lock bytes LOCK2 to LOCK5 to enable an irreversible write-protection for the blocks loacted in User Area 2

• Manufacturing Data (programmed during manufacturing of the chip) which cannot be changed

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Scope of my-d™ move / my-d™ move NFC

Short Product Information 11 / 14 2011-11-24

3.3

Memory Principle for

NFC Forum™ Type 2 Tag

The memory organization is configurable according to the NFC Forum™ Type 2 Tag Operation specification.

Static or dynamic memory structures are supported.

Figure 4 illustrates the principle of the SLE 66R01P and SLE 66R01PN as a NFC Forum™ Type 2 Tag

compatible chip. The memory can be accessed with NFC Forum™ Type 2 Tag commands.

Figure 4 SLE 66R01P and SLE 66R01PN NFC Forum™ Type 2 Tag memory structure

Based on SLE 66R01P the SLE 66R01PN already contains a pre-configuration of the NFC memory indicating the

INITIALIZED state according to the definition of the NFC Forum™ Type 2 Tag life cycle. With this pre-

configuration the my-d™ move NFC can be immediately used in NFC infrastructures.

For details regarding the NFC initialization of my-d™ move and my-d™ move NFC please refer the the Application

Note “How to operate my-d™ move and my-d™ move NFC devices in NFC Forum™ Type 2 Tag infrastructures”

and the Data Book available at Chip Card & Security security.chipcard.ics@infineon.com.

Attention: The pre-configuration of SLE 66R01PN is nonreversible and the my-d™ move NFC cannot be

overwritten and used as plain, standard my-d™ move anymore.

Password protectable

PASSWORD

PASSWORD RETRY COUNTER

Service Area 1

Service Area 2

User Area 2

User Area 1

Unique serial number (UID)

CAPABILITY CONTAINER

Data

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Scope of my-d™ move / my-d™ move NFC

Short Product Information 12 / 14 2011-11-24

3.4

System Overview

The system consists of a host system, one or more SLE 66R01P / SLE 66R01PN tags or other ISO/IEC 14443-

3 Type A compliant cards and an ISO/IEC 14443-3 Type A compatible contactless reader.

Alternatively, since the SLE 66R01P and SLE 66R01PN can be used in NFC Forum™ Type 2 Tag memory

structures, a NFC Forum™ device in card reader/writer mode can be used to operate the chip.

Figure 5 SLE 66R01P and SLE 66R01PN Contactless System Overview

Host System

Identification Terminal

ISO/IEC14443 Type A

NFC Forum™ Device

Micro

Controller Analog

Circuitry

Antenna

Data

Energy

Clock

SLE 66R01P(N)

my-dTM move (NFC)

PICC

PCD

my-d™ move / my-d™ move NFC

SLE 66R01P / SLE 66R01PN

Scope of my-d™ move / my-d™ move NFC

Short Product Information 13 / 14 2011-11-24

3.5

UID Coding

To identify a SLE 66R01P and SLE 66R01PN chip the manufacturer code and a chip family identifier are coded

into the UID as described in the Table 4. The chip family identifier can be used to determine the basic command

set for the chip.

Figure 6 SLE 66R01P and SLE 66R01PN double-size UID

3.6

Supported Standards

the SLE 66R01P and SLE 66R01PN support the following standards:

• ISO/IEC 14443 Type A (Parts 1, 2 and 3)

tested according to ISO/IEC 10373-6 (PICC Test & Validation)

• ISO/IEC 14443-3 Type A

• NFC Forum™ Type 2 Tag Operation

3.7

Command Set

The SLE 66R01P and SLE 66R01PN is compliant to the ISO/IEC 14443-3 Type A standard.

A set of standard ISO/IEC 14443-3 Type A commands is implemented to operate the chip.

Additionally NFC Forum™ Type 2 Tag commands and a my-d™ move and my-d™ move NFC specific command

set is implemented. This facilitates the access to the on-chip integrated memory and supports the execution of

password and counter functionality.

Table 4 UID Coding

UID Field Value Description

uid0 05

IC Manufacturer Code according to ISO/IEC 7816-6

uid1 3x

Chip Family Identifier

Higher Nibble: 0011

: my-d™ move and my-d™ move NFC

Lower Nibble: part of the UID number

Chip

Family ID

’05

’

’93'

uid0

PCD

PICC

UID

size

double

uid1 uid2 BCC uid3CT

’95'

uid4 uid6 BCCuid5

Published by Infineon Technologies AG

w w w . i n f i n e o n . c o m