Tinned Annealed Copper Wires Description: Insulated wires to defence standard 61 - 21 part 6 types 1, 2 and 3 also comply for corresponding standings and types, with the requirements of BS4808 classes 1, 2 and 3. Because the requirements set by the ministry of defence in defence standard 61 - 12 part 6 are more rigorous than the requirements in BS4808, the converse is not necessarily true The maximum recommended operating temperature for these wires is 85C. Defence standard current ratings quoted below will give a 15C temperature rise at an ambient temperature of 70C for single wires freely ventilated. Commercial ratings are suggested for use at 25C ambient Equipment wire with 10/0.1 mm conductors is a standing size not specifically listed in DEF.STAN.61 - 12 part 6. Because of its suitability for in conformance with specifications for similar size wires included in the specification Temperature rating 7/0.2 type 2 wire The temperature range of the above product is -15 to 85C, the upper temperature is the temperature at the conductor due to a combination of ambient and temperature rise due to current flow. The lower temperature is for the product in static mode Specification Table Area Conductor 7/0.2 Tinned (0.22 mm2) annealed copper wire type 2 Number and Size of Wire Maximum Working Voltage (KV r.m.s) 7 x 0.2 1 Nominal Nominal Ambient Resistance Insulation Current Insulation Overall Temperature at 20C Thickness /KM) ( Rating (A) Diameter (C) PVC 1.2 0.3 1.4 A at 70C 2 A at 25C 88 Dimensions : Millimetres Part Number Table Description 1.4 Part Number Wire, Black, 7/0.2 mm, 100 m MC6A-7/0.2T2-BK-100 Wire, Brown, 7/0.2 mm, 100 m MC6A-7/0.2T2-BN-100 Wire, Red, 7/0.2 mm, 100 m MC6A-7/0.2T2-RD-100 Wire, Orange, 7/0.2 mm, 100 m MC6A-7/0.2T2-OE-100 Wire, Yellow, 7/0.2 mm, 100 m MC6A-7/0.2T2-YW-100 Wire, Green, 7/0.2 mm, 100 m MC6A-7/0.2T2-GN-100 Wire, Blue, 7/0.2 mm, 100 m MC6A-7/0.2T2-BE-100 Wire, Violet, 7/0.2 mm, 100 m MC6A-7/0.2T2-VT-100 Wire, Grey, 7/0.2 mm, 100 m MC6A-7/0.2T2-GY-100 Wire, White, 7/0.2 mm, 100 m MC6A-7/0.2T2-WE-100 Wire, Pink, 7/0.2 mm, 100 m MC6A-7/0.2T2-PK-100M Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. (c) Premier Farnell plc 2011. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk 19/12/11 V1.1