Stock items are marked
by bold printed order numbers.
RAFIX 22 FS
Control components 2 - 163
2
RAFIX
22 FS
General data
RAFIX 22 FS control component range
• For a mounting hole diameter of 22.3 mm to IEC 60947
• Contact blocks with gold or silver contacts
• Depth behind panel only 9.2 mm
• Water-jet proof IP65
• 2 collar shapes
• The contact blocks can be combined with other components on the same PCB.
The specified data apply only if actuators/signal indicators are combined with contact blocks and lamp sockets within the
same product range.
Content
RAFIX 22 FS pushbutton 2 - 168
RAFIX 22 FS pushbutton, flush lens, round collar 2 - 169
RAFIX 22 FS pushbutton, protruding lens, round collar 2 - 170
RAFIX 22 FS pushbutton, protruding front ring, round collar 2 - 171
RAFIX 22 FS pushbutton, flush lens, square collar 2 - 172
RAFIX 22 FS pushbutton, protruding lens, square collar 2 - 173
RAFIX 22 FS pushbutton, protruding front ring 2 - 174
RAFIX 22 FS selector switch 2 - 176
RAFIX 22 FS selector switch, round collar 2 - 177
RAFIX 22 FS selector switch, square collar 2 - 178
RAFIX 22 FS keylock switch 2 - 180
RAFIX 22 FS keylock switch, round collar 2 - 181
RAFIX 22 FS keylock switch, square collar 2 - 182
RAFIX 22 FS emergency stop pushbutton 2 - 184
RAFIX 22 FS emergency stop pushbutton, non-illuminated, dupe-proof to EN 418, non-blocking 2 - 185
RAFIX 22 FS emergency stop pushbutton, illuminated, dupe-proof to EN 418, non-blocking 2 - 185
RAFIX 22 FS signal indicator 2 - 186
RAFIX 22 FS signal indicator, round collar 2 - 187
RAFIX 22 FS signal indicator, square collar 2 - 187
RAFIX 22 FS contact block with gold contacts 2 - 188
RAFIX 22 FS contact block with gold contacts 2 - 189
RAFIX 22 FS contact blocks with silver contacts 2 - 190
RAFIX 22 FS contact blocks with silver contacts 2 - 191
RAFIX 22 FS special accessories 2 - 192
Blanking cap 2 - 192
Ring nut 2 - 192
LED base for signal indicators 2 - 193
Plastic frontring with thermoflex protective cap 2 - 193
2 - 164 Control Components
2
RAFIX 22 FS
The new RAFIX 22 FS control
component range can be combined
on a common printed circuit board
together with short-travel keys and
other components thanks to its
extremely small mounting depth of
9.2 mm.
The actuators and signal indicators
are fastened to the front panel with a
threaded ring in a 22.3 mm panel cut-
out to IEC 60947. The cast-on collar
seal made of thermoflex and an
integrated special membrane
provide a water-jet proof degree of
protection IP 65 to DIN.
The contact blocks are soldered onto
the PCB. Illumination of the actuator
is provided by a 3 mm LED inserted
into the base of the contact block and
soldered to the PCB together with the
contact block.
The printed circuit board is fastened
to the front panel with bolts, with the
contact blocks sliding almost
completely into the actuators. In this
way an extremely low profile is
achieved. Additional advantages:
Individual
wiring is made unnecessary and
there is no more need for a cut-out
in the PCB in the control component
areas.
3 mm LED
Lens
transparent (illuminated) or opaque
Diffuser
(for transparent lenses only)
Actuator with
O-ring seal and
special membrane.
Housing with integrated
cast-on collar seal,
front panel
thickness 1 – 3 mm
Threaded ring
Contact block
(optionally with LED installed):
• 1NC, 1NO, 2NC, 1NC + 1 NO, 2 NO
(colour-coded plungers:
NC = red, NO = green)
• Gold contacts for 42 V max.
(grey housing)
or silver contacts for max. 250 V
(black housing)
• Locating pip for correct assembly
Printed circuit board
Screw-on front ring,
made of plastic or metallized
9,2 mm
RAFIX
22 FS
Control Components 2 - 165
RAFIX 22 FS
Cast-on
collar seal
Special sealing
Combined with short-travel keys
The actuators of the RAFIX 22FS system are suited for
integration into low-profile data entry systems. The small
mounting depth and the PCB solder terminals make it
possible to combine the contact blocks with Rafi
short-travel keys RACON 8 an 12, RF 15 and RF
19 as well as KN 19 on one and the same
printed circuit board.
Illumination
RAFIX 22 FS pushbuttons,
selector switches and emergency
stop buttons are also available
as illuminated versions. For illumi-
nation, we recommend to use the
superbright 3 mm LEDs in the colour
matching the lens. The LEDs are fitted
into the contact block and soldered
together with it. The signal indicators are
als illuminated with superbright LEDs
soldered directly onto the printed circuit board. In order
to ensure full illumination, the LED must be mounted on
a base. Bases are available as accessories.
Sealed against moisture and dirt
O-ring seal
The O-ring seals the space between the lens and the
actuator. The cast-on collar seal cannot be lost or
distorted during assembly. During assembly, the actuator
is held in the mounting hole by the cast-on seal and can
then be fixed by screwing from the rear.
The special membrane seal safely prevents moisture, oil
or dust from reaching the contact block.
In contrast with seals sliding up and down along the
shaft, the special membrane seal is arranged in a fixed
position on the housing. In this way, RAFIX 22 FS
guarentees switching raliability for the full service life
(degree of protection IP65 to DIN).
2
RAFIX
22 FS
2 - 166 Control Components
RAFIX 22 FS
Panel cut-out to IEC 60947
All actuators are provided with a locating pip.
With a grid spacing of 30 mm, the collars of the square
actuators are arranged next to each other without a space
in between. We recommend to use this grid spacing also
for the round collar shapes (IEC 60947).
Assembly indication
The mismatch of actuators and contact blocks must be
in a range of ø 0.2 mm.
Numerous design options for
individual panels
RAFIX 22 FS is available with many options.
Various lens and frontring combinations offer
nearly unlimited design options for your
panels. RAFIX 22 FS ist available both
with a round or a square collar.
The square version can be arranged
one collar to the next just as an
integral keypad.
Locating pip 1*
LED cathode
NO contacts
(on version with 2 NC’s, NC contacts)
Locating pip 2*
LED anode
NC contacts
(on version with 2 NO’s, NO contacts)
Hole patterns PCB,
view on component side
* For better distinction the locating pip 2 has
a bigger diameter than pip 1. In order to
ease the mounting, the positions are
additionally marked on the upper side of
the housing.
RAFIX
22 FS
2
min. 30.00
min. 30.00
Actuator position
RAFIX 22 FS
Control Components 2 - 167
2
RAFIX
22 FS
Installation drawing
PCB
top edge
Front panel
top edge
Front panel
Spacer
Printed circuit board
Captive nut
Stud
RAFIX 22 FS
emergency stop
RAFIX 22 FS
pushbutton
RF 19
short-travel key
Stock items are marked
by bold printed order numbers.
RAFIX 22 FS
2 - 168 Control components
2
RAFIX
22 FS
RAFIX 22 FS pushbuttons
panel cut-out acc. to IEC 60947-5-1silver/bluePict.: green/silver
Technical data
General information
Form of lens see order block
Colour of lens see order block
Colout of front ring see order block
Form of collar see order block
Dimensions
Length of collar see order block
Width of collar see order block
Overall height see order block
Mounting depth 9.2 mm
Mounting hole 22.3 mm
Key grid 30 x 30 mm
Diameter of collar see order block
Mechanical design
Mounting ring nut
Contact function see order block
Illuminability yes
Mechanical characteristics
Operating travel 4 mm
Robustness min. 100 N
Other specifications
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Operating life 1 million momentary/
0,5 million latching
Degree of protection
from front side IP65
Resistance to constant
environment IEC 60068-2-3 and 2-30
Resistance at variable
environment IEC 60068-2-14 and 2-33
Description Photo Order no. Page
Accessories RAFIX 22 FS pushbuttons
RAFIX 22 FS universal contact block, 1 NC + 1 NO,
gold contacts
1.20.126.003/0000 2 - 189
RAFIX 22 FS universal contact block, silver contacts, 1 NO 1.20.126.202/0000 2 - 191
Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25
For additional accessories, refer to the chapter „Special accessories“.
RAFIX 22 FS
Stock items are marked
by bold printed order numbers.
Control components 2 - 169
2
RAFIX
22 FS
RAFIX 22 FS pushbutton, flush lens, round collar
Pict.: green/silver grey panel cut-out acc. to IEC 60947-5-1
Colour of lensIlluminability Order no. momentary
Plastic front ring Metallized front ring
Order no. latching
Plastic front ring Metallized front ring
yes transparent white 1.30.250.001/10xx 1.30.250.021/1000 1.30.250.011/10xx 1.30.250.031/1000
yes transparent red 1.30.250.001/13xx 1.30.250.021/1300 1.30.250.011/13xx 1.30.250.031/1300
yes transparent yellow 1.30.250.001/14xx 1.30.250.021/1400 1.30.250.011/14xx 1.30.250.031/1400
yes transparent green 1.30.250.001/15xx 1.30.250.021/1500 1.30.250.011/15xx 1.30.250.031/1500
yes transparent blue 1.30.250.001/16xx 1.30.250.021/1600 1.30.250.011/16xx 1.30.250.031/1600
no opaque black 1.30.250.101/01xx 1.30.250.121/0100 1.30.250.111/01xx 1.30.250.131/0100
no opaque white 1.30.250.101/02xx 1.30.250.121/0200 1.30.250.111/02xx 1.30.250.131/0200
no opaque red 1.30.250.101/03xx 1.30.250.121/0300 1.30.250.111/03xx 1.30.250.131/0300
no opaque yellow 1.30.250.101/04xx 1.30.250.121/0400 1.30.250.111/04xx 1.30.250.131/0400
no opaque green 1.30.250.101/05xx 1.30.250.121/0500 1.30.250.111/05xx 1.30.250.131/0500
no opaque blue 1.30.250.101/06xx 1.30.250.121/0600 1.30.250.111/06xx 1.30.250.131/0600
no opaque slate-grey 1.30.250.101/07xx 1.30.250.121/0700 1.30.250.111/07xx 1.30.250.131/0700
Technical data see page 2 - 168
Accessories:
Legend insert without legend: 5.70.800.000/2000
Plastic frontring slate grey with protection cap: 5.05.004.986/0700
Plastic frontring silver grey with protection cap: 5.05.004.986/0800
Plastic frontring black with protection cap: 5.05.004.986/0100
Plastic frontring red with protection cap: 5.05.004.986/0300
Plastic frontring yellow with protection cap: 5.05.004.986/0400
Plastic frontring green with protection cap: 5.05.004.986/0500
Plastic frontring blue with protection cap: 5.05.004.986/0600
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Order numbers 1.30.250.001/—08 and 1.30.250.011/—08 (with silver grey plastic front ring) are stock items.
Stock items are marked
by bold printed order numbers.
RAFIX 22 FS
2 - 170 Control components
2
RAFIX
22 FS
RAFIX 22 FS pushbutton, protruding lens, round collar
Pict.: black/metallized panel cut-out acc. to IEC 60947-5-1
Colour of lensIlluminability Order no. momentary
Plastic front ring Metallized front ring
Order no. latching
Plastic front ring Metallized front ring
yes transparent white 1.30.250.201/10xx 1.30.250.221/1000 1.30.250.211/10xx 1.30.250.231/1000
yes transparent red 1.30.250.201/13xx 1.30.250.221/1300 1.30.250.211/13xx 1.30.250.231/1300
yes transparent yellow 1.30.250.201/14xx 1.30.250.221/1400 1.30.250.211/14xx 1.30.250.231/1400
yes transparent green 1.30.250.201/15xx 1.30.250.221/1500 1.30.250.211/15xx 1.30.250.231/1500
yes transparent blue 1.30.250.201/16xx 1.30.250.221/1600 1.30.250.211/16xx 1.30.250.231/1600
no opaque black 1.30.250.301/01xx 1.30.250.321/0100 1.30.250.311/01xx 1.30.250.331/0100
no opaque white 1.30.250.301/02xx 1.30.250.321/0200 1.30.250.311/02xx 1.30.250.331/0200
no opaque red 1.30.250.301/03xx 1.30.250.321/0300 1.30.250.311/03xx 1.30.250.331/0300
no opaque yellow 1.30.250.301/04xx 1.30.250.321/0400 1.30.250.311/04xx 1.30.250.331/0400
no opaque green 1.30.250.301/05xx 1.30.250.321/0500 1.30.250.311/05xx 1.30.250.331/0500
no opaque blue 1.30.250.301/06xx 1.30.250.321/0600 1.30.250.311/06xx 1.30.250.331/0600
no opaque slate-grey 1.30.250.301/07xx 1.30.250.321/0700 1.30.250.311/07xx 1.30.250.331/0700
Technical data see page 2 - 168
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Order numbers 1.30.250.201/—08 and 1.30.250.211/—08 (with silver grey plastic front ring) are stock items.
Accessories:
Legend insert without legend: 5.70.802.000/2000
RAFIX 22 FS
Stock items are marked
by bold printed order numbers.
Control components 2 - 171
2
RAFIX
22 FS
RAFIX 22 FS pushbutton, protruding front ring, round collar
Pict.: white/slate grey panel cut-out acc. to IEC 60947-5-1
Colour of lensIlluminability Order no. momentary
Plastic front ring Metallized front ring
Order no. latching
Plastic front ring Metallized front ring
yes transparent white 1.30.250.401/10xx 1.30.250.421/1000
yes transparent red 1.30.250.401/13xx 1.30.250.421/1300
yes transparent yellow 1.30.250.401/14xx 1.30.250.421/1400
yes transparent green 1.30.250.401/15xx 1.30.250.421/1500
yes transparent blue 1.30.250.401/16xx 1.30.250.421/1600
no opaque black 1.30.250.501/01xx 1.30.250.521/0100
no opaque white 1.30.250.501/02xx 1.30.250.521/0200
no opaque red 1.30.250.501/03xx 1.30.250.521/0300
no opaque yellow 1.30.250.501/04xx 1.30.250.521/0400
no opaque green 1.30.250.501/05xx 1.30.250.521/0500
no opaque blue 1.30.250.501/06xx 1.30.250.521/0600
no opaque slate-grey 1.30.250.501/07xx 1.30.250.521/0700
Technical data see page 2 - 168
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Accessories:
Legend insert without legend: 5.70.800.000/2000
Stock items are marked
by bold printed order numbers.
RAFIX 22 FS
2 - 172 Control components
2
RAFIX
22 FS
RAFIX 22 FS pushbutton, flush lens, square collar
Pict.: blue/silver grey panel cut-out acc. to IEC 60947-5-1
Colour of lensIlluminability Order no. momentary
Plastic front ring Metallized front ring
Order no. latching
Plastic front ring Metallized front ring
yes transparent white 1.30.250.051/10xx 1.30.250.071/1000 1.30.250.061/10xx 1.30.250.081/1000
yes transparent red 1.30.250.051/13xx 1.30.250.071/1300 1.30.250.061/13xx 1.30.250.081/1300
yes transparent yellow 1.30.250.051/14xx 1.30.250.071/1400 1.30.250.061/14xx 1.30.250.081/1400
yes transparent green 1.30.250.051/15xx 1.30.250.071/1500 1.30.250.061/15xx 1.30.250.081/1500
yes transparent blue 1.30.250.051/16xx 1.30.250.071/1600 1.30.250.061/16xx 1.30.250.081/1600
no opaque black 1.30.250.151/01xx 1.30.250.171/0100 1.30.250.161/01xx 1.30.250.181/0100
no opaque white 1.30.250.151/02xx 1.30.250.171/0200 1.30.250.161/02xx 1.30.250.181/0200
no opaque red 1.30.250.151/03xx 1.30.250.171/0300 1.30.250.161/03xx 1.30.250.181/0300
no opaque yellow 1.30.250.151/04xx 1.30.250.171/0400 1.30.250.161/04xx 1.30.250.181/0400
no opaque green 1.30.250.151/05xx 1.30.250.171/0500 1.30.250.161/05xx 1.30.250.181/0500
no opaque blue 1.30.250.151/06xx 1.30.250.171/0600 1.30.250.161/06xx 1.30.250.181/0600
no opaque slate-grey 1.30.250.151/07xx 1.30.250.171/0700 1.30.250.161/07xx 1.30.250.181/0700
Technical data see page 2 - 168
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Order numbers 1.30.250.051/—08 and 1.30.250.061/—08 (with silver grey plastic front ring) are stock items.
Accessories:
Legend insert without legend: 5.70.800.000/2000
Plastic frontring black with protection cap: 5.05.004.986/0100
Plastic frontring red with protection cap: 5.05.004.986/0300
Plastic frontring yellow with protection cap: 5.05.004.986/0400
Plastic frontring green with protection cap: 5.05.004.986/0500
Plastic frontring blue with protection cap: 5.05.004.986/0600
Plastic frontring slate grey with protection cap: 5.05.004.986/0700
Plastic frontring silver grey with protection cap: 5.05.004.986/0800
RAFIX 22 FS
Stock items are marked
by bold printed order numbers.
Control components 2 - 173
2
RAFIX
22 FS
RAFIX 22 FS pushbutton, protruding lens, square collar
Pict.: white/blue panel cut-out acc. to IEC 60947-5-1
Colour of lensIlluminability Order no. momentary
Plastic front ring Metallized front ring
Order no. latching
Plastic front ring Metallized front ring
yes transparent white 1.30.250.251/10xx 1.30.250.271/1000 1.30.250.261/10xx 1.30.250.281/1000
yes transparent red 1.30.250.251/13xx 1.30.250.271/1300 1.30.250.261/13xx 1.30.250.281/1300
yes transparent yellow 1.30.250.251/14xx 1.30.250.271/1400 1.30.250.261/14xx 1.30.250.281/1400
yes transparent green 1.30.250.251/15xx 1.30.250.271/1500 1.30.250.261/15xx 1.30.250.281/1500
yes transparent blue 1.30.250.251/16xx 1.30.250.271/1600 1.30.250.261/16xx 1.30.250.281/1600
no opaque black 1.30.250.351/01xx 1.30.250.371/0100 1.30.250.361/01xx 1.30.250.381/0100
no opaque white 1.30.250.351/02xx 1.30.250.371/0200 1.30.250.361/02xx 1.30.250.381/0200
no opaque red 1.30.250.351/03xx 1.30.250.371/0300 1.30.250.361/03xx 1.30.250.381/0300
no opaque yellow 1.30.250.351/04xx 1.30.250.371/0400 1.30.250.361/04xx 1.30.250.381/0400
no opaque green 1.30.250.351/05xx 1.30.250.371/0500 1.30.250.361/05xx 1.30.250.381/0500
no opaque blue 1.30.250.351/06xx 1.30.250.371/0600 1.30.250.361/06xx 1.30.250.381/0600
no opaque slate-grey 1.30.250.351/07xx 1.30.250.371/0700 1.30.250.361/07xx 1.30.250.381/0700
Technical data see page 2 - 168
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Order numbers 1.30.250.251/—08 and 1.30.250.261/—08 (with silver grey plastic front ring) are stock items.
Accessories:
Legend insert without legend: 5.70.802.000/2000
Stock items are marked
by bold printed order numbers.
RAFIX 22 FS
2 - 174 Control components
2
RAFIX
22 FS
RAFIX 22 FS pushbutton, protruding front ring
Pict.: green/metallized panel cut-out acc. to IEC 60947-5-1
Colour of lensIlluminability Order no. momentary
Plastic front ring Metallized front ring
Order no. latching
Plastic front ring Metallized front ring
yes transparent white 1.30.250.451/10xx 1.30.250.471/1000
yes transparent red 1.30.250.451/13xx 1.30.250.471/1300
yes transparent yellow 1.30.250.451/14xx 1.30.250.471/1400
yes transparent green 1.30.250.451/15xx 1.30.250.471/1500
yes transparent blue 1.30.250.451/16xx 1.30.250.471/1600
no opaque black 1.30.250.551/01xx 1.30.250.571/0100
no opaque white 1.30.250.551/02xx 1.30.250.571/0200
no opaque red 1.30.250.551/03xx 1.30.250.571/0300
no opaque yellow 1.30.250.551/04xx 1.30.250.571/0400
no opaque green 1.30.250.551/05xx 1.30.250.571/0500
no opaque blue 1.30.250.551/06xx 1.30.250.571/0600
no opaque slate-grey 1.30.250.551/07xx 1.30.250.571/0700
Technical data see page 2 - 168
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Accessories:
Legend insert without legend: 5.70.800.000/2000
Stock items are marked
by bold printed order numbers.
2 - 176 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS selector switches
Einbauöffung nach IEC 60947-5-1non-illuminatedPict.: Front ring, silver grey, illuminated
General data
The illuminated selector switches are provided with translucent handle markings. These are opaque on the non-
illuminated versions.
Technical data
General information
Form of lens handle
Colour of lens translucent/opaque white
Colout of front ring see order block
Form of collar see order block
Dimensions
Length of collar see order block
Width of collar see order block
Overall height 22.24 mm
Mounting depth 9.2 mm
Mounting hole 22.3 mm
Key grid 30 x 30 mm
Diameter of collar see order block
Mechanical design
Mounting ring nut
Contact function see order block
Illuminability yes
Rotating angle see order block
Mechanical characteristics
Torque max. 1.5 Nm
Other specifications
Operating life 0.5 million momentary /
0.5 million latching
Degree of protection
from front side IP65
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment IEC 600 68-2-3 and 2-30
Resistance at variable
environment IEC 600 68-2-14 and 2-33
Description Photo Order no. Page
Accessories RAFIX 22 FS selector switches
RAFIX 22 FS universal contact block, 1 NO 1.20.126.002/0000 2 - 189
RAFIX 22 FS universal contact block, silver contacts, 1 NC 1.20.126.201/0000 2 - 191
For additional accessories, refer to the chapter „Special accessories“.
Stock items are marked
by bold printed order numbers.
Control components 2 - 177
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS selector switch, round collar
Pict.: Front ring, silver grey, illuminated Einbauöffung nach IEC 60947-5-1
Illuminability Drehwinkel Order no.
Plastic front ring Metal front ring
Contact function Rotating angle
yes latching 2 x 60°1Ö + 1S 1.30.252.301/22xx 1.30.252.302/2200
yes latching 2 x 90°1Ö + 1S 1.30.252.126/22xx 1.30.252.127/2200
no momentary 1 x 40°1Ö + 1S 1.30.252.501/02xx 1.30.252.502/0200
no momentary 2 x 40°1Ö + 1S 1.30.252.526/02xx 1.30.252.527/0200
no latching 1 x 90°and
momentary 1 x 40°
1 x 90°and 1 x 40°1Ö + 1S
2
0
1.30.252.926/02xx 1.30.252.927/0200
no latching 1 x 90°, form L 1Ö + 1S 1.30.252.601/02xx 1.30.252.602/0200
no latching 1 x 90°, form V 1Ö + 1S 1.30.252.701/02xx 1.30.252.702/0200
no latching 2 x 60°1Ö + 1S 1.30.252.801/02xx 1.30.252.802/0200
no latching 2 x 90°1Ö + 1S 1.30.252.626/02xx 1.30.252.627/0200
yes momentary 1 x 40°1Ö + 1S 1.30.252.001/22xx 1.30.252.002/2200
yes momentary 2 x 40°1Ö + 1S 1.30.252.026/22xx 1.30.252.027/2200
yes latching 1 x 90°and
momentary 1 x 40°
1 x 90°and 1 x 40°1Ö + 1S
2
0
1.30.252.426/22xx 1.30.252.427/2200
yes latching 1 x 90°, form L 1Ö + 1S 1.30.252.101/22xx 1.30.252.102/2200
yes latching 1 x 90°, form V 1Ö + 1S 1.30.252.201/22xx 1.30.252.202/2200
Technical data see page 2 - 176
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Other handle marking colours available on request.
The following selector switches with silver grey plastic front ring are stock items:
Illuminated: 1.30.242.001/2208, 1.30.242.026/2208, 1.30.242.101/2208, 1.30.242.201/2208, 1.30.242.301/2208
Non-illuminated: 1.30.242.501/0208, 1.30.242.526/0208, 1.30.242.601/0208, 1.30.242.701/0208, 1.30.242.801/0208
Stock items are marked
by bold printed order numbers.
2 - 178 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS selector switch, square collar
Pict.: Front ring, metallized, illuminated Einbauöffung nach IEC 60947-5-1
Illuminability Drehwinkel Order no.
Plastic front ring Metal front ring
Contact function Rotating angle
yes momentary 1 x 40°1Ö + 1S 1.30.252.051/22xx 1.30.252.052/2200
yes momentary 2 x 40°1Ö + 1S 1.30.252.076/22xx 1.30.252.077/2200
yes latching 1 x 90°and
momentary 1 x 40°
1 x 90°and 1 x 40°1Ö + 1S
2
0
1.30.252.476/22xx 1.30.252.477/2200
yes latching 1 x 90°, form L 1Ö + 1S 1.30.252.151/22xx 1.30.252.152/2200
yes latching 1 x 90°, form V 1Ö + 1S 1.30.252.251/22xx 1.30.252.252/2200
yes latching 2 x 60°1Ö + 1S 1.30.252.351/22xx 1.30.252.352/2200
yes latching 2 x 90°1Ö + 1S 1.30.252.176/22xx 1.30.252.177/2200
no momentary 1 x 40°1Ö + 1S 1.30.252.551/02xx 1.30.252.552/0200
no momentary 2 x 40°1Ö + 1S 1.30.252.576/02xx 1.30.252.577/0200
no latching 1 x 90°and
momentary 1 x 40°
1 x 90°and 1 x 40°1Ö + 1S
2
0
1.30.252.976/02xx 1.30.252.977/0200
no latching 1 x 90°, form L 1Ö + 1S 1.30.252.651/02xx 1.30.252.652/0200
no latching 1 x 90°, form V 1Ö + 1S 1.30.252.751/02xx 1.30.252.752/0200
no latching 2 x 60°1Ö + 1S 1.30.252.851/02xx 1.30.252.852/0200
no latching 2 x 90°1Ö + 1S 1.30.252.676/02xx 1.30.252.677/0200
Technical data see page 2 - 176
xx = Front ring colour: black = 01, red = 03, yellow = 04, green = 05, blue = 06, slate grey = 07, silver grey = 08
Other handle marking colours available on request.
The following selector switches with silver grey plastic front ring are stock items:
Illuminated: 1.30.252.051/2205, 1.30.252.076/2208, 1.30.252.151/2208, 1.30.252.251/2208, 1.30.252.351/2208
Non-illuminated: 1.30.252.551/0208, 1.30.252.576/0208, 1.30.252.651/0208, 1.30.252.751/0208, 1.30.252.851/0208
Stock items are marked
by bold printed order numbers.
2 - 180 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS keylock switch
Einbauöffung nach IEC 60947-5-1redPict.: blue
Technical data
General information
Colout of front ring see order block
Form of collar see order block
Dimensions
Length of collar see order block
Width of collar see order block
Overall height 44.1 mm
Mounting depth 9.2 mm
Mounting hole 22.3 mm
Key grid 30 x 30 mm
Diameter of collar see order block
Mechanical design
Mounting ring nut
Contact function see order block
Lock Micromec
Wafers 5
Illuminability no
Lock type 001
Number of locking
positions 500
Main key no
Symmetric key no
Rotating angle see order block
Key removal position see order block
Mechanical characteristics
Torque max. 1.3 Nm
Other specifications
Operating life 0.3 Mio. tastend/
50000 rastend
Degree of protection
from front side IP65
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment IEC 600 68-2-3 and 2-30
Resistance at variable
environment IEC 600 68-2-14 and 2-33
ESD-strength lock /
contact 15 kV
ESD-strength key/ front
panel 15 kV
Description Photo Order no. Page
Accessories RAFIX 22 FS keylock switch
RAFIX 22 FS universal contact block, 1 NC 1.20.126.001/0000 2 - 189
RAFIX 22 FS universal contact block, silver contacts,
1 NC, 1 NO
1.20.126.203/0000 2 - 191
Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25
For additional accessories, refer to the chapter „Special accessories“.
Stock items are marked
by bold printed order numbers.
Control components 2 - 181
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS keylock switch, round collar
Pict.: blue Einbauöffung nach IEC 60947-5-1
Contact function Drehwinkel Order no.
Plastic front ring Metal front ring
Rotating angle Key removal position
momentary 2 x 40°0 1Ö + 1S 1.30.255.101/xxxx 1.30.255.102/0000
momentary 1 x 40°0 1Ö + 1S 1.30.255.001/xxxx 1.30.255.002/0000
latching 1 x 90°and
momentary 1 x 40°
1 x 90°and
1 x 40°
0 1Ö + 1S
2
0
1.30.255.501/xxxx 1.30.255.502/0000
latching 1 x 90°and
momentary 1 x 40°
1 x 90°and
1 x 40°
0+2 1Ö + 1S
2
0
1.30.255.521/xxxx 1.30.255.522/0000
latching 1 x 90°and
momentary 1 x 40°
1 x 90°and
1 x 40°
2 1Ö + 1S
2
0
1.30.255.511/xxxx 1.30.255.512/0000
latching 2 x 90°0 1Ö + 1S 1.30.255.401/xxxx 1.30.255.402/0000
latching 2 x 90°0+1 1Ö + 1S 1.30.255.411/xxxx 1.30.255.412/0000
latching 2 x 90°0+1+2 1Ö + 1S 1.30.255.431/xxxx 1.30.255.432/0000
latching 2 x 90°0+2 1Ö + 1S 1.30.255.421/xxxx 1.30.255.422/0000
latching 1 x 90°, form V 0 1Ö + 1S 1.30.255.301/xxxx 1.30.255.302/0000
latching 1 x 90°, form V 0+1 1Ö + 1S 1.30.255.321/xxxx 1.30.255.322/0000
latching 1 x 90°, form V 1 1Ö + 1S 1.30.255.311/xxxx 1.30.255.312/0000
latching 1 x 90°, form L 0 1Ö + 1S 1.30.255.201/xxxx 1.30.255.202/0000
latching 1 x 90°, form L 0+1 1Ö + 1S 1.30.255.221/xxxx 1.30.255.222/0000
latching 1 x 90°, form L 1 1Ö + 1S 1.30.255.211/xxxx 1.30.255.212/0000
Technical data see page 2 - 180
xxxx = Front ring colour: black = 0100, red = 0300, yellow = 0400, green = 0500, blue = 0600, slate grey = 0700, silver grey = 0800
Other lock variants available on request.
Included: 2 keys.
The following keylock switches with silver grey plastic front ring are stock items: 1.30.255.001/0800, 1.30.255.201/0800,
1.30.255.221/0800, 1.30.255.301/0800, 1.30.255.321/0800, 1.30.255.431/0800
Stock items are marked
by bold printed order numbers.
2 - 182 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS keylock switch, square collar
Pict.: red Einbauöffung nach IEC 60947-5-1
Contact function Drehwinkel Order no.
Plastic front ring Metal front ring
Rotating angle Key removal position
momentary 2 x 40°0 1Ö + 1S 1.30.255.151/xxxx 1.30.255.152/0000
momentary 1 x 40°0 1Ö + 1S 1.30.255.051/xxxx 1.30.255.052/0000
latching 1 x 90°and
momentary 1 x 40°
1 x 90°and
1 x 40°
0 1Ö + 1S
2
0
1.30.255.551/xxxx 1.30.255.552/0000
latching 1 x 90°and
momentary 1 x 40°
1 x 90°and
1 x 40°
0+2 1Ö + 1S
2
0
1.30.255.571/xxxx 1.30.255.572/0000
latching 1 x 90°and
momentary 1 x 40°
1 x 90°and
1 x 40°
2 1Ö + 1S
2
0
1.30.255.561/xxxx 1.30.255.562/0000
latching 2 x 90°0 1Ö + 1S 1.30.255.451/xxxx 1.30.255.452/0000
latching 2 x 90°0+1 1Ö + 1S 1.30.255.461/xxxx 1.30.255.462/0000
latching 2 x 90°0+1+2 1Ö + 1S 1.30.255.481/xxxx 1.30.255.482/0000
latching 2 x 90°0+2 1Ö + 1S 1.30.255.471/xxxx 1.30.255.472/0000
latching 1 x 90°, form V 0 1Ö + 1S 1.30.255.351/xxxx 1.30.255.352/0000
latching 1 x 90°, form V 0+1 1Ö + 1S 1.30.255.371/xxxx 1.30.255.372/0000
latching 1 x 90°, form V 1 1Ö + 1S 1.30.255.361/xxxx 1.30.255.362/0000
latching 1 x 90°, form L 0 1Ö + 1S 1.30.255.251/xxxx 1.30.255.252/0000
latching 1 x 90°, form L 0+1 1Ö + 1S 1.30.255.271/xxxx 1.30.255.272/0000
latching 1 x 90°, form L 1 1Ö + 1S 1.30.255.261/xxxx 1.30.255.262/0000
Technical data see page 2 - 180
xxxx = Front ring colour: black = 0100, red = 0300, yellow = 0400, green = 0500, blue = 0600, slate grey = 0700, silver grey = 0800
Other lock variants available on request.
Included: 2 keys.
The following keylock switches with silver grey plastic front ring are stock items: 1.30.255.051/0800, 1.30.255.251/0800,
1.30.255.271/0800, 1.30.255.351/0800, 1.30.255.371/0800, 1.30.255.481/0800
Stock items are marked
by bold printed order numbers.
2 - 184 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS emergency stop pushbutton
panel cut-out acc. to IEC 60947-5-1Pict.: red
General data
The emergency stop pushbuttons comply with IEC 60 204, IEC 60 073, IEC 60 947 and VDE 0113 Part 1. They are designed
dupe-proof according to EN 418 with a positive mechanical movement sequence. A certain operating force must be
exerted at the action point in order to prevent inadvertent operation. The pushbutton latches when pressed and is reset
by turning it in a clockwise direction.
The special shape of the actuator prevents the emergency stop pushbutton from being blocked. This means that the
emergency stop process - once initiated - cannot be impeded by any jamming objects.
Only use contact block 1.20.126.4xx.
Technical data
General information
Form of lens conical mushroom form
Colour of lens red
Form of collar round
Dimensions
Mushroom Diameter 30 mm
Overall height 33.2 mm
Mounting depth 9.2 mm
Mounting hole 22.3 mm
Key grid 30 x 30 mm
Diameter of collar 29.8 mm
Mechanical design
Mounting ring nut
Contact function latching
Illuminability see order block
Mechanical characteristics
Robustness min. 100 N
Other specifications
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Approvals acc. to IEC 60947-5-x, 60204, 60073,
601058
Approvals, other UL 508, CSA, cURuS
(UL + CSA)
Robustness acc. IEC 600 68-2-3 and
2-30
Operating life 50000
Degree of protection
from front side IP65
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment IEC 600 68-2-3 and 2-30
Resistance at variable
environment IEC 600 68-2-14 and 2-33
Description Photo Order no. Page
Accessories RAFIX 22 FS emergency stop pushbutton
RAFIX 22 FS emergency stop contact block, 1 NC,
gold contacts
1.20.126.401/0000 2 - 189
RAFIX 22 FS emergency stop contact block, 2 NC,
gold contacts
1.20.126.404/0000 2 - 189
Stock items are marked
by bold printed order numbers.
Control components 2 - 185
2
RAFIX
22 FS
RAFIX 22 FS
Description Photo Order no. Page
Accessories RAFIX 22 FS emergency stop pushbutton
RAFIX 22 FS emergency stop contact block, silver
contacts, 1 NC
1.20.126.601/0000 2 - 191
Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25
Emergency stop label, yellow, round 60 mm,
PVC adhesive, without legend
5.76.204.100/0400 2 - 161
Emergency stop label, yellow, round 60 mm,
PVC adhesive, with legend "NOT-AUS"
5.76.204.101/0400 2 - 161
Emergency stop label, yellow, round 60 mm,
PVC adhesive, with legend "ARRET D'URGENCE"
5.76.204.102/0400 2 - 161
Emergency stop label, yellow, round 60 mm,
PVC adhesive, with legend "EMERGENCY-STOP"
5.76.204.103/0400 2 - 161
Emergency stop label, yellow 36 x 64 mm, PVC adhesive,
without legend
5.76.205.011/0400 2 - 161
RAFIX 22 FS emergency stop pushbutton, non-illuminated, dupe-proof to EN 418,
non-blocking
Pict.: red panel cut-out acc. to IEC 60947-5-1
Illuminability Approvals acc. to IEC Order no. complete
no 60947-5-x, 60204, 60073, 601058 1.30.253.501/0300
Technical data see page 2 - 184
RAFIX 22 FS emergency stop pushbutton, illuminated, dupe-proof to EN 418,
non-blocking
Pict.: red panel cut-out acc. to IEC 60947-5-1
Illuminability Approvals acc. to IEC Order no. complete
yes 60947-5-x, 60204, 60073, 601058 1.30.253.001/0300
Technical data see page 2 - 184
Stock items are marked
by bold printed order numbers.
2 - 186 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS signal indicator
panel cut-out acc. to IEC 60947-5-1Pict.: yellow
Technical data
General information
Form of lens flat lens
Colour of lens see order block
Form of collar see order block
Dimensions
Length of collar see order block
Width of collar see order block
Overall height 9.7 mm
Mounting depth 9.2 mm
Mounting hole 22.3 mm
Key grid 30 x 30 mm
Diameter of collar see order block
Mechanical design
Mounting ring nut
Illuminability yes
Mechanical characteristics
Robustness min. 100 N
Other specifications
Degree of protection
from front side IP65
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Resistance to constant
environment IEC 600 68-2-3 and 2-30
Resistance at variable
environment IEC 600 68-2-14 and 2-33
Description Photo Order no. Page
Accessories RAFIX 22 FS signal indicator
3 mm LED superbright red 1.90.690.269/0000 5 - 21
Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25
LED base for signal indicators 5.30.109.020/0756 2 - 193
Legend insert blank 5.70.806.000/2000
Stock items are marked
by bold printed order numbers.
Control components 2 - 187
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS signal indicator, round collar
Pict.: yellow panel cut-out acc. to IEC 60947-5-1
Form of collar Colour of lens Order no. complete
round transparent colourless 1.74.506.001/1000
round transparent red 1.74.506.001/1300
round transparent yellow 1.74.506.001/1400
round transparent green 1.74.506.001/1500
round transparent blue 1.74.506.001/1600
Technical data see page 2 - 186
RAFIX 22 FS signal indicator, square collar
Pict.: red panel cut-out acc. to IEC 60947-5-1
Form of collar Colour of lens Order no. complete
square transparent colourless 1.74.506.051/1000
square transparent red 1.74.506.051/1300
square transparent yellow 1.74.506.051/1400
square transparent green 1.74.506.051/1500
square transparent blue 1.74.506.051/1600
Technical data see page 2 - 186
Accessories:
Legend insert blank: 5.70.806.000/2000
Accessories:
Legend insert blank: 5.70.806.000/2000
Stock items are marked
by bold printed order numbers.
2 - 188 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS contact blocks with gold contacts
Emergency stop contact block, gold contacts, 2 NCPict.: Universal contact block, 1 NC + 1 NO, gold contacts
General data
Illumination information:
The contact blocks are suitable for use with illuminated actuators: Insert the desired LED into the integrated LED base and
subsequently solder it together with the contact block.
We strongly recommend using the Rafi superbright LED since this ensures homogeneous illumination.
Technical data
General information
Lamp LED
Dimensions
Diameter 17.3 mm
Recommended key grid 30 mm
Mounting depth 9.2 mm
Mechanical design
Mounting soldering in PCB
Contact system bridgecontact self
cleaning
Contact materials Au
Contact arrangement see order block
NC contact forcibly
actuated acc. to IEC 60947-5-1 yes
Terminals solder terminal with
locating lug
Robustness 100 N
Electrica characteristics acc. to IEC 60947, AC-15
Operating voltage AC/DC 42 V
Operating current AC/DC 100 mA
Rated power max. 250 mW
Other specifications
Operating life 1 million at 10 mA/ 24 V
DC
Switching reliability at
24V/5mA DC 10 x 10-6
Approvals acc. to IEC 60947-5-x, 60204, 60073,
601058
Approvals, other UL 508, CSA, cURus
(UL + CSA)
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80
Colour of plunger see order block
Robustness acc. to IEC 60947-5-5
(TÜV)
Shock resistance acc. to
IEC 60068-2-27 50 g at 11 ms, amplitude
half sinusoidal
Resistance to vibrations
acc. to IEC 60068-2-6 5 g at 10 ... 500 Hz
Resistance to constant
environment IEC 600 68-2-3 and 2-30
Resistance at variable
environment IEC 600 68-2-14 and 2-33
Salt spray IEC 600 68-2-11
Solderability / solder
heat resistance IEC 600 68-2-20
Solder techniques wave solder bath /
manual soldering
Type see order block
Colour of housing grey
Stock items are marked
by bold printed order numbers.
Control components 2 - 189
2
RAFIX
22 FS
RAFIX 22 FS
3 mm LED superbright yellow 1.90.690.267/0000 5 - 21
3 mm LED superbright red 1.90.690.269/0000 5 - 21
3 mm LED superbright blue 1.90.690.282/0000 5 - 21
3 mm LED superbright green 1.90.690.285/0000 5 - 21
3 mm LED superbright white 1.90.690.295/0000 5 - 21
RAFIX 22 FS contact block with gold contacts
Pict.: Universal contact block, 1 NC + 1 NO, gold contacts Pict.: emergency stop contact block, 1 NC, gold contacts
Contact arrangement Colour of housing Order no. completeType Colour of plunger
1 NC Universal redgrey 1.20.126.001/0000
1 NO Universal greengrey 1.20.126.002/0000
1 NC + 1 NO Universal red and greengrey 1.20.126.003/0000
2 NC Universal redgrey 1.20.126.004/0000
2 NO Universal greengrey 1.20.126.005/0000
1 NC emergency stop redgrey 1.20.126.401/0000
1 NO emergency stop greengrey 1.20.126.402/0000
1 NC + 1 NO emergency stop yellowgrey 1.20.126.403/0000
2 NC emergency stop redgrey 1.20.126.404/0000
2 NO emergency stop greengrey 1.20.126.405/0000
Technical data see page 2 - 188
Caution: Emergency stop contact blocks can only be used with emergency stop pushbuttons. Universal contact blocks are not suitable
for emergency stop pushbuttons.
Description Photo Order no. Page
Accessories RAFIX 22 FS contact blocks with gold contacts
For additional accessories, refer to the chapter „RAFIX 22 FS special accessories“.
Stock items are marked
by bold printed order numbers.
2 - 190 Control components
2
RAFIX
22 FS
RAFIX 22 FS
RAFIX 22 FS contact blocks with silver contacts
Silver contacts, universal type, 1 NCPict.: Silver contacts, 1 NC + 1 NO
General data
Illumination information:
The contact blocks are suitable for use with illuminated actuators: Insert the desired LED into the integrated LED base and
subsequently solder it together with the contact block.
We strongly recommend using the Rafi superbright LED since this ensures homogeneous illumination.
Technical data
General information
Lamp LED
Dimensions
Diameter 17.3 mm
Recommended key grid 30 mm
Mounting depth 9.2 mm
Mechanical design
Mounting soldering in PCB
Contact system bridgecontact self
cleaning
Contact materials Ag
Contact arrangement see order block
NC contact forcibly
actuated acc. to IEC 60947-5-1 yes
Terminals solder terminal with
locating lug
Robustness 100 N
Electrica characteristics acc. to IEC 60947, AC-15
Rated insulation voltage
AC/DC 250 V
Rated peak voltage 2500 V
Rated operating current
IE, AC15 B300 3 A/120 V; 1.5 A/240 V;
Ithe: 5 A
Rated operating current
IE, DC13 Q300 550 mA/120 V; 270 mA/
240 V; Ithe: 2.5 A
Other specifications
Operating life at 250V /
1A 1000000
Operating life at 250V /
2A 100000
Operating life at 250V /
4A 70000
Switching reliability at
24V/5mA DC 10 x 10-6
Ambient temp. operating
min. -25 °C
Ambient temp. operating
max. +70 °C
Storage temperature min. -40 °C
Storage temperature max. +80 °C
Colour of plunger see order block
Approvals acc. to IEC 60947-5-x, 60204, 60073,
601058
Approvals, other UL 508, CSA, cURus
(UL + CSA)
Robustness acc. to IEC 60947-5-5
(TÜV)
Shock resistance acc. to
IEC 60068-2-27 50 g at 11 ms, amplitude
half sinusoidal
Resistance to vibrations
acc. to IEC 60068-2-6 5 g at 10 ... 500 Hz
Resistance to constant
environment IEC 600 68-2-3 and 2-30
Resistance at variable
environment IEC 600 68-2-14 and 2-33
Salt spray IEC 600 68-2-11
Solderability / solder
heat resistance IEC 600 68-2-20
Solder techniques wave solder bath /
manual soldering
Flame class acc. to UL 94 V 0
Hot wire ignition acc.
to IEC 60695-2-1 yes
Type see order block
Colour of housing black
Stock items are marked
by bold printed order numbers.
Control components 2 - 191
2
RAFIX
22 FS
RAFIX 22 FS
Description Photo Order no. Page
Accessories RAFIX 22 FS contact blocks with silver contacts
3 mm LED superbright yellow 1.90.690.267/0000 5 - 21
3 mm LED superbright red 1.90.690.269/0000 5 - 21
3 mm LED superbright blue 1.90.690.282/0000 5 - 21
3 mm LED superbright green 1.90.690.285/0000 5 - 21
3 mm LED superbright white 1.90.690.295/0000 5 - 21
RAFIX 22 FS contact blocks with silver contacts
Pict.: Universal, silver contacts, universal type, 1 NO Pict.: Universal, silver contacts, 1 NC + 1 NO
Contact arrangement Colour of housing Order no. completeType Colour of plunger
1 NC Universal redblack 1.20.126.201/0000
1 NO Universal greenblack 1.20.126.202/0000
1 NC + 1 NO Universal red and greenblack 1.20.126.203/0000
2 NC Universal redblack 1.20.126.204/0000
2 NO Universal greenblack 1.20.126.205/0000
1 NC emergency stop redblack 1.20.126.601/0000
1 NO emergency stop greenblack 1.20.126.602/0000
1 NC + 1 NO emergency stop yellowblack 1.20.126.603/0000
2 NC emergency stop redblack 1.20.126.604/0000
2 NO emergency stop greenblack 1.20.126.605/0000
Technical data see page 2 - 190
Caution: Emergency stop contact blocks can only be used with emergency stop pushbuttons. Universal contact blocks are not suitable
for emergency stop pushbuttons.
For additional accessories, refer to the chapter „RAFIX 22 FS special accessories“.
Stock items are marked
by bold printed order numbers.
2 - 192 Control components
2
RAFIX
22 FS
Ring nut
Pict.: black
Order no.Short text Feature 1 Feature 2
Ring nut (spare part) 5.24.279.014/0100
RAFIX 22 FS
RAFIX 22 FS special accessories
Blanking cap
Order no.Short text Feature 1 Feature 2
Blanking cap IP65, ring nut, square 5.05.800.068/0000
Blanking cap IP65, ring nut, round 5.05.800.067/0000
Description Photo Order no. Page
Accessories RAFIX 22 QR special accessories
Fixing spanner for ring nut and front ring 5.05.800.062/0000 5 - 25
LED base for signal indicators
Order no.Short text Frontring Feature 2
Plastic frontring black with protection cap black 5.05.004.986/0100
Plastic frontring red with protection cap red 5.05.004.986/0300
Plastic frontring yellow with protection cap yellow 5.05.004.986/0400
Plastic frontring green with protection cap green 5.05.004.986/0500
Plastic frontring blue with protection cap blue 5.05.004.986/0600
Plastic frontring slate grey with protection cap slate
grey
5.05.004.986/0700
Plastic frontring silver grey with protection cap silver
grey
5.05.004.986/0800
Stock items are marked
by bold printed order numbers.
Control components 2 - 193
2
RAFIX
22 FS
RAFIX 22 FS
LED base for signal indicators
Order no.Short text Feature 1 Feature 2
LED base for signal indicators 5.30.109.020/0756
Plastic frontring with protective cap
