EXA40 Series Single output DC-DC CONVERTERS 40 W High Efficiency DC-DC Converters 1 * High efficiency topology, 91% typical at 5 V * Approved to EN60950, UL1950, CSA C22.2 No. 950 * Operating ambient temperature of -40 C to +70 C (natural convection) * Complies with ETS 300 019-1-3/2-3 * Complies with ETS 300 132-2 input voltage and current requirements * Fully compliant with ETS 300 386-1 * RoHS Compliant The EXA40 Series, comprising 8 different models is targeted specifically at the telecommunications, industrial electronics, mobile Telecommunications and distributed power markets. The series offers two wide input voltage ranges of 18 Vdc to 36 Vdc and 36 Vdc to 75 Vdc. Typical efficiencies are 91% for the 5 V output, 88% for the 3.3 V, 86% for the 2.75 V and 84% for the 1.8 V. The series has been designed primarily for Telecommunications applications and complies with ETS 300 386-1 immunity and emission standards for high priority of service class. In addition the series complies with ETS 300 019-1-3 environmental standards (all classes) including shock, vibration, humidity and thermal performance. A high level of reliability has been designed into all models through the extensive use of conservative derating criteria. Remote enable and overtemperature shutdown are included as standard while true latching OVP is available as an option. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability (See Note 10) EMC CHARACTERISTICS (Cont.) 2.75 V, 3.3 V, 5 V 1.8 V output 10% min. +12/-17% min. Voltage accuracy 1.0% Line regulation Low line to high line +0.05% Load regulation Full load to no load +0.20% Minimum load 0% Ripple and noise 20 MHz bandwidth 100 mV pk-pk max. 20 mV rms max. Temperature coefficient Transient response Peak dev. settling time 0.01%/C 50% to 75% and back to 1.0%, no external cap. Short circuit protection (See Note 5) 100 mV 250 s Continuous automatic recovery INPUT SPECIFICATIONS Input voltage range 24 Vin nominal 48 Vin nominal Input current No load Remote OFF UVLO turn ON voltage UVLO turn OFF voltage All inputs (See Note 4) All inputs (See Note 4) Start-up time Nominal line Active high remote ON/OFF Logic compatibility ON OFF Open circuit voltage 18-36 Vdc 36-75 Vdc 100 mA max. 4 mA max. 94% 86% 50 ms Open Collector ref. to -input 4.5 Vdc <1.0 Vdc INPUT SPECIFICATIONS ETS 300 386-1 table 5 Conducted emissions (See Design Note 102) EN55022, internal filter and two 4 F film capacitors EN55022, external filter Level A Level B Radiated emissions ESD air ESD contact Surge (500 V) Fast transients Radiated immunity Conducted immunity EN55022 (See Design Note 102) Level B EN61000-4-2, level 3 EN61000-4-2, level 4 EN61000-4-5, level 3, 4 EN61000-4-4, level 3, 4 EN61000-4-3, level 3 EN61000-4-6, level 3 GENERAL SPECIFICATIONS Efficiency Basic insulation Input fuse 24 V Input fuse 48 V Switching frequency Approvals and standards (See Notes 7, 8, 9) Weight MTBF (See Design Note 102) Input/output (See Note 8) Fixed MIL-HDBK-217 See table 1500 Vdc 3.5 A slow blow 2.0 A slow blow 300 kHz EN60950 UL1950 CSA C22.2 No. 950 25 g (0.88 oz) 250,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient -40 C to +70 C, temperature See curves Non-operating -55 C to +105 C Over temperature Loss of Function 75 C to +85 C shutdown Self-Recovery (LFS) ETS 300 019-2-3 Classes T3.1 to T3.5 Air temperature Low: IEC 68-2-1 -40 C High: IEC 68-2-2 +70 C Change: IEC 68-2-1 -40 C to +70 C Relative humidity IEC 68-2-56 10% to 100% RH IEC 68-2-30 Condensation Vibration, Class 3M5 IEC68-2-6 2-9 Hz, 3 mm disp. 9-200 Hz 1 g MIL-STD-202F Method 204 cond. A Shock, Class 3M5 IEC-68-2-29 MIL-STD-202F Method 213B cond. A File Name: exa40.pdf Rev (02): 09 Dec 2005 EXA40 Series Single output DC-DC CONVERTERS 40 W High Efficiency DC-DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm INPUT VOLTAGE OUTPUT VOLTAGE (2) NOMINAL OUTPUT VOLTAGE OUTPUT CURRENT (MAX.) TYPICAL EFFICIENCY MODEL NUMBER (1,3,11,12) Vdc 1.5-2.0 V 1.8 V 8.0 A 84% EXA40-24S1V8J 18-36 Vdc 2.5-3.0 V 2.75 V 8.0 A 87% EXA40-24S2V75J 18-36 Vdc 3.0-3.6 V 3.3 V 8.0 A 88% EXA40-24S3V3J 18-36 Vdc 4.5- 5.5 V 5.0 V 8.0 A 90% EXA40-24S05J 36-75 Vdc 1.5-2.0 V 1.8 V 8.0 A 84% EXA40-48S1V8J 36-75 Vdc 2.5-3.0 V 2.75 V 8.0 A 86% EXA40-48S2V75J 36-75 Vdc 3.0-3.6 V 3.3 V 8.0 A 88% EXA40-48S3V3J 36-75 Vdc 4.5 -5.5 V 5.0 V 8.0 A 91% EXA40-48S05J 11,12) 18-36 Notes 1 True latching OVP is available as an option. Please add the suffix `-V' to the model number, e.g. EXA40-24S1V8-VJ. Additional alphanumeric suffixes maybe added to indicate minor modifications not affecting the safety approvals. 2 Gauranteed minimum output voltage range. 3 Latching OVP response time is 1 ms (typical). OVP latch is reset by toggling remote ON/OFF or by recycling the input voltage. 4 Figures are percentage of minimum input voltage. 5 Rshort 20 m. 6 TVS spec : 6V8 @ 10 mA, 10V5 @ 57 A 4V1 @ 1 mA, 7V3 @ 50 A 7 Maximum continuous output power. 40 Watts for S05J models 26.4 Watts for S3V3J models 22 Watts for S2V75J models 14.4 Watts for S1V8J models. 8 User must provide recommended fuses in order to comply with safety approvals. 9 Maximum temperature on components Q100, Q102 and Q103 not to exceed 120 C. See Application Note 101 for details. 10 For continuous operation below 88%, minimum input voltage trimming up >5% is not recommended on the 24S05J and 48S05J models. 11 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. EXTERNAL OUTPUT TRIMMING (10) All models can be externally trimmed by using the method shown below. 6 6 TRIM DOWN RTD 8 8 10K TRIMPOT 10K 8 TRIM UP 7 DERATING CURVE Output Power (%) RTU 7 EXA40-24S05 All other Models Output Power (%) 100% 75% 50% 25% 27.5% 0% -40C -30C-20C -10C 0C 10C 20C 30C 40C 50C 60C 70C 80C 90C 100C AMBIENT TEMPERATURE (C) Figure 1: Natural Convection (0.1m/s) Typical derating, See Application Note. File Name: exa40.pdf Rev (02): 09 Dec 2005 EXA40 Series Single output DC-DC CONVERTERS 40 W High Efficiency DC-DC Converters 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 2.042 (51.88) 0.142 (3.60) 1.000 (25.40) 0.100 (2.54) 0.200 (5.08) o0.040 0.002 (o1.02) 0.05 0.300 (7.62) 6 2.003 (50.88) 1 0.600 (15.24) 2 2.200 0.02 (55.88 0.5) 0.700 (17.78) 7 4 1.200 (30.48) 8 0.200 (5.08) 0.020 (0.50) 1.800 (45.72) BOTTOM VIEW ALL DIMENSIONS IN INCHES (MM) 2.200 0.02 (55.88 0.5) General tolerance 0.010 (0.25) unless otherwise specified 0.398 0.012 (10.10 0.3) PIN CONNECTIONS PIN NO. SINGLE OUTPUT 1 + Input 2 - Input 4 Remote ON/OFF 6 + Output 7 - Output 8 Trim International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950 File No. E174104 VDE Certificate No.112836. File No. 10401-3336-0129 CB Report and Certificate to IEC60950, Certificate No. DE1-31103 Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: exa40.pdf Rev (02): 09 Dec 2005