https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Cable lug connection, number of positions: 1, load current: 76 A, cross section: 6 mm-25 mm, connection direction of the conductor to plug-in direction: -90 , width: 12.1 mm, color: gray The figure shows a 7-position version Your advantages Easy grouping with engagement pin versions Both terminal halves can be easily assembled by simply snapping them together Touch-proof insulating housing in a new design Molded versions ensure maximum tightness of seal Universal screw connection with screw locking Spacer plates increase clearances and creepage distances Automatic compensation of the panel thickness via the snap principle integrated in the insulation housing Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Tool-free snap-in principle enables easy mounting on the device panel Automatic panel thickness compensation enables universal use Reliable seal even with low-viscosity molding compounds Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356344784 Weight per Piece (excluding packing) 30.000 g Custom tariff number 85369010 Country of origin China 05/29/2020Page1/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Technical data Item properties Brief article description Panel feed-through terminal block Range of articles UWV 16-POT Pitch 12.1 mm Number of positions 1 Connection method Screw connection with tension sleeve Number of connections 2 Number of potentials 1 Electrical parameters Nominal current 76 A Nom. voltage 500 V Rated voltage 500 V Rated surge voltage (III/3) 6 kV Connection capacity, external Connection method Screw connection with tension sleeve Connection direction of the conductor to plug-in direction -90 Conductor cross section solid 6 mm ... 25 mm Conductor cross section flexible 6 mm ... 16 mm Conductor cross section flexible, with ferrule without plastic sleeve 6 mm ... 16 mm Conductor cross section, flexible, with ferrule, with plastic sleeve 6 mm ... 16 mm 2 conductors with same cross section, solid 2.5 mm ... 10 mm 2 conductors with same cross section, flexible 2.5 mm ... 6 mm 2 conductors with same cross section, flexible, with ferrule without plastic sleeve 4 mm ... 6 mm 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 4 mm ... 6 mm Internal cylindrical gage B7 Stripping length 16 mm Torque 2.5 Nm ... 3 Nm Connection capacity, internal Connection method Cable lug connection Connection direction of the conductor to plug-in direction 0 Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/ JEDEC JESD 201 Contact material Cu alloy Surface characteristics tin-plated 05/29/2020Page2/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Technical data Material data - housing Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN60695-2-12 850 Glow wire ignition temperature GWIT according to EN60695-2-13 775 Temperature for the ball pressure test according to EN60695-10-2 125 C Dimensions for the product Width [ w ] 12.1 mm Pitch 12.1 mm Packaging information Pieces per package 50 Denomination packing units Pcs. General product information Type of note Notes on safety Note on application Note The cable entry funnel is not touch-proof. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch proofness. To maintain the nominal voltage, align the cable lugs straight and centered, and cast the terminals on the inside. Termination and connection method Test for conductor damage and slackening IEC60947-7-1:2009-04 Test passed Pull-out test Pull-out test IEC60947-7-1:2009-04 Test passed Mechanical tests according to standard Test specification IEC 60947-7-1 (following) Electrical tests Rated current 76 A Conductor cross section 16 mm Air clearances and creepage distances Clearances and creepage distances without spacer plate IEC60947-7-1:2009-04 Application without spacer plate 05/29/2020Page3/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Technical data Air clearances and creepage distances Specification IEC60947-7-1:2009-04 Minimum clearance - inhomogeneous field (III/3) 5.5 mm Minimum creepage distance value (III/3) 6.3 mm Temperature-rise test Result Test passed Specification IEC60947-7-1:2009-04 Current carrying capacity / derating curves Specification IEC 60947-7-1 (following) Standards and Regulations Connection in acc. with standard UL IEC60947-7-1 Flammability rating according to UL 94 V0 Safety note * WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. * The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. * The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection. * To maintain the nominal voltage, align the cable lugs straight and centered, and cast the terminals on the inside. Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings 05/29/2020Page4/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Dimensional drawing * Only when using the UW...F flange plate ** Dimensions when using the DP-UW... spacer plate Dimensional drawing 05/29/2020Page5/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Classifications eCl@ss eCl@ss 10.0.1 27141134 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 eCl@ss 9.0 27141134 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC001283 ETIM 5.0 EC001283 ETIM 6.0 EC001283 ETIM 7.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / EAC / cULus Recognized Ex Approvals 05/29/2020Page6/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Approvals Approval details CSA http://www.csagroup.org/services-industries/product-listing/ B C Nominal voltage UN 600 V 600 V Nominal current IN 80 A 80 A mm/AWG/kcmil 10-4 10-4 2618381-158887 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-20100423 B C Nominal voltage UN 600 V 600 V Nominal current IN 85 A 85 A mm/AWG/kcmil 10-4 10-4 Accessories Accessories Screwdriver tools Screwdriver-SZS 1,0X4,0 VDE-1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip Terminal marking 05/29/2020Page7/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Accessories Marker for terminal blocks-UC-TM 12-0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Marker for terminal blocks-UC-TMF 12-0819233 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 5.1 mm, Number of individual labels: 40 Zack marker strip-ZB 12:UNPRINTED-0812120 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm, Number of individual labels: 5 Zack Marker strip, flat-ZBF 12:UNBEDRUCKT-0809735 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 12 mm, lettering field size: 5.15 x 12.15 mm, Number of individual labels: 5 Marker for terminal blocks-TMT 100 R-0816605 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, unperforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 100 mm, lettering field size: 6.35 x 101.5 mm, Number of individual labels: 1000 05/29/2020Page8/9 https://www.phoenixcontact.com/us/products/3073542 Panel feed-through terminal block-UWV 16-POT-3073542 Accessories Marker for terminal blocks-TMT (EX9,5)R-0828295 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x 50000 mm, Number of individual labels: 1 Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 05/29/2020Page9/9