e3
DS21220 Rev. 8 - 2 1 of 3 GBJ20005-GBJ2010
www.diodes.com ãDiodes Incorporated
Features
GBJ20005 - GBJ2010
20A GLASS PASSIVATED BRIDGE RECTIFIER
GBJ
Dim Min Max
A29.70 30.30
B19.70 20.30
C17.00 18.00
D3.80 4.20
E7.30 7.70
G9.80 10.20
H2.00 2.40
I0.90 1.10
J2.30 2.70
K3.0 X 45°
L4.40 4.80
M3.40 3.80
N3.10 3.40
P2.50 2.90
R0.60 0.80
S10.80 11.20
All Dimensions in mm
_
B
C
D
EEG
H
K
J
I
L
M
N
P
R
S
A
Characteristic Symbol GBJ
20005
GBJ
2001
GBJ
2002
GBJ
2004
GBJ
2006
GBJ
2008
GBJ
2010 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Forward Rectified Output Current @ TC= 110°C IO20 A
Non-Repetitive Peak Forward Surge Current, 8.3 ms single
half-sine-wave superimposed on rated load IFSM 240 A
Forward Voltage per element @ IF= 10A VFM 1.05 V
Peak Reverse Current @ TA= 25°C
at Rated DC Blocking Voltage @ TC= 125°C IR10
500 µA
I2t Rating for Fusing (t < 8.3 ms) (Note 1) I2t 240 A2s
Typical Total Capacitance per Element (Note 2) CT60 pF
Typical Thermal Resistance Junction to Case (Note 3) RqJC 0.8 °C/W
Operating and Storage Temperature Range Tj,T
STG -55 to +150 °C
·Case: GBJ
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Plated Leads, Solderable per MIL-STD-202,
Method 208
·Lead Free Plating (Tin Finish).
·Polarity: Molded on Body
·Mounting: Through Hole for #6 Screw
·Mounting Torque: 5.0 in-lbs Maximum
·Marking: Type Number
·Weight: 6.6 grams (approximate)
Mechanical Data
·Glass Passivated Die Construction
·High Case Dielectric Strength of 1500VRMS
·Low Reverse Leakage Current
·Surge Overload Rating to 240A Peak
·Ideal for Printed Circuit Board Applications
·UL Listed Under Recognized Component
Index, File Number E94661
·Lead Free Finish/RoHS Compliant (Note 4)
Single phase, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Ratings and Electrical Characteristics @ TA= 25°C unless otherwise specified
Notes: 1. Non-repetitive, for t > 1ms and < 8.3 ms.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
3. Unit mounted on 300 x 300 x 1.6mm Cu plate heat sink.
4. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex Notes 5 and 7.
DS21220 Rev. 8 - 2 2 of 3 GBJ20005-GBJ2010
www.diodes.com
0.01
0.1
1.0
10
00.4 0.8 1.2 1.6 2.0
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fi
g
.2 T
y
pical Forward Characteristics
(
per element
)
F
I , INSTANTANEOUS FORWARD CURRENT (A)
F
100
T=25°C
j
100
50
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fi
g
. 3 Maximum Non-Repetitive Sur
g
e Current
150
2
5
0
0
200
Single half-sine-wave
T=25°C
j
10
100
1
1 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
Fi
g
.4 T
y
pical Total Capacitance, Per Element
R
f=1MHz
T=25°C
j
0.1
1.0
10
100
1000
020 40 60 80 100
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fi
g
.5 T
y
pical Reverse Characteristics
T=50°C
j
T = 125°C
j
T = 100°C
j
T=25°C
j
0
5
25 50 75 100 125 150
I , AVERAGE RECTIFIED CURRENT (A)
O
T , CASE TEMPERATURE (°C)
Fi
g
. 1 Forward Current Deratin
g
Curve
C
10
15
20
2
5
Without heatsink
With heatsink
Resistive or
Inductive load
Notes: 5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap2008.pdf.
DS21220 Rev. 8 - 2 3 of 3 GBJ20005-GBJ2010
www.diodes.com
Ordering Information
Device Packaging Shipping
GBJ20005-F GBJ 15/Tube
GBJ2001-F GBJ 15/Tube
GBJ2002-F GBJ 15/Tube
GBJ2004-F GBJ 15/Tube
GBJ2006-F GBJ 15/Tube
GBJ2008-F GBJ 15/Tube
GBJ2010-F GBJ 15/Tube
(Note 5)
IMPORTANT NOTICE
LIFE SUPPORT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
