THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
SALES ASSY-HIGH TEMP.
DUAL ROW, .025" SQ PINS .100" GRID W/ RET. PINS
PRODUCT CUSTOMER DRAWING
DOCUMENT NUMBER
DOC TYPE
DOC PART
REVISION
SD-70287-003
PSD
001
B2
MATERIAL NUMBER CUSTOMER SHEET NUMBER
SEE CHART GENERAL MARKET 1 OF 2
CURRENT REV DESC: MIGRATED TO NX
EC NO: 614461
DRWN:
ABABU01
2019/03/12
CHK'D:
NMANE02
2019/03/26
APPR:
MRAMAKRISHNA
2019/03/26
INITIAL REVISION:
DRWN:
ADERR
2006/09/01
APPR:
FSMITH
2006/09/05
THIRD ANGLE PROJECTION
DRAWING SERIES
C-SIZE
70287
DIMENSION UNITS
SCALE
MM/INCH
NTS
GENERAL TOLERANCES
(UNLESS SPECIFIED)
MM INCH
4 PLACES
± ±
3 PLACES
± ±
0.005
2 PLACES
±
0.13
±
0.01
1 PLACE
±
0.25
±
0 PLACES
± ±
ANGULAR TOL
±
0.5 °
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
FORMAT: Eng-lega-master-tb-prod-C
REVISION: D
DATE: 2018/01/18
DOCUMENT STATUS P1 RELEASE DATE 2019/03/26 12:56:09
PARTS LISTED ON THIS DRAWING REPLACES PARTS LISTED ON
DRAWING SDA-70287-0001-5000 WHICH WILL BECOME OBSOLETE.
NUMBER OF CIRCUITS
IN ROW B RETENTIVE TAIL LOCATIONS
EVEN NUMBER 2 PINS IN THE MIDDLE OF ROW B
ODD NUMBER
PIN IN THE CENTER OF ROW B AND
ONE OTHER PIN IN ROW B ON
EITHER SIDE OF THE CENTER PIN
1. MATERIAL: WAFER - GLASS FILLED LIQUID CRYSTAL POLYMER, UL94V-0, COLOR: BLACK
PIN - COPPER ALLOY
2. FINISH: (TIN) OVERALL TIN: 0.00381/[.000150] MIN.,
OVERALL NICKEL UNDERPLATE: 0.00127/[.000050] MIN.
(15 GOLD) SELECT GOLD: 0.00038/[.000015] MIN.,
SELECT TIN: 0.00191/[.000075] MIN,.
OVERALL NICKEL UNDERPLATE: 0.00127/[.000050] MIN.
(30 GOLD) SELECT GOLD: 0.00076/[.000030] MIN.,
SELECT TIN: 0.00191/[.000075] MIN,.
OVERALL NICKEL UNDERPLATE: 0.00127/[.000050] MIN.
3. PRODUCT SPECIFICATION: PS-70280
4. PACKAGING INFORMATION: (UNLESS OTHERWISE NOTED IN TABLES)
PARTS TO BE PACKAGED PER PK-70873-0353.
5. MEASURE POINT FOR PLATING THICKNESS. DIMENSION D
IS ALSO THE MEASURE POINT FOR PIN WIDTH.
6. RETENTIVE TAIL LOCATIONS (SEE VIEW "A")
7. PIN PUSHOUT FORCE: 3 LBS. MIN. (IN EITHER DIRECTION)
8. FOR ILLUSTRATION PURPOSES, 20 (DUAL 10) CIRCUIT SIZE IS SHOWN.
9. PINS MUST MEET SOLDERABILITY SPEC. SMES-152, EXCEPT VOIDS
ARE PERMISSIBLE AT BANDOLIER PIN FAYING SURFACE.
(APPROXIMATELY 0.64/[.025] LNG X 0.15/[.006] WIDE AT 2 LOCATIONS)
10. PARTS CONFORM TO CLASS B REQUIREMENTS OF COSMETIC
SPECIFICATION PS-45499-002.
CKT.
SIZE
DIM. A REF. DIM. B REF.
MM INCH MM INCH
45.08 .200 2.54 .100
67.62 .300 5.08 .200
810.16 .400 7.62 .300
10 12.70 .500 10.16 .400
12 15.24 .600 12.70 .500
14 17.78 .700 15.24 .600
16 20.32 .800 17.78 .700
18 22.86 .900 20.32 .800
20 25.40 1.000 22.86 .900
22 27.94 1.100 25.40 1.000
24 30.48 1.200 27.94 1.100
26 33.02 1.300 30.48 1.200
28 35.56 1.400 33.02 1.300
30 38.10 1.500 35.56 1.400
32 40.64 1.600 38.10 1.500
34 43.18 1.700 40.64 1.600
36 45.72 1.800 43.18 1.700
38 48.26 1.900 45.72 1.800
40 50.80 2.000 48.26 1.900
42 53.34 2.100 50.80 2.000
44 55.88 2.200 53.34 2.100
46 58.42 2.300 55.88 2.200
48 60.96 2.400 58.42 2.300
50 63.50 2.500 60.96 2.400
52 66.04 2.600 63.50 2.500
54 68.58 2.700 66.04 2.600
56 71.12 2.800 68.58 2.700
58 73.66 2.900 71.12 2.800
60 76.20 3.000 73.66 2.900
62 78.74 3.100 76.20 3.000
64 81.28 3.200 78.74 3.100
66 83.82 3.300 81.28 3.200
68 86.36 3.400 83.82 3.300
70 88.90 3.500 86.36 3.400
72 91.44 3.600 88.90 3.500
74 93.98 3.700 91.44 3.600
76 96.52 3.800 93.98 3.700
78 99.06 3.900 96.52 3.800
80 101.06 4.000 99.06 3.900
82 104.14 4.100 101.06 4.000
84 106.68 4.200 104.14 4.100
86 109.22 4.300 106.68 4.200
88 111.76 4.400 109.22 4.300
90 114.30 4.500 111.76 4.400
92 116.84 4.600 114.30 4.500
94 119.38 4.700 116.84 4.600
96 121.92 4.800 119.38 4.700
98 124.46 4.900 121.92 4.800
100 127.00 5.000 124.46 4.900
PCB LAYOUT: COMPONENT SIDE
TYPICAL PCB THICKNESS: 1.57/[.062]
1.14 TYP.
±
0.05
.045
±
.002
⌀
TYP.
(NON-ACCUM.)
2.54
±
0.05
.100
±
.002
2.54
±
0.05
.100
±
.002
D
SEE NOTE 5
0.20 REF.
.008
SEE DETAIL Y
⌖
⌀
0.25/[.010] U
REF.2.54
.100
A
A
+0.64
-0.38
+0.025
-0.015
3
U
SECTION Z-Z - RETENTION PIN DETAIL
2 CONTACTS LOCATED ON CENTER OF SAME ROW
(SEE NOTE 6)
EREF.
EREF.
1.40 REF.
.055
...
1
⌖
⌀
0.30/[.012] U
LREF.
DETAIL Y
SCALE 30:1
REF.1.27
.050
0.625
SEE NOTE 5
±
0.015
.0246
±
.0006
REF.5.08
.200
3
Z
2.54 TYP.
.100
2.54
.100
2
REF.2.29
.090
REF.0.43
.017
ROW "A"
Z
C
C
±
0.25
±
0.010
2
ROW "B"
1
F
SEE NOTE 5
VIEW A
BREF.
...
NOTES:
1
A
1
A
2
B
2
B
3
C
3
C
4
D
4
D
5
E
5
E
6
F
6
F
7
G
7
G
8
H
8
H
9
9
10
10
11
11
12
12
SALES ASSY-HIGH TEMP.
DUAL ROW, .025" SQ PINS .100" GRID W/ RET. PINS
PRODUCT CUSTOMER DRAWING
DOCUMENT NUMBER
DOC TYPE
DOC PART
REVISION
SD-70287-003
PSD
001
B2
MATERIAL NUMBER CUSTOMER SHEET NUMBER
SEE CHART GENERAL MARKET 2 OF 2
CURRENT REV DESC: MIGRATED TO NX
EC NO: 614461
DRWN:
ABABU01
2019/03/12
CHK'D:
NMANE02
2019/03/26
APPR:
MRAMAKRISHNA
2019/03/26
INITIAL REVISION:
DRWN:
ADERR
2006/09/01
APPR:
FSMITH
2006/09/05
THIRD ANGLE PROJECTION
DRAWING SERIES
C-SIZE
70287
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
DIMENSION UNITS
SCALE
MM/INCH
NTS
GENERAL TOLERANCES
(UNLESS SPECIFIED)
MM INCH
4 PLACES
± ±
3 PLACES
± ±
0.005
2 PLACES
±
0.13
±
0.01
1 PLACE
±
0.25
±
0 PLACES
± ±
ANGULAR TOL
±
0.5 °
DRAFT WHERE APPLICABLE
MUST REMAIN
WITHIN DIMENSIONS
FORMAT: Eng-lega-master-tb-prod-C
REVISION: D
DATE: 2018/01/18
DOCUMENT STATUS P1 RELEASE DATE 2019/03/26 12:56:09
ENG. NO: A-70287-1049 / 1097
DIM. C 8.13/[.320]
DIM. E (REF.) 3.18/[.125]
DIM. L (REF.) 13.59/[.535]
MATING SIDE PLATING TIN
DIM. D (MEASURE PT.) 4.57/[.180]
P.C. BOARD SIDE PLATING TIN
DIM. F (MEASURE PT.) 1.27/[.050]
RETENTIVE PIN LOCATION SEE NOTE 6, SHEET 1
PACKAGING BULK - PK-70873-0353
CKTS MATERIAL NUMBER CKTS MATERIAL NUMBER
04 70287-1049 54 70287-1074
06 70287-1050 56 70287-1075
08 70287-1051 58 70287-1076
10 70287-1052 60 70287-1077
12 70287-1053 62 70287-1078
14 70287-1054 64 70287-1079
16 70287-1055 66 70287-1080
18 70287-1056 68 70287-1081
20 70287-1057 70 70287-1082
22 70287-1058 72 70287-1083
24 70287-1059 74 70287-1084
26 70287-1060 76 70287-1085
28 70287-1061 78 70287-1086
30 70287-1062 80 70287-1087
32 70287-1063 82 70287-1088
34 70287-1064 84 70287-1089
36 70287-1065 86 70287-1090
38 70287-1066 88 70287-1091
40 70287-1067 90 70287-1092
42 70287-1068 92 70287-1093
44 70287-1069 94 70287-1094
46 70287-1070 96 70287-1095
48 70287-1071 98 70287-1096
50 70287-1072 100 70287-1097
52 70287-1073
ENG. NO: A-70287-1147 / 1195
DIM. C 8.13/[.320]
DIM. E (REF.) 3.18/[.125]
DIM. L (REF.) 13.59/[.535]
MATING SIDE PLATING 15 GOLD
DIM. D (MEASURE PT.) 4.57/[.180]
P.C. BOARD SIDE PLATING TIN
DIM. F (MEASURE PT.) 1.27/[.050]
RETENTIVE PIN LOCATION SEE NOTE 6, SHEET 1
PACKAGING BULK - PK-70873-0353
CKTS MATERIAL NUMBER CKTS MATERIAL NUMBER
04 70287-1147 54 70287-1172
06 70287-1148 56 70287-1173
08 70287-1149 58 70287-1174
10 70287-1150 60 70287-1175
12 70287-1151 62 70287-1176
14 70287-1152 64 70287-1177
16 70287-1153 66 70287-1178
18 70287-1154 68 70287-1179
20 70287-1155 70 70287-1180
22 70287-1156 72 70287-1181
24 70287-1157 74 70287-1182
26 70287-1158 76 70287-1183
28 70287-1159 78 70287-1184
30 70287-1160 80 70287-1185
32 70287-1161 82 70287-1186
34 70287-1162 84 70287-1187
36 70287-1163 86 70287-1188
38 70287-1164 88 70287-1189
40 70287-1165 90 70287-1190
42 70287-1166 92 70287-1191
44 70287-1167 94 70287-1192
46 70287-1168 96 70287-1193
48 70287-1169 98 70287-1194
50 70287-1170 100 70287-1195
52 70287-1171
ENG. NO: A-70287-1245 / 1293
DIM. C 8.13/[.320]
DIM. E (REF.) 3.18/[.125]
DIM. L (REF.) 13.59/[.535]
MATING SIDE PLATING 30 GOLD
DIM. D (MEASURE PT.) 4.57/[.180]
P.C. BOARD SIDE PLATING TIN
DIM. F (MEASURE PT.) 1.27/[.050]
RETENTIVE PIN LOCATION SEE NOTE 6, SHEET 1
PACKAGING BULK - PK-70873-0353
CKTS MATERIAL NUMBER CKTS MATERIAL NUMBER
04 70287-1245 54 70287-1270
06 70287-1246 56 70287-1271
08 70287-1247 58 70287-1272
10 70287-1248 60 70287-1273
12 70287-1249 62 70287-1274
14 70287-1250 64 70287-1275
16 70287-1251 66 70287-1276
18 70287-1252 68 70287-1277
20 70287-1253 70 70287-1278
22 70287-1254 72 70287-1279
24 70287-1255 74 70287-1280
26 70287-1256 76 70287-1281
28 70287-1257 78 70287-1282
30 70287-1258 80 70287-1283
32 70287-1259 82 70287-1284
34 70287-1260 84 70287-1285
36 70287-1261 86 70287-1286
38 70287-1262 88 70287-1287
40 70287-1263 90 70287-1288
42 70287-1264 92 70287-1289
44 70287-1265 94 70287-1290
46 70287-1266 96 70287-1291
48 70287-1267 98 70287-1292
50 70287-1268 100 70287-1293
52 70287-1269
1
A
1
A
2
B
2
B
3
C
3
C
4
D
4
D
5
E
5
E
6
F
6
F
7
G
7
G
8
H
8
H
9
9
10
10
11
11
12
12
!
"
# # $# #
%&'&%"()")&
*'"+,+
*, *+"',"
*, *"+),+
*, *(&,"'
#
*, *"&,
-"
$ #$%$%&'&+%++
$
#
$ #
( &'&%"()
( &'&%"&(
- &'&%"
- &'&%"&
' &'&%""
' &'&%"&-
" &'&%"
- &'&%"&&
" &'&%"+
- &'&%"&'
"( &'&%"(
-( &'&%"&)
"- &'&%"
-- &'&%"'
"' &'&%"-
-' &'&%"'"
&'&%"&
& &'&%"'
&'&%"'
& &'&%"'+
( &'&%")
&( &'&%"'(
- &'&%"-
&- &'&%"'
' &'&%"-"
&' &'&%"'-
+ &'&%"-
' &'&%"'&
+ &'&%"-+
' &'&%"''
+( &'&%"-(
'( &'&%"')
+- &'&%"-
'- &'&%")
+' &'&%"--
'' &'&%")"
( &'&%"-&
) &'&%")
( &'&%"-'
) &'&%")+
(( &'&%"-)
)( &'&%")(
(- &'&%"&
)- &'&%")
(' &'&%"&"
)' &'&%")-
&'&%"&
" &'&%")&
&'&%"&+
%&'&%""(&"")
*'"+,+
*, *+"',"
*, *"+),+
"
*, *(&,"'
#
*, *"&,
-"
$ #$%$%&'&+%++
$
#
$ #
( &'&%""(&
( &'&%""&
- &'&%""('
- &'&%""&+
' &'&%""()
' &'&%""&(
" &'&%""
- &'&%""&
" &'&%"""
- &'&%""&-
"( &'&%""
-( &'&%""&&
"- &'&%""+
-- &'&%""&'
"' &'&%""(
-' &'&%""&)
&'&%""
& &'&%""'
&'&%""-
& &'&%""'"
( &'&%""&
&( &'&%""'
- &'&%""'
&- &'&%""'+
' &'&%"")
&' &'&%""'(
+ &'&%""-
' &'&%""'
+ &'&%""-"
' &'&%""'-
+( &'&%""-
'( &'&%""'&
+- &'&%""-+
'- &'&%""''
+' &'&%""-(
'' &'&%""')
( &'&%""-
) &'&%"")
( &'&%""--
) &'&%"")"
(( &'&%""-&
)( &'&%"")
(- &'&%""-'
)- &'&%"")+
(' &'&%""-)
)' &'&%"")(
&'&%""&
" &'&%"")
&'&%""&"
!
"
# # $# #
%&'&%"(")+
*'"+,+
*, *+"',"
*, *"+),+
+
*, *(&,"'
#
*, *"&,
-"
$ #$%$%&'&+%++
$
#
$ #
( &'&%"(
( &'&%"&
- &'&%"(-
- &'&%"&"
' &'&%"(&
' &'&%"&
" &'&%"('
- &'&%"&+
" &'&%"()
- &'&%"&(
"( &'&%"
-( &'&%"&
"- &'&%""
-- &'&%"&-
"' &'&%"
-' &'&%"&&
&'&%"+
& &'&%"&'
&'&%"(
& &'&%"&)
( &'&%"
&( &'&%"'
- &'&%"-
&- &'&%"'"
' &'&%"&
&' &'&%"'
+ &'&%"'
' &'&%"'+
+ &'&%")
' &'&%"'(
+( &'&%"-
'( &'&%"'
+- &'&%"-"
'- &'&%"'-
+' &'&%"-
'' &'&%"'&
( &'&%"-+
) &'&%"''
( &'&%"-(
) &'&%"')
(( &'&%"-
)( &'&%")
(- &'&%"--
)- &'&%")"
(' &'&%"-&
)' &'&%")
&'&%"-'
" &'&%")+
&'&%"-)
