PA1005QNL Series
Height: 5.5mm Max
Footprint: 8.4mm x 7.2mm Max
Current Rating: up to 20A
Frequency Range: 50kHz to 1MHz
1. The temperature of component (ambient temperature plus temper-ature rise) must be within the
specified operating temperature range.
2. The maximum current rating is based upon temperature rise of the component and represents the
DC current which will cause a typical temperature rise of 40°C with no airflow when both one turn
windings connected in parallel.
3. To calculate value of terminating resistor (Rt) use the following formula:
Rt (W) = Vref * N / (Ipeak_primary)
4. The peak flux density of the device must remain below 2000 Gauss. To calculate the peak flux den-
sity for uni-polar current use following formula:
Bpk = 37.59 * Vref * (Duty_Cycle_Max) * 105 / (N * Freq_kHz)
* for bi-polar current applications divide Bpk (as calculated above) by 2.
5. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e.
PA1005.020QNL becomes PA1005.020QNLT). Pulse complies to industry standard tape and reel
specification EIA481.
6. The “NL” suffix indicates an RoHS-compliant part number.
NOTES:
Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C
Part 5,6
Number Turns
Ratio
Current2
Rating
(A)
Secondary
Inductance
(mH MIN)
DCR (mΩ Max) Hipot
(VRMS)
Primary
(8-7) Secondary
(1-3)
PA1005.020QNL 1:20 20 0.08 0.75 550 900
PA1005.030QNL 1:30 20 0.18 0.75 870 900
PA1005.040QNL 1:40 20 0.32 0.75 1140 900
PA1005.050QNL 1:50 20 0.50 0.75 1500 900
PA1005.060QNL 1:60 20 0.72 0.75 2250 900
PA1005.070QNL 1:70 20 0.98 0.75 4750 900
PA1005.100QNL 1:100 20 2.00 0.75 5500 900
PA1005.125QNL 1:125 20 3.00 0.75 6500 900
1power.pulseelectronics.com P790.E (04/19) http://www.power.pulseelectronics.com/contact
SMT Current Sense Transformer