For more information, visit http://asia.idec.com
G-007
1. Insert the Crimping Terminal
2. Push the Screw Down
3. Tighten the Screw
•Molded from UL94V-0 material with excellent ame and shock
resistance.
•Terminal blocks can be mounted on a 35-mm-wide DIN rail and
30-mm-wide IEC type C rail.
DIN Rail IEC Type C Rail
•9.5-mm-wide marking strips can be used on all models.
17-mm-wide sliding type marking strips also available.
(BN10W to BN30W)
•Terminal blocks of different shapes and capacities can be installed
without using an end plate. (BN/BNH10W to BN/BNH30W)
•Screw and stud terminals available for large capacity terminal blocks.
•Additional mounting and removal of terminals is easy.
(BN10W to BN150W)
•Complies with JIS C 8201-7-1.
•UL recognized, CSA certied, and EN compliant (TÜV approved).
(Except common terminal)
•UL recognized for eld wiring (FW2).
Push the screw down to temporarily
hold the wire in place.
The screws can be tightened easily with
a pneumatic screwdriver.
Terminal screw is always in the open
position. No need to loosen the screw.
Touch-down terminal blocks reduce wiring time.
(BNH-W/BNDH-W Series)
Terminal Blocks
BN-W
BNH-W Series
UL recognized, CSA certied, and TÜV
compliant.
Self-lifting and touch-down terminals
available.
•See website for details on approvals and standards.
For more information, visit http://eu.idec.com
Download catalogs and CAD from http://asia.idec.com/downloads G-008
BN-W / BNH-W Series Terminal Blocks
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
Ratings/Terminal Screw Tightening Torque
Style
Part No. UL/CSA Ratings EN Ratings (∗1) JIS Ratings Terminal
Screw
Tightening
Torque
(N·m)
Self-Lifting Touch-Down Voltage/
Current
Wire Size
(AWG)
Voltage/
Current
Wire Size
[mm2/(AWG)]
Voltage/
Current
Wire Size
(mm2)
Standard
BN10W BNH10W 600V/15A 22-16 660V/16A 1.25/(22-16) 800V/16A 1.25 M3 0.6 to 1.0
BN15MW BNH15MW 600V/15A 22-14 660V/22A 2/(22-14) 800V/16A 1.25 (2) ∗2M3 0.6 to 1.0
BN15LW BNH15LW 600V/20A 22-14 660V/22A 2/(22-14) 630V/21A 2 M3.5 1.0 to 1.3
BN15MWT BNH15MWT 600V/15A 22-14 660V/22A 2/(22-14) 800V/21A 2 M3.5 1.0 to 1.3
BN15LWT BNH15LWT 600V/30A 22-14 660V/22A 3.5/(22-14) 630V/30A 3.5 M4 1.4 to 2.0
BN30W BNH30W 600V/35A 18-10 660V/38A 5.5/(18-10) 630V/40A 5.5 M4 1.4 to 2.0
BN40W BNH40W 600V/40A 16-8 660V/50A 8/(16-8) 630V/50A 8 M5 2.6 to 3.7
BN50W BNH50W 600V/60A 16-6 660V/67A 14/(16-6) 800V/70A 14 M5 2.6 to 3.7
Large Capacity
BN75W 600V/80A 16-4 660V/94A 22/(8-4) 1000V/94A 22 M6 3.9 to 5.4
BN100W 600V/100A 16-2 660V/132A 38/(2) 1000V/132A 38 M8 10 to 13.5
BN150W 600V/150A 16-1/0 660V/175A 60/(1/0) 1000V/175A 60 M8
BN150NW 600V/150A 16-1/0 660V/175A 60/(1/0) 630V/175A 60 M8 10 to 13.5
BN200BW, BN200NW600V/200A 4/0 660V/240A 100/(4/0) 800V/240A 100 M10 21 to 28
BN300BW, BN300NW600V/310A 300MCM 660V/310A 150/(300MCM) 800V/310A 150 M10
BN400BW, BN400NW600V/350A 400MCM 660V/370A 200/(400MCM) 800V/370A 200 M12 38 to 49
BN500BW, BN500NW600V/500A 500MCM 660V/430A 240/(500MCM) 800V/430A 250 M16 83 to 116
BN600NWK600V/600A 600MCM 660V/520A 300/(600MCM) 800V/520A 325 M16
With Disconnecting
Switch BNT20 — — — — — 600V/20A 5.5 M4 1.4 to 2.0
With Fuse BNF10S — — — — — 600V/10A 5.5 M4 1.4 to 2.0
BNF10N — — — — 600V/10A 5.5 M4
Double-Deck
BND15W BNDH15W 600V/10A 22-14 660V/22A 2/(22-14) 800V/16A 1.25 (2) ∗2M3 0.6 to 1.0
BND15LW BNDH15LW 600V/15A 22-14 660V/22A 2/(22-14) 800V/21A 2 M3.5 1.0 to 1.3
BND15WT BNDH15WT 600V/15A 22-14 660V/22A 2/(22-14) 800V/21A 2 M3.5 1.0 to 1.3
Common Terminal BN15MC— — — — — 600V/16A
Common Current
1.25 (2) ∗2M3 0.6 to 1.0
∗1: Ratings approved by TÜV based on EN60947-7-1.
∗2: The rated applicable wire size is 1.25 mm2, but 2 mm2 wires can also be connected. The wire size in ( ) does not comply with JIS standards.
∗3: Part No. with is UL recognized for eld wiring (FW2).
Specify the number of poles in place of .
UL recognized, CSA certified, and TÜV compliant.
Touch-down terminals reduce wiring time.
General Ratings
Dielectric Strength 2500V AC, 1 minute
Insulation Resistance 100 MΩ minimum
Operating Temperature –25 to +55°C (no freezing)
Storage Temperature –25 to +70°C (no freezing)
Operating Humidity 45 to 85% RH (no condensation)
Material
Parts Name Material
Housing Modied PPE
Bus Bars Brass (Nickel-plated)
Terminal Screw Steel (Zinc chrome-plated)
Spring Stainless steel (touch-down type only)
Download catalogs and CAD from http://eu.idec.com/downloads
For more information, visit http://asia.idec.com
G-009
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Terminal Style Part No. Ordering No. Applicable Wire
(mm2)
Terminal
Screw Width (mm) Package
Quantity Page
Standard
Self-Lifting 1-pole
16A BN10W BN10WPN50 1.25 M3 7 50
G-012BN15MW BN15MWPN50 1.25 (2) (Note) M3 8 50
21A BN15LW BN15LWPN50 2 M3.5 10.5 50
BN15MWT BN15MWTPN50 2 M3.5 8 50
G-01330A BN15LWT BN15LWTPN50 3.5 M4 10.5 50
40A BN30W BN30WPN50 5.5 M4 12 50
50A BN40W BN40WPN20 8 M5 14 20 G-014
70A BN50W BN50WPN20 14 M5 15.5 20
Touch-Down 1-pole
16A BNH10W BNH10WPN50 1.25 M3 7 50
G-012BNH15MW BNH15MWPN50 1.25 (2) (Note) M3 8 50
21A BNH15LW BNH15LWPN50 2 M3.5 10.5 50
BNH15MWT BNH15MWTPN50 2 M3.5 8 50
G-01330A BNH15LWT BNH15LWTPN50 3.5 M4 10.5 50
40A BNH30W BNH30WPN50 5.5 M4 12 50
50A BNH40W BNH40WPN20 8 M5 14 20 G-014
70A BNH50W BNH50WPN20 14 M5 15.5 20
Large Capacity (Rail Mount)
Screw
1-pole
94A BN75W BN75WPN10 22 M6 20 10 G-015
132A BN100W BN100WPN05 38 M8 26 5
175A BN150W BN150WPN05 60 M8 26 5 G-016
BN150NW BN150NWPN05 60 M8 26 5
2-pole
240A
BN200BW2 BN200BW2
100 M10 37 1 G-0173-pole BN200BW3 BN200BW3
4-pole BN200BW4 BN200BW4
2-pole
310A
BN300BW2 BN300BW2
150 M10 44 1 G-0183-pole BN300BW3 BN300BW3
4-pole BN300BW4 BN300BW4
2-pole
370A
BN400BW2 BN400BW2
200 M12 57 1 G-0193-pole BN400BW3 BN400BW3
4-pole BN400BW4 BN400BW4
Stud
2-pole
240A
BN200NW2 BN200NW2
100 M10 37 1 G-0173-pole BN200NW3 BN200NW3
4-pole BN200NW4 BN200NW4
2-pole
310A
BN300NW2 BN300NW2
150 M10 44 1 G-0183-pole BN300NW3 BN300NW3
4-pole BN300NW4 BN300NW4
2-pole
370A
BN400NW2 BN400NW2
200 M12 57 1 G-0193-pole BN400NW3 BN400NW3
4-pole BN400NW4 BN400NW4
Note The rated applicable wire size is 1.25 mm2, but 2 mm2 wires can also be connected.
The wire size in ( ) does not comply with JIS standards.
Terminal Blocks
For more information, visit http://eu.idec.com
Download catalogs and CAD from http://asia.idec.com/downloads G-010
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Terminal Style Part No. Ordering No. Applicable Wire
(mm2)
Terminal
Screw Width (mm) Package
Quantity Page
With Disconnecting Switch, Fuse
Disconnecting Switch
20A 1-pole BNT20 BNT20PN20 5.5 M4 15 20
G-021
With Fuse 10A 1-pole BNF10S-BNF10S-APN20 5.5 M4 15 20
BNF10N-BNF10N-APN20
Double-Deck Terminal Block
Self-Liting 16A 1-pole BND15W BND15WPN25 1.25 (2)∗M3 8 25
G-022
Touch-Down BNDH15W BNDH15WPN25
Self-Lifting 21A 1-pole BND15LW BND15LWPN25 2 M3.5 8 25
Touch-Down BNDH15LW BNDH15LWPN25
Self-Lifting 21A 1-pole BND15WT BND15WTPN25 2 M3.5 12 25 G-023
Touch-Down BNDH15WT BNDH15WTPN25
Common Terminal
Self-Lifting Type 16A
(Common Current)
4-pole BN15MC4 BN15MC4PN10
1.25 (2)∗M3 8 10 G-0248-pole BN15MC8 BN15MC8PN10
10-pole BN15MC10 BN15MC10PN10
∗ The wire size in ( ) does not comply with JIS standards.
The rated applicable wire size is 1.25 mm2, but 2 mm2 wires can also be connected.
Specify the fuse rating in place of . 1A: 1, 3A: 3, 5A: 5.
Terminal Style Part No. Ordering No. Applicable Wire
(mm2)
Terminal
Screw Width (mm) Package
Quantity Page
Large Capacity (Surface Mount)
Screw
2-pole
240A
BN200BW2K BN200BW2K
100 M10 37 1 G-0173-pole BN200BW3K BN200BW3K
4-pole BN200BW4K BN200BW4K
2-pole
310A
BN300BW2K BN300BW2K
150 M10 44 1 G-0183-pole BN300BW3K BN300BW3K
4-pole BN300BW4K BN300BW4K
2-pole
370A
BN400BW2K BN400BW2K
200 M12 57 1 G-0193-pole BN400BW3K BN400BW3K
4-pole BN400BW4K BN400BW4K
2-pole
430A
BN500BW2K BN500BW2K
250 M16 57 1 G-0203-pole BN500BW3K BN500BW3K
4-pole BN500BW4K BN500BW4K
Stud
2-pole
240A
BN200NW2K BN200NW2K
100 M10 37 1 G-0173-pole BN200NW3K BN200NW3K
4-pole BN200NW4K BN200NW4K
2-pole
310A
BN300NW2K BN300NW2K
150 M10 44 1 G-0183-pole BN300NW3K BN300NW3K
4-pole BN300NW4K BN300NW4K
2-pole
370A
BN400NW2K BN400NW2K
200 M12 57 1 G-0193-pole BN400NW3K BN400NW3K
4-pole BN400NW4K BN400NW4K
2-pole
430A
BN500NW2K BN500NW2K
250 M16 57 1
G-020
3-pole BN500NW3K BN500NW3K
4-pole BN500NW4K BN500NW4K
2-pole
520A
BN600NW2K BN600NW2K
325 M16 57 13-pole BN600NW3K BN600NW3K
4-pole BN600NW4K BN600NW4K
Terminal Blocks
Download catalogs and CAD from http://eu.idec.com/downloads
For more information, visit http://asia.idec.com
G-011
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Accessories (✕: Necessary)
End Plate
Rail
End Clip
Rail Mounting Clip
Dust Cover
Marking Strip
Marking Strip Fastener
Sliding Marking Strip
Jumper
Removal Tool
Surface Mount Clip
Connecting Rod
Connecting Nut
When ordering accessories, check if the accessories are necessary by referring
to the table.
✕: Necessary
: Optional
Terminal Part No.
Standard
16A to 40A
Self-Lifting
Touch-Down
BN10W, BN15MW, BN15LW, BN15MWT, BN15LWT,
BN30W ✕✕✕— — —
BNH10W, BNH15MW, BNH15LW, BNH15MWT,
BNH15LWT, BNH30W ✕✕✕— — — —
50A to 70A
Self-Lifting
Touch-Down
BN40W, BN50W, BNH40W, BNH50W ✕✕✕—— — — —
Large Capacity
Rail Mount 1-Pole
94A to 175A BN75W, BN100W, BN150W, BN150NW ✕✕✕——————
Rail Mount
240A to 370A
BN200BW, BN300BW, BN400BW
BN200NW, BN300NW, BN400NW—✕ ✕ —
Supplied
Supplied
———————
Surface Mount
240A to 520A
BN200BWK, BN300BWK, BN400BWK
BN200NWK, BN300NWK, BN400NWK
BN500BWK, BN500NWK, BN600NWK
———— ———————
With Disconnecting Switch BNT20 ✕✕✕——————
With Fuse BNF10S-A, BNF10N-A✕✕✕— ——————
Double-Deck BND15W, BND15LW, BNDH15W, BNDH15LW,
BND15WT, BNDH15WT ✕✕
∗1
✕
∗1—✕—✕
∗2✕ ✕
Common Terminal BN15MC—✕ ✕ ——————
∗1: Accessory not necessary for surface mounting.
∗2: Accessory not necessary for rail mounting.
Specify the number of poles in place of .
G-025 G-026 G-027
G-028
G-029
Page
Accessories
For more information, visit http://eu.idec.com
G-012
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Standard
Self-Lifting Terminal
Part No. BN10W 16A
M3
BN15MW 16A
M3
BN15LW 21A
M3.5
Dimensions
（When using C Rail:41）
（When using C Rail:29.5）
35
38
18
23 5
32.5
5.9
7
10.3
（When using C Rail:41）
（When using C Rail:29.5）
35
38
18
23.5
32.5
6.7
11.3
818
32.5
8.5
10.5
14.3
38
23.5(When using C Rail:29.5)
35(When using C Rail:41)
Ordering No. BN10WPN50 BN15MWPN50 BN15LWPN50
Package Quantity 50 50 50
Weight (Approx.) 6.5g 7.3g 10g
Touch-Down Terminal
Part No. BNH10W 16A
M3
BNH15MW 16A
M3
BNH15LW 21A
M3.5
Dimensions
38
18
32.5
5.9
7
10.3
23.5(When using C Rail:29.5)
35(When using C Rail:41)
18
32.5
6.7
8
11.3
38
23.5(When using C Rail:29.5)
35(When using C Rail:41)
18
32.5
8.5
10.5
14.3
38
23.5(When using C Rail:29.5)
35(When using C Rail:41)
Ordering No. BNH10WPN50 BNH15MWPN50 BNH15LWPN50
Package Quantity 50 50 50
Weight (Approx.) 7.5g 8.2g 11.2g
Standards UL/CSA EN JIS UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V 600V 660V 800V 600V 660V 630V
Wire Size ∗122-16 AWG 1.25 mm2
(22-16 AWG) 1.25 mm222-14 AWG 2 mm2
(22-14 AWG)
1.25 mm2
(2mm2 max) 22-14 AWG 2 mm2
(22-14 AWG) 2 mm2
Rated Current ∗215A 16A 16A 15A 22A 16A 20A 22A 21A
Terminal screw M3 M3 M3.5
Crimping Terminal 1.25-3 1.25-3 (2-3) 2-3.5
Max. No. of Crimping Terminals
222
Tightening Torque 0.6 to 1.0 N · m 0.6 to 1.0 N · m 1.0 to 1.3 N · m
Crimping Terminal
Dimensions (mm) ∗3
ø3.2 min.
5 max. 3.3 min.
5.8 max. 6.6 max.
ø3.2 min.
5 max. 3.3 min.
8.5 max.
5 max. 4 min.
Accessories ∗4
End Plate BNE15W
Dust Cover BNC230
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725
Marking Strip Fastner BNM3
DIN Rail/End Clip Aluminum: BAA1000, Steel: BAP1000/BNL6
C Rail/End Clip Aluminum: BNCA1000/BNL7
DIN + C Rail/End Clip Aluminum: BNJA1000/BNL6, BNL7
∗1: The wire size in ( ) does not comply with JIS standards.
∗2: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
Download catalogs and CAD from http://eu.idec.com/downloads
G-013
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Standard
Self-Lifting Terminal
Part No. BN15MWT 21A
M3.5
BN15LWT 30A
M4
BN30W 40A
M4
Dimensions
38
17.5
32.5
6.7
8
11.3
23.5(When using C Rail:29.5)
35(When using C Rail:41)
17.5
32.5
8.5
10.5
14.3
38
23.5(When using C Rail:29.5)
35(When using C Rail:41)
19.4
35.5
9.6
12
15.8
38
25.4(When using C Rail:31.4)
38(When using C Rail:44)
Ordering No. BN15MWTPN50 BN15LWTPN50 BN30WPN50
Package Quantity 50 50 50
Weight (Approx.) 7g 10g 15.6g
Touch-Down Terminal
Part No. BNH15MWT 21A
M3.5
BNH15LWT 30A
M4
BNH30W 40A
M4
Dimensions
17.5
32.5
6.7
8
11.3
38
23.5(When using C Rail:29.5)
35(When using C Rail:41)
38
17.5
32.5
8.5
10.5
14.3
23.5(When using C Rail:29.5)
35(When using C Rail:41)
19.4
38
35.5
9.6
12
15.8
25.4(When using C Rail:31.4)
38(When using C Rail:44)
Ordering No. BNH15MWTPN50 BNH15LWTPN50 BNH30WPN50
Package Quantity 50 50 50
Weight (Approx.) 8g 11g 16.8g
Standards UL/CSA EN JIS UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V 600V 660V 630V 600V 660V 630V
Wire Size ∗122-14 AWG 2 mm2
(22-14 AWG) 2 mm222-14 AWG 3.5 mm2
(22-14 AWG) 3.5 mm218-10 AWG 5.5 mm2
(18-10 AWG) 5.5 mm2
Rated Current ∗215A 22A 21A 30A 22A 30A 35A 38A 40A
Terminal screw M3.5 M4 M4
Crimping Terminal 1.25-3.5 to 2-3.5 1.25-4 to 3.5-4 1.25-4 to 5.5-4
Max. No. of Crimping Terminals
222
Tightening Torque 1.0 to 1.3 N·m 1.4 to 2.0 N·m 1.4 to 2.0 N · m
Crimping Terminal
Dimensions (mm) ∗34.7 max. 3.6 min.
ø3.6 min.
6.6 max.
4.3 min.
4.7 max.
ø4.3 min.
8.5 max. 9.5 max.
ø4.2 min.
6 max. 4.5 min.
Accessories ∗4
End Plate BNE15W BNE30W
Dust Cover BNC230 BNC230
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/725
Marking Strip Fastner BNM3
DIN Rail/End Clip Aluminum: BAA1000, Steel: BAP1000/BNL6
C Rail/End Clip Aluminum: BNCA1000/BNL7
DIN + C Rail/End Clip Aluminum: BNJA1000/BNL6, BNL7
∗1: The wire size in ( ) does not comply with JIS standards.
∗2: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
For more information, visit http://eu.idec.com
G-014
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Standard
Self-Lifting Terminal
Part No. BN40W 50A M5 BN50W 70A M5
Dimensions
42.5
34.4
28.4
22.4
43 17.8
14
12
When using C Rail:50
When using 35mm DIN Rail:44
42.5
34.3
28.3
48
24.4
13
15.5
18
When using C Rail:50
When using 35mm DIN Rail:44
Ordering No. BN40WPN20 BN50WPN20
Package Quantity 20 20
Weight (Approx.) 25g 25.4g
Touch-Down Terminal
Part No. BNH40W 50A M5 BNH50W 70A M5
Dimensions
12
14
42.5
17.8
22.4
43
34.4
28.4
When using C Rail:50
When using 35mm DIN Rail:44
42.5
34.3
28.3
48
24.4
13
15.5
18
When using C Rail:50
When using 35mm DIN Rail:44
Ordering No. BNH40WPN20 BNH50WPN20
Package Quantity 20 20
Weight (Approx.) 25g 29g
Standards UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 630V 600V 660V 800V
Wire Size ∗116-8 AWG 8 mm2
(16-8 AWG) 8 mm216-6 AWG 14 mm2
(16-6 AWG) 14 mm2
Rated Current ∗240A 50A 50A 60A 67A 70A
Terminal screw M5 M5
Crimping Terminal 1.25-5 to 8-5 1.25-5 to 14-5
Max. No. of Crimping Terminals
2 2
Tightening Torque 2.6 to 3.7 N · m 2.6 to 3.7 N · m
Crimping Terminal
Dimensions (mm) ∗3
6.3 min.
6.8 max.
ø5.2 min.
11.8 max.
4.5 min.6.5 max.
12.8 max.
ø5.2 min.
Accessories ∗4
End Plate BNE40W BNE50W
Dust cover BNC330 BNC320
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/725
Marking Strip Fastner BNM3
DIN Rail/End Clip Aluminum: BAA1000, Steel: BAP1000/BNL6 Aluminum: BAA1000, Steel: BAP1000/BNL8
C Rail/End Clip Aluminum: BNCA1000/BNL7 Aluminum: BNCA1000/BNL8
DIN + C Rail/End Clip Aluminum: BNJA1000/BNL6, BNL7 Aluminum: BNJA1000/BNL8
∗1: The wire size in ( ) does not comply with JIS standards.
∗2: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
Download catalogs and CAD from http://eu.idec.com/downloads
G-015
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Large Capacity
Screw Terminal
Part No. BN75W 94A M6 BN100W 132A M8
Dimensions
17
20
22.5
16.7
41.5
26
53
18.2
BAA1000
44.2 (when using BNCA, BNCP: 50)
Dust Cover (BNC420)
50.5
35
29
23
26
29.8
33
63
When using C Rail:58
When using 35mm DIN Rail:52
Ordering No. BN75WPN10 BN100WPN05
Package Quantity 10 5
Weight (Approx.) 45g 86g
Standards UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 1000V 600V 660V 1000V
Wire Size 16-4 AWG 22 mm2
(8-4 AWG) 22 mm216-2 AWG 38 mm2
(2AWG) 38 mm2
Rated Current ∗180A 94A 94A 100A 132A 132A
Terminal screw ∗2M6 M8
Crimping Terminal 2-6 to 22-6 2-8 to 38-8
Max. No. of Crimping Terminals
2 2
Socket Wrench 12.7 mm square drive hexagonal socket 10 (∗4) 12.7 mm square drive hexagonal socket 13 (∗2)
Tightening Torque 3.9 to 5.4 N · m 10 to 13.5 N · m
Crimping Terminal
Dimensions (mm) ∗3
Accessories ∗5
End Plate BNE75W BNE100W
Dust Cover BNC420 BNC520
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725
Marking Strip Fastner BNM3
DIN Rail/End Clip Aluminum: BAA1000, Steel: BAP1000/BNL8
Type C Rail/End Clip Aluminum: BNCA1000/BNL8
DIN+Type C Rail/End Clip Aluminum: BNJA1000/BNL8
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the
recommended tightening torque.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: Applicable wrench or screwdriver can be used to tighten screws.
∗5: See G-025 for details on accessories.
6 min.
8.5 max.
ø6.2 min.
16.8 max.
10 min.
11 max.
ø8.5 min.
22.8 max.
For more information, visit http://eu.idec.com
G-016
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Large Capacity
Screw Terminal
Part No. BN150W 175A M8 BN150NW 175A M8
Dimensions
50.5
35
29
23
26
29.8
33
63
74
When using C Rail:58
When using 35mm DIN Rail:52
7.5
74
63
33
6 21.5
50.5
23
26
29.8
35mm DIN Rail
When using 35mm DIN Rail:52
(When using C Rail:58)
Ordering No. BN150WPN05 BN150NWPN05
Packaging Quantity 5 5
Weight (Approx.) 88g 95g
Standards UL/CSA EN JIS — — JIS
Specication / Ratings
Insulation Voltage 600V 660V 1000V — — 630V
Wire Size 16-1/0 AWG 60 mm2
(1/0 AWG) 60 mm2— — 60 mm2
Rated Current ∗1150A 175A 175A — — 175A
Terminal screw ∗2M8 M8
Crimping Terminal 2-8 to 60-8 2-8 to 60-8
Max. No. of Crimping Terminals
2 2
Socket Wrench 12.7 mm square drive hexagonal socket 13 (∗4) 12.7 mm square drive hexagonal socket 13 (∗2)
Tightening Torque 10 to 13.5 N · m 10 to 13.5 N · m
Crimping Terminal
Dimensions (mm) ∗322.8 max.
ø8.5 min.
11 max. 10 min.
Accessories ∗5
End Plate BNE150W
Dust Cover BNC520
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9
PVC 25m/BNM725
PVC 1m/BNM7, Fiber glass 1m/BNM9
PVC 25m/BNM725
Marking Strip Fastner BNM3
DIN Rail/End Clip Aluminum BAA1000, Steel: BAP1000/BNL8
Type C Rail/End Clip Aluminum: BNCA1000/BNL8
DIN+Type C Rail/End Clip Aluminum: BNJA1000/BNL8
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the
recommended tightening torque.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: Applicable wrench or screwdriver can be used for tightening screws.
∗5: See G-025 for details on accessories.
Download catalogs and CAD from http://eu.idec.com/downloads
G-017
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Large Capacity
Screw Terminal
Part No. BN200BW 240A M10 BN200BWK 240A M10
Dimensions
37
65 1.5
433
34
66.5 (all rail types)
90 (between
terminal screws: 46)
Dust Cover
Hexagonal bolt M10×19
78 (2P), 115 (3P), 152 (4P)
30 8 8
46
34
65 1 5
66.5
4
37
33
90 (between
terminal screws: 46)
Hexagonal Bolt M10×19
Dust Cover
78 (2P), 115 (3P), 152 (4P)
100 (2P), 137 (3P), 174 (4P)
3-ø8 Hole
4-M6 Screw
174 (4P)
100 (2P)
137 (3P)
30
Panel Cut-out
Package Quantity 1 1
Weight (Approx.) 2P: 430g, 3P: 650g, 4P: 870g 2P: 490g, 3P: 710g, 4P: 930g
Stud Terminal
Part No. BN200NW 240A M10 BN200NWK 240A M10
Dimensions
37
65 1.5
433
34
66.5 (all rail types)
90 (between
terminal screws: 46)
Dust Cover Bolt M10
78 (2P), 115 (3P), 152 (4P)
30 88
46
34
65 1.5
66.5
4
37
33
90 (between
terminal screws: 46)
Dust Cover Bolt M10
3-ø8 Hole
78 (2P), 115 (3P), 152 (4P)
100 (2P), 137 (3P), 174 (4P)
Panel Cut-out
4-M6 Screw
174 (4P)
100 (2P)
137 (3P)
30
Package Quantity 1 1
Weight (Approx.) 2P: 500g, 3P: 720g, 4P: 940g 2P: 560g, 3P: 780g, 4P: 1000g
Standards UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V 600V 660V 800V
Wire Size 4/0 AWG 100 mm2
(4/0 AWG) 100 mm24/0 AWG 100 mm2
(4/0 AWG) 100 mm2
Rated Current ∗1200A 240A 240A 200A 240A 240A
Terminal Screw ∗2M10 M10
Crimping Terminal 5.5-10 to 100-10 5.5-10 to 100-10
Max. No. of Crimping Terminals
2 2
Socket Wrench 12.7 mm square drive hexagonal socket 17 (∗2) 12.7 mm square drive hexagonal socket 17 (∗2)
Tightening Torque 21 to 28 N·m 21 to 28 N·m
Crimping Terminal
Dimensions (mm)∗311 min.
16 max.
ø10.5 min.
32.8 max.
Accessories (Supplied) End Plate, Dust Cover, Marking Strip are supplied.
(Note) Marking Strip Fastener (BNM3) is not necessary.
Accessories ∗4
DIN Rail Aluminum: BAA1000, Steel: BAP1000 —
C Rail Aluminum: BNCA1000 —
DIN+C Rail Aluminum: BNJA1000 —
End Clip BNL8 —
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the
recommended tightening torque.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4.
Surface Mount
Surface Mount
For more information, visit http://eu.idec.com
G-018
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Large Capacity
Screw Terminal
Part no. BN300BW 310A M10 BN300BWK 310A M10
Dimensions
74 1.5
37
4
40.5
44
104 (between
terminal screws: 50)
Dust Cover
75.5 (all rail types)
Hexagonal Bolt
M10×22
92 (2P), 136 (3P), 180 (4P)
Panel Cut-out
74 1.5
37
4
40.5
44
30
46
88
104 (between
terminal screws: 50)
Dust Cover
75.5
92 (2P), 136 (3P), 180 (4P)
114 (2P), 158 (3P), 202 (4P)
3-ø8
Hole
Hexagonal Bolt
M10×22
30
4-M6 Screw
114 (2P)
158 (3P)
202 (4P)
Package Quantity 1 1
Weight (Approx.) 2P: 480g, 3P: 750g, 4P: 1020g 2P: 540g, 3P: 810g, 4P: 1080g
Stud Terminal
Part no. BN300NW 310A M10 BN300NWK 310A M10
Dimensions
74 1.5
37
4
40.5
44
104 (between
terminal screws: 50)
Dust Cover
92 (2P), 136 (3P), 180 (4P)
75.5 (all rail types)
Bolt M10
30
4-M6 Screw
114 (2P)
158 (3P)
202 (4P)
74 1.5
37
4
40.5
44
75.5
30
46
88
104 (between
terminal screws: 50)
Dust Cover
92 (2P), 136 (3P), 180 (4P)
114 (2P), 158 (3P), 202 (4P)
Bolt M10
3-ø8
Hole
Panel Cut-out
Package Quantity 1 1
Weight (Approx.) 2P: 540g, 3P: 810g, 4P: 1080g 2P: 600g,3P: 870g, 4P: 1140g
Standards UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V 600V 660V 800V
Wire Size 300 MCM 150 mm2
(300 MCM) 150 mm2300 MCM 150 mm2
(300 MCM) 150 mm2
Rated Current ∗1310A 310A 310A 310A 310A 310A
Terminal Screw ∗2M10 M10
Crimping Terminal 5.5-10 to 150-10 5.5-10 to 150-10
Max. No. of Crimping Terminals
2 2
Socket Wrench 12.7 mm square drive hexagonal socket 17 (∗2) 12.7 mm square drive hexagonal socket 17 (∗2)
Tightening Torque 21 to 28 N·m 21 to 28 N·m
Crimping Terminal
Dimensions (mm) ∗3
11 min.
20 max.
ø10.5 min.
39.8 max.
Accessories (Supplied) End Plate, Dust Cover, Marking Strip are supplied.
(Note) Marking Strip Fastener (BNM3) is not necessary.
Accessories ∗4
DIN Rail Aluminum: BAA1000, Steel: BAP1000 —
C Rail Aluminum: BNCA1000 —
DIN+C Rail Aluminum: BNJA1000 —
End Clip BNL8 —
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the
recommended tightening torque.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4.
Surface Mount
Surface Mount
Download catalogs and CAD from http://eu.idec.com/downloads
G-019
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Large Capacity
Screw Terminal
Part no. BN400BW 370A M12 BN400BWK 370A M12
Dimensions
80 1.5
38.1
552
57
81.5 (all rail types)
120 (between
terminal screws: 62)
Dust Cover Hexagonal Bolt
M12×23
119 (2P), 176 (3P), 233 (4P)
30
4-M6 Screw
142 (2P)
199 (3P)
256 (4P)
Panel Cut-out
80 1.5
57
52 5
38.1
30
46
8
8
81.5
3-ø8
Hole
120 (between
terminal screws: 62) 119 (2P), 176 (3P), 233 (4P)
142 (2P), 199 (3P), 256 (4P)
Dust Cover Hexagonal Bolt
M12×23
Package Quantity 1 1
Weight (Approx.) 2P: 950g, 3P: 1400g, 4P: 1860g 2P: 1030g, 3P: 1480g, 4P: 1940g
Stud Terminal
Part No. BN400NW 370A M12 BN400NWK 370A M12
Dimensions
80 1.5
38.1
552
57
120 (between
terminal screws: 62)
Dust Cover
119 (2P), 176 (3P), 233 (4P)
81.5
Bolt M12
Panel Cut-out
30
4-M6 Screw
142 (2P)
199 (3P)
256 (4P)
3-ø8
Hole
80 1.5
57
52 5
38.1
30
46
8
8
81.5
120 (between
terminal screws: 62)
Dust Cover
119 (2P), 176 (3P), 233 (4P)
142 (2P), 199 (3P), 256 (4P)
Bolt M12
Package Quantity 1 1
Weight (Approx.) 2P: 980g, 3P: 1460g, 4P: 1930g 2P: 1060g, 3P: 1540g, 4P: 1990g
Standards UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V 600V 660V 800V
Wire Size 400 MCM 200 mm2
(400 MCM) 200 mm2400 MCM 200 mm2
(400 MCM) 200 mm2
Rated Current ∗1350A 370A 370A 350A 370A 370A
Terminal Screw ∗2M12 M12
Crimping Terminal 14-12 to 200-12 14-12 to 200-12
Max. No. of Crimping Terminals
2 2
Socket Wrench 12.7 mm square drive hexagonal socket 19 (∗2) 12.7 mm square drive hexagonal socket 19 (∗2)
Tightening Torque 38 to 49 N·m 38 to 49 N·m
Crimping Terminal
Dimensions (mm) ∗3
14 min.
26 max.
ø12.5 min.
50.8 max.
Accessories (Supplied) End Plate, Dust Cover, Marking Strip are supplied.
(Note) Marking Strip Fastener (BNM3) is not necessary.
Accessories ∗4
DIN Rail Aluminum: BAA1000, Steel: BAP1000 —
C Rail Aluminum: BNCA1000 —
DIN+C Rail Aluminum: BNJA1000 —
End Clip BNL8 —
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the
recommended tightening torque.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4.
Surface Mount
Surface Mount
For more information, visit http://eu.idec.com
Download catalogs and CAD from http://asia.idec.com/downloads G-020
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Large Capacity Surface Mount
Screw Terminal
Part No BN500BWK 430A M16 —
Dimensions
60
4-ø9
162 (2P)
219 (3P)
276 (4P)
90 1.5
57
52 5
42.5
60
80 8.5 8.5
91.5
4-ø9
Hole
152 (between
terminal screws: 62)
Dust Cover
119 (2P), 176 (3P), 233 (4P)
162 (2P), 219 (3P), 276 (4P)
Bolt M16×35
Panel Cut-out
—
Package Quantity 1 —
Weight (Approx.) 2P: 1550g, 3P: 2250g, 4P: 2950g —
Stud Terminal
Part No. BN500NWK 430A M16 BN600NWK 520A M16
Dimensions
60
4-ø9
162 (2P)
219 (3P)
276 (4P)
2-ø9
Hole
90 1.5
57
52 5
42.5
60
80
8.
58
.5
91.5
152 (between
terminal screws: 62) 119 (2P), 176 (3P), 233 (4P)
Dust Cover
Bolt M16
162 (2P), 219 (3P), 276 (4P)
Panel Cut-out
2-ø9
Hole
90 1.5
57
52 5
43.5
60
80
8.5 8.5
91.5
119 (2P), 176 (3P), 233 (4P)
152 (between
terminal screws: 62)
Dust Cover
162 (2P), 219 (3P), 276 (4P)
Bolt M16
Panel Cut-out
60
4-ø9
162 (2P)
219 (3P)
276 (4P)
Package Quantity 1 1
Weight (Approx.) 2P: 1600g, 3P: 2300g, 4P: 3000g 2P: 1650g, 3P: 2400g, 4P: 3150g
Standards UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V 600V 660V 800V
Wire Size 500 MCM 240 mm2
(500 MCM) 250 mm2600 MCM 300 mm2
(600 MCM) 325 mm2
Rated Current ∗1500A 430A 430A 600A 520A 520A
Terminal Screw ∗2M16 M16
Crimping Terminal 14-16 to 200-16 325-16 14-16 to 200-16 325-16
Max. No. of Crimping Termi nals
2 1 2 1
Socket Wrench 12.7 mm square drive hexagonal socket 24 (∗2) 12.7 mm square drive hexagonal socket 24 (∗2)
Tightening Torque 83 to 116 N·m 83 to 116 N·m
Crimping Terminal
Dimensions (mm) ∗3
16 min.
26 max.
ø16.5 min.
50.8 max.
Accessories (Supplied) ∗4End Plate, Dust Cover, Marking Strip are supplied.
(Note) Marking Strip Fastener (BNM3) is not necessary.
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the
recommended tightening torque.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
Specify the number of poles in place of . 2-pole: 2, 3-pole: 3, 4-pole: 4.
Surface Mount
Surface Mount Surface Mount
Download catalogs and CAD from http://eu.idec.com/downloads
G-021
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Self-Lifting Terminal with Fuse
BNF10S-A 10A
M4
BNF10N-A (With Lamp) 10A
M4
Self-Lifting Terminal with Disconnecting Switch
BNT20 20A
M4
43
63
15
13
33
27
17.5
52
When using 35mm DIN Rail: 53.5
When using C Rail: 59.5
Fuse Ratings
• Rated Voltage: 250V
• Rated Current: 1, 3, 5A
• Cartridge Fuse: JIS C 6575-2
6.35×31.8 mm or
6.40×30.0 mm
• Part No.: BNF10S-1A
BNF10S-3A
BNF10S-5A
• Cartridge used: FGB1 by FUJI Terminal
Industry Co., Ltd.
Notes: UL/CSA approved products shown
below are not supplied with fuses.
When UL/CSA approval is required
for fuse terminal blocks, use UL/
CSA-rated fuses.
• Part No.: BNF10SW
• Rated Insulation Voltage: 600V
• Rated Current: 10A
• Applicable Wire: 18-10 AWG
• UL File No.: E78117
• CSA File No.: LR64803
Fuse
Neon Lamp
• Internal Connection
43
63
15
13
33
27
17.5
52
When using 35mm DIN Rail: 53.5
When using C Rail: 59.5
Notes: Neon lamp turns on when the fuse
blows.
For the neon lamp to turn on, the volt-
ages must be from 100 to 250V AC.
Fuse Ratings
• Rated Voltage: 250V
• Rated Current: 1, 3, 5A
• Cartridge Fuse: JIS C 6575-2
6.35×31.8mm or
6.40×30.0mm
• Part No.: BNF10N-1A
BNF10N-3A
BNF10N-5A
Note: 6.4×30.0mm fuse can also be used.
42.5
43
63 17.5
15
13
33
27
When using 35mm DIN Rail: 44
When using C Rail: 50
Notes:
• Rated Current: 20A
• This terminal block cannot be used as a
disconnect switch.
• When switching on/off, make sure that
voltage is not applied.
Terminal Screw
Terminal Screw
ON OFF
Ordering
No. BNF10S-APN20 BNF10N-APN20 Ordering
No. BNT20PN20
Package
Quantity 20 20 Package
Quantity 20
Weight
(Approx.) 34g 34g Weight
(Approx.) 36g
Standards JIS JIS
Specication / Ratings
Insulation Voltage 600V 600V
Wire Size 5.5 mm25.5 mm2
Rated Current 10A max. 20A
Terminal Screw M4 M4
Crimping Terminal 1.25-4 to 5.5-4 1.25-4 to 5.5-4
Max. No. of Crimping
Terminals 2 2
Tightening Torque 1.4 to 2.0 N·m 1.4 to 2.0 N·m
Crimping Terminal Dimensions (mm)
5 min.
5.2 max.
11.3 max.
ø4.2 min.
Accessories ∗1
End Plate BNE20
Dust Cover — BNC520
Marking Strip — PVC 1m/BNM7, Fiber glass 1m/BNM9
PVC 25m/BNM725
DIN Rail/End Clip Aluminum: BAA1000, Steel: BAP1000 /BNL6
C Rail/End Clip Aluminum: BNCA1000/BNL7
DIN+C Rail/End Clip Aluminum: BNJA1000 /BNL6, BNL7
∗1: See G-025 for details on accessories.
For more information, visit http://eu.idec.com
G-022
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Double-Deck Terminal Block
Self-Lifting Terminal
Part No. BND15W 16A
M3
BND15LW 21A
M3.5
Dimensions 18
38
62
18.5
42
58.5
6.7
8
6.7
8
12
13.5
61.2(When using C Rail: 67)
8.5
10.5
8.5
10.5
15.8
17.3
62
18
38
18.5 42
59.5
62.2(When using C Rail: 68)
Ordering No. BND15WPN25 BND15LWPN25
Package Quantity 25 25
Weight (Approx.) 16g 23g
Touch-Down Terminal
Part No. BNDH15W 16A
M3
BNDH15LW 21A
M3.5
Dimensions 6.7
8
18
38
62
18.5 42
58.5
6.7
8
12
13.5
61.2(When using C Rail: 67)
8.5
10.5
8.5
10.5
15.8
17.3
62
18
38
18.5 42
59.5
62.2(When using C Rail: 68)
Ordering No. BNDH15WPN25 BNDH15LWPN25
Package Quantity 25 25
Weight (Approx.) 17g 26g
Standards UL/CSA EN JIS UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V 600V 660V 800V
Wire Size 22-14 AWG 2 mm2
(22-14 AWG)
1.25 mm2
(2 mm
2
max)
22-14 AWG 2 mm2
(22-14 AWG)
2 mm2
Rated Current ∗110A 22A 16A 15A 22A 21A
Terminal Screw ∗2M3 M3.5
Crimping Terminal 1.25-3 (2-3) 2-3.5
Max. No. of Crimping Terminals
2 2
Tightening Torque 0.6 to 1 N·m 1 to 1.3 N·m
Crimping Terminal (mm) ∗3
6.6 max.
ø3.2 min.
5 max. 3.3 min.
8.5 max.
ø3.6 min.
5 max. 4 min.
Accessories ∗4
End Plate
BNDE15W/BNDE15W2
BNDE15LW/BNDE15LW2
Dust Cover Upper Deck: BNC230, Lower Deck: BNC240
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725
Marking Strip Fastener BNM3
Surface Mounting Clip BNDL2
Connecting Rod/
Connecting Nut Connecting Rod: BNR1, BNR2, Connecting Nut: BNN1
DIN Rail/End Clip Aluminum: BAA1000, Steel: BAP1000/BNL6
C Rail/End Clip Aluminum: BNCA1000/BNL7
DIN+C Rail/End Clip Aluminum: BNJA1000/BNL6, BNL7
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: The grooves on the head of the hex bolt are for temporary tightening. For proper tightening, use an applicable socket wrench and tighten within the range of the
recommended tightening torque.
∗3: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗4: See G-025 for details on accessories.
Download catalogs and CAD from http://eu.idec.com/downloads
G-023
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Double-Deck Terminal Block
Self-Lifting Terminal
Part No. BND15WT 21A
M3.5
Dimensions
6.7
8
6.7
8
12
13.5
38
17.5
62
18.5
42
58.5
61.2(When using C Rail: 67)
Ordering No. BND15WTPN25
Package Quantity 25
Weight (Approx.) 17g
Touch-Down Terminal
Part No. BNDH15WT 21A
M3.5
Dimensions
55.5
49.5
18
38
62
8
6.7
8
12
When using DIN Rail: 61
When using C Rail: 67
58.5
Ordering No. BNDH15WTPN25
Package Quantity 25
Weight (Approx.) 17g
Standards UL/CSA EN JIS
Specication / Ratings
Insulation Voltage 600V 660V 800V
Wire Size 22-14 AWG 2mm2
(22-14 AWG)
2 mm2
Rated Current ∗115A 22A 21A
Terminal Screw M3
Crimping Terminal 1.25-3.5 to 2-3.5
Max. No. of Crimping Terminals
2
Tightening Torque 1.0 to 1.3 N·m
Crimping Terminal (mm) ∗2
4.7 max. 3.6 min.
ø3.6 min.
6.6 max
.
Accessories ∗3
End Plate
BNDE15W/BNDE15W2
Dust Cover Upper Deck: BNC230, Lower Deck: BNC240
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725
Marking Strip Fastener BNM3
Surface Mounting Clip BNDL2
Connecting Rod/
Connecting Nut Connecting Rod: BNR1, BNR2, Connecting Nut: BNN
DIN Rail/End Clip Aluminum: BAA1000, Steel: BAP1000/BNL6
C Rail/End Clip Aluminum: BNCA1000/BNL7
DIN+C Rail/End Clip Aluminum: BNJA1000/BNL6, BNL7
∗1: The rated current differs according to operating conditions. See “Selecting Terminal Blocks by Current According to JIS Standards” on G-006.
∗2: Use a CSA certied crimping terminal when using the terminal block as a CSA certied product.
∗3: See G-025 for details on accessories.
For more information, visit http://eu.idec.com
G-024
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks
Common Terminal
Self-Lifting Terminal
Part No. BN15MC4
16A (common current)
M3
BN15MC8
16A (common current)
M3
BN15MC10
16A (common current)
M3
No. of Poles 4 8 10
Shape
Terminal
Terminal
Common
Terminal
Terminal
Common
Terminal
Terminal
Common
Dimensions
32.5
6.7
8
29.5
23.5
18
38
When using 35mm DIN Rail: 35
Jumper side: 24.1
Jumper side: 30.1
When using C Rail: 41
37 (4P), 69 (8P),85 (10P)
Ordering No.
BN15MC4PN10 BN15MC8PN10 BN15MC10PN10
Package Quantity 10 10 10
Weight (Approx.) 30g 57g 70g
Color Light Gray Light Gray Light Gray
Standards JIS
Specication / Ratings
Insulation Voltage 600V
Wire Size 1.25 mm2 (2 mm2 max.)
Rated Current 16A/Common Current
Terminal Screw M3
Crimping Terminal 1.25-3 (2-3)
Max. No. of Crimping
Terminals 2
Tightening Torque 0.6-1.0 N·m
Crimping Terminal
Dimensions (mm)
6.6 max.
ø3.2 min.
5 max. 3.3 min.
Accessories ∗5
End Plate Supplied
Dust Cover BNC230
Marking Strip PVC 1m/BNM7, Fiber glass 1m/BNM9, PVC 25m/BNM725
Marking Strip Fastener BNM3
DIN Rail / End Clip Aluminum: BAA1000, Steel: BAP1000/BNL6
C Rail / End Clip Aluminum: BNCA1000/BNL7
DIN+C Rail / End Clip Aluminum: BNJA1000/BNL6, BNL7
∗1: The rated applicable wire size is 1.25 mm2, but 2mm2 wires can also be connected.
The wire size in ( ) does not comply with JIS standards.
∗2: Do not remove the built-in common jumper. Common terminal type terminal blocks cannot be disassembled.
∗3: Make sure that all terminal screws are tightened to an appropriate tightening torque before power is applied.
∗4: Specications are in compliance with JIS C 8201-7-1 except values in ( ).
∗5: See G-025 for details on accessories.
L0
L1
L2
L3
L4
L5
L6
L7
CPU IN OUT
(+
)
(–)
PLC
L0 to L7: Load
BN15MC4
Features
• All terminals are short-circuted by a built-in common jumper. External jump ers are not required.
• Accessories (marking strip, cover, and rails) are compatible with standard types.
• Common terminal type terminal blocks can be combined with other standard types as they are
identical in shape and in size as BN15MW.
• Color: Light Gray
Application Example
Download catalogs and CAD from http://eu.idec.com/downloads
G-025
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Accessories (End Plate / Rail)
End Plates
Used for ends of terminal blocks. Also used to hold the marking strips in place.
38
5BNE15W
38
5BNE30W
48
5BNE50W
53
5BNE75W
74
5BNE150W
63
5BNE100W
63
3BNE20
43
5BNE40W
End Plate
Part No. Ordering No. Applicable
Terminal Blocks Thickness (mm) Weight
(Approx.)
Package
Quantity
BNE15W BNE15WPN10
BN10W, BNH10W
BN15MW, BNH15MW
BN15LW, BNH15LW
BN15MWT, BNH15MWT
BN15LWT, BNH15LWT
5.0 4g
10
BNE20 BNE20PN10
BNT20, BNF10S, BNF10N
3.0 8g
BNE30W BNE30WPN10 BN30W, BNH30W 5.0 4g
BNE40W BNE40WPN10 BN40W, BNH40W 5.0 5g
BNE50W BNE50WPN10 BN50W, BNH50W 5.0 6g
BNE75W BNE75WPN10 BN75W 5.0 6g
BNE100W BNE100WPN10 BN100W 5.0 9g
BNE150W BNE150WPN10 BN150W, BN150NW 5.0 10g
BNDE15W BNDE15WPN10 BND15W, BND15WT,
BNDH15W, BNDH15WT
Upper deck: 5.0
Lower deck: 9.0 5.5g
BNDE15LW BNDE15LWPN10 BND15LW, BNDH15LW Upper deck: 5.0
Lower deck:
10.25
6g
End
Plate for
Securing
End Plate
BNDE15W2 BNDE15W2PN10 BND15W, BND15WT,
BNDH15W, BNDH15WT
Upper deck: 5.5
Lower deck: 1.5 5.5g
BNDE15LW2
BNDE15LW2PN10
BND15LW, BNDH15LW Upper deck: 6.8
Lower deck: 1.5 6g
Note: BNDE15W2 and BNDE15LW2 are end plates used for securing marking strips at the end of double deck terminal blocks.
Securing a marking strip with the
end plate
62
BNDE15W
BDNE15LW
BNDE15W
Upper deck: 5 mm
Lower deck: 9 mm
BDNE15LW
Upper deck: 5 mm
Lower deck: 10.25 mm
62
BNDE15W2
BNDE15LW2
BNDE15W2
Upper deck: 5.5 mm
Lower deck: 1.5 mm
BDNE15LW2
Upper deck: 6.8 mm
Lower deck: 1.5 mm
Rails
Rails for mounting terminal blocks. Available in four styles.
BNCA
812.5
5.5
30
16
15
1.5
BAA
BAP:27
BAA:31
BAP:1
BAA:1.7
BAP
12.512.5
5.5
35
25
7.5
BNJA
12.512.5
5.5
30
16
15.5
21.5
2
25
35
8
8
C30 Rail DIN Rail
35-mm-wide
DIN 35-mm
+ C30 Rail
Approvals:
IEC60715
JIS C 2812
BNCA BAA
BAP
BNJA
Length Part No. Ordering No. Material Weight (Approx.) Package Quantity
1000 mm
BNCA1000 BNCA1000PN10 Aluminum 260g 10
BAA1000 BAA1000PN10 Aluminum 200g 10
BAP1000 BAP1000PN10 Steel 320g 10
BNJA1000 BNJA1000PN10 Aluminum 340g 10
For more information, visit http://eu.idec.com
Download catalogs and CAD from http://asia.idec.com/downloads G-026
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Accessories (End Clip / Rail Mounting Clip / Dust Cover)
End Clips
Used to secure the ends of the terminal blocks assembled on the rail.
BNL6 (M4 Screw)
Tightening torque: 1.1 N·m
BNL7 (M4 Screw) BNL8 (M4 Screw)
•Material: Steel
•Plating: Trivalent zinc chromate
45
24
928
12.1
23.4
46
14.4
32.5
Note: Slide the end clip onto the DIN rail.
Part No. Ordering No. Rails For Terminal Blocks up
to BND and BN40
For BN50 and
BN75
For Terminal Blocks
BN100 and
larger
Weight
(Approx.)
Package
Quantity
BNL6 BNL6PN10 BAA, BAP × ×(∗2) — 15.2g 10
BNL7 BNL7PN10 BNCA, BNCP, BNJA × ×(∗2) — 16g 10
BNL8 BNL8PN10 BAA, BAP, BNCA, BNCP,
BNJA — (∗1) × × 56g 10
∗1: Do not use BNL8 because the insulation distance will be insufecient if used.
∗2: We recommend you to use BNL8 for secure hold.
Rail Mounting Clips
Used to raise the DIN rail from the panel surface.
BNS3
2-M5
2-ø5.2
36.7
25°
15
26
15
28
12.5
30
12.5
54
2.6
BNS4
2-M5
2-ø5.2
76.7
25°
15
26
15
28
12.5
30
12.5
54
2.6
Part No. Ordering No. Weight
(Approx.)
Package
Quantity
BNS3 BNS3PN10 51.3g 10
BNS4 BNS4PN10 76.2g 10
•Material: Steel
•Plating: Trivalent zinc chromate
Dust Cover Material: Polycarbonate
BNC1000BNC230 BNC330 BNC320 BNC420 BNC520 BAC820 BNC240BNC930
Length
Width (mm)
Part No. Ordering No. Terminal Blocks (: No. of Poles)
Weight (Approx.)
Package Quantity
1m
39.6 BNC230 BNC230PN10
BN10W, BNH10W, BN15MW, BNH15MW, BN15LW,
BNH15LW, BN30W, BNH30W, BN15MWT, BNH15MWT,
BN15LWT, BNH15LWT
56g 10
43 BNC330 BNC330PN10 BN40W, BNH40W 57g 10
49.6 BNC320 BNC320PN10 BN50W, BNH50W 64g 10
54.6 BNC420 BNC420PN10 BN75W 72g 10
65 BNC520 BNC520PN10 BN150W, BN150NW, BNT20, BN100W 96g 10
82 BAC820 BAC820PN10 BN200BW(K), BN200NW(K) 204g 10
96 BNC910 BNC910PN10 BN300BW(K), BN300NW(K) 222g 10
110 BNC1000 BNC1000PN10 BN400BW(K), BN400NW(K) 256g 10
145 BNC930 BNC930PN10 BN500BW(K), BN500NW(K), BN600NW(K) 310g 10
Dust Covers for Double Deck Terminal Blocks
Length Part No. Ordering No. Terminal Block Weight (Approx.) Package Quantity
1m
Upper Deck BNC230 BNC230PN10 BND15W, BNDH15W,
BND15LW, BNDH15LW, BND15WT,
BNDH15WT
56g 10
Lower Deck BNC240 BNC240PN10 15g 10
Download catalogs and CAD from http://eu.idec.com/downloads
For more information, visit http://asia.idec.com
G-027
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Accessories (Marking Strips / Marking Strip Fastener / Slide Marking Strip)
Marking Strips, Marking Strip Fastener
Item Part No. Ordering No. Weight
(approx.)
Package
Quantity Specication
Marking Strip
BNM7 BNM7PN10 7.2g 10 PVC (glossy surface)
1000 mm ×9.5 mm ×0.5 mm
BNM9 BNM9PN10 6.4g 10 Fiber glass (matte surface)
1000 mm ×9.5 mm ×0.5 mm
BNM725 BNM725 — 1 PVC (matte surface)
25 m ×9.5 mm ×0.5 mm
Marking Strip
Fastener BNM3 BNM3PN50 0.1g 50
BNM7 BNM9 BNM3
•To install the marking strip fastener
160mm
9.5mm
ø75mm
Sliding Marking Strip (BN10W to BN30W)
17-mm-wide marking strip
•Both top and bottom sides of the marking strip
holder can be used.
End plate (Thickness 5 mm)
BNES15W
BNES30W
Terminal Block
BN10W to BN15LWT
BN30W
17-mm-wide
Marking Strip
Marking Strip Holder
Item Part No. Ordering No. Terminal Blocks Specication Package Quantity
➀ End Plate BNES15W BNES15WPN10 BN10W to BN15LWT For sliding marking strip 10
BNES30W BNES30WPN10 BN30W For sliding marking strip 10
➁ Marking Strip BNM5 BNM5PN10 BN10W to BN15LWT
BN30W
PVC (Note) 10
➂ Marking Strip Holder BNMH1 BNMH1PN10 1m 10
➃ Dust Cover BNCS230 BNCS230PN10 1m 10
Note: Length 1000 mm ×Width 9.5 mm ×Thickness 0.5 mm
Installing the Sliding Marking Strip
When sliding the mark ing
strip holder, slide by
holding both edges of the
holder.
To lock the marking strip
holder, lock by holding
both edges of the holder.
Marking Strip Holder
3
Recess
Recess
Marking Strip Holder
Marking Strip
Marking Strip
3
2
Slide
Lock
1. Insert the marking strip into the groove of
the top of the marking strip holder.
2. Installing the end plate
Attach the end plates to the terminal blocks and
secure with end clips.
3. Insert the marking strip holder into the
recess of the end plate.
4. Press the dust cover to t
onto the bottom groove of
the end plate.
Movement
•Sliding movement of the marking strip holder
1End Plate
End Clip (BNL6)
4Dust Cover
•To lock the marking strip holder
For more information, visit http://eu.idec.com
Download catalogs and CAD from http://asia.idec.com/downloads G-028
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Accessories (Jumper)
Jumpers for 6 Poles (Material: Brass, Plating: Nickel-plated, Insulation: PVC)
Part No. Ordering No. Terminal
Centers Insulation Dimensions Current
(Note 1, 2)
Applicable
Terminal Block
Weight
(Approx.)
Package
Quantity
BNJ16 BNJ16PN10
7 mm
Without
Ring Terminal
10A BN10W
BNH10W
2.8g
10
BNJ16B BNJ16BPN10 With 10
BNJ16F BNJ16FPN10 Without
Fork Terminal
2.7g
10
BNJ16FB BNJ16FBPN10 With 10
BNJ26W BNJ26WPN10
8 mm
Without
Ring Terminal
20A
BN15MW
BNH15MW
BN15MWT
BNH15MWT
BND15W
BNDH15W
BND15WT
BNDH15WT
3.1g
10
BNJ26WB BNJ26WBPN10 With 10
BNJ26FW BNJ26FWPN10 Without
Fork Terminal
3.1g
10
BNJ26FWB BNJ26FWBPN10 With 10
BNJ46 BNJ46PN10
10.5 mm
Without
Ring Terminal
20A
BN15LW
BNH15LW
BN15LWT
BNH15LWT
BND15LW
BNDH15LW
4.6g
10
BNJ46B BNJ46BPN10 With 10
BNJ46F BNJ46FPN10 Without
Fork Terminal
3.0g
10
BNJ46FB BNJ46FBPN10 With 10
BNJ56 BNJ56PN10
12 mm
Without
Ring Terminal
30A BN30W
BNH30W
3.2g
10
BNJ56B BNJ56BPN10 With 10
BNJ56F BNJ56FPN10 Without
Fork Terminal
4.5g
10
BNJ56FB BNJ56FBPN10 With 10
•Insulation color: Black, Insulation material: PVC
Note 1: Ensure that the total current to the jumper does not exceed the maximum current.
Note 2: Ensure that the current does not exceed the rated current of the terminal block to be used.
Jumper for 2 poles
Part No. Ordering No. Terminal
Centers Insulation Dimensions Current
(Note 1, 2)
Applicable
Terminal Block
Package
Quantity
BNJ62 BNJ62PN10
14.5 mm
Without
Ring Terminal
80A
BN40W (Note 3)
BNH40W (Note 3)
BN50W
BNH50W
10
BNJ62B BNJ62BPN10 With
•Material: nickel-coated brass
•Sheath: PVC
Note 1: Ensure that the total current to the jumper does not exceed the maximum current.
Note 2: Ensure that the current does not exceed the rated current of the terminal block to be used.
Note 3: BN40W and BNH40: Do not install adjacently.
Insulation
ø3.7
11
4
7
5.7
35 (6-pole)
2
0.8
1.4
Insulation
3.7
35 (6-pole)
4 11
1.85
R
7
3.7
5.7
2
1.4
0.8
4.5 11
8
40 (6-pole)
6.4
2
0.8
1.4
ø3.7
Insulation
4.5 11
8
40 (6-pole)
3.7
6.4
2
4.5
R1.8
5
1.4
0.8
Insulation
Insulation
2.8
5.5 11
10.5
52.5 (6-pole)
8.2
ø4.2
0.8
1.
4
Insulation
2.8
5.5 11
10.5
4.5
8.2
R2.1
4.2
52.5 (6-pole)
1.4
0.8
Insulation
6 9.5
12
1.7
60 (6-pole)
ø4.2
9.3 0.8
1.4
Insulation
6 9.5 5.8
12
1.7
60 (6-pole)
R2.1
4.2 9.3 1.4
0.8
25.8
ø7(hole
s)
14.5
20.6
22.2
29.4 8
11.6
Download catalogs and CAD from http://eu.idec.com/downloads
For more information, visit http://asia.idec.com
G-029
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Accessories (Removal Tool)
A tool for removing terminal blocks from the DIN rail.
Part No.
Weight (Approx.) Package Quantity
BND2 8.6g 1
•Material: Steel
•Plating: Zinc
Note: Cannot be used for terminal blocks other than BN10W,BNH10W,
BN15MW,BNH15MWT,BN15LW,BNH15LW,BN15LWT,BNH15LWT,
BN30W,and BNH30W.
13
20
23
824
92
6
15
Accessories for BND Double-Deck Terminal Blocks
Surface Mounting Clip
13 38
30
26
Part No.
Ordering No.
Applicable
Terminal Block
Weight (Approx.)
Package Quantity
BNDL2 BNDL2PN10
BND15W, BNDH15W
BND15WT, BNDH15WT
BND15LW, BNDH15LW
14.3g 10
•Material: Steel
•Plating: Zinc
Connecting Rods
Part No.
Ordering No. Applicable
Terminal Block
Weight
(Approx.)
Dimensions (mm)
Package
Quantity
BNR1 BNR1PN10 BND15W, BNDH15W
BND15WT, BNDH15WT
BND15LW, BNDH15LW
21g 265 mm (M4×0.7) 10
BNR2 BNR2PN10 43g 500 mm (M4×0.7) 10
•Material: Steel
•Plating: Zinc
Connecting Nuts
6
ø7
M4×0.7 Hex Nut
M4×0.7 Round Nut
Part No.
Ordering No.
Applicable
Terminal Block
Weight
(Approx.) Package Quantity
BNN1 BNN1PN1H
BND15W, BNDH15W
BND15WT, BNDH15WT
BND15LW, BNDH15LW
14g 100
(pairs of both nuts)
•Material: Steel
•Plating: Zinc
For more information, visit http://eu.idec.com
G-030
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Rail Length (Double-Deck)
BNR
BNDE15W
End Plate
Terminal Block
Connecting
Rod BAA/BAP
Rail
End Clip
BNL6
9
35
4.5
L2 (Mounting Centers)
L
1
(Rail Length)
L
3
(Terminal Block Length)
Calculating the length (mm)
Part No.
BND15W
BNDH15W
BND15WT
BND15LW
BNDH15LW
L1 (∗1) 12.5 × N
L2 (∗1) L1 – 25
L3 (∗1, ∗2) 8 × n + 9 10.5 × n + 10.3
Connecting Rod Length (∗1, ∗2) 8 × n + 8.7 10.5 × n + 10
N: Rounded up numerical number from the calculated value of M.
(Example: N for 19.1 is 20)
10.5 × n + 10.3 + 62.5
12.5
(8 × n + 9 + 62.5)
12.5 M =
M =
For BND15W, BNDH15W, BND15WT
For BND15LW, BNDH15LW
Mounting Centers (Double-Deck)
BNR
Terminal Block
Connecting
Rod
Connecting
Nut
Connecting Nut
BNN1
Spring Washer M4
Surface Mounting Clip
BNDL2
BNN1
7
5
Mounting Centers
28
38
7.6
13.6
BNDE15W
End Plate
Calculating the length (mm)
Part No.
BND15W
BNDH15W
BND15WT
BND15LW
BND15HLW
Mounting Centers (∗1, ∗2) 8 × n + 24.2 10.5 × n + 25.5
Connecting Rod Length (∗1, ∗2)
8 × n + 20.2 10.5 × n + 21.5
n: The number of terminal blocks
Calculating Rail Lengths and Mounting Centers
78 (2P)
115 (3P)
152 (4P)
119 (2P)
176 (3P)
233 (4P)
92 (2P)
136 (3P)
180 (4P)
BN100W
BN15MWT (BNH15MWT)
BN15MW (BNH15MW)
BN400BW2 (BN400NW2)
BN10W (BNH10W)
BN30W (BNH30W)
BN40W (BNH40W)
BN50W (BNH50W)
BN75W
BNT20
BN150W BNE150W
BNE20
BNF10S
BN15LWT (BNH15LWT)
BN15LW (BNH15LW) BN200BW2 (BN200NW2)
BN300BW2 (BN300NW2)
52
40
33
13
15
13
15
23
5
26
23
26
17
20
13
15.5
12
14
12
10.5
87
9.6
8.5
6.7
6
L1 (Rail Length)
L2 (Mounting Centers)
3
12.5
• BNCA, BAA, BAP, and BNJA Rails
L1 = 12.5 × N
L2 = L1 – 25
Note: This formula is for calculating the maximum rail length including
tolerance. Depending on the combination of termi nal blocks, the
required rail length may be shorter than the calculated value,
particularly when many terminal blocks are combined.
N: Rounded up numerical number from the calculated value of M. (Example: N
for 19.1 is 20)
(A + 0.1) n + B + C
12.5
M =
A: Thickness of each terminal block
B: Thickness of end plate
C: Thickness of end clip when using 2 pieces of:
BNL6 = 56.0 mm
BNL7 = 62.5 mm
BNL8 = 67.0 mm
n: The number of terminal blocks
∗1: This formula is for calculating the maximum rail length including tolerance. Depending on the combination of terminal blocks, the required rail length may be
shorter than the calculated value, particluarly when many terminal blocks are combined.
∗2: The length will be 1.5 mm longer when end plates BNDE15W2 and BNDE15LW2 are used.
Download catalogs and CAD from http://eu.idec.com/downloads
For more information, visit http://asia.idec.com
G-031
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Instructions
How to Use Touch-Down Terminals
1. With the terminal screws in the
up position, insert a ring crimping
terminal.
2. Push down the head of the
screw lightly to hold the crimping
terminal.
3. When the wiring is in posi tion,
tighten all the screws
simultaneously.
4. To remove the wiring, loosen the
screw and lightly push up.
Installation and Removal on Rails
Additional Installation and Removal
(on DIN Rail)
Removal Pull Out
Installation Push
Notes: The following terminal blocks can be added or removed:
BN10W, BNH10W, BN15MW, BNH15MW, BN15LW, BNH15LW, BN30W,
BNH30W, BN15MWT, BNH15MWT, BN15LWT, BNH15LWT
Securing the Ends of the Marking Strip
The ends of the marking strip can be secured with a mark ing strip fastener
(or end plate).
To Secure the Marking Strip Installing End Plate
Insert
For double-deck, use an end plate to secure marking strips
(BNDE15W2, BNDE15LW2).
Installation of Double-Deck Terminal Blocks (BND)
Rail Mount (photo: when using BND15W, BNDH15W, BNDE15W2)
End Plate
BNDE15W
Connecting Nut
BNN1
Rail
BAA/BAP
Terminal Block
BNR
Connecting Rod
Connecting Nut
BNN1
End Clip
BNL6
BND15W/BNDH15W
1. Install end plate. Then mount the terminal blocks onto the DIN rail.
2. I nsert connecting rod (BNR) through each hole of the ter minal
blocks.
3. Secure the ends of the connecting rods with connecting nuts
(BNN1).
4. To prevent side-to-side movement on the DIN rail, use the BNL6 end
clips at both ends of the rail.
Surface Mount
End Plate
BNDE15W
Connecting Nut
BNN1
BNDL2
Terminal Block
BNR
Connecting Rod
Connecting Nut
BNN1
Surface Mounting
Clip
BNDL2
Surface
Mounting Clip
BND15W/BNDH15W
1. Assemble a row of terminal blocks with end plates on exposed ends.
2. Use BNDL2 mounting clips at both ends of a row.
3. With the two holes of the mounting clip (BNDL2) aligned with the
terminal block holes, insert a connecting rod (BNR) through each
hole.
4. Secure the ends of the connecting rods with the connect ing nuts
(BNN1).
For more information, visit http://eu.idec.com
Download catalogs and CAD from http://asia.idec.com/downloads G-032
APEM
Switches &
Pilot Lights
Control Boxes
Emergency
Stop Switches
Enabling
Switches
Safety Products
Explosion Proof
Terminal Blocks
Relays & Sockets
Circuit
Protectors
Power Supplies
LED Illumination
Controllers
Operator
Interfaces
Sensors
AUTO-ID
Terminal Blocks
BN
BN-W / BNH-W Series Terminal Blocks Series
Instructions
Dust Covers on the Lower Deck Terminal of Double-Deck Terminal Blocks
Installing Dust Covers on Lower Deck Terminals
Groove
Groove
Push in
Lower Dec
k
Dust Cover
1. Press the lower end of the dust cover into
the groove.
2. With the lower end of the dust cover pressed
into the groove, push in the top end in the
direction of the arrow.
Removing Dust Covers from Lower Deck Terminals
Turn the power off before removing the dust cover.
1
2
3
1. Hold the end of the dust cover which is extruding from the
end plate.
2. Lift up in the direction of the arrow.
3. If the dust cover cannot be removed all at
once, place ngers between the terminal
block and dust cover, and slowly remove the
dust cover.
Length of Double-Deck Dust Covers
Lower-Deck Dust Cover
BNC240
Upper-Deck Dust Cover
BNC230
Cut required length depending on the number of terminal blocks used. (Length in mm)
Terminal Block
Dust
Cover
1-pole 2-pole 3-pole 4-pole 5-pole 6-pole 7-pole 8-pole n-pole
BND(H)15W
BND(H)15WT
Upper
Deck
12 20 28 36 44 52 60 68 8 (n+1) – 4
Lower
Deck
16 24 32 32 48 56 64 72 8 (n+1)
BND(H)15LW
Upper
Deck
16 26.5 37 47.5 58 68.5 79 89.5
10.5 (n+1) – 5
Lower
Deck
21 31.5 42 52.5 63 73.5 84 94.5 10.5 (n+1)
Securing Marking Strip with Marking Strip Fasteners for Double-Deck Terminal Blocks
Because marking strips can be secured
without using marking strip fasteners,
installation time can be shortened.
Also, marking strips can be inserted and
removed after instal lation.
Marking Strip
End Plate for Fastening
Marking Strips
End Plate
Terminal Block
BNDE15W2
BNDE15LW2
BND(H)15W
BND(H)15WT
BND(H)15LW
BNDE15W
BNDE15LW
BNM7
BNM9
BNM725
BND(H)15W
BND(H)15WT
BND(H)15LW
BNDE15W
BNDE15LW
BNDE15W2
BNDE15LW2 Marking Strip
BNM7
BNM9
BNM725
Terminal Block
End Plate
End Plate for Fastening
Marking Strips
Notes on Wiring
Crimping Terminals
•When using crimping terminals, be sure to use insulated terminals to prevent electric shocks.
Without Crimping Terminals
•Insert the wire until the insulation comes into contact with the terminal metal part.
•Strip the insulation so that the wire is longer than the width of the wire clamp.
•When connecting two wires, use wires of the same size.
Wire
Terminal Clip
Washer
Width
Download catalogs and CAD from http://eu.idec.com/downloads