http://www.tracopower.com Page 1 of 3
DC/DC Converters
TES 1V Series, 1 Watt
Features
◆ Small SMD package with standard
footprint
◆ I/O isolation voltage 3000 VDC
◆ Unregulated device
◆ Single- and dual output models
◆ High efficiency up to 80%
◆ Operating temperature range
–40°C to +85°C
◆ High accuracy of pin co-planarity
◆ Qualified for leadfree reflow solder
process according IPC/JEDEC J-STD-020D
◆ Available in tape and reel package
◆ 3-year product warranty
The TES-1V series are miniature, 1W DC/DC-converters with high isolation in a
SMD package. With a new package design these converters are qualified for the
higher temperatures requested by lead-free reflow solder processes. With the small
footprint, these converters are the ideal solution for board level power distribution,
mainly for applications in the industrial- and telecom field. For automated SMD pro-
duction lines the devices can be supplied in standard tape and reel package.
Order code Input voltage Output voltage Output current max. Efficiency typ.
TES 1-0510V 3.3 VDC 260 mA 72 %
TES 1-0511V 5.0 VDC 200 mA 75 %
TES 1-0512V 12 VDC 84 mA 79 %
TES 1-0513V 5 VDC ±10% 15 VDC 67 mA 80 %
TES 1-0521V
(nominal 5 VDC) ±5 VDC ±100 mA 75 %
TES 1-0522V ±12 VDC ±42 mA 79 %
TES 1-0523V ±15 VDC ±34 mA 80 %
TES 1-1210V 3.3 VDC 260 mA 73 %
TES 1-1211V 5.0 VDC 200 mA 76 %
TES 1-1212V 12 VDC 84 mA 80 %
TES 1-1213V 12 VDC ±10% 15 VDC 67 mA 81 %
TES 1-1221V (nominal 12 VDC) ±5 VDC ±100 mA 76 %
TES 1-1222V ±12 VDC ±42 mA 80 %
TES 1-1223V ±15 VDC ±34 mA 80 %
TES 1-2410V 3.3 VDC 260 mA 70 %
TES 1-2411V 5.0 VDC 200 mA 73 %
TES 1-2412V 12 VDC 84 mA 79 %
TES 1-2413V 24 VDC ±10% 15 VDC 67 mA 79 %
TES 1-2421V (nominal 24 VDC) ±5 VDC ±100 mA 73 %
TES 1-2422V ±12 VDC ±42 mA 79 %
TES 1-2423V ±15 VDC ±34 mA 79 %
Models
http://www.tracopower.com
Input Specifications
Input current no load / full load 5 Vin models: 30 mA / 260 mA typ.
12 Vin models: 15 mA / 110 mA typ.
24 Vin models: 8 mA / 55 mA typ.
Surge voltage (1 sec. max.) 5 Vin models: 9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse voltage protection 0.3 A max.
Input filter internal capacitor
Output Specifications
Voltage set accuracy see graphs below
Voltage balance (dual output models, balanced load) ±1.0 % max.
Regulation – Input variation 1.2 % / 1 % change Vin
– Load variation see graphs below
Ripple and noise (20 MHz Bandwidth) 100 mVpp max.
Temperature coefficient ±0.02 %/K max.
Short circuit protection limited 0.5 sec. max.
Capacitive load 3.3 & 5.0 VDC models: 33 µF max.
12 & 15 VDC models: 4.7 µF max.
±5.0 VDC models: 10 µF max.
±12 & ±15 VDC models: 2.2 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Storage –40°C to +125°C
– Case +95°C max.
Derating (convection cooling) 4 %/K above +75°C
Humidity (non condensing) 95 % rel. H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2 Mio h
I/O isolation voltage (60 sec.) 3000 VDC
I/O isolation capacitance (100 kHz, 1 V) 60 pF typ.
I/O isolation resistance (500 VDC) >10 Gohm
Switching frequency 50 to 150 kHz (depending on load)
DC/DC Converters
TES 1V Series 1 Watt
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 2 of 3
Output voltage variation dependent on load (at nominal input voltage)
100%20%0
0%
-10%
+10%
Deviation of Vout nom.
Output Load
max
.
min.
typ.
+20%
+5%
-5%
+15%
40% 60% 80%
3.3 & 5.0 VDC models:
100%20%0
0%
-10%
+10%
Deviation of Vout nom.
Output Load
max
.
min.
typ.
+20%
+5%
-5%
+15%
40% 60% 80%
other models:
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Outline Dimensions
DC/DC Converters
TES 1V Series 1 Watt
Rev. October 23, 2018
Dimensions in [mm], () = Inch
Pin pitch tolerances: ±0.13 (±0.005)
Other tolerances: ±0.25 (± 0.01)
Page 3 of 3
Physical Specifications
Casing material non-conductive plastic (UL 94V-0 rated)
Weight 2.0 g ( 0.07oz)
Lead-free reflow solder process as per J-STD-020D.1 (to find at:
www.jedec.org - free registration rqueired)
Moisture sensitivity level (MSL) level 2 as per J-STD-033B.1 (to find at:
www.jedec.org - free registration required)
Washing process not recommended. Product non-hermetical
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
1.82.542.542.545.08
(0.07) (0.10) (0.10) (0.10)(0.20)
0.33 (0.01)
8.0 (0.31)
8.0 (0.31)
16.3 (0.64)
123 56
12 11 10 87
0.25
0-4°
S
1.5(0.06)
5.5(0.22)
11.0 (0.43)
5.5(0.22)
Top view
Ø1.0(Ø 0.04) vent hole (for reflow soldering process)
3.0
(0.12)
3.0
(0.12)
Pin Single Dual
1–Vin (GND) –Vin (GND)
2+Vin +Vin
3No con. No con.
5–Vout Common
6No con. –Vout
7No con. No con.
8+Vout +Vout
10 No con. No con.
11 No con. No con.
12 No con. No con.
Pin-Out
No con. = Pin to be isolated from
circuitry
1.9 (0.07)
2.54
(0.10)
12.0 (0.47)
1.0
(0.04)
5.08
(0.20)
Solder pad dimension
Supporting documents: www.tracopower.com/overview/tes1v
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TRACO Power:
TES 1-1222V TES 1-1211V TES 1-0510V TES 1-0511V TES 1-1212V TES 1-1223V TES 1-2413V TES 1-2421V
TES 1-1210V TES 1-2412V TES 1-1213V TES 1-2422V TES 1-0521V TES 1-0522V TES 1-1221V TES 1-0513V
TES 1-0523V TES 1-2410V TES 1-2411V TES 1-0512V TES 1-2423V
