LVR www.vishay.com Vishay Dale Wirewound Resistors, Precision Power, Low Value, Commercial, Axial Lead FEATURES DESIGN SUPPORT TOOLS * Ideal for all types of current sensing applications including switching and linear power supplies, instruments and power amplifiers * Excellent load life stability * Low temperature coefficient * Low inductance * MIL-PRF-49465 qualified, type RLV resistors can be found at: www.vishay.com/doc?30283 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 click logo to get started Available Available Available Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Models Available STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL MODEL POWER RATING P25 C W RESISTANCE RANGE (1) TOLERANCE % TECHNOLOGY WEIGHT (typical) g LVR01 LVR-1 1 0.01 to 0.1 (2) 1, 3, 5, 10 Metal strip 0.5 LVR03 LVR-3 3 0.005 to 0.2 1, 3, 5, 10 Metal strip 2 LVR05 LVR-5 5 0.005 to 0.3 1, 3, 5, 10 Metal strip 5 LVR10 LVR-10 10 0.01 to 0.8 1, 3, 5, 10 Coil spacewound 11 GLOBAL MODEL Notes (1) Resistance is measured 3/8" [9.52 mm] from the body of the resistor, or at 1.183" [30.05 mm], 1.315" [33.40 mm], 1.675" [42.545 mm] or 2.575" [65.405 mm] spacing for the LVR01, LVR03, LVR05 and LVR10 respectively (2) LVR01: Standard resistance values are 0.01 , 0.015 , 0.02 , 0.025 , 0.03 , 0.033 , 0.04 , 0.05 , 0.051 , 0.06 , 0.068 , 0.07 , 0.08 , 0.09 and 0.1 with 1 % tolerance. Other resistance values may be available upon request TECHNICAL SPECIFICATIONS PARAMETER UNIT LVR01 Operating Temperature Range C -65 to +175 Dielectric Withstanding Voltage VAC 1000 Insulation Resistance Short Time Overload - Terminal Strength (minimum) lb Maximum Working Voltage LVR03 LVR05 LVR10 -65 to +275 1000 1000 1000 10 000 M minimum dry 5 x rated power for 5 s 5 10 x rated power for 5 s 10 V 10 (P x 10 R)1/2 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: LVR055L000FS73 (visit www.vishay.net Vishay Dale parts numbering manual for all options) L V R 0 5 5 L 0 0 0 F S 7 3 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL LVR01 LVR03 LVR05 LVR10 R = decimal L = m (values < 0.010 ) R1500 = 0.15 7L000 = 0.007 D = 0.5 % F = 1.0 % G = 2.0 % H = 3.0 % J = 5.0 % K = 10.0 % E12 = lead (Pb)-free bulk E03 = lead (Pb)-free lacer pack (LVR10) E70 = lead (Pb)-free, tape / reel 1000 pieces (LVR01, 03) E73 = lead (Pb)-free, tape / reel 500 pieces (dash number) (up to 3 digits) From 1 to 999 as applicable Revision: 15-Nov-17 B12 = tin / lead bulk L03 = tin / lead lacer pack (LVR10) S70 = tin / lead, tape / reel 1000 pieces (LVR01, 03) S73 = tin / lead, tape/reel 500 pieces Document Number: 30206 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LVR www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] DIMENSIONS in inches [millimeters] MODEL 1.50 [38.10] (1) minimum A C B A 0.010 [0.254] B 0.010 [0.254] C 0.002 [0.051] LVR01 0.427 [10.85] 0.115 [2.92] 0.020 [0.508] LVR03 0.560 [14.22] 0.205 [5.21] 0.032 [0.813] LVR05 0.925 [23.50] 0.330 [8.38] 0.040 [1.02] LVR10 1.828 [46.43] 0.392 [9.96] 0.040 [1.02] MATERIAL SPECIFICATIONS DERATING Element: Self-supporting nickel-chrome alloy (LVR10 also utilizes manganin) RATED POWER IN % Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown Encapsulation: High temperature mold compound Terminals: Tinned copper Part Marking: Dale, model, wattage, value, tolerance, date code 120 100 80 LVR03 LVR05 LVR10 60 Packaging: Reference "Wirewound Through Hole Resistor Packaging" (www.vishay.com/doc?21028) 40 LVR01 20 0 - 65 - 25 25 75 125 175 225 275 AMBIENT TEMPERATURE IN C TEMPERATURE COEFFICIENT (ppm/C) LVR01 LVR03 LVR05 LVR10 1000 for 0.01 to 0.0249 400 for 0.025 to 0.0499 300 for 0.05 to 0.0749 250 for 0.075 to 0.099 150 for 0.1 to 0.1 850 for 0.005 to 0.0099 350 for 0.01 to 0.0249 200 for 0.025 to 0.0499 125 for 0.05 to 0.0749 75 for 0.075 to 0.099 50 for 0.1 to 0.2 650 for 0.005 to 0.0099 250 for 0.01 to 0.0249 150 for 0.025 to 0.0499 100 for 0.05 to 0.0749 75 for 0.075 to 0.099 50 for 0.1 to 0.3 300 for 0.01 to 0.0249 150 for 0.025 to 0.0499 125 for 0.05 to 0.0749 100 for 0.075 to 0.099 50 for 0.1 to 0.8 PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock -65 C to +125 C, 5 cycles, 15 min at each extreme (0.2 % + 0.0005 ) R Short Time Overload 5x rated power (LVR01, 03, 05), 10 x rated power (LVR10) for 5 s (0.5 % + 0.0005 ) R Low Temperature Storage -65 C for 24 h (0.2 % + 0.0005 ) R High Temperature Exposure 250 h at +275 C (+175 C for LVR01) (2.0 % + 0.0005 ) R Dielectric Withstanding Voltage 1000 VRMS, 1 min (0.1 % + 0.0005 ) R Insulation Resistance MIL-STD-202 Method 302, 100 V Moisture Resistance MIL-STD-202 Method 106, 7b not applicable (0.2 % + 0.0005 ) R Shock, Specified Pulse MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks (0.1 % + 0.0005 ) R Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each (0.1 % + 0.0005 ) R Load Life 2000 h at rated power, +25 C, 1.5 h "ON", 0.5 h "OFF" (2.0 % + 0.0005 ) R Bias Humidity +85 C, 85 % RH, 10 % bias, 1000 h (1.0 % + 0.0005 ) R Revision: 15-Nov-17 1000 M minimum Document Number: 30206 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000