Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FOD420, FOD4208, FOD4216, FOD4218 6-Pin DIP High dv/dt Random Phase Triac Drivers Features Description * 300 mA On-State Current * High Blocking Voltage - 600 V (FOD420, FOD4216) - 800 V (FOD4208, FOD4218) * High Trigger Sensitivity - 1.3 mA (FOD4216, FOD4218) - 2 mA (FOD420, FOD4208) * High Static dv/dt (10,000 V/s) * Safety and Regulatory Approvals: - UL1577, 5,000 VACRMS for 1 Minute - DIN-EN/IEC60747-5-5 The FOD420, FOD4208, FOD4216 and FOD4218 devices consist of an infrared emitting diode coupled to a hybrid random phase triac formed with two inverse parallel SCRs which form the triac function capable of driving discrete triacs. The FOD4216 and FOD4218 utilize a high efficiency infrared emitting diode which offers an improved trigger sensitivity. These devices are housed in a standard 6-pin dual in-line (DIP) package. Applications * * * * * Solid-State Relays Industrial Controls Lighting Controls Static Power Switches AC Motor Starters Functional Schematic ANODE 1 Package Outlines 6 MAIN TERM. 6 6 1 CATHODE 2 1 5 NC* N/C 3 4 MAIN TERM. 6 1 Figure 2. Package Outlines *DO NOT CONNECT (TRIAC SUBSTRATE) Figure 1. Schematic (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers October 2016 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Characteristics < 150 VRMS Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage I-IV I-IV < 300 VRMS Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol VPR 175 Parameter Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 1360 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1594 Vpeak VIORM Maximum Working Insulation Voltage 850 Vpeak VIOTM Highest Allowable Over-Voltage 6000 Vpeak External Creepage 7 mm External Clearance 7 mm DTI Distance Through Insulation (Insulation Thickness) 0.4 mm TS Case Temperature(1) 175 C IS,INPUT PS,OUTPUT RIO Input Current (1) Output Power(1) Insulation Resistance at TS, VIO = 500 V(1) 400 mA 700 mW > 109 Note: 1. Safety limit values - maximum values allowed in the event of a failure. (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 2 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25C unless otherwise specified. Symbol Device Parameter Value Unit TSTG Storage Temperature All -55 to +150 C TOPR Operating Temperature All -55 to +100 C Junction Temperature All -55 to +125 C Lead Solder Temperature All 260 for 10 sec C Total Device Power Dissipation @ 25C All 500 mW Derate Above 25C All 6.6 mW/C IF Continuous Forward Current All 30 mA VR Reverse Voltage All 6 V Total Power Dissipation 25C Ambient All 50 mW Derate Above 25C All 0.71 mW/C FOD420, FOD4216 600 FOD4208, FOD4218 800 TJ TSOL PD(TOTAL) EMITTER PD(EMITTER) DETECTOR VDRM Off-State Output Terminal Voltage ITSM Peak Non-Repetitive Surge Current (single cycle 60 Hz sine wave) All 3 A ITM Peak On-State Current All 300 mA Total Power Dissipation @ 25C Ambient All 450 mW Derate Above 25C All 5.9 mW/C PD(DETECTOR) (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 V www.fairchildsemi.com 3 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Absolute Maximum Ratings TA = 25C unless otherwise specified. Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ. Max. Unit EMITTER VF Input Forward Voltage IF = 20 mA All 1.28 1.50 V IR Reverse Leakage Current VR = 6 V All 0.01 10 A 3 100 A 3 100 A DETECTOR ID(RMS) IR(RMS) dv/dt Peak Blocking Current, Either Direction Reverse Current Critical Rate of Rise of Off-State Voltage IF = 0, TA = 100C(2) VD = 600 V FOD420, FOD4216 VD = 800 V FOD4208, FOD4218 VD = 600 V FOD420, FOD4216 VD = 800 V FOD4208, FOD4218 VD = VDRM All TA = 100C IF = 0 A(3) (Figure 14) 10,000 V/s Notes: 2. Test voltage must be applied within dv/dt rating. 3. This is static dv/dt. See Figure 14 for test circuit. Commutating dv/dt is a function of the load-driving thyristor(s) only. (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 4 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Electrical Characteristics TA = 25C unless otherwise specified. Transfer Characteristics Symbol IFT Parameter LED Trigger Current Test Conditions Main Terminal Voltage = 5 V(4) Device Min. Typ. Max. FOD420, FOD4208 0.75 2.0 FOD4216, FOD4218 0.75 1.3 Unit mA VTM Peak On-State Voltage, Either Direction ITM = 300 mA peak, IF = Rated IFT All 2.2 3 V IH Holding Current, Either Direction VT = 3 V All 200 500 A IL Latching Current VT = 2.2 V All 5 mA VRM = VDM = 424 VAC FOD420, FOD4216, FOD4218 60 s VRM = VDM = 565 VAC FOD4208 VRM = VDM = 424 VAC FOD420, FOD4216, FOD4218 52 s VRM = VDM = 565 VAC FOD4208 tON Turn-On Time PF = 1.0, IT = 300 mA tOFF Turn-Off Time dv/dtC Critical Rate of Rise of Voltage at Current Commutation VD = 230 VRMS, ID = 300 mAPK All 10 V/s di/dtC Critical Rate of Rise of V = 230 VRMS, On-State Current Commu- D ID = 300 mAPK tation All 9 A/ms Critical Rate of Rise of Coupled Input/Output Voltage All dv(IO)/dt IT = 0 A, VRM = VDM = 424 VAC 10,000 V/s Note: 4. All devices are guaranteed to trigger at an IF value less than or equal to max IFT.Therefore, recommended operating IF lies between max IFT (2 mA for FOD420 and FOD4208 and 1.3 mA for FOD4216 and FOD4218) and the absolute max IF (30 mA). Isolation Characteristics Symbol Parameter VISO Steady State Isolation Voltage Test Conditions Device f = 60 Hz, t = 1 Minute(5) All Min. 5,000 Typ. Max. Unit VACRMS Note: 5. Isolation voltage, VISO, is an internal device dielectric breakdown rating. For this test, pins 1, 2 and 3 are common, and pins 4, 5 and 6 are common. 5,000 VACRMS for 1 minute duration is equivalent to 6,000 VACRMS for 1 second duration. (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 5 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Electrical Characteristics (Continued) )LJXUHVKRZVDW\SLFDOFLUFXLWIRUZKHQKRWOLQHVZLWFKLQJLVUHTXLUHG,QWKLVFLUFXLWWKHKRWVLGHRIWKHOLQHLV VZLWFKHGDQGWKHORDGFRQQHFWHGWRWKHFROGRUQHXWUDOVLGH7KHORDGPD\EHFRQQHFWHGWRHLWKHUWKHQHXWUDORUKRW OLQH 5LQ LV FDOFXODWHG VR WKDW ,) LV HTXDO WR WKH UDWHG ,)7 RI WKH SDUW P$ IRU )2' DQG )2' P$ IRU )2'DQG)2'7KHUHVLVWRUDQG)FDSDFLWRUDUHIRUVQXEELQJRIWKHWULDFDQGPD\RUPD\ QRWEHQHFHVVDU\GHSHQGLQJXSRQWKHSDUWLFXODUWULDFDQGORDGXVH Rin 1 6 360 7 HOT VCC FOD40 FOD408 FOD416 FOD418 2 3 5 FKPF12N80 397 4 240 VAC 0.01MF 330 7 LOAD NEUTRAL * For highly inductive loads (power factor < 0.5), change this value to 360 ohms. )LJXUH+RW/LQH6ZLWFKLQJ$SSOLFDWLRQ&LUFXLW 240 VAC R1 1 VCC Rin 2 D1 6 FOD40 FOD408 FOD416 FOD418 3 SCR 5 SCR 4 360 7 R2 D2 LOAD Figure . Inverse-Parallel SCR Driver Circuit 6XJJHVWHGPHWKRGRIILULQJWZREDFNWREDFN6&5VZLWKD)DLUFKLOGWULDFGULYHU'LRGHVFDQEH1UHVLVWRUV 5DQG5DUHRSWLRQDO7 1RWH7KLVRSWRLVRODWRUVKRXOGQRWEHXVHGWRGULYHDORDGGLUHFWO\,WLVLQWHQGHGWREHDGLVFUHWHWULDFGULYHUGHYLFH RQO\ (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 6 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Typical Application 1.6 1.4 -55C 1.2 25C 85C 1.0 0.8 0.6 0.1 1.6 IFT - NORMALIZED LED TRIGGER CURRENT VF - FORWARD VOLTAGE (V) 1.8 1 10 IF - FORWARD CURRENT (mA) VAK = 5.0 V Normalized to TA = 25C 1.4 1.2 1.0 0.8 0.6 -60 100 Figure . Forward Voltage (VF) vs. Forward Current (IF) -20 0 20 40 60 TA - AMBIENT TEMPERATURE (C) 100 100 tD = t(IF/IFT 25C) VD = 400 VP-P F = 60 Hz 0.005 0.01 1000 0.02 DF = 0.05 tD - DELAY TIME (s) Duty Factor t t 0.1 0.2 0.5 100 10 10-6 10-5 10-4 10-3 10-2 10-1 t - LED PULSE DURATION (s) 100 10 1 101 1 10 IFT/IF - NORMALIZED IF (mA) 100 Figure . Trigger Delay Time Figure . Peak LED Current vs. Duty Factor, Tau 1000 1.7 VL = 250 VP-P F = 60 Hz Normalized to DC 1.6 ITM - ON-STATE CURRENT (mA) IFTH(PW)/IFTH(DC) - NORMALIZED IFTH 80 Figure . Normalized LED Trigger Current (IFT) vs. Ambient Temperature (TA) 10000 If(pk) - PEAK LED CURRENT (mA) -40 1.5 1.4 1.3 1.2 1.1 100 TA = 100C 10 TA = 25C 1.0 0.9 0 200 400 600 PW - PULSE WIDTH (s) 800 1 1000 1 2 3 4 VTM - ON-STATE VOLTAGE (V) Figure . On-State Voltage (VTM) vs. On-State Current (ITM) Figure . Pulse Trigger Current (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 0 www.fairchildsemi.com 7 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Typical Performance Characteristics IDRM - NORMALIZED OFF-STATE CURRENT IH - NORMALIZED HOLDING CURRENT 2.2 Normalized to TA = 25C 2.0 1.8 1.6 1.4 1.2 1.0 0.8 -60 -40 -20 0 20 40 60 80 100 10 VD = 800 V, IBD (A) Normalized to TA = 25C 1 0.1 -60 -40 TA - AMBIENT TEMPERATURE (C) 0 20 40 60 80 100 Figure 1. Normalized Off-State Current (IDRM) vs. Ambient Temperature (TA) Figure 1. Normalized Holding Current (IH) vs. Ambient Temperature (TA) 350 ITP - PEAK ON-STATE CURRENT (mA) -20 TA - AMBIENT TEMPERATURE (C) ITP = f(TA) 300 250 200 150 100 50 -60 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) Figure 1. Current Reduction (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 8 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Typical Performance Characteristics (Continued) DIFFERENTIAL PREAMP 27 1000 2W 10 W WIREWOUND 6 X100 PROBE 1 DUT 2 X100 PROBE 20k 2W 0.33X) 0.047Q) 1000 V 1000 V 4 470 pF dY dt VERNIER MOUNT DUT ON TEMPERATURE CONTROLLED Cu PLATE 1 02W EACH 100 2W 0.001Q) 0.005Q) 82 2W 1.2 0 0.01Q) 2W POWER 0.047Q) 1N914 20 V 0.1Q) RFP4N100 0.47Q) 56 2W f = 10 Hz PW = 100 s 50 PULSE GENERATOR TEST 1N 1/4 W 0-1000 V 10 mA 1N967A 18 V ALL COMPONENTS ARE NON-INDUCTIVE UNLESS SHOWN GY )LJXUH&LUFXLWIRU6WDWLF0HDVXUHPHQWRI3RZHU7K\ULVWRUV GW (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 9 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers VDRM/VRRM SELECT FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Reflow Profile 245 C, 10 to 30 seconds Temperature (C) 300 260C peak 250 200 150 Time above 183C, < 160 seconds 100 50 Ramp up = 2 to 10C/second 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) * Peak reflow temperature: 26C (package surface temperature) * Time of temperature higher than 18C for 160 seconds or less * One time soldering reflow is recommendeG Figure 1. Reflow Profile (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 10 Part Number FOD420 Package Packing Method DIP 6-Pin Tube (50 Units) FOD420S SMT 6-Pin (Lead Bend) Tube (50 Units) FOD420SD SMT 6-Pin (Lead Bend) Tape and Reel (1000 Units) DIP 6-Pin, DIN EN/IEC60747-5-5 Option Tube (50 Units) FOD420SV SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tube (50 Units) FOD420SDV SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tape and Reel (1000 Units) DIP 6-Pin, 0.4" Lead Spacing, DIN EN/IEC60747-5-5 Option Tube (50 Units) FOD420V FOD420TV Note: 6. The product orderable part number system listed in this table also applies to the FOD4208, FOD4216, and FOD4218product families. Marking Information 1 V 3 )2' 2 ; <<' 6 5 4 Figure 16. Top Mark Table 1. Top Mark Definitions 1 Fairchild Logo 2 Device Number 3 VDE mark. DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 One-Digit Year Code, e.g., "6" 5 Digit Work Week, Ranging from "01" to "53" 6 Assembly Package Code (c)2004 Fairchild Semiconductor Corporation FOD420, FOD4208, FOD4216, FOD4218 Rev. 1.6 www.fairchildsemi.com 11 FOD420, FOD4208, FOD4216, FOD4218 -- 6-Pin DIP High dv/dt Random Phase Triac Drivers Ordering Information ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com