1
www.clare.com
LBA110L
DS-LBA110L-R3
LBA110L is 350V, 120mA, 35Ωindependent 1-Form-A
and 1-Form-B relays. It is designed to provide an ideal
solution where a complimentary Form-A/Form-B relay
pair is required. Current limiting version is available (“L”
suffix).
•Telecommunications
•Telecom Switching
•Tip/Ring Circuits
•Modem Switching (Laptop, Notebook, Pocket Size)
•Hookswitch
•Dial Pulsing
•Ground Start
•Ringer Injection
•Instrumentation
•Multiplexers
•Data Acquisition
•Electronic Switching
•I/O Subsystems
•Meters (Watt-Hour, Water, Gas)
•Medical Equipment-Patient/Equipment Isolation
•Security
•Aerospace
•Industrial Controls
•UL Recognized: File Number E76270
•CSA Certified: File Number LR 43639-10
•BSI Certified to:
•BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
•BS EN 41003:1993
Certificate #: 7344
•Small 8 Pin DIP Package
•Low Drive Power Requirements (TTL/CMOS
Compatible)
•No Moving Parts
•High Reliability
•Arc-Free With No Snubbing Circuits
•3750VRMS Input/Output Isolation
•FCC Compatible
•VDE Compatible
•No EMI/RFI Generation
•Machine Insertable, Wave Solderable
•Current Limiting Surface Mount and Tape & Reel
V ersions A vailable
Applications
Features
Description
Approvals
DUAL POLE OptoMOS®Relay
Ordering Information
Part # Description
LBA110L 8 Pin DIP (50/Tube)
LBA110LP 8 Pin Flatpack (50/Tube)
LBA110LPTR 8 Pin Flatpack (1000/Reel)
LBA110LS 8 Pin Surface Mount (50/Tube)
LBA110LSTR 8 Pin Surface Mount (1000/Reel)
LBA110L Units
Load Voltage 350 V
Load Current 120 mA
Max RON 35 Ω
Pin Configuration
Switching Characteristics of
Normally Closed (Form B) Devices
CONTROL
10ms
10%
90% 90%
+
+
TON
TOFF
+
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
LOAD
10ms
10% 10%
90%
+
TON TOFF
+
+
1
2
3
4
8
7
6
5
LBA110L Pinout
+ Control - Normally Closed
– Control - Normally Closed
+ Control - Normally Open
– Control - Normally Open
Normally Closed Pole
Normally Open Pole
AC/DC Configuration
www.clare.com
LBA110L
Rev. 3
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
2
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 50 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Flatpack/Surface Mount
Package - - +220 °C
(10 Seconds Max.)
1Derate Linearly 1.33 mw/˚C
2Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Voltage (Peak) - VL- - 350 V
Load Current *(Continuous)
AC/DC Configuration - IL- - 120 mA
Peak Load Current 10ms ILPK ---mA
On-Resistance
AC/DC Configuration IL=120mA RON -2335 Ω
Off-State Leakage Current VL=350V ILEAK --1µA
Switching Speeds
Turn-On IF=5mA, VL=10V TON --3ms
Turn-Off IF=5mA, VL=10V TOFF --3ms
Output Capacitance 50V; f=1MHz COUT -25- pF
Load Current Limiting Form A only ICL 130 170 210 mA
Input Characteristics @ 25°C
Input Control Current IL=Load Current IF5-50mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR--5 V
Reverse Input Current VR=5V IR- - 10 µA
Input to Output Capacitance - CI/O -3- pF
Input to Output Isolation - VI/O 3750 - - VRMS
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.
LBA110L
www.clare.com
Rev. 3
PERFORMANCE DATA*
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
3
LBA110L
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C; IF = 5mADC)
35
30
25
20
15
10
5
01.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
LBA110L - FormA
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC, IF=5mADC)
35
30
25
20
15
10
5
015.8 16.4 17.0 17.616.1 16.7 17.3
On-Resistance (Ω)
Device Count (N)
LBA110L - FormB
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC, IF=5mADC)
30
25
20
15
10
5
027.8 29.2 30.6 32.028.5 29.9 31.3
On-Resistance (Ω)
Device Count (N)
LBA110L - FormA
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
0376.8 379.8 382.8 385.8378.3 381.3 384.3
Blocking Voltage (V)
Device Count (N)
LBA110L - FormB
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
30
25
20
15
10
5
0386.3 391.3 396.3 401.3388.8 393.8 398.8
Blocking Voltage (V)
Device Count (N)
LBA110L - FormA
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
25
20
15
10
5
00.45 1.05 1.650.15 0.75 1.35 1.95
LED Current (mA)
Device Count (N)
LBA110L - FormA
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
0.5 0.9 1.30.7 1.1 1.5
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
LBA110L - FormB
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
30
25
20
15
10
5
00.7 1.1 1.5 1.91.3
LED Current (mA)
Device Count (N)
LBA110L - FormB
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
25
20
15
10
5
00.45 0.65 0.850.35 0.55 0.75 0.95
LED Current (mA)
Device Count (N)
LBA110L - FormA
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.15 0.35 0.650.25 0.45
Turn-On (ms)
Device Count (N)
25
20
15
10
5
00.55
LBA110L - FormB
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.10 0.18 0.260.14 0.22 0.30
Turn-On (ms)
Device Count (N)
30
25
20
15
10
5
0
LBA110L - FormA
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.03 0.13 0.230.180.08
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
www.clare.com
4
LBA110
Rev. 3
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA110L - FormB
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.35 0.55 0.750.650.450.25
Turn-Off (ms)
Device Count (N)
30
25
20
15
10
5
0
LBA110L - Form A
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
180
160
140
120
100
80
60
40
20
0-40 -20 0 20 40 60 80 120100
20mA
10mA
5mA
LBA110L - Form B
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
180
160
140
120
100
80
60
40
20
0-40 -20 0 20 40 60 80 120100
5mA
LBA110L
Typical Leakage vs. Temperature
(Measured across Pins 5 & 6 or 7 & 8)
Temperature (°C)
Leakage (µA)
-40
0.030
0.025
0.020
0.015
0.010
0.005
0-20 0 20 40 60 80 100
LBA110L - FormA
Typical Blocking Voltage vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
400
395
390
385
380
375
370
365
360
355 -20 0 20 40 60 80 100
LBA110L - FormB
Typical Blocking Voltage vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
410
405
400
395
390
385
380
375
370
365
360 -20 0 20 40 60 80 100
LBA110L - FormA
Typical Turn-On vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
Turn-On (ms)
-40
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15 -20 0 20 40 60 80 100
5mA
10mA
20mA
LBA110L - FormB
Typical Turn-On vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
Turn-On (ms)
-40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0 -20 0 20 40 60 80 100
5mA
LBA110L - FormA
Typical Turn-Off vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
Turn-Off (ms)
-40
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0-20 0 20 40 60 80 100
5mA
LBA110L - FormB
Typical Turn-Off vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
Turn-Off (ms)
-40
0.7
0.6
0.5
0.4
0.3
0.2
0.1 -20 0 20 40 60 80 100
5mA
10mA
20mA
LBA110L
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (°C)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8-40 -20 0 20 40 60 80 120100
50mA
30mA
20mA
10mA
5mA
LBA110L - FormA
Typical Turn-On vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
0.40
0.35
0.30
0.25
0.20
0.15
0.10 50
LBA110L
www.clare.com 5
Rev. 3
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA110L - FormB
Typical Turn-On vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
0.25
0.20
0.15
0.10
0.05 50
LBA110L - FormA
Typical Turn-Off vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.092
0.090
0.088
0.086
0.084
0.082
0.080
0.078
0.076
0.074 50
LBA110L - FormB
Typical Turn-Off vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.7
0.6
0.5
0.4
0.3
0.2
0.1
050
LBA110L - FormA
Typical On-Resistance vs. Temperature
(Load Current = 120mADC; IF = 5mADC)
Temperature (°C)
On-Resistance (Ω)
-40
20
18
16
14
12
10
8-20 0 20 40 60 80 100
LBA110L - FormB
Typical On-Resistance vs. Temperature
(Load Current = 120mADC; IF = 5mADC)
Temperature (°C)
On-Resistance (Ω)
-40
60
50
40
30
20
10
0-20 0 20 40 60 80 100
LBA110L - FormA
Typical IF for Switch Operation vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA110L - FormB
Typical IF for Switch Operation vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
3.000
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA110L - FormA
Typical IF for Switch Dropout vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA110L - FormB
Typical IF for Switch Dropout vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0-20 0 20 40 60 80 100
LBA110L - FormA
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C; IF = 5mADC)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150-2.0 -1.5 -0.5-1.0 0 0.5 1.0 1.5 2.0
LBA110L - FormB
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C; IF = 5mADC)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150 -4 -3 -1-2 0 1 2 3 4
LBA110L
Energy Rating Curve
Time
Load Current (A)
10µs
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
01ms100µs 100ms 1s
10ms 10s 100s
LBA110L
Typical Current Limiting Characteristics
vs. Temperature
IF = 5mA
Temperature (°C)
Current Limit (mA)
-40
250
200
150
100
50
0-20 0 20 40 60 80 100
www.clare.com
6
LBA110L
Rev. 3
Dimensions
mm
(inches)
Mechanical Dimensions
PC Board Pattern
(Top View)
6.350 ± .127
(.250 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .127
(.300 ± .005)
7.620 ± .127
(.300 ± .005)
8-.800 DIA.
(8-.031 DIA.)
7.239 TYP.
(.285)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
9.144 TYP.
(.360)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
9.144 ± .508
(.360 ± .020)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005 )
8 Pin DIP Through Hole (Standard)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
8.763 ± .127
(.345 ± .005)
1.193
(.047)
.787
(.031)
8 Pin Flatpack (“P” Suffix)
7.620 ± .254
(.300 ± .010)
2.159 TYP.
(.085)
2.286 MAX.
(.090)
9.398 ± .127
(.370 ± .005)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
8.077 ± .127
(.318 ± .005)
.457 ± .076
(.018 ± .003)
.203
(.008)
.635 ± .127
(.025)
PC Board Pattern
(Top View) 2.540 ± .127
(.100 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
1.498 ± .127
(.059 ± .005)
4.445 ± .127
(.175 ± .005) 3.302
(.130)
7.620 ± .254
(.300 ± .010)
6.350 ± .127
(.250 ± .005)
8.077 ± .127
(.318 ± .005)
2.540 ± .127
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
.457 ± .076
(.018 ± .003)
.254 TYP.
(.010)
.635 TYP.
(.025)
8 Pin DIP Surface Mount (“S” Suffix) 9.652 ± .381
(.380 ± .015)
LBA110L
www.clare.com 7
Rev. 3
Tape and Reel Packaging for 8 Pin Flatpack Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± 0.102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.988 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.287
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.287 ± .102
(.405 ± .004) 1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Dimensions
mm
(inches)
Mechanical Dimensions
Tape and Reel Packaging for 8 Pin Surface Mount Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± .102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.989 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.300
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.300 ± .102
(.405 ± .004) 1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
CLARE LOCATIONS
Clare Headquarters
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Clare Micronix Division
145 Columbia
Aliso Viejo, CA 92656-1490
Tel: 1-949-831-4622
Fax: 1-949-831-4628
SALES OFFICES
AMERICAS
Americas Headquarters
Clare
78 Cherry Hill Drive
Beverly, MA 01915
Tel: 1-978-524-6700
Fax: 1-978-524-4900
Toll Free: 1-800-27-CLARE
Eastern Region
Clare
P.O. Box 856
Mahwah, NJ 07430
Tel: 1-201-236-0101
Fax: 1-201-236-8685
Toll Free: 1-800-27-CLARE
Central Region
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
Western Region
Clare
1852 West 11th Street, #348
Tracy, CA 95376
Tel: 1-209-832-4367
Fax: 1-209-832-4732
Toll Free: 1-800-27-CLARE
Canada
Clare Canada Ltd.
3425 Harvester Road, Suite 202
Burlington, Ontario L7N 3N1
Tel: 1-905-333-9066
Fax: 1-905-333-1824
EUROPE
European Headquarters
CP Clare nv
Bampslaan 17
B-3500 Hasselt (Belgium)
Tel: 32-11-300868
Fax: 32-11-300890
France
Clare France Sales
Lead Rep
99 route de Versailles
91160 Champlan
France
Tel: 33 1 69 79 93 50
Fax: 33 1 69 79 93 59
Germany
Clare Germany Sales
ActiveComp Electronic GmbH
Mitterstrasse 12
85077 Manching
Germany
Tel: 49 8459 3214 10
Fax: 49 8459 3214 29
Italy
C.L.A.R.E.s.a.s.
Via C. Colombo 10/A
I-20066 Melzo (Milano)
Tel: 39-02-95737160
Fax: 39-02-95738829
Sweden
Clare Sales
Comptronic AB
Box 167
S-16329 Spånga
Tel: 46-862-10370
Fax: 46-862-10371
United Kingdom
Clare UK Sales
Marco Polo House
Cook Way
Bindon Road
Taunton
UK-Somerset TA2 6BG
Tel: 44-1-823 352541
Fax: 44-1-823 352797
ASIA/PACIFIC
Asian Headquarters
Clare
Room N1016, Chia-Hsin, Bldg II,
10F, No. 96, Sec. 2
Chung Shan North Road
Taipei, Taiwan R.O.C.
Tel: 886-2-2523-6368
Fax: 886-2-2523-6369
http://www.clare.com
Worldwide Sales Offices
Specification: DS-LBA110L-R3
©Copyright 2000, Clare, Inc.
OptoMOS®is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
2/12/01
Clare cannot assume responsibility for use of any circuitry other
than circuitry entirely embodied in this Clare product. No circuit
patent licenses nor indemnity are expressed or implied. Clare
reserves the right to change the specification and circuitry, with-
out notice at any time. The products described in this document
are not intended for use in medical implantation or other direct life
support applications where malfunction may result in direct phys-
ical harm, injury or death to a person.
